o Moving tinyprintf and stm libraries under thirdparty.

1 files changed, 0 insertions, 71 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/NOR/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/NOR/readme.txt
deleted file mode 100644
index fdf3f25..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/NOR/readme.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/**
-  @page FSMC_NOR FSMC NOR example
-  
-  @verbatim
-  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
-  * @file    FSMC/NOR/readme.txt 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Description of the FSMC NOR example.
-  ******************************************************************************
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  ******************************************************************************
-   @endverbatim
-
-@par Example Description 
-
-This example provides a basic example of how to use the FSMC firmware library and
-an associate driver to perform erase/read/write operations on the M29W128FL,
-M29W128GL or S29GL128P NOR memories mounted on the STM3210E-EVAL board.
-
-@par Directory contents 
-
-  - FSMC/NOR/stm32f10x_conf.h    Library Configuration file
-  - FSMC/NOR/stm32f10x_it.c      Interrupt handlers
-  - FSMC/NOR/stm32f10x_it.h      Header for stm32f10x_it.c
-  - FSMC/NOR/main.c              Main program
-  - FSMC/NOR/system_stm32f10x.c  STM32F10x system source file  
-
-@par Hardware and Software environment 
-
-  - This example runs only on STM32F10x High-Density and XL-Density Devices.
-  
-  - This example has been tested with STMicroelectronics STM3210E-EVAL (High-Density
-    and XL-Density) evaluation board.
-    To select the STMicroelectronics evaluation board used to run the example, 
-    uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL)
-    
-@par How to use it ? 
-
-In order to make the program work, you must do the following :
- - Copy all source files from this example folder to the template folder under
-   Project\STM32F10x_StdPeriph_Template
- - Open your preferred toolchain 
- - Rebuild all files and load your image into target memory
- - Run the example 
-
-@note
- - Low-density Value line devices are STM32F100xx microcontrollers where the 
-   Flash memory density ranges between 16 and 32 Kbytes.
- - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- - Medium-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 64 and 128 Kbytes.  
- - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- - High-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.   
- - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 512 and 1024 Kbytes.
- - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
-    
- * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
- */