o Moving tinyprintf and stm libraries under thirdparty.

1 files changed, 0 insertions, 95 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/DMA/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/DMA/readme.txt
deleted file mode 100644
index 436b3fb..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/DMA/readme.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-/**
-  @page TIM_DMA TIM DMA example
-  
-  @verbatim
-  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
-  * @file    TIM/DMA/readme.txt 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Description of the TIM DMA example.
-  ******************************************************************************
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  ******************************************************************************
-   @endverbatim
-
-@par Example Description 
-
-This example provides a description of how to use DMA with TIM1 Update request
-to transfer Data from memory to TIM1 Capture Compare Register3.
-
-TIM1CLK = SystemCoreClock, Prescaler = 0, TIM1 counter clock = SystemCoreClock
-SystemCoreClock is set to 72 MHz for Low-density, Medium-density, High-density
-and Connectivity line devices. For Low-Density Value line, Medium-Density and
-High-Density Value line devices, SystemCoreClock is set to 24 MHz.
-
-The objective is to configure TIM1 channel 3 to generate complementary PWM
-signal with a frequency equal to 17.57 KHz:
-   - TIM1_Period = (SystemCoreClock / 17570) - 1
-and a variable duty cycle that is changed by the DMA after a specific number of
-Update DMA request.
-
-The number of this repetitive requests is defined by the TIM1 Repetion counter,
-each 3 Update Requests, the TIM1 Channel 3 Duty Cycle changes to the next new 
-value defined by the SRC_Buffer.
-
-
-@par Directory contents 
-
-  - TIM/DMA/stm32f10x_conf.h    Library Configuration file
-  - TIM/DMA/stm32f10x_it.c      Interrupt handlers
-  - TIM/DMA/stm32f10x_it.h      Interrupt handlers header file
-  - TIM/DMA/main.c              Main program 
-  - TIM/DMA/system_stm32f10x.c  STM32F10x system source file
-  
-@par Hardware and Software environment 
-
-  - This example runs on STM32F10x Connectivity line, High-Density, High-Density 
-    Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density 
-    and Low-Density Value line Devices.
-  
-  - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density
-    Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), 
-    STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) 
-    evaluation boards and can be easily tailored to any other supported device 
-    and development board.
-
-  - STM32100E-EVAL, STM32100B-EVAL, STM3210C-EVAL, STM3210E-EVAL, STM32100E-EVAL and STM3210B-EVAL Set-up 
-    - Connect the following pins to an oscilloscope to monitor the different 
-      waveforms:  
-        - TIM1 CH3  (PA.10)
-        - TIM1 CH3N (PB.15)  
-  
-@par How to use it ? 
-
-In order to make the program work, you must do the following :
- - Copy all source files from this example folder to the template folder under
-   Project\STM32F10x_StdPeriph_Template
- - Open your preferred toolchain 
- - Rebuild all files and load your image into target memory
- - Run the example 
-
-@note
- - Low-density Value line devices are STM32F100xx microcontrollers where the 
-   Flash memory density ranges between 16 and 32 Kbytes.
- - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- - Medium-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 64 and 128 Kbytes.  
- - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- - High-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 512 and 1024 Kbytes.
- - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
-   
- * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
- */