o Moving tinyprintf and stm libraries under thirdparty.

1 files changed, 0 insertions, 750 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM32L152_EVAL/stm32l152_eval.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM32L152_EVAL/stm32l152_eval.c
deleted file mode 100644
index 0209e69..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM32L152_EVAL/stm32l152_eval.c
+++ /dev/null
@@ -1,750 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32l152_eval.c
-  * @author  MCD Application Team
-  * @version V4.5.0
-  * @date    07-March-2011
-  * @brief   This file provides:
-  *            - set of firmware functions to manage Leds, push-button and COM ports
-  *            - low level initialization functions for SD card (on SPI) and
-  *              temperature sensor (LM75) available on STM32L152-EVAL 
-  *              evaluation board RevB from STMicroelectronics.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************  
-  */ 
-  
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l152_eval.h"
-#include "stm32l1xx_spi.h"
-#include "stm32l1xx_i2c.h"
-
-/** @addtogroup Utilities
-  * @{
-  */ 
-
-/** @addtogroup STM32_EVAL
-  * @{
-  */ 
-
-/** @addtogroup STM32L152_EVAL
-  * @{
-  */   
-    
-/** @defgroup STM32L152_EVAL_LOW_LEVEL 
-  * @brief This file provides firmware functions to manage Leds, push-buttons, 
-  *        COM ports, SD card on SPI and temperature sensor (LM75) available on 
-  *        STM32L152-EVAL evaluation board from STMicroelectronics.
-  * @{
-  */ 
-
-/** @defgroup STM32L152_EVAL_LOW_LEVEL_Private_TypesDefinitions
-  * @{
-  */ 
-/**
-  * @}
-  */ 
-
-
-/** @defgroup STM32L152_EVAL_LOW_LEVEL_Private_Defines
-  * @{
-  */ 
-/**
-  * @}
-  */ 
-
-
-/** @defgroup STM32L152_EVAL_LOW_LEVEL_Private_Macros
-  * @{
-  */ 
-/**
-  * @}
-  */ 
-
-
-/** @defgroup STM32L152_EVAL_LOW_LEVEL_Private_Variables
-  * @{
-  */ 
-GPIO_TypeDef* GPIO_PORT[LEDn] = {LED1_GPIO_PORT, LED2_GPIO_PORT, LED3_GPIO_PORT,
-                                 LED4_GPIO_PORT};
-const uint16_t GPIO_PIN[LEDn] = {LED1_PIN, LED2_PIN, LED3_PIN,
-                                 LED4_PIN};
-const uint32_t GPIO_CLK[LEDn] = {LED1_GPIO_CLK, LED2_GPIO_CLK, LED3_GPIO_CLK,
-                                 LED4_GPIO_CLK};
-
-GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {KEY_BUTTON_GPIO_PORT, RIGHT_BUTTON_GPIO_PORT,
-                                      LEFT_BUTTON_GPIO_PORT, UP_BUTTON_GPIO_PORT,
-                                      DOWN_BUTTON_GPIO_PORT, SEL_BUTTON_GPIO_PORT}; 
-
-const uint16_t BUTTON_PIN[BUTTONn] = {KEY_BUTTON_PIN, RIGHT_BUTTON_PIN,
-                                      LEFT_BUTTON_PIN, UP_BUTTON_PIN,
-                                      DOWN_BUTTON_PIN, SEL_BUTTON_PIN}; 
-
-const uint32_t BUTTON_CLK[BUTTONn] = {KEY_BUTTON_GPIO_CLK, RIGHT_BUTTON_GPIO_CLK,
-                                      LEFT_BUTTON_GPIO_CLK, UP_BUTTON_GPIO_CLK,
-                                      DOWN_BUTTON_GPIO_CLK, SEL_BUTTON_GPIO_CLK};
-
-const uint16_t BUTTON_EXTI_LINE[BUTTONn] = {KEY_BUTTON_EXTI_LINE,
-                                            RIGHT_BUTTON_EXTI_LINE,
-                                            LEFT_BUTTON_EXTI_LINE,
-                                            UP_BUTTON_EXTI_LINE,
-                                            DOWN_BUTTON_EXTI_LINE,
-                                            SEL_BUTTON_EXTI_LINE};
-
-const uint16_t BUTTON_PORT_SOURCE[BUTTONn] = {KEY_BUTTON_EXTI_PORT_SOURCE,
-                                              RIGHT_BUTTON_EXTI_PORT_SOURCE,
-                                              LEFT_BUTTON_EXTI_PORT_SOURCE,
-                                              UP_BUTTON_EXTI_PORT_SOURCE,
-                                              DOWN_BUTTON_EXTI_PORT_SOURCE,
-                                              SEL_BUTTON_EXTI_PORT_SOURCE};
-								 
-const uint16_t BUTTON_PIN_SOURCE[BUTTONn] = {KEY_BUTTON_EXTI_PIN_SOURCE,
-                                             RIGHT_BUTTON_EXTI_PIN_SOURCE,
-                                             LEFT_BUTTON_EXTI_PIN_SOURCE,
-                                             UP_BUTTON_EXTI_PIN_SOURCE,
-                                             DOWN_BUTTON_EXTI_PIN_SOURCE,
-                                             SEL_BUTTON_EXTI_PIN_SOURCE}; 
-                                             
-const uint16_t BUTTON_IRQn[BUTTONn] = {KEY_BUTTON_EXTI_IRQn, RIGHT_BUTTON_EXTI_IRQn,
-                                       LEFT_BUTTON_EXTI_IRQn, UP_BUTTON_EXTI_IRQn,
-                                       DOWN_BUTTON_EXTI_IRQn, SEL_BUTTON_EXTI_IRQn};
-
-USART_TypeDef* COM_USART[COMn] = {EVAL_COM1, EVAL_COM2}; 
-
-GPIO_TypeDef* COM_TX_PORT[COMn] = {EVAL_COM1_TX_GPIO_PORT, EVAL_COM2_TX_GPIO_PORT};
- 
-GPIO_TypeDef* COM_RX_PORT[COMn] = {EVAL_COM1_RX_GPIO_PORT, EVAL_COM2_RX_GPIO_PORT};
-
-const uint32_t COM_USART_CLK[COMn] = {EVAL_COM1_CLK, EVAL_COM2_CLK};
-
-const uint32_t COM_TX_PORT_CLK[COMn] = {EVAL_COM1_TX_GPIO_CLK, EVAL_COM2_TX_GPIO_CLK};
- 
-const uint32_t COM_RX_PORT_CLK[COMn] = {EVAL_COM1_RX_GPIO_CLK, EVAL_COM2_RX_GPIO_CLK};
-
-const uint16_t COM_TX_PIN[COMn] = {EVAL_COM1_TX_PIN, EVAL_COM2_TX_PIN};
-
-const uint16_t COM_RX_PIN[COMn] = {EVAL_COM1_RX_PIN, EVAL_COM2_RX_PIN};
- 
-const uint16_t COM_TX_PIN_SOURCE[COMn] = {EVAL_COM1_TX_SOURCE, EVAL_COM2_TX_SOURCE};
-
-const uint16_t COM_RX_PIN_SOURCE[COMn] = {EVAL_COM1_RX_SOURCE, EVAL_COM2_RX_SOURCE};
- 
-const uint16_t COM_TX_AF[COMn] = {EVAL_COM1_TX_AF, EVAL_COM2_TX_AF};
- 
-const uint16_t COM_RX_AF[COMn] = {EVAL_COM1_RX_AF, EVAL_COM2_RX_AF};
-
-DMA_InitTypeDef   sEEDMA_InitStructure;
-
-/**
-  * @}
-  */ 
-
-
-/** @defgroup STM32L152_EVAL_LOW_LEVEL_Private_FunctionPrototypes
-  * @{
-  */ 
-
-/**
-  * @}
-  */ 
-
-/** @defgroup STM32L152_EVAL_LOW_LEVEL_Private_Functions
-  * @{
-  */ 
-
-/**
-  * @brief  Configures LED GPIO.
-  * @param  Led: Specifies the Led to be configured. 
-  *   This parameter can be one of following parameters:
-  *     @arg LED1
-  *     @arg LED2
-  *     @arg LED3
-  *     @arg LED4
-  * @retval None
-  */
-void STM_EVAL_LEDInit(Led_TypeDef Led)
-{
-  GPIO_InitTypeDef  GPIO_InitStructure;
-  
-  /* Enable the GPIO_LED Clock */
-  RCC_AHBPeriphClockCmd(GPIO_CLK[Led], ENABLE);
-
-  /* Configure the GPIO_LED pin */
-  GPIO_InitStructure.GPIO_Pin = GPIO_PIN[Led];
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
-  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
-  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz;
-  GPIO_Init(GPIO_PORT[Led], &GPIO_InitStructure);
-  GPIO_PORT[Led]->BSRRL = GPIO_PIN[Led];
-}
-
-/**
-  * @brief  Turns selected LED On.
-  * @param  Led: Specifies the Led to be set on. 
-  *   This parameter can be one of following parameters:
-  *     @arg LED1
-  *     @arg LED2
-  *     @arg LED3
-  *     @arg LED4  
-  * @retval None
-  */
-void STM_EVAL_LEDOn(Led_TypeDef Led)
-{
-  GPIO_PORT[Led]->BSRRH = GPIO_PIN[Led];
-}
-
-/**
-  * @brief  Turns selected LED Off.
-  * @param  Led: Specifies the Led to be set off. 
-  *   This parameter can be one of following parameters:
-  *     @arg LED1
-  *     @arg LED2
-  *     @arg LED3
-  *     @arg LED4 
-  * @retval None
-  */
-void STM_EVAL_LEDOff(Led_TypeDef Led)
-{
-  GPIO_PORT[Led]->BSRRL = GPIO_PIN[Led];  
-}
-
-/**
-  * @brief  Toggles the selected LED.
-  * @param  Led: Specifies the Led to be toggled. 
-  *   This parameter can be one of following parameters:
-  *     @arg LED1
-  *     @arg LED2
-  *     @arg LED3
-  *     @arg LED4  
-  * @retval None
-  */
-void STM_EVAL_LEDToggle(Led_TypeDef Led)
-{
-  GPIO_PORT[Led]->ODR ^= GPIO_PIN[Led];
-}
-
-/**
-  * @brief  Configures Button GPIO and EXTI Line.
-  * @param  Button: Specifies the Button to be configured.
-  *   This parameter can be one of following parameters:   
-  *     @arg BUTTON_KEY: Key Push Button 
-  *     @arg BUTTON_RIGHT: Joystick Right Push Button 
-  *     @arg BUTTON_LEFT: Joystick Left Push Button 
-  *     @arg BUTTON_UP: Joystick Up Push Button 
-  *     @arg BUTTON_DOWN: Joystick Down Push Button
-  *     @arg BUTTON_SEL: Joystick Sel Push Button
-  * @param  Button_Mode: Specifies Button mode.
-  *   This parameter can be one of following parameters:   
-  *     @arg BUTTON_MODE_GPIO: Button will be used as simple IO 
-  *     @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line with interrupt
-  *                     generation capability  
-  * @retval None
-  */
-void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode)
-{
-  GPIO_InitTypeDef GPIO_InitStructure;
-  EXTI_InitTypeDef EXTI_InitStructure;
-  NVIC_InitTypeDef NVIC_InitStructure;
-
-  /* There is no Wakeup and Tamper buttons on STM32L152-EVAL, the Button value should
-     be greater than 1. */
-  if(Button > 1)
-  {
-    Button = (Button_TypeDef) (Button - 2);
-    
-    /* Enable the BUTTON Clock */
-    RCC_AHBPeriphClockCmd(BUTTON_CLK[Button], ENABLE);
-    RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
-
-    /* Configure Button pin as input */
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
-    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
-    GPIO_InitStructure.GPIO_Pin = BUTTON_PIN[Button];
-    GPIO_Init(BUTTON_PORT[Button], &GPIO_InitStructure);
-
-
-    if (Button_Mode == BUTTON_MODE_EXTI)
-    {
-      /* Connect Button EXTI Line to Button GPIO Pin */
-      SYSCFG_EXTILineConfig(BUTTON_PORT_SOURCE[Button], BUTTON_PIN_SOURCE[Button]);
-
-      /* Configure Button EXTI line */
-      EXTI_InitStructure.EXTI_Line = BUTTON_EXTI_LINE[Button];
-      EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
-    
-      if(Button != BUTTON_KEY) 
-      {
-        EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;  
-      }
-      else
-      {
-        EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;  
-      }
-      EXTI_InitStructure.EXTI_LineCmd = ENABLE;
-      EXTI_Init(&EXTI_InitStructure);
-
-      /* Enable and set Button EXTI Interrupt to the lowest priority */
-      NVIC_InitStructure.NVIC_IRQChannel = BUTTON_IRQn[Button];
-      NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x0F;
-      NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x0F;
-      NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
-
-      NVIC_Init(&NVIC_InitStructure); 
-    }
-  }
-}
-
-/**
-  * @brief  Returns the selected Button state.
-  * @param  Button: Specifies the Button to be checked.
-  *   This parameter can be one of following parameters:    
-  *     @arg BUTTON_KEY: Key Push Button 
-  *     @arg BUTTON_RIGHT: Joystick Right Push Button 
-  *     @arg BUTTON_LEFT: Joystick Left Push Button 
-  *     @arg BUTTON_UP: Joystick Up Push Button 
-  *     @arg BUTTON_DOWN: Joystick Down Push Button
-  *     @arg BUTTON_SEL: Joystick Sel Push Button    
-  * @retval - When Button > 1, the Button GPIO pin value is returned.
-  *         - When Button = 0 or 1, error code (0xFF) is returned.   
-  */
-uint32_t STM_EVAL_PBGetState(Button_TypeDef Button)
-{
-  /* There is no Wakeup and Tamper pins on STM32L152-EVAL, the Button value should
-     be greater than 1. */
-  if(Button > 1)
-  {
-    Button = (Button_TypeDef) (Button - 2);
-    return GPIO_ReadInputDataBit(BUTTON_PORT[Button], BUTTON_PIN[Button]);
-  }
-  else
-  {
-    return 0xFF; /* Error Code */
-  }
-}
-
-/**
-  * @brief  Configures COM port.
-  * @param  COM: Specifies the COM port to be configured.
-  *   This parameter can be one of following parameters:    
-  *     @arg COM1
-  *     @arg COM2  
-  * @param  USART_InitStruct: pointer to a USART_InitTypeDef structure that
-  *   contains the configuration information for the specified USART peripheral.
-  * @retval None
-  */
-void STM_EVAL_COMInit(COM_TypeDef COM, USART_InitTypeDef* USART_InitStruct)
-{
-  GPIO_InitTypeDef GPIO_InitStructure;
-
-  /* Enable GPIO clock */
-  RCC_AHBPeriphClockCmd(COM_TX_PORT_CLK[COM] | COM_RX_PORT_CLK[COM], ENABLE);
-
-  /* Enable UART clock */
-  RCC_APB1PeriphClockCmd(COM_USART_CLK[COM], ENABLE);
-
-  /* Connect PXx to USARTx_Tx */
-  GPIO_PinAFConfig(COM_TX_PORT[COM], COM_TX_PIN_SOURCE[COM], COM_TX_AF[COM]);
-
-  /* Connect PXx to USARTx_Rx */
-  GPIO_PinAFConfig(COM_RX_PORT[COM], COM_RX_PIN_SOURCE[COM], COM_RX_AF[COM]);
-  
-  /* Configure USART Tx as alternate function push-pull */
-  GPIO_InitStructure.GPIO_Pin = COM_TX_PIN[COM];
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz;
-  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
-  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
-  GPIO_Init(COM_TX_PORT[COM], &GPIO_InitStructure);
-    
-  /* Configure USART Rx as alternate function push-pull */
-  GPIO_InitStructure.GPIO_Pin = COM_RX_PIN[COM];
-  GPIO_Init(COM_RX_PORT[COM], &GPIO_InitStructure);
-
-  /* USART configuration */
-  USART_Init(COM_USART[COM], USART_InitStruct);
-    
-  /* Enable USART */
-  USART_Cmd(COM_USART[COM], ENABLE);
-}
-
-/**
-  * @brief  DeInitializes the SPI interface.
-  * @param  None
-  * @retval None
-  */
-void SD_LowLevel_DeInit(void)
-{
-  GPIO_InitTypeDef  GPIO_InitStructure;
-  
-  SPI_Cmd(SD_SPI, DISABLE); /*!< SD_SPI disable */
-  SPI_DeInit(SD_SPI);   /*!< DeInitializes the SD_SPI */
-  
-  /*!< SD_SPI Periph clock disable */
-  RCC_APB1PeriphClockCmd(SD_SPI_CLK, DISABLE); 
-
-  /*!< Configure SD_SPI pins: SCK */
-  GPIO_InitStructure.GPIO_Pin = SD_SPI_SCK_PIN;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
-  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
-  GPIO_Init(SD_SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure SD_SPI pins: MISO */
-  GPIO_InitStructure.GPIO_Pin = SD_SPI_MISO_PIN;
-  GPIO_Init(SD_SPI_MISO_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure SD_SPI pins: MOSI */
-  GPIO_InitStructure.GPIO_Pin = SD_SPI_MOSI_PIN;
-  GPIO_Init(SD_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure SD_SPI_CS_PIN pin: SD Card CS pin */
-  GPIO_InitStructure.GPIO_Pin = SD_CS_PIN;
-  GPIO_Init(SD_CS_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure SD_SPI_DETECT_PIN pin: SD Card detect pin */
-  GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN;
-  GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStructure);
-}
-
-/**
-  * @brief  Initializes the SD Card and put it into StandBy State (Ready for 
-  *         data transfer).
-  * @param  None
-  * @retval None
-  */
-void SD_LowLevel_Init(void)
-{
-  GPIO_InitTypeDef  GPIO_InitStructure;
-  SPI_InitTypeDef   SPI_InitStructure;
-
-  /*!< SD_SPI_CS_GPIO, SD_SPI_MOSI_GPIO, SD_SPI_MISO_GPIO, SD_SPI_DETECT_GPIO 
-       and SD_SPI_SCK_GPIO Periph clock enable */
-  RCC_AHBPeriphClockCmd(SD_CS_GPIO_CLK | SD_SPI_MOSI_GPIO_CLK | SD_SPI_MISO_GPIO_CLK |
-                        SD_SPI_SCK_GPIO_CLK | SD_DETECT_GPIO_CLK, ENABLE);
-
-  /*!< SD_SPI Periph clock enable */
-  RCC_APB1PeriphClockCmd(SD_SPI_CLK, ENABLE); 
-
-  /*!< Configure SD_SPI pins: SCK */
-  GPIO_InitStructure.GPIO_Pin = SD_SPI_SCK_PIN;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz;
-  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
-  GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_UP;
-  GPIO_Init(SD_SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure SD_SPI pins: MISO */
-  GPIO_InitStructure.GPIO_Pin = SD_SPI_MISO_PIN;
-  GPIO_Init(SD_SPI_MISO_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure SD_SPI pins: MOSI */
-  GPIO_InitStructure.GPIO_Pin = SD_SPI_MOSI_PIN;
-  GPIO_Init(SD_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure SD_SPI_CS_PIN pin: SD Card CS pin */
-  GPIO_InitStructure.GPIO_Pin = SD_CS_PIN;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
-  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
-  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz;
-  GPIO_Init(SD_CS_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure SD_SPI_DETECT_PIN pin: SD Card detect pin */
-  GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
-  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
-  GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStructure);
-
-  /* Connect PXx to SD_SPI_SCK */
-  GPIO_PinAFConfig(SD_SPI_SCK_GPIO_PORT, SD_SPI_SCK_SOURCE, SD_SPI_SCK_AF);
-
-  /* Connect PXx to SD_SPI_MISO */
-  GPIO_PinAFConfig(SD_SPI_MISO_GPIO_PORT, SD_SPI_MISO_SOURCE, SD_SPI_MISO_AF); 
-
-  /* Connect PXx to SD_SPI_MOSI */
-  GPIO_PinAFConfig(SD_SPI_MOSI_GPIO_PORT, SD_SPI_MOSI_SOURCE, SD_SPI_MOSI_AF);  
-  
-  /*!< SD_SPI Config */
-  SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
-  SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
-  SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
-  SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
-  SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
-  SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
-  SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
-
-  SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
-  SPI_InitStructure.SPI_CRCPolynomial = 7;
-  SPI_Init(SD_SPI, &SPI_InitStructure);
-  
-  SPI_Cmd(SD_SPI, ENABLE); /*!< SD_SPI enable */
-}
-
-/**
-  * @brief  DeInitializes the LM75_I2C.
-  * @param  None
-  * @retval None
-  */
-void LM75_LowLevel_DeInit(void)
-{ 
-  GPIO_InitTypeDef  GPIO_InitStructure;
-
-  /*!< Disable LM75_I2C */
-  I2C_Cmd(LM75_I2C, DISABLE);
-  
-  /*!< DeInitializes the LM75_I2C */
-  I2C_DeInit(LM75_I2C);
-  
-  /*!< LM75_I2C Periph clock disable */
-  RCC_APB1PeriphClockCmd(LM75_I2C_CLK, DISABLE);
-    
-  /*!< Configure LM75_I2C pins: SCL */
-  GPIO_InitStructure.GPIO_Pin = LM75_I2C_SCL_PIN;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
-  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
-  GPIO_Init(LM75_I2C_SCL_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure LM75_I2C pins: SDA */
-  GPIO_InitStructure.GPIO_Pin = LM75_I2C_SDA_PIN;
-  GPIO_Init(LM75_I2C_SDA_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure LM75_I2C pin: SMBUS ALERT */
-  GPIO_InitStructure.GPIO_Pin = LM75_I2C_SMBUSALERT_PIN;
-  GPIO_Init(LM75_I2C_SMBUSALERT_GPIO_PORT, &GPIO_InitStructure);
-}
-
-/**
-  * @brief  Initializes the LM75_I2C.
-  * @param  None
-  * @retval None
-  */
-void LM75_LowLevel_Init(void)
-{ 
-  GPIO_InitTypeDef  GPIO_InitStructure;
-
-  /*!< LM75_I2C Periph clock enable */
-  RCC_APB1PeriphClockCmd(LM75_I2C_CLK, ENABLE);
-    
-  /*!< LM75_I2C_SCL_GPIO_CLK, LM75_I2C_SDA_GPIO_CLK 
-       and LM75_I2C_SMBUSALERT_GPIO_CLK Periph clock enable */
-  RCC_AHBPeriphClockCmd(LM75_I2C_SCL_GPIO_CLK | LM75_I2C_SDA_GPIO_CLK |
-                        LM75_I2C_SMBUSALERT_GPIO_CLK, ENABLE);
-  
-  /*!< Configure LM75_I2C pins: SCL */
-  GPIO_InitStructure.GPIO_Pin = LM75_I2C_SCL_PIN;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz;
-  GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
-  GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_NOPULL;
-  GPIO_Init(LM75_I2C_SCL_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure LM75_I2C pins: SDA */
-  GPIO_InitStructure.GPIO_Pin = LM75_I2C_SDA_PIN;
-  GPIO_Init(LM75_I2C_SDA_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure LM75_I2C pin: SMBUS ALERT */
-  GPIO_InitStructure.GPIO_Pin = LM75_I2C_SMBUSALERT_PIN;
-  GPIO_Init(LM75_I2C_SMBUSALERT_GPIO_PORT, &GPIO_InitStructure);
-
-
-  /* Connect PXx to I2C_SCL */
-  GPIO_PinAFConfig(LM75_I2C_SCL_GPIO_PORT, LM75_I2C_SCL_SOURCE, LM75_I2C_SCL_AF);
-
-  /* Connect PXx to I2C_SDA */
-  GPIO_PinAFConfig(LM75_I2C_SDA_GPIO_PORT, LM75_I2C_SDA_SOURCE, LM75_I2C_SDA_AF); 
-
-  /* Connect PXx to I2C_SMBUSALER */
-  GPIO_PinAFConfig(LM75_I2C_SMBUSALERT_GPIO_PORT, LM75_I2C_SMBUSALERT_SOURCE, LM75_I2C_SMBUSALERT_AF);     
-}
-
-/**
-  * @brief  DeInitializes peripherals used by the I2C EEPROM driver.
-  * @param  None
-  * @retval None
-  */
-void sEE_LowLevel_DeInit(void)
-{
-  GPIO_InitTypeDef  GPIO_InitStructure; 
-  NVIC_InitTypeDef NVIC_InitStructure;    
-     
-  /* sEE_I2C Peripheral Disable */
-  I2C_Cmd(sEE_I2C, DISABLE);
- 
-  /* sEE_I2C DeInit */
-  I2C_DeInit(sEE_I2C);
-
-  /*!< sEE_I2C Periph clock disable */
-  RCC_APB1PeriphClockCmd(sEE_I2C_CLK, DISABLE);
-    
-  /*!< GPIO configuration */  
-  /*!< Configure sEE_I2C pins: SCL */
-  GPIO_InitStructure.GPIO_Pin = sEE_I2C_SCL_PIN;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
-  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
-  GPIO_Init(sEE_I2C_SCL_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure sEE_I2C pins: SDA */
-  GPIO_InitStructure.GPIO_Pin = sEE_I2C_SDA_PIN;
-  GPIO_Init(sEE_I2C_SDA_GPIO_PORT, &GPIO_InitStructure);
-  
-  /* Configure and enable I2C DMA TX Channel interrupt */
-  NVIC_InitStructure.NVIC_IRQChannel = sEE_I2C_DMA_TX_IRQn;
-  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = sEE_I2C_DMA_PREPRIO;
-  NVIC_InitStructure.NVIC_IRQChannelSubPriority = sEE_I2C_DMA_SUBPRIO;
-  NVIC_InitStructure.NVIC_IRQChannelCmd = DISABLE;
-  NVIC_Init(&NVIC_InitStructure);
-
-  /* Configure and enable I2C DMA RX Channel interrupt */
-  NVIC_InitStructure.NVIC_IRQChannel = sEE_I2C_DMA_RX_IRQn;
-  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = sEE_I2C_DMA_PREPRIO;
-  NVIC_InitStructure.NVIC_IRQChannelSubPriority = sEE_I2C_DMA_SUBPRIO;
-  NVIC_Init(&NVIC_InitStructure);   
-  
-  /* Disable and Deinitialize the DMA channels */
-  DMA_Cmd(sEE_I2C_DMA_CHANNEL_TX, DISABLE);
-  DMA_Cmd(sEE_I2C_DMA_CHANNEL_RX, DISABLE);
-  DMA_DeInit(sEE_I2C_DMA_CHANNEL_TX);
-  DMA_DeInit(sEE_I2C_DMA_CHANNEL_RX);
-}
-
-/**
-  * @brief  Initializes peripherals used by the I2C EEPROM driver.
-  * @param  None
-  * @retval None
-  */
-void sEE_LowLevel_Init(void)
-{
-  GPIO_InitTypeDef  GPIO_InitStructure;
-  NVIC_InitTypeDef NVIC_InitStructure;  
-   
-  /*!< sEE_I2C Periph clock enable */
-  RCC_APB1PeriphClockCmd(sEE_I2C_CLK, ENABLE);
-  
-  /*!< sEE_I2C_SCL_GPIO_CLK and sEE_I2C_SDA_GPIO_CLK Periph clock enable */
-  RCC_AHBPeriphClockCmd(sEE_I2C_SCL_GPIO_CLK | sEE_I2C_SDA_GPIO_CLK, ENABLE);
-
-  RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
-  
-  /* Reset sEE_I2C peripheral */
-  RCC_APB1PeriphResetCmd(sEE_I2C_CLK, ENABLE);
-  
-  /* Release reset signal of sEE_I2C IP */
-  RCC_APB1PeriphResetCmd(sEE_I2C_CLK, DISABLE);
-    
-  /*!< GPIO configuration */  
-  /*!< Configure sEE_I2C pins: SCL */   
-  GPIO_InitStructure.GPIO_Pin = sEE_I2C_SCL_PIN;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz;
-  GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
-  GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_NOPULL;
-  GPIO_Init(sEE_I2C_SCL_GPIO_PORT, &GPIO_InitStructure);
-
-  /*!< Configure sEE_I2C pins: SDA */
-  GPIO_InitStructure.GPIO_Pin = sEE_I2C_SDA_PIN;
-  GPIO_Init(sEE_I2C_SDA_GPIO_PORT, &GPIO_InitStructure);
-
-  /* Connect PXx to I2C_SCL*/
-  GPIO_PinAFConfig(sEE_I2C_SCL_GPIO_PORT, sEE_I2C_SCL_SOURCE, sEE_I2C_SCL_AF);
-
-  /* Connect PXx to I2C_SDA*/
-  GPIO_PinAFConfig(sEE_I2C_SDA_GPIO_PORT, sEE_I2C_SDA_SOURCE, sEE_I2C_SDA_AF);  
-
-  /* Configure and enable I2C DMA TX Channel interrupt */
-  NVIC_InitStructure.NVIC_IRQChannel = sEE_I2C_DMA_TX_IRQn;
-  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = sEE_I2C_DMA_PREPRIO;
-  NVIC_InitStructure.NVIC_IRQChannelSubPriority = sEE_I2C_DMA_SUBPRIO;
-  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
-  NVIC_Init(&NVIC_InitStructure);
-
-  /* Configure and enable I2C DMA RX Channel interrupt */
-  NVIC_InitStructure.NVIC_IRQChannel = sEE_I2C_DMA_RX_IRQn;
-  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = sEE_I2C_DMA_PREPRIO;
-  NVIC_InitStructure.NVIC_IRQChannelSubPriority = sEE_I2C_DMA_SUBPRIO;
-  NVIC_Init(&NVIC_InitStructure);  
-  
-  /*!< I2C DMA TX and RX channels configuration */
-  /* Enable the DMA clock */
-  RCC_AHBPeriphClockCmd(sEE_I2C_DMA_CLK, ENABLE);
-
-  /* I2C TX DMA Channel configuration */
-  DMA_DeInit(sEE_I2C_DMA_CHANNEL_TX);
-  sEEDMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)sEE_I2C_DR_Address;
-  sEEDMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)0;   /* This parameter will be configured durig communication */
-  sEEDMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;    /* This parameter will be configured durig communication */
-  sEEDMA_InitStructure.DMA_BufferSize = 0xFFFF;            /* This parameter will be configured durig communication */
-  sEEDMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
-  sEEDMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
-  sEEDMA_InitStructure.DMA_PeripheralDataSize = DMA_MemoryDataSize_Byte;
-  sEEDMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
-  sEEDMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
-  sEEDMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
-  sEEDMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
-  DMA_Init(sEE_I2C_DMA_CHANNEL_TX, &sEEDMA_InitStructure);  
-  
-  /* I2C RX DMA Channel configuration */
-  DMA_DeInit(sEE_I2C_DMA_CHANNEL_RX);
-  DMA_Init(sEE_I2C_DMA_CHANNEL_RX, &sEEDMA_InitStructure);  
-  
-  /* Enable the DMA Channels Interrupts */
-  DMA_ITConfig(sEE_I2C_DMA_CHANNEL_TX, DMA_IT_TC, ENABLE);
-  DMA_ITConfig(sEE_I2C_DMA_CHANNEL_RX, DMA_IT_TC, ENABLE);    
-}
-
-/**
-  * @brief  Initializes DMA channel used by the I2C EEPROM driver.
-  * @param  None
-  * @retval None
-  */
-void sEE_LowLevel_DMAConfig(uint32_t pBuffer, uint32_t BufferSize, uint32_t Direction)
-{ 
-  /* Initialize the DMA with the new parameters */
-  if (Direction == sEE_DIRECTION_TX)
-  {
-    /* Configure the DMA Tx Channel with the buffer address and the buffer size */
-    sEEDMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)pBuffer;
-    sEEDMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;    
-    sEEDMA_InitStructure.DMA_BufferSize = (uint32_t)BufferSize;  
-    DMA_Init(sEE_I2C_DMA_CHANNEL_TX, &sEEDMA_InitStructure);  
-  }
-  else
-  { 
-    /* Configure the DMA Rx Channel with the buffer address and the buffer size */
-    sEEDMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)pBuffer;
-    sEEDMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
-    sEEDMA_InitStructure.DMA_BufferSize = (uint32_t)BufferSize;      
-    DMA_Init(sEE_I2C_DMA_CHANNEL_RX, &sEEDMA_InitStructure);    
-  }
-}
-
-/**
-  * @}
-  */ 
-
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */    
-
-/**
-  * @}
-  */ 
-    
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/