summaryrefslogtreecommitdiff
path: root/tcl
Commit message (Collapse)AuthorAgeFilesLines
* Reduced sleep time after reset mlu2009-09-191-1/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2732 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Move Cortex A8 debug access initialisation from omap3530.cfg to cortex_a8.cmlu2009-09-181-18/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2728 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Rolf Meeser <rolfm_9dq@yahoo.de> adds flash support for NXP's LPC2900 family ↵oharboe2009-09-162-0/+170
| | | | | | (ARM968E). git-svn-id: svn://svn.berlios.de/openocd/trunk@2715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Magnus Lundin <lundin@mlu.mine.nu> Disable poll while core register ↵oharboe2009-09-131-0/+2
| | | | | | initialization git-svn-id: svn://svn.berlios.de/openocd/trunk@2703 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> oharboe2009-09-123-4/+96
| | | | | | | | | | | | | | Update the board config for the DaVinci DM355 EVM so the reset-init event handler does the rest of the work it should do: - minor PLL setup bugfixes - initialize the DDR2 controller - probe both NAND banks - initialize UART0 - enable the icache git-svn-id: svn://svn.berlios.de/openocd/trunk@2699 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* tap post reset event added. Allows omap3530 to send 100 runtest idle ↵oharboe2009-09-111-0/+2
| | | | | | tickle's after a TAP_RESET. git-svn-id: svn://svn.berlios.de/openocd/trunk@2696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - revert change made to sheevaplug.cfg in rev2573ntfreak2009-09-111-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2695 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* syntax error fixoharboe2009-09-111-0/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2689 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* michal smulski <michal.smulski@ooma.com> telo target/board scriptsoharboe2009-09-105-30/+1396
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2683 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* use "armv4_5 core_state arm" instead of soft_reset_halt, fewer side effectsoharboe2009-09-043-4/+5
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2672 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Dirk Behme <dirk.behme@googlemail.com> retire jtag_speed usageoharboe2009-09-041-2/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2671 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Dirk Behme <dirk.behme@googlemail.com> Add default fall back freqency.oharboe2009-09-041-0/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2670 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* set ARM mode using explicit command rather than soft_reset_halt which has ↵oharboe2009-09-041-1/+1
| | | | | | lots of side effects. git-svn-id: svn://svn.berlios.de/openocd/trunk@2669 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> "set _TARGETNAME ..." cleanupoharboe2009-09-0445-49/+54
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2665 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Claffey <dnclaffey@gmail.com> get rid of reset recursionoharboe2009-09-041-3/+4
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2664 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Claffey <dnclaffey@gmail.com> tested with the Atheros reference design ↵oharboe2009-09-021-0/+56
| | | | | | "PB44" git-svn-id: svn://svn.berlios.de/openocd/trunk@2662 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Crusty Code fixes from the tcl directory re-arragementsduane2009-09-023-22/+22
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2661 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Gary Carlson <gcarlson@carlson-minot.com> config fileoharboe2009-08-311-0/+204
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2657 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Ferdinand Postema <ferdinand@postema.eu> config script for the MMnet1001 ↵oharboe2009-08-311-0/+83
| | | | | | module from Propox. git-svn-id: svn://svn.berlios.de/openocd/trunk@2656 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have ↵oharboe2009-08-284-6/+0
| | | | | | | | | | | TRST signals, so defining ntrst_delay is pointless; don't. At least the LM3S3748 eval board doesn't need nsrst_delay either; remove that too. git-svn-id: svn://svn.berlios.de/openocd/trunk@2645 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Ferdinand Postema <ferdinand@postema.eu> increase reset delay to fix ↵oharboe2009-08-251-1/+1
| | | | | | regression from 2600 to 2604 git-svn-id: svn://svn.berlios.de/openocd/trunk@2614 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Brian Findlay <findlaybrian@gmail.com> finalize mini2440.cfgoharboe2009-08-251-3/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2611 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* use cortex_a8 instead of cortex_m3oharboe2009-08-251-3/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2610 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Pieter Conradie <Pieter.Conradie@psitek.com> shuffle things around to the ↵oharboe2009-08-214-129/+5
| | | | | | right spots. Should have been done in previous commit. git-svn-id: svn://svn.berlios.de/openocd/trunk@2604 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* native line endingsoharboe2009-08-215-284/+284
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2603 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Pieter Conradie <Pieter.Conradie@psitek.com> Scripts for Atmel AT91SAM7S256 ↵oharboe2009-08-215-0/+284
| | | | | | and AT91SAM9260 git-svn-id: svn://svn.berlios.de/openocd/trunk@2602 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Brian Findlay <findlaybrian@gmail.com> Board support for mini2440 ↵oharboe2009-08-181-0/+321
| | | | | | (friendlyARM) samsung s3c2440 based board git-svn-id: svn://svn.berlios.de/openocd/trunk@2593 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add cfg file for Amontec JTAGKey2 jtag interfacentfreak2009-08-181-0/+11
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2592 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Cleanup the Stellaris target configs:oharboe2009-08-185-59/+21
| | | | | | | | | | | | | | | | - remove endianness options; these chips hard-wire "little" - $_TARGETNAME updates: * don't pass $_TARGETNAME where a TAP label is required * flash config uses $_TARGETNAME (it might not be target #0) * simplify one $_TARGETNAME construction - update work area setup: * remove VM spec; these chips have no VM! * fix some wrong sizes (0x4000 == 16K, not 4K) * simplify: take defaults - comment fixups git-svn-id: svn://svn.berlios.de/openocd/trunk@2589 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Xiaofan Chen <xiaofanc@gmail.com> Split LM3S811 config file into target file ↵oharboe2009-08-162-12/+21
| | | | | | and board file git-svn-id: svn://svn.berlios.de/openocd/trunk@2584 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* michal smulski <michal.smulski@ooma.com> arm11 target config filesoharboe2009-08-162-0/+74
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2583 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Xiaofan Chen <xiaofanc@gmail.com> Add config file for TI-Luminary LM3S1968 ↵oharboe2009-08-162-0/+58
| | | | | | chip and EK-LM3S1968 board git-svn-id: svn://svn.berlios.de/openocd/trunk@2582 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Audrius Urmanavičius [didele.deze@gmail.com]:ntfreak2009-08-132-0/+57
| | | | | | | Add flash programming support for NXP LPC1700 cortex_m3 based family git-svn-id: svn://svn.berlios.de/openocd/trunk@2579 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Bring all the ftdi names inline in the cfg scripts. scripts will now work ↵ntfreak2009-08-0618-18/+18
| | | | | | for either ftd2xx or libftdi drivers. git-svn-id: svn://svn.berlios.de/openocd/trunk@2573 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Jonathan Cameron <jic23@cam.ac.uk> fix regression from 1836 when the ↵oharboe2009-07-221-0/+2
| | | | | | reset_config command was removed from pxa270.cfg git-svn-id: svn://svn.berlios.de/openocd/trunk@2557 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Stefano Voulaz <s.voulaz@projecktstudio.com> first cut samsung_s3c2450 oharboe2009-07-221-0/+49
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2556 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Peter Denison <openwrt@marshadder.org> workaround for broken USBprog w/short ↵oharboe2009-07-121-1/+3
| | | | | | tms sequences git-svn-id: svn://svn.berlios.de/openocd/trunk@2509 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> split EK board support outoharboe2009-07-102-24/+28
| | | | | | from the target CPU support . git-svn-id: svn://svn.berlios.de/openocd/trunk@2504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* sharpen reset_config for imx27 - use both trst & srst. srst pulls trst.oharboe2009-07-082-1/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2493 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* srst pulls trst according to Freescale docs for i.mx27oharboe2009-07-071-2/+7
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2492 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Update docs to say that "arm7_9 dbgrq ↵oharboe2009-07-063-3/+0
| | | | | | | | | enable" is the default on ARM9 cores, and update the DaVinci config files so they no longer explicitly specify it. git-svn-id: svn://svn.berlios.de/openocd/trunk@2484 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* bitrot: fix numerous syntax errors oharboe2009-07-061-8/+6
| | | | | | added correct jtag device id git-svn-id: svn://svn.berlios.de/openocd/trunk@2467 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Xiaofan Chen <xiaofanc@gmail.com> With this patch, OpenOCD can talk to myoharboe2009-07-021-2/+2
| | | | | | Analog Device Eval-ADuC7060 eval board. git-svn-id: svn://svn.berlios.de/openocd/trunk@2459 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove vim editor commands from TCL files.zwelch2009-07-025-10/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2455 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-07-022-13/+10
| | | | | | | | | | | | | | | | Prepare the DaVinci PLL code to support the version 0x0E module used in newer chips (e.g. dm365): rename the original code so it's specific to version 0x02 PLL modules, and update the dm355evm code to use that new name. Fix two minor bugs in that version 2 code: sysclk3 setup used the sysclk2 divider address (affecting video processing on dm355, no worry for now) and sysclk2 setup had a syntax error. Also minor fixups to dm355evm, mostly to permit use of RTCK. git-svn-id: svn://svn.berlios.de/openocd/trunk@2447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add stm32 connectivity line tapid to stm32.cfgntfreak2009-07-011-1/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2440 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add svn:eol-style native property to TCL files that are missing it.zwelch2009-06-302-31/+31
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2433 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove executable bits from at91sam3 configuration files.zwelch2009-06-308-0/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2432 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* freddie_chopin@op.pl fix handling of workareaoharboe2009-06-302-10/+6
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2431 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Marcel Jost <marcel.jost@bfh.ch>:zwelch2009-06-303-0/+69
| | | | | | | | | | This patch adds support for the Luminary Micro LM3S9B90 target and LM3S9B92 Evaluation Kit. These kits include a new ft2232 adapter, the Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a new ft2232 layout called "luminary_icdi". git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-27 19:08:06 +0000