o Moving tinyprintf and stm libraries under thirdparty.

1 files changed, 0 insertions, 408 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/main.c
deleted file mode 100644
index dc1832a..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/main.c
+++ /dev/null
@@ -1,408 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    USART/Smartcard/main.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-#include "platform_config.h"
-
-/* Private define ------------------------------------------------------------*/
-#define T0_PROTOCOL           0x00 /* T0 PROTOCOL */
-#define SETUP_LENGHT          20 
-#define HIST_LENGHT           20
-#define SC_Receive_Timeout    0x4000 /* direction to reader */
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup USART_Smartcard
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* ATR STRUCTURE - ANSWER TO RESET */
-typedef  struct 
-{
-  uint8_t TS; /* Bit Convention */
-  uint8_t T0; /* High Nibble = N. of setup byte; low nibble = N. of historical byte */
-  uint8_t T[SETUP_LENGHT]; /* Setup array */
-  uint8_t H[HIST_LENGHT]; /* Historical array */
-  uint8_t Tlenght; /* Setup array dimension */
-  uint8_t Hlenght; /* Historical array dimension */
-} SC_ATR;
-
-typedef enum {FAILED = 0, PASSED = !FAILED} TestStatus;
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-USART_InitTypeDef USART_InitStructure;
-USART_ClockInitTypeDef USART_ClockInitStructure; 
-SC_ATR  SC_A2R;
-__IO uint32_t index = 0, Counter = 0;
-volatile TestStatus ATRDecodeStatus = FAILED;
-__IO uint32_t CardInserted = 0, CardProtocol = 1;
-
-__IO uint8_t DST_Buffer[50]= {
-                     0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                     0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                     0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-void RCC_Configuration(void);
-void GPIO_Configuration(void);
-void EXTI_Configuration(void);
-void NVIC_Configuration(void);
-uint8_t SC_decode_Answer2reset(__IO uint8_t *card);
-
-/**
-  * @brief  Main program
-  * @param  None
-  * @retval None
-  */
-int main(void)
-{
-  /*!< At this stage the microcontroller clock setting is already configured, 
-       this is done through SystemInit() function which is called from startup
-       file (startup_stm32f10x_xx.s) before to branch to application main.
-       To reconfigure the default setting of SystemInit() function, refer to
-       system_stm32f10x.c file
-     */     
-       
-  /* System Clocks Configuration */
-  RCC_Configuration();
-       
-  /* NVIC configuration */
-  NVIC_Configuration();
-
-  /* Configure the GPIO ports */
-  GPIO_Configuration();
-
-  /* Configure the EXTI Controller */
-  EXTI_Configuration();
-
-
-/* SC_USART configuration ----------------------------------------------------*/
-  /* SC_USART configured as follow:
-        - Word Length = 9 Bits
-        - 0.5 Stop Bit
-        - Even parity
-        - BaudRate = 12096 baud
-        - Hardware flow control disabled (RTS and CTS signals)
-        - Tx and Rx enabled
-        - USART Clock enabled
-        - USART CPOL Low
-        - USART CPHA on first edge
-        - USART Last Bit Clock Enabled
-  */
-
-  /* SC_USART Clock set to 4.5MHz (PCLK1 = 36 MHZ / 8) */
-  USART_SetPrescaler(SC_USART, 0x04);
-  /* SC_USART Guard Time set to 2 Bit */
-  USART_SetGuardTime(SC_USART, 0x2);
-  
-  USART_ClockInitStructure.USART_Clock = USART_Clock_Enable;
-  USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;
-  USART_ClockInitStructure.USART_CPHA = USART_CPHA_1Edge;
-  USART_ClockInitStructure.USART_LastBit = USART_LastBit_Enable;
-  USART_ClockInit(SC_USART, &USART_ClockInitStructure);
-
-  USART_InitStructure.USART_BaudRate = 12096;
-  USART_InitStructure.USART_WordLength = USART_WordLength_9b;
-  USART_InitStructure.USART_StopBits = USART_StopBits_1_5;
-  USART_InitStructure.USART_Parity = USART_Parity_Even;
-  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
-  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
-  USART_Init(SC_USART, &USART_InitStructure);  
-
-  /* Enable the SC_USART Parity Error Interrupt */
-  USART_ITConfig(SC_USART, USART_IT_PE, ENABLE);
-
-  /* Enable SC_USART */
-  USART_Cmd(SC_USART, ENABLE);
-
-  /* Enable the NACK Transmission */
-  USART_SmartCardNACKCmd(SC_USART, ENABLE);
-
-  /* Enable the Smartcard Interface */
-  USART_SmartCardCmd(SC_USART, ENABLE);
-
-  /* Loop while no Smartcard is detected */  
-  while(CardInserted == 0)
-  {
-  }
-
-  /* Read Smartcard ATR response */ 
-  for(index = 0; index < 40; index++, Counter = 0)
-  {
-    while((USART_GetFlagStatus(SC_USART, USART_FLAG_RXNE) == RESET) && (Counter != SC_Receive_Timeout))
-    {
-      Counter++;
-    }
-
-    if(Counter != SC_Receive_Timeout)
-    {
-      DST_Buffer[index] = USART_ReceiveData(SC_USART);
-    }
-  }
-
-  /* Decode ATR */
-  CardProtocol = SC_decode_Answer2reset(DST_Buffer);
-
-  /* Test if the inserted card is ISO7816-3 T=0 compatible */
-  if(CardProtocol == 0)
-  {
-    /* Inserted card is ISO7816-3 T=0 compatible */
-    ATRDecodeStatus = PASSED;
-  }
-  else 
-  { 
-    /* Inserted Smartcard is not ISO7816-3 T=0 compatible */
-    ATRDecodeStatus = FAILED;
-  } 
-
-  while (1)
-  {   
-  }
-}
-
-/**
-  * @brief  Configures the different system clocks.
-  * @param  None
-  * @retval None
-  */
-void RCC_Configuration(void)
-{  
-  /* Enable GPIO_3_5V, SC_USART_GPIO_CLK, GPIO_CMDVCC, GPIO_RESET, GPIO_OFF and 
-     AFIO clocks */
-  RCC_APB2PeriphClockCmd(RCC_APB2Periph_3_5V | SC_USART_GPIO_CLK | RCC_APB2Periph_RESET | 
-                         RCC_APB2Periph_CMDVCC | RCC_APB2Periph_OFF | RCC_APB2Periph_AFIO, ENABLE);
-
-  /* Enable SC_USART clocks */
-  RCC_APB1PeriphClockCmd(SC_USART_CLK, ENABLE);
-}
-
-/**
-  * @brief  Configures the different GPIO ports.
-  * @param  None
-  * @retval None
-  */
-void GPIO_Configuration(void)
-{
-  GPIO_InitTypeDef GPIO_InitStructure;
-
-#ifdef USE_STM3210C_EVAL
-  /* Enable the USART3 Pins Software Full Remapping */
-  GPIO_PinRemapConfig(GPIO_FullRemap_USART3, ENABLE);
-#endif
-  /* Configure SC_USART CK as alternate function push-pull */
-  GPIO_InitStructure.GPIO_Pin = SC_USART_ClkPin;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
-  GPIO_Init(SC_USART_GPIO, &GPIO_InitStructure);
-
-  /* Configure SC_USART Tx as alternate function open-drain */
-  GPIO_InitStructure.GPIO_Pin = SC_USART_TxPin;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD;
-  GPIO_Init(SC_USART_GPIO, &GPIO_InitStructure);
-
-  /* Configure Smartcard Reset  */
-  GPIO_InitStructure.GPIO_Pin = SC_RESET;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
-  GPIO_Init(GPIO_RESET, &GPIO_InitStructure);
-
-  /* Set RSTIN HIGH */  
-  GPIO_SetBits(GPIO_RESET, SC_RESET);
-
-  /* Configure Smartcard 3/5V  */
-  GPIO_InitStructure.GPIO_Pin = SC_3_5V;
-  GPIO_Init(GPIO_3_5V, &GPIO_InitStructure);
-
-  /* Select 5 V */  
-  GPIO_SetBits(GPIO_3_5V, SC_3_5V);
-
-  /* Configure Smartcard CMDVCC  */
-  GPIO_InitStructure.GPIO_Pin = SC_CMDVCC;
-  GPIO_Init(GPIO_CMDVCC, &GPIO_InitStructure);
-
-  /* Select Smartcard CMDVCC */ 
-  GPIO_SetBits(GPIO_CMDVCC, SC_CMDVCC);
-
-  /* Select Smartcard OFF */
-  GPIO_InitStructure.GPIO_Pin = SC_OFF;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
-  GPIO_Init(GPIO_OFF, &GPIO_InitStructure);
-}
-
-/**
-  * @brief  Configures the External Interrupts controller.
-  * @param  None
-  * @retval None
-  */
-void EXTI_Configuration(void)
-{
-  EXTI_InitTypeDef EXTI_InitStructure;
-
-  /* Smartcard OFF */
-  GPIO_EXTILineConfig(SC_PortSource, SC_PinSource);
-
-  EXTI_StructInit(&EXTI_InitStructure);
-  EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
-  EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
-  EXTI_InitStructure.EXTI_Line = SC_EXTI;
-  EXTI_InitStructure.EXTI_LineCmd = ENABLE;
-  EXTI_Init(&EXTI_InitStructure);
-
-  /* Clear SC EXTI Line Pending Bit */
-  EXTI_ClearITPendingBit(SC_EXTI);
-}
-
-/**
-  * @brief  Configures the nested vectored interrupt controller.
-  * @param  None
-  * @retval None
-  */
-void NVIC_Configuration(void)
-{
-  NVIC_InitTypeDef NVIC_InitStructure;
-
-  /* Configure the NVIC Preemption Priority Bits */
-  NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
-  /* Clear the SC_EXTI IRQ Pending Bit */
-  NVIC_ClearPendingIRQ(SC_EXTI_IRQ);
-
-  NVIC_InitStructure.NVIC_IRQChannel = SC_EXTI_IRQ;
-  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
-  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
-  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
-  NVIC_Init(&NVIC_InitStructure);
-
-  NVIC_InitStructure.NVIC_IRQChannel = SC_USART_IRQn;
-  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
-  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
-  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
-  NVIC_Init(&NVIC_InitStructure);
-}
-
-/**
-  * @brief  Decode the Card ATR Response.
-  * @param  card: pointer to the buffer containing the Card ATR.
-  * @retval Card protocol
-  */
-uint8_t SC_decode_Answer2reset(__IO uint8_t *card)
-{
-  uint32_t i = 0, flag = 0, buf = 0, protocol = 0;
-
-  SC_A2R.TS = 0;
-  SC_A2R.T0 = 0;
-  for (i = 0; i < SETUP_LENGHT; i++)
-  {
-    SC_A2R.T[i] = 0;
-  }
-  for (i = 0;i < HIST_LENGHT; i++)
-  {
-    SC_A2R.H[i] = 0;
-  }
-  SC_A2R.Tlenght = 0;
-  SC_A2R.Hlenght = 0;
-
-  SC_A2R.TS = card[0]; /* INITIAL CHARACTER */
-  SC_A2R.T0 = card[1]; /* FORMAT CHARACTER */
-
-  SC_A2R.Hlenght = SC_A2R.T0 & 0x0F;
-
-  if((SC_A2R.T0 & 0x80) == 0x80) flag = 1;
-
-  for(i = 0; i < 4; i++)
-  {
-    SC_A2R.Tlenght = SC_A2R.Tlenght + (((SC_A2R.T0 & 0xF0) >> (4 + i)) & 0x1);
-  }
-
-  for(i = 0; i < SC_A2R.Tlenght; i++)
-  {
-    SC_A2R.T[i] = card[i + 2];
-  }
-
-  protocol = SC_A2R.T[SC_A2R.Tlenght - 1] & 0x0F; 
-
-  while(flag) 
-  {
-    if ((SC_A2R.T[SC_A2R.Tlenght-1] & 0x80)== 0x80)
-    {
-      flag = 1;
-    }
-    else
-    {
-      flag = 0;
-    }
-    buf = SC_A2R.Tlenght;
-    SC_A2R.Tlenght = 0;
-
-    for(i = 0; i < 4; i++)
-    {
-      SC_A2R.Tlenght = SC_A2R.Tlenght + (((SC_A2R.T[buf - 1] & 0xF0) >> (4 + i)) & 0x1);
-    }
-    for(i = 0; i < SC_A2R.Tlenght; i++)
-    {
-      SC_A2R.T[buf + i] = card[i + 2 + buf];
-    }
-    SC_A2R.Tlenght += buf;
-  }
-
-  for(i = 0;i < SC_A2R.Hlenght; i++)
-  {
-    SC_A2R.H[i] = card[i + 2 + SC_A2R.Tlenght];
-  }
-  
-  return ((uint8_t)protocol);
-}
-
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t* file, uint32_t line)
-{ 
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-
-  /* Infinite loop */
-  while (1)
-  {
-  }
-}
-
-#endif
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/