diff options
author | Trygve Laugstøl <trygvis@inamo.no> | 2017-01-25 22:24:18 +0100 |
---|---|---|
committer | Trygve Laugstøl <trygvis@inamo.no> | 2017-01-25 22:29:25 +0100 |
commit | 40e04e3772726829d66c12e69f24b03920d79c67 (patch) | |
tree | 636811bad956798c9d5d22de9e7ba8c799b8d791 /tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM32100B_EVAL/stm32100b_eval.c | |
parent | 2fff65aed2477a503c72629d27e2a330d30c02d1 (diff) | |
download | stm32f103-playground-40e04e3772726829d66c12e69f24b03920d79c67.tar.gz stm32f103-playground-40e04e3772726829d66c12e69f24b03920d79c67.tar.bz2 stm32f103-playground-40e04e3772726829d66c12e69f24b03920d79c67.tar.xz stm32f103-playground-40e04e3772726829d66c12e69f24b03920d79c67.zip |
o Moving tinyprintf and stm libraries under thirdparty.
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM32100B_EVAL/stm32100b_eval.c')
-rw-r--r-- | tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM32100B_EVAL/stm32100b_eval.c | 624 |
1 files changed, 0 insertions, 624 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM32100B_EVAL/stm32100b_eval.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM32100B_EVAL/stm32100b_eval.c deleted file mode 100644 index 947329d..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM32100B_EVAL/stm32100b_eval.c +++ /dev/null @@ -1,624 +0,0 @@ -/** - ****************************************************************************** - * @file stm32100b_eval.c - * @author MCD Application Team - * @version V4.5.0 - * @date 07-March-2011 - * @brief This file provides - * - set of firmware functions to manage Leds, push-button and COM ports - * - low level initialization functions for SD card (on SPI), SPI serial - * flash (sFLASH) and temperature sensor (LM75) - * available on STM32100B-EVAL evaluation board from STMicroelectronics. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32100b_eval.h" -#include "stm32f10x_spi.h" -#include "stm32f10x_i2c.h" - -/** @addtogroup Utilities - * @{ - */ - -/** @addtogroup STM32_EVAL - * @{ - */ - -/** @addtogroup STM32100B_EVAL - * @{ - */ - -/** @defgroup STM32100B_EVAL_LOW_LEVEL - * @brief This file provides firmware functions to manage Leds, push-buttons, - * COM ports, SD card on SPI, serial flash (sFLASH) and temperature - * sensor (LM75) available on STM32100B-EVAL evaluation board from - * STMicroelectronics. - * @{ - */ - -/** @defgroup STM32100B_EVAL_LOW_LEVEL_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - - -/** @defgroup STM32100B_EVAL_LOW_LEVEL_Private_Defines - * @{ - */ -/** - * @} - */ - - -/** @defgroup STM32100B_EVAL_LOW_LEVEL_Private_Macros - * @{ - */ -/** - * @} - */ - - -/** @defgroup STM32100B_EVAL_LOW_LEVEL_Private_Variables - * @{ - */ -GPIO_TypeDef* GPIO_PORT[LEDn] = {LED1_GPIO_PORT, LED2_GPIO_PORT, LED3_GPIO_PORT, - LED4_GPIO_PORT}; -const uint16_t GPIO_PIN[LEDn] = {LED1_PIN, LED2_PIN, LED3_PIN, - LED4_PIN}; -const uint32_t GPIO_CLK[LEDn] = {LED1_GPIO_CLK, LED2_GPIO_CLK, LED3_GPIO_CLK, - LED4_GPIO_CLK}; - -GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {WAKEUP_BUTTON_GPIO_PORT, TAMPER_BUTTON_GPIO_PORT, - KEY_BUTTON_GPIO_PORT, RIGHT_BUTTON_GPIO_PORT, - LEFT_BUTTON_GPIO_PORT, UP_BUTTON_GPIO_PORT, - DOWN_BUTTON_GPIO_PORT, SEL_BUTTON_GPIO_PORT}; - -const uint16_t BUTTON_PIN[BUTTONn] = {WAKEUP_BUTTON_PIN, TAMPER_BUTTON_PIN, - KEY_BUTTON_PIN, RIGHT_BUTTON_PIN, - LEFT_BUTTON_PIN, UP_BUTTON_PIN, - DOWN_BUTTON_PIN, SEL_BUTTON_PIN}; - -const uint32_t BUTTON_CLK[BUTTONn] = {WAKEUP_BUTTON_GPIO_CLK, TAMPER_BUTTON_GPIO_CLK, - KEY_BUTTON_GPIO_CLK, RIGHT_BUTTON_GPIO_CLK, - LEFT_BUTTON_GPIO_CLK, UP_BUTTON_GPIO_CLK, - DOWN_BUTTON_GPIO_CLK, SEL_BUTTON_GPIO_CLK}; - -const uint16_t BUTTON_EXTI_LINE[BUTTONn] = {WAKEUP_BUTTON_EXTI_LINE, - TAMPER_BUTTON_EXTI_LINE, - KEY_BUTTON_EXTI_LINE, - RIGHT_BUTTON_EXTI_LINE, - LEFT_BUTTON_EXTI_LINE, - UP_BUTTON_EXTI_LINE, - DOWN_BUTTON_EXTI_LINE, - SEL_BUTTON_EXTI_LINE}; - -const uint16_t BUTTON_PORT_SOURCE[BUTTONn] = {WAKEUP_BUTTON_EXTI_PORT_SOURCE, - TAMPER_BUTTON_EXTI_PORT_SOURCE, - KEY_BUTTON_EXTI_PORT_SOURCE, - RIGHT_BUTTON_EXTI_PORT_SOURCE, - LEFT_BUTTON_EXTI_PORT_SOURCE, - UP_BUTTON_EXTI_PORT_SOURCE, - DOWN_BUTTON_EXTI_PORT_SOURCE, - SEL_BUTTON_EXTI_PORT_SOURCE}; - -const uint16_t BUTTON_PIN_SOURCE[BUTTONn] = {WAKEUP_BUTTON_EXTI_PIN_SOURCE, - TAMPER_BUTTON_EXTI_PIN_SOURCE, - KEY_BUTTON_EXTI_PIN_SOURCE, - RIGHT_BUTTON_EXTI_PIN_SOURCE, - LEFT_BUTTON_EXTI_PIN_SOURCE, - UP_BUTTON_EXTI_PIN_SOURCE, - DOWN_BUTTON_EXTI_PIN_SOURCE, - SEL_BUTTON_EXTI_PIN_SOURCE}; - -const uint16_t BUTTON_IRQn[BUTTONn] = {WAKEUP_BUTTON_EXTI_IRQn, TAMPER_BUTTON_EXTI_IRQn, - KEY_BUTTON_EXTI_IRQn, RIGHT_BUTTON_EXTI_IRQn, - LEFT_BUTTON_EXTI_IRQn, UP_BUTTON_EXTI_IRQn, - DOWN_BUTTON_EXTI_IRQn, SEL_BUTTON_EXTI_IRQn}; - -USART_TypeDef* COM_USART[COMn] = {EVAL_COM1, EVAL_COM2}; - -GPIO_TypeDef* COM_TX_PORT[COMn] = {EVAL_COM1_TX_GPIO_PORT, EVAL_COM2_TX_GPIO_PORT}; - -GPIO_TypeDef* COM_RX_PORT[COMn] = {EVAL_COM1_RX_GPIO_PORT, EVAL_COM2_RX_GPIO_PORT}; - -const uint32_t COM_USART_CLK[COMn] = {EVAL_COM1_CLK, EVAL_COM2_CLK}; - -const uint32_t COM_TX_PORT_CLK[COMn] = {EVAL_COM1_TX_GPIO_CLK, EVAL_COM2_TX_GPIO_CLK}; - -const uint32_t COM_RX_PORT_CLK[COMn] = {EVAL_COM1_RX_GPIO_CLK, EVAL_COM2_RX_GPIO_CLK}; - -const uint16_t COM_TX_PIN[COMn] = {EVAL_COM1_TX_PIN, EVAL_COM2_TX_PIN}; - -const uint16_t COM_RX_PIN[COMn] = {EVAL_COM1_RX_PIN, EVAL_COM2_RX_PIN}; - -/** - * @} - */ - - -/** @defgroup STM32100B_EVAL_LOW_LEVEL_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - - -/** @defgroup STM32100B_EVAL_LOW_LEVEL_Private_Functions - * @{ - */ - -/** - * @brief Configures LED GPIO. - * @param Led: Specifies the Led to be configured. - * This parameter can be one of following parameters: - * @arg LED1 - * @arg LED2 - * @arg LED3 - * @arg LED4 - * @retval None - */ -void STM_EVAL_LEDInit(Led_TypeDef Led) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* Enable the GPIO_LED Clock */ - RCC_APB2PeriphClockCmd(GPIO_CLK[Led], ENABLE); - - /* Configure the GPIO_LED pin */ - GPIO_InitStructure.GPIO_Pin = GPIO_PIN[Led]; - - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(GPIO_PORT[Led], &GPIO_InitStructure); -} - -/** - * @brief Turns selected LED On. - * @param Led: Specifies the Led to be set on. - * This parameter can be one of following parameters: - * @arg LED1 - * @arg LED2 - * @arg LED3 - * @arg LED4 - * @retval None - */ -void STM_EVAL_LEDOn(Led_TypeDef Led) -{ - GPIO_PORT[Led]->BSRR = GPIO_PIN[Led]; -} - -/** - * @brief Turns selected LED Off. - * @param Led: Specifies the Led to be set off. - * This parameter can be one of following parameters: - * @arg LED1 - * @arg LED2 - * @arg LED3 - * @arg LED4 - * @retval None - */ -void STM_EVAL_LEDOff(Led_TypeDef Led) -{ - GPIO_PORT[Led]->BRR = GPIO_PIN[Led]; -} - -/** - * @brief Toggles the selected LED. - * @param Led: Specifies the Led to be toggled. - * This parameter can be one of following parameters: - * @arg LED1 - * @arg LED2 - * @arg LED3 - * @arg LED4 - * @retval None - */ -void STM_EVAL_LEDToggle(Led_TypeDef Led) -{ - GPIO_PORT[Led]->ODR ^= GPIO_PIN[Led]; -} - -/** - * @brief Configures Button GPIO and EXTI Line. - * @param Button: Specifies the Button to be configured. - * This parameter can be one of following parameters: - * @arg BUTTON_WAKEUP: Wakeup Push Button - * @arg BUTTON_TAMPER: Tamper Push Button - * @arg BUTTON_KEY: Key Push Button - * @arg BUTTON_RIGHT: Joystick Right Push Button - * @arg BUTTON_LEFT: Joystick Left Push Button - * @arg BUTTON_UP: Joystick Up Push Button - * @arg BUTTON_DOWN: Joystick Down Push Button - * @arg BUTTON_SEL: Joystick Sel Push Button - * @param Button_Mode: Specifies Button mode. - * This parameter can be one of following parameters: - * @arg BUTTON_MODE_GPIO: Button will be used as simple IO - * @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line with interrupt - * generation capability - * @retval None - */ -void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode) -{ - GPIO_InitTypeDef GPIO_InitStructure; - EXTI_InitTypeDef EXTI_InitStructure; - NVIC_InitTypeDef NVIC_InitStructure; - - /* Enable the BUTTON Clock */ - RCC_APB2PeriphClockCmd(BUTTON_CLK[Button] | RCC_APB2Periph_AFIO, ENABLE); - - /* Configure Button pin as input floating */ - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_InitStructure.GPIO_Pin = BUTTON_PIN[Button]; - GPIO_Init(BUTTON_PORT[Button], &GPIO_InitStructure); - - - if (Button_Mode == BUTTON_MODE_EXTI) - { - /* Connect Button EXTI Line to Button GPIO Pin */ - GPIO_EXTILineConfig(BUTTON_PORT_SOURCE[Button], BUTTON_PIN_SOURCE[Button]); - - /* Configure Button EXTI line */ - EXTI_InitStructure.EXTI_Line = BUTTON_EXTI_LINE[Button]; - EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; - - if(Button != BUTTON_WAKEUP) - { - EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; - } - else - { - EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; - } - EXTI_InitStructure.EXTI_LineCmd = ENABLE; - EXTI_Init(&EXTI_InitStructure); - - /* Enable and set Button EXTI Interrupt to the lowest priority */ - NVIC_InitStructure.NVIC_IRQChannel = BUTTON_IRQn[Button]; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x0F; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x0F; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - - NVIC_Init(&NVIC_InitStructure); - } -} - -/** - * @brief Returns the selected Button state. - * @param Button: Specifies the Button to be checked. - * This parameter can be one of following parameters: - * @arg BUTTON_WAKEUP: Wakeup Push Button - * @arg BUTTON_TAMPER: Tamper Push Button - * @arg BUTTON_KEY: Key Push Button - * @arg BUTTON_RIGHT: Joystick Right Push Button - * @arg BUTTON_LEFT: Joystick Left Push Button - * @arg BUTTON_UP: Joystick Up Push Button - * @arg BUTTON_DOWN: Joystick Down Push Button - * @arg BUTTON_SEL: Joystick Sel Push Button - * @retval The Button GPIO pin value. - */ -uint32_t STM_EVAL_PBGetState(Button_TypeDef Button) -{ - return GPIO_ReadInputDataBit(BUTTON_PORT[Button], BUTTON_PIN[Button]); -} - - -/** - * @brief Configures COM port. - * @param COM: Specifies the COM port to be configured. - * This parameter can be one of following parameters: - * @arg COM1 - * @arg COM2 - * @param USART_InitStruct: pointer to a USART_InitTypeDef structure that - * contains the configuration information for the specified USART peripheral. - * @retval None - */ -void STM_EVAL_COMInit(COM_TypeDef COM, USART_InitTypeDef* USART_InitStruct) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* Enable GPIO clock */ - RCC_APB2PeriphClockCmd(COM_TX_PORT_CLK[COM] | COM_RX_PORT_CLK[COM] | RCC_APB2Periph_AFIO, ENABLE); - - - /* Enable UART clock */ - if (COM == COM1) - { - RCC_APB2PeriphClockCmd(COM_USART_CLK[COM], ENABLE); - } - else - { - /* Enable the USART2 Pins Software Remapping */ - GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE); - RCC_APB1PeriphClockCmd(COM_USART_CLK[COM], ENABLE); - } - - /* Configure USART Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_InitStructure.GPIO_Pin = COM_TX_PIN[COM]; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(COM_TX_PORT[COM], &GPIO_InitStructure); - - /* Configure USART Rx as input floating */ - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_InitStructure.GPIO_Pin = COM_RX_PIN[COM]; - GPIO_Init(COM_RX_PORT[COM], &GPIO_InitStructure); - - /* USART configuration */ - USART_Init(COM_USART[COM], USART_InitStruct); - - /* Enable USART */ - USART_Cmd(COM_USART[COM], ENABLE); -} - -/** - * @brief DeInitializes the SD/SD communication. - * @param None - * @retval None - */ -void SD_LowLevel_DeInit(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - SPI_Cmd(SD_SPI, DISABLE); /*!< SD_SPI disable */ - SPI_I2S_DeInit(SD_SPI); /*!< DeInitializes the SD_SPI */ - - /*!< SD_SPI Periph clock disable */ - RCC_APB2PeriphClockCmd(SD_SPI_CLK, DISABLE); - - /*!< Configure SD_SPI pins: SCK */ - GPIO_InitStructure.GPIO_Pin = SD_SPI_SCK_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(SD_SPI_SCK_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure SD_SPI pins: MISO */ - GPIO_InitStructure.GPIO_Pin = SD_SPI_MISO_PIN; - GPIO_Init(SD_SPI_MISO_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure SD_SPI pins: MOSI */ - GPIO_InitStructure.GPIO_Pin = SD_SPI_MOSI_PIN; - GPIO_Init(SD_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure SD_SPI_CS_PIN pin: SD Card CS pin */ - GPIO_InitStructure.GPIO_Pin = SD_CS_PIN; - GPIO_Init(SD_CS_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure SD_SPI_DETECT_PIN pin: SD Card detect pin */ - GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN; - GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStructure); -} - -/** - * @brief Initializes the SD_SPI and CS pins. - * @param None - * @retval None - */ -void SD_LowLevel_Init(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - SPI_InitTypeDef SPI_InitStructure; - - /*!< SD_SPI_CS_GPIO, SD_SPI_MOSI_GPIO, SD_SPI_MISO_GPIO, SD_SPI_DETECT_GPIO - and SD_SPI_SCK_GPIO Periph clock enable */ - RCC_APB2PeriphClockCmd(SD_CS_GPIO_CLK | SD_SPI_MOSI_GPIO_CLK | SD_SPI_MISO_GPIO_CLK | - SD_SPI_SCK_GPIO_CLK | SD_DETECT_GPIO_CLK, ENABLE); - - /*!< SD_SPI Periph clock enable */ - RCC_APB2PeriphClockCmd(SD_SPI_CLK, ENABLE); - - - /*!< Configure SD_SPI pins: SCK */ - GPIO_InitStructure.GPIO_Pin = SD_SPI_SCK_PIN; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(SD_SPI_SCK_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure SD_SPI pins: MOSI */ - GPIO_InitStructure.GPIO_Pin = SD_SPI_MOSI_PIN; - GPIO_Init(SD_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure SD_SPI pins: MISO */ - GPIO_InitStructure.GPIO_Pin = SD_SPI_MISO_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(SD_SPI_MISO_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure SD_SPI_CS_PIN pin: SD Card CS pin */ - GPIO_InitStructure.GPIO_Pin = SD_CS_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(SD_CS_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure SD_SPI_DETECT_PIN pin: SD Card detect pin */ - GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; - GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStructure); - - /*!< SD_SPI Config */ - SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex; - SPI_InitStructure.SPI_Mode = SPI_Mode_Master; - SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b; - SPI_InitStructure.SPI_CPOL = SPI_CPOL_High; - SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge; - SPI_InitStructure.SPI_NSS = SPI_NSS_Soft; - SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; - - SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB; - SPI_InitStructure.SPI_CRCPolynomial = 7; - SPI_Init(SD_SPI, &SPI_InitStructure); - - SPI_Cmd(SD_SPI, ENABLE); /*!< SD_SPI enable */ -} - -/** - * @brief DeInitializes the peripherals used by the SPI FLASH driver. - * @param None - * @retval None - */ -void sFLASH_LowLevel_DeInit(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /*!< Disable the sFLASH_SPI */ - SPI_Cmd(sFLASH_SPI, DISABLE); - - /*!< DeInitializes the sFLASH_SPI */ - SPI_I2S_DeInit(sFLASH_SPI); - - /*!< sFLASH_SPI Periph clock disable */ - RCC_APB2PeriphClockCmd(sFLASH_SPI_CLK, DISABLE); - - /*!< Configure sFLASH_SPI pins: SCK */ - GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_SCK_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(sFLASH_SPI_SCK_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure sFLASH_SPI pins: MISO */ - GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MISO_PIN; - GPIO_Init(sFLASH_SPI_MISO_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure sFLASH_SPI pins: MOSI */ - GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MOSI_PIN; - GPIO_Init(sFLASH_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure sFLASH_CS_PIN pin: sFLASH Card CS pin */ - GPIO_InitStructure.GPIO_Pin = sFLASH_CS_PIN; - GPIO_Init(sFLASH_CS_GPIO_PORT, &GPIO_InitStructure); -} - -/** - * @brief Initializes the peripherals used by the SPI FLASH driver. - * @param None - * @retval None - */ -void sFLASH_LowLevel_Init(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /*!< sFLASH_SPI_CS_GPIO, sFLASH_SPI_MOSI_GPIO, sFLASH_SPI_MISO_GPIO - and sFLASH_SPI_SCK_GPIO Periph clock enable */ - RCC_APB2PeriphClockCmd(sFLASH_CS_GPIO_CLK | sFLASH_SPI_MOSI_GPIO_CLK | sFLASH_SPI_MISO_GPIO_CLK | - sFLASH_SPI_SCK_GPIO_CLK, ENABLE); - - /*!< sFLASH_SPI Periph clock enable */ - RCC_APB2PeriphClockCmd(sFLASH_SPI_CLK, ENABLE); - - /*!< Configure sFLASH_SPI pins: SCK */ - GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_SCK_PIN; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(sFLASH_SPI_SCK_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure sFLASH_SPI pins: MOSI */ - GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MOSI_PIN; - GPIO_Init(sFLASH_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure sFLASH_SPI pins: MISO */ - GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MISO_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(sFLASH_SPI_MISO_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure sFLASH_CS_PIN pin: sFLASH Card CS pin */ - GPIO_InitStructure.GPIO_Pin = sFLASH_CS_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(sFLASH_CS_GPIO_PORT, &GPIO_InitStructure); -} - -/** - * @brief DeInitializes the LM75_I2C. - * @param None - * @retval None - */ -void LM75_LowLevel_DeInit(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /*!< Disable LM75_I2C */ - I2C_Cmd(LM75_I2C, DISABLE); - /*!< DeInitializes the LM75_I2C */ - I2C_DeInit(LM75_I2C); - - /*!< LM75_I2C Periph clock disable */ - RCC_APB1PeriphClockCmd(LM75_I2C_CLK, DISABLE); - - /*!< Configure LM75_I2C pins: SCL */ - GPIO_InitStructure.GPIO_Pin = LM75_I2C_SCL_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(LM75_I2C_SCL_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure LM75_I2C pins: SDA */ - GPIO_InitStructure.GPIO_Pin = LM75_I2C_SDA_PIN; - GPIO_Init(LM75_I2C_SDA_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure LM75_I2C pin: SMBUS ALERT */ - GPIO_InitStructure.GPIO_Pin = LM75_I2C_SMBUSALERT_PIN; - GPIO_Init(LM75_I2C_SMBUSALERT_GPIO_PORT, &GPIO_InitStructure); -} - -/** - * @brief Initializes the LM75_I2C.. - * @param None - * @retval None - */ -void LM75_LowLevel_Init(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /*!< LM75_I2C Periph clock enable */ - RCC_APB1PeriphClockCmd(LM75_I2C_CLK, ENABLE); - - /*!< LM75_I2C_SCL_GPIO_CLK, LM75_I2C_SDA_GPIO_CLK - and LM75_I2C_SMBUSALERT_GPIO_CLK Periph clock enable */ - RCC_APB2PeriphClockCmd(LM75_I2C_SCL_GPIO_CLK | LM75_I2C_SDA_GPIO_CLK | - LM75_I2C_SMBUSALERT_GPIO_CLK, ENABLE); - - /*!< Configure LM75_I2C pins: SCL */ - GPIO_InitStructure.GPIO_Pin = LM75_I2C_SCL_PIN; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD; - GPIO_Init(LM75_I2C_SCL_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure LM75_I2C pins: SDA */ - GPIO_InitStructure.GPIO_Pin = LM75_I2C_SDA_PIN; - GPIO_Init(LM75_I2C_SDA_GPIO_PORT, &GPIO_InitStructure); - - /*!< Configure LM75_I2C pin: SMBUS ALERT */ - GPIO_InitStructure.GPIO_Pin = LM75_I2C_SMBUSALERT_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; - GPIO_Init(LM75_I2C_SMBUSALERT_GPIO_PORT, &GPIO_InitStructure); -} - -/** - * @} - */ - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |