summaryrefslogtreecommitdiff
path: root/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c
diff options
context:
space:
mode:
Diffstat (limited to 'stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c')
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c252
1 files changed, 0 insertions, 252 deletions
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c
deleted file mode 100644
index 5f3002d..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_pcd_ex.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Extended PCD HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the USB Peripheral Controller:
- * + Extended features functions: Update FIFO configuration,
- * PMA configuration for EPs
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-#ifdef HAL_PCD_MODULE_ENABLED
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || \
- defined(STM32F103x6) || defined(STM32F103xB) || \
- defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
-
-
-/** @defgroup PCDEx PCDEx
- * @brief PCD Extended HAL module driver
- * @{
- */
-
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
- * @{
- */
-
-/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
- * @brief PCDEx control functions
- *
-@verbatim
- ===============================================================================
- ##### Extended Peripheral Control functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Update FIFO (USB_OTG_FS)
- (+) Update PMA configuration (USB)
-
-@endverbatim
- * @{
- */
-
-#if defined (USB_OTG_FS)
-/**
- * @brief Set Tx FIFO
- * @param hpcd: PCD handle
- * @param fifo: The number of Tx fifo
- * @param size: Fifo size
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
-{
- uint8_t index = 0;
- uint32_t Tx_Offset = 0;
-
- /* TXn min size = 16 words. (n : Transmit FIFO index)
- When a TxFIFO is not used, the Configuration should be as follows:
- case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
- --> Txm can use the space allocated for Txn.
- case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
- --> Txn should be configured with the minimum space of 16 words
- The FIFO is used optimally when used TxFIFOs are allocated in the top
- of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
- When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
-
- Tx_Offset = hpcd->Instance->GRXFSIZ;
-
- if(fifo == 0)
- {
- hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (size << 16) | Tx_Offset;
- }
- else
- {
- Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
- for (index = 0; index < (fifo - 1); index++)
- {
- Tx_Offset += (hpcd->Instance->DIEPTXF[index] >> 16);
- }
-
- /* Multiply Tx_Size by 2 to get higher performance */
- hpcd->Instance->DIEPTXF[fifo - 1] = (size << 16) | Tx_Offset;
-
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Set Rx FIFO
- * @param hpcd: PCD handle
- * @param size: Size of Rx fifo
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
-{
- hpcd->Instance->GRXFSIZ = size;
- return HAL_OK;
-}
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-/**
- * @brief Configure PMA for EP
- * @param hpcd : Device instance
- * @param ep_addr: endpoint address
- * @param ep_kind: endpoint Kind
- * USB_SNG_BUF: Single Buffer used
- * USB_DBL_BUF: Double Buffer used
- * @param pmaadress: EP address in The PMA: In case of single buffer endpoint
- * this parameter is 16-bit value providing the address
- * in PMA allocated to endpoint.
- * In case of double buffer endpoint this parameter
- * is a 32-bit value providing the endpoint buffer 0 address
- * in the LSB part of 32-bit value and endpoint buffer 1 address
- * in the MSB part of 32-bit value.
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
- uint16_t ep_addr,
- uint16_t ep_kind,
- uint32_t pmaadress)
-
-{
- PCD_EPTypeDef *ep = NULL;
-
- /* initialize ep structure*/
- if ((0x80 & ep_addr) == 0x80)
- {
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr];
- }
-
- /* Here we check if the endpoint is single or double Buffer*/
- if (ep_kind == PCD_SNG_BUF)
- {
- /*Single Buffer*/
- ep->doublebuffer = 0;
- /*Configure te PMA*/
- ep->pmaadress = (uint16_t)pmaadress;
- }
- else /*USB_DBL_BUF*/
- {
- /*Double Buffer Endpoint*/
- ep->doublebuffer = 1;
- /*Configure the PMA*/
- ep->pmaaddr0 = pmaadress & 0xFFFF;
- ep->pmaaddr1 = (pmaadress & 0xFFFF0000) >> 16;
- }
-
- return HAL_OK;
-}
-#endif /* USB */
-/**
- * @}
- */
-
-/** @defgroup PCDEx_Exported_Functions_Group2 Peripheral State functions
- * @brief Manage device connection state
- * @{
- */
-/**
- * @brief Software Device Connection,
- * this function is not required by USB OTG FS peripheral, it is used
- * only by USB Device FS peripheral.
- * @param hpcd: PCD handle
- * @param state: connection state (0 : disconnected / 1: connected)
- * @retval None
- */
-__weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- UNUSED(state);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCDEx_SetConnectionState could be implemented in the user file
- */
-}
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F102x6 || STM32F102xB || */
- /* STM32F103x6 || STM32F103xB || */
- /* STM32F103xE || STM32F103xG || */
- /* STM32F105xC || STM32F107xC */
-
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-01 09:26:39 +0000