diff options
| author | Trygve Laugstøl <trygvis@inamo.no> | 2017-01-25 22:24:18 +0100 |
|---|---|---|
| committer | Trygve Laugstøl <trygvis@inamo.no> | 2017-01-25 22:29:25 +0100 |
| commit | 40e04e3772726829d66c12e69f24b03920d79c67 (patch) | |
| tree | 636811bad956798c9d5d22de9e7ba8c799b8d791 /tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries | |
| parent | 2fff65aed2477a503c72629d27e2a330d30c02d1 (diff) | |
| download | stm32f103-playground-40e04e3772726829d66c12e69f24b03920d79c67.tar.gz stm32f103-playground-40e04e3772726829d66c12e69f24b03920d79c67.tar.bz2 stm32f103-playground-40e04e3772726829d66c12e69f24b03920d79c67.tar.xz stm32f103-playground-40e04e3772726829d66c12e69f24b03920d79c67.zip | |
o Moving tinyprintf and stm libraries under thirdparty.
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries')
61 files changed, 0 insertions, 41710 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.h deleted file mode 100644 index 7ab7b4b..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.h +++ /dev/null @@ -1,1818 +0,0 @@ -/**************************************************************************//** - * @file core_cm3.h - * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File - * @version V1.30 - * @date 30. October 2009 - * - * @note - * Copyright (C) 2009 ARM Limited. All rights reserved. - * - * @par - * ARM Limited (ARM) is supplying this software for use with Cortex-M - * processor based microcontrollers. This file can be freely distributed - * within development tools that are supporting such ARM based processors. - * - * @par - * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED - * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. - * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR - * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. - * - ******************************************************************************/ - -#ifndef __CM3_CORE_H__ -#define __CM3_CORE_H__ - -/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration - * - * List of Lint messages which will be suppressed and not shown: - * - Error 10: \n - * register uint32_t __regBasePri __asm("basepri"); \n - * Error 10: Expecting ';' - * . - * - Error 530: \n - * return(__regBasePri); \n - * Warning 530: Symbol '__regBasePri' (line 264) not initialized - * . - * - Error 550: \n - * __regBasePri = (basePri & 0x1ff); \n - * Warning 550: Symbol '__regBasePri' (line 271) not accessed - * . - * - Error 754: \n - * uint32_t RESERVED0[24]; \n - * Info 754: local structure member '<some, not used in the HAL>' (line 109, file ./cm3_core.h) not referenced - * . - * - Error 750: \n - * #define __CM3_CORE_H__ \n - * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced - * . - * - Error 528: \n - * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n - * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced - * . - * - Error 751: \n - * } InterruptType_Type; \n - * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced - * . - * Note: To re-enable a Message, insert a space before 'lint' * - * - */ - -/*lint -save */ -/*lint -e10 */ -/*lint -e530 */ -/*lint -e550 */ -/*lint -e754 */ -/*lint -e750 */ -/*lint -e528 */ -/*lint -e751 */ - - -/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions - This file defines all structures and symbols for CMSIS core: - - CMSIS version number - - Cortex-M core registers and bitfields - - Cortex-M core peripheral base address - @{ - */ - -#ifdef __cplusplus - extern "C" { -#endif - -#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */ -#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */ -#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ - -#define __CORTEX_M (0x03) /*!< Cortex core */ - -#include <stdint.h> /* Include standard types */ - -#if defined (__ICCARM__) - #include <intrinsics.h> /* IAR Intrinsics */ -#endif - - -#ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */ -#endif - - - - -/** - * IO definitions - * - * define access restrictions to peripheral registers - */ - -#ifdef __cplusplus - #define __I volatile /*!< defines 'read only' permissions */ -#else - #define __I volatile const /*!< defines 'read only' permissions */ -#endif -#define __O volatile /*!< defines 'write only' permissions */ -#define __IO volatile /*!< defines 'read / write' permissions */ - - - -/******************************************************************************* - * Register Abstraction - ******************************************************************************/ -/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register - @{ -*/ - - -/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC - memory mapped structure for Nested Vectored Interrupt Controller (NVIC) - @{ - */ -typedef struct -{ - __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */ - uint32_t RESERVED0[24]; - __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */ - uint32_t RSERVED1[24]; - __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */ - uint32_t RESERVED2[24]; - __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */ - uint32_t RESERVED3[24]; - __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */ - uint32_t RESERVED4[56]; - __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644]; - __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */ -} NVIC_Type; -/*@}*/ /* end of group CMSIS_CM3_NVIC */ - - -/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB - memory mapped structure for System Control Block (SCB) - @{ - */ -typedef struct -{ - __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */ - __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */ - __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */ - __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */ - __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */ - __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */ - __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */ - __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */ - __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */ - __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */ - __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */ - __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */ - __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */ - __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */ - __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */ - __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */ - __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */ - __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ -#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ - -#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Registers Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* SCB Hard Fault Status Registers Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ -/*@}*/ /* end of group CMSIS_CM3_SCB */ - - -/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick - memory mapped structure for SysTick - @{ - */ -typedef struct -{ - __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */ - __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */ - __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */ - __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ -/*@}*/ /* end of group CMSIS_CM3_SysTick */ - - -/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM - memory mapped structure for Instrumentation Trace Macrocell (ITM) - @{ - */ -typedef struct -{ - __O union - { - __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */ - __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */ - __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */ - } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */ - uint32_t RESERVED0[864]; - __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */ - uint32_t RESERVED1[15]; - __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */ - uint32_t RESERVED2[15]; - __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */ - uint32_t RESERVED3[29]; - __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */ - __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */ - __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */ - uint32_t RESERVED4[43]; - __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */ - __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */ - uint32_t RESERVED5[6]; - __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */ - __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */ - __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */ - __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */ - __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */ - __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */ - __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */ - __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */ - __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */ - __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */ - __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */ - __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ -/*@}*/ /* end of group CMSIS_CM3_ITM */ - - -/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type - memory mapped structure for Interrupt Type - @{ - */ -typedef struct -{ - uint32_t RESERVED0; - __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */ -#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) - __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */ -#else - uint32_t RESERVED1; -#endif -} InterruptType_Type; - -/* Interrupt Controller Type Register Definitions */ -#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */ -#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */ - -/* Auxiliary Control Register Definitions */ -#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */ -#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */ - -#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */ -#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */ - -#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */ -#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */ -/*@}*/ /* end of group CMSIS_CM3_InterruptType */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) -/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU - memory mapped structure for Memory Protection Unit (MPU) - @{ - */ -typedef struct -{ - __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */ - __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */ - __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */ - __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */ - __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */ - __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */ - __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */ - __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */ - __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */ - __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */ - __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register */ -#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register */ -#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register */ -#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register */ -#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register */ -#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */ -#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */ - -#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */ -#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */ - -#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */ -#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */ - -#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */ -#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */ - -#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */ -#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */ - -#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */ -#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */ - -#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@}*/ /* end of group CMSIS_CM3_MPU */ -#endif - - -/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug - memory mapped structure for Core Debug Register - @{ - */ -typedef struct -{ - __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */ - __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */ - __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */ - __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register */ -#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register */ -#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ -/*@}*/ /* end of group CMSIS_CM3_CoreDebug */ - - -/* Memory mapping of Cortex-M3 Hardware */ -#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000) /*!< ITM Base Address */ -#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */ - -#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */ -#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) - #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */ -#endif - -/*@}*/ /* end of group CMSIS_CM3_core_register */ - - -/******************************************************************************* - * Hardware Abstraction Layer - ******************************************************************************/ - -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ - -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - -#endif - - -/* ################### Compiler specific Intrinsics ########################### */ - -#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ -/* ARM armcc specific functions */ - -#define __enable_fault_irq __enable_fiq -#define __disable_fault_irq __disable_fiq - -#define __NOP __nop -#define __WFI __wfi -#define __WFE __wfe -#define __SEV __sev -#define __ISB() __isb(0) -#define __DSB() __dsb(0) -#define __DMB() __dmb(0) -#define __REV __rev -#define __RBIT __rbit -#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr)) -#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr)) -#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr)) -#define __STREXB(value, ptr) __strex(value, ptr) -#define __STREXH(value, ptr) __strex(value, ptr) -#define __STREXW(value, ptr) __strex(value, ptr) - - -/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */ -/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */ -/* intrinsic void __enable_irq(); */ -/* intrinsic void __disable_irq(); */ - - -/** - * @brief Return the Process Stack Pointer - * - * @return ProcessStackPointer - * - * Return the actual process stack pointer - */ -extern uint32_t __get_PSP(void); - -/** - * @brief Set the Process Stack Pointer - * - * @param topOfProcStack Process Stack Pointer - * - * Assign the value ProcessStackPointer to the MSP - * (process stack pointer) Cortex processor register - */ -extern void __set_PSP(uint32_t topOfProcStack); - -/** - * @brief Return the Main Stack Pointer - * - * @return Main Stack Pointer - * - * Return the current value of the MSP (main stack pointer) - * Cortex processor register - */ -extern uint32_t __get_MSP(void); - -/** - * @brief Set the Main Stack Pointer - * - * @param topOfMainStack Main Stack Pointer - * - * Assign the value mainStackPointer to the MSP - * (main stack pointer) Cortex processor register - */ -extern void __set_MSP(uint32_t topOfMainStack); - -/** - * @brief Reverse byte order in unsigned short value - * - * @param value value to reverse - * @return reversed value - * - * Reverse byte order in unsigned short value - */ -extern uint32_t __REV16(uint16_t value); - -/** - * @brief Reverse byte order in signed short value with sign extension to integer - * - * @param value value to reverse - * @return reversed value - * - * Reverse byte order in signed short value with sign extension to integer - */ -extern int32_t __REVSH(int16_t value); - - -#if (__ARMCC_VERSION < 400000) - -/** - * @brief Remove the exclusive lock created by ldrex - * - * Removes the exclusive lock which is created by ldrex. - */ -extern void __CLREX(void); - -/** - * @brief Return the Base Priority value - * - * @return BasePriority - * - * Return the content of the base priority register - */ -extern uint32_t __get_BASEPRI(void); - -/** - * @brief Set the Base Priority value - * - * @param basePri BasePriority - * - * Set the base priority register - */ -extern void __set_BASEPRI(uint32_t basePri); - -/** - * @brief Return the Priority Mask value - * - * @return PriMask - * - * Return state of the priority mask bit from the priority mask register - */ -extern uint32_t __get_PRIMASK(void); - -/** - * @brief Set the Priority Mask value - * - * @param priMask PriMask - * - * Set the priority mask bit in the priority mask register - */ -extern void __set_PRIMASK(uint32_t priMask); - -/** - * @brief Return the Fault Mask value - * - * @return FaultMask - * - * Return the content of the fault mask register - */ -extern uint32_t __get_FAULTMASK(void); - -/** - * @brief Set the Fault Mask value - * - * @param faultMask faultMask value - * - * Set the fault mask register - */ -extern void __set_FAULTMASK(uint32_t faultMask); - -/** - * @brief Return the Control Register value - * - * @return Control value - * - * Return the content of the control register - */ -extern uint32_t __get_CONTROL(void); - -/** - * @brief Set the Control Register value - * - * @param control Control value - * - * Set the control register - */ -extern void __set_CONTROL(uint32_t control); - -#else /* (__ARMCC_VERSION >= 400000) */ - -/** - * @brief Remove the exclusive lock created by ldrex - * - * Removes the exclusive lock which is created by ldrex. - */ -#define __CLREX __clrex - -/** - * @brief Return the Base Priority value - * - * @return BasePriority - * - * Return the content of the base priority register - */ -static __INLINE uint32_t __get_BASEPRI(void) -{ - register uint32_t __regBasePri __ASM("basepri"); - return(__regBasePri); -} - -/** - * @brief Set the Base Priority value - * - * @param basePri BasePriority - * - * Set the base priority register - */ -static __INLINE void __set_BASEPRI(uint32_t basePri) -{ - register uint32_t __regBasePri __ASM("basepri"); - __regBasePri = (basePri & 0xff); -} - -/** - * @brief Return the Priority Mask value - * - * @return PriMask - * - * Return state of the priority mask bit from the priority mask register - */ -static __INLINE uint32_t __get_PRIMASK(void) -{ - register uint32_t __regPriMask __ASM("primask"); - return(__regPriMask); -} - -/** - * @brief Set the Priority Mask value - * - * @param priMask PriMask - * - * Set the priority mask bit in the priority mask register - */ -static __INLINE void __set_PRIMASK(uint32_t priMask) -{ - register uint32_t __regPriMask __ASM("primask"); - __regPriMask = (priMask); -} - -/** - * @brief Return the Fault Mask value - * - * @return FaultMask - * - * Return the content of the fault mask register - */ -static __INLINE uint32_t __get_FAULTMASK(void) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - return(__regFaultMask); -} - -/** - * @brief Set the Fault Mask value - * - * @param faultMask faultMask value - * - * Set the fault mask register - */ -static __INLINE void __set_FAULTMASK(uint32_t faultMask) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - __regFaultMask = (faultMask & 1); -} - -/** - * @brief Return the Control Register value - * - * @return Control value - * - * Return the content of the control register - */ -static __INLINE uint32_t __get_CONTROL(void) -{ - register uint32_t __regControl __ASM("control"); - return(__regControl); -} - -/** - * @brief Set the Control Register value - * - * @param control Control value - * - * Set the control register - */ -static __INLINE void __set_CONTROL(uint32_t control) -{ - register uint32_t __regControl __ASM("control"); - __regControl = control; -} - -#endif /* __ARMCC_VERSION */ - - - -#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ -/* IAR iccarm specific functions */ - -#define __enable_irq __enable_interrupt /*!< global Interrupt enable */ -#define __disable_irq __disable_interrupt /*!< global Interrupt disable */ - -static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); } -static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); } - -#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */ -static __INLINE void __WFI() { __ASM ("wfi"); } -static __INLINE void __WFE() { __ASM ("wfe"); } -static __INLINE void __SEV() { __ASM ("sev"); } -static __INLINE void __CLREX() { __ASM ("clrex"); } - -/* intrinsic void __ISB(void) */ -/* intrinsic void __DSB(void) */ -/* intrinsic void __DMB(void) */ -/* intrinsic void __set_PRIMASK(); */ -/* intrinsic void __get_PRIMASK(); */ -/* intrinsic void __set_FAULTMASK(); */ -/* intrinsic void __get_FAULTMASK(); */ -/* intrinsic uint32_t __REV(uint32_t value); */ -/* intrinsic uint32_t __REVSH(uint32_t value); */ -/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */ -/* intrinsic unsigned long __LDREX(unsigned long *); */ - - -/** - * @brief Return the Process Stack Pointer - * - * @return ProcessStackPointer - * - * Return the actual process stack pointer - */ -extern uint32_t __get_PSP(void); - -/** - * @brief Set the Process Stack Pointer - * - * @param topOfProcStack Process Stack Pointer - * - * Assign the value ProcessStackPointer to the MSP - * (process stack pointer) Cortex processor register - */ -extern void __set_PSP(uint32_t topOfProcStack); - -/** - * @brief Return the Main Stack Pointer - * - * @return Main Stack Pointer - * - * Return the current value of the MSP (main stack pointer) - * Cortex processor register - */ -extern uint32_t __get_MSP(void); - -/** - * @brief Set the Main Stack Pointer - * - * @param topOfMainStack Main Stack Pointer - * - * Assign the value mainStackPointer to the MSP - * (main stack pointer) Cortex processor register - */ -extern void __set_MSP(uint32_t topOfMainStack); - -/** - * @brief Reverse byte order in unsigned short value - * - * @param value value to reverse - * @return reversed value - * - * Reverse byte order in unsigned short value - */ -extern uint32_t __REV16(uint16_t value); - -/** - * @brief Reverse bit order of value - * - * @param value value to reverse - * @return reversed value - * - * Reverse bit order of value - */ -extern uint32_t __RBIT(uint32_t value); - -/** - * @brief LDR Exclusive (8 bit) - * - * @param *addr address pointer - * @return value of (*address) - * - * Exclusive LDR command for 8 bit values) - */ -extern uint8_t __LDREXB(uint8_t *addr); - -/** - * @brief LDR Exclusive (16 bit) - * - * @param *addr address pointer - * @return value of (*address) - * - * Exclusive LDR command for 16 bit values - */ -extern uint16_t __LDREXH(uint16_t *addr); - -/** - * @brief LDR Exclusive (32 bit) - * - * @param *addr address pointer - * @return value of (*address) - * - * Exclusive LDR command for 32 bit values - */ -extern uint32_t __LDREXW(uint32_t *addr); - -/** - * @brief STR Exclusive (8 bit) - * - * @param value value to store - * @param *addr address pointer - * @return successful / failed - * - * Exclusive STR command for 8 bit values - */ -extern uint32_t __STREXB(uint8_t value, uint8_t *addr); - -/** - * @brief STR Exclusive (16 bit) - * - * @param value value to store - * @param *addr address pointer - * @return successful / failed - * - * Exclusive STR command for 16 bit values - */ -extern uint32_t __STREXH(uint16_t value, uint16_t *addr); - -/** - * @brief STR Exclusive (32 bit) - * - * @param value value to store - * @param *addr address pointer - * @return successful / failed - * - * Exclusive STR command for 32 bit values - */ -extern uint32_t __STREXW(uint32_t value, uint32_t *addr); - - - -#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ -/* GNU gcc specific functions */ - -static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); } -static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); } - -static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); } -static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); } - -static __INLINE void __NOP() { __ASM volatile ("nop"); } -static __INLINE void __WFI() { __ASM volatile ("wfi"); } -static __INLINE void __WFE() { __ASM volatile ("wfe"); } -static __INLINE void __SEV() { __ASM volatile ("sev"); } -static __INLINE void __ISB() { __ASM volatile ("isb"); } -static __INLINE void __DSB() { __ASM volatile ("dsb"); } -static __INLINE void __DMB() { __ASM volatile ("dmb"); } -static __INLINE void __CLREX() { __ASM volatile ("clrex"); } - - -/** - * @brief Return the Process Stack Pointer - * - * @return ProcessStackPointer - * - * Return the actual process stack pointer - */ -extern uint32_t __get_PSP(void); - -/** - * @brief Set the Process Stack Pointer - * - * @param topOfProcStack Process Stack Pointer - * - * Assign the value ProcessStackPointer to the MSP - * (process stack pointer) Cortex processor register - */ -extern void __set_PSP(uint32_t topOfProcStack); - -/** - * @brief Return the Main Stack Pointer - * - * @return Main Stack Pointer - * - * Return the current value of the MSP (main stack pointer) - * Cortex processor register - */ -extern uint32_t __get_MSP(void); - -/** - * @brief Set the Main Stack Pointer - * - * @param topOfMainStack Main Stack Pointer - * - * Assign the value mainStackPointer to the MSP - * (main stack pointer) Cortex processor register - */ -extern void __set_MSP(uint32_t topOfMainStack); - -/** - * @brief Return the Base Priority value - * - * @return BasePriority - * - * Return the content of the base priority register - */ -extern uint32_t __get_BASEPRI(void); - -/** - * @brief Set the Base Priority value - * - * @param basePri BasePriority - * - * Set the base priority register - */ -extern void __set_BASEPRI(uint32_t basePri); - -/** - * @brief Return the Priority Mask value - * - * @return PriMask - * - * Return state of the priority mask bit from the priority mask register - */ -extern uint32_t __get_PRIMASK(void); - -/** - * @brief Set the Priority Mask value - * - * @param priMask PriMask - * - * Set the priority mask bit in the priority mask register - */ -extern void __set_PRIMASK(uint32_t priMask); - -/** - * @brief Return the Fault Mask value - * - * @return FaultMask - * - * Return the content of the fault mask register - */ -extern uint32_t __get_FAULTMASK(void); - -/** - * @brief Set the Fault Mask value - * - * @param faultMask faultMask value - * - * Set the fault mask register - */ -extern void __set_FAULTMASK(uint32_t faultMask); - -/** - * @brief Return the Control Register value -* -* @return Control value - * - * Return the content of the control register - */ -extern uint32_t __get_CONTROL(void); - -/** - * @brief Set the Control Register value - * - * @param control Control value - * - * Set the control register - */ -extern void __set_CONTROL(uint32_t control); - -/** - * @brief Reverse byte order in integer value - * - * @param value value to reverse - * @return reversed value - * - * Reverse byte order in integer value - */ -extern uint32_t __REV(uint32_t value); - -/** - * @brief Reverse byte order in unsigned short value - * - * @param value value to reverse - * @return reversed value - * - * Reverse byte order in unsigned short value - */ -extern uint32_t __REV16(uint16_t value); - -/** - * @brief Reverse byte order in signed short value with sign extension to integer - * - * @param value value to reverse - * @return reversed value - * - * Reverse byte order in signed short value with sign extension to integer - */ -extern int32_t __REVSH(int16_t value); - -/** - * @brief Reverse bit order of value - * - * @param value value to reverse - * @return reversed value - * - * Reverse bit order of value - */ -extern uint32_t __RBIT(uint32_t value); - -/** - * @brief LDR Exclusive (8 bit) - * - * @param *addr address pointer - * @return value of (*address) - * - * Exclusive LDR command for 8 bit value - */ -extern uint8_t __LDREXB(uint8_t *addr); - -/** - * @brief LDR Exclusive (16 bit) - * - * @param *addr address pointer - * @return value of (*address) - * - * Exclusive LDR command for 16 bit values - */ -extern uint16_t __LDREXH(uint16_t *addr); - -/** - * @brief LDR Exclusive (32 bit) - * - * @param *addr address pointer - * @return value of (*address) - * - * Exclusive LDR command for 32 bit values - */ -extern uint32_t __LDREXW(uint32_t *addr); - -/** - * @brief STR Exclusive (8 bit) - * - * @param value value to store - * @param *addr address pointer - * @return successful / failed - * - * Exclusive STR command for 8 bit values - */ -extern uint32_t __STREXB(uint8_t value, uint8_t *addr); - -/** - * @brief STR Exclusive (16 bit) - * - * @param value value to store - * @param *addr address pointer - * @return successful / failed - * - * Exclusive STR command for 16 bit values - */ -extern uint32_t __STREXH(uint16_t value, uint16_t *addr); - -/** - * @brief STR Exclusive (32 bit) - * - * @param value value to store - * @param *addr address pointer - * @return successful / failed - * - * Exclusive STR command for 32 bit values - */ -extern uint32_t __STREXW(uint32_t value, uint32_t *addr); - - -#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ -/* TASKING carm specific functions */ - -/* - * The CMSIS functions have been implemented as intrinsics in the compiler. - * Please use "carm -?i" to get an up to date list of all instrinsics, - * Including the CMSIS ones. - */ - -#endif - - -/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface - Core Function Interface containing: - - Core NVIC Functions - - Core SysTick Functions - - Core Reset Functions -*/ -/*@{*/ - -/* ########################## NVIC functions #################################### */ - -/** - * @brief Set the Priority Grouping in NVIC Interrupt Controller - * - * @param PriorityGroup is priority grouping field - * - * Set the priority grouping field using the required unlock sequence. - * The parameter priority_grouping is assigned to the field - * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used. - * In case of a conflict between priority grouping and available - * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - */ -static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ - reg_value = (reg_value | - (0x5FA << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} - -/** - * @brief Get the Priority Grouping from NVIC Interrupt Controller - * - * @return priority grouping field - * - * Get the priority grouping from NVIC Interrupt Controller. - * priority grouping is SCB->AIRCR [10:8] PRIGROUP field. - */ -static __INLINE uint32_t NVIC_GetPriorityGrouping(void) -{ - return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ -} - -/** - * @brief Enable Interrupt in NVIC Interrupt Controller - * - * @param IRQn The positive number of the external interrupt to enable - * - * Enable a device specific interupt in the NVIC interrupt controller. - * The interrupt number cannot be a negative value. - */ -static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ -} - -/** - * @brief Disable the interrupt line for external interrupt specified - * - * @param IRQn The positive number of the external interrupt to disable - * - * Disable a device specific interupt in the NVIC interrupt controller. - * The interrupt number cannot be a negative value. - */ -static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ -} - -/** - * @brief Read the interrupt pending bit for a device specific interrupt source - * - * @param IRQn The number of the device specifc interrupt - * @return 1 = interrupt pending, 0 = interrupt not pending - * - * Read the pending register in NVIC and return 1 if its status is pending, - * otherwise it returns 0 - */ -static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ -} - -/** - * @brief Set the pending bit for an external interrupt - * - * @param IRQn The number of the interrupt for set pending - * - * Set the pending bit for the specified interrupt. - * The interrupt number cannot be a negative value. - */ -static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ -} - -/** - * @brief Clear the pending bit for an external interrupt - * - * @param IRQn The number of the interrupt for clear pending - * - * Clear the pending bit for the specified interrupt. - * The interrupt number cannot be a negative value. - */ -static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ -} - -/** - * @brief Read the active bit for an external interrupt - * - * @param IRQn The number of the interrupt for read active bit - * @return 1 = interrupt active, 0 = interrupt not active - * - * Read the active register in NVIC and returns 1 if its status is active, - * otherwise it returns 0. - */ -static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ -} - -/** - * @brief Set the priority for an interrupt - * - * @param IRQn The number of the interrupt for set priority - * @param priority The priority to set - * - * Set the priority for the specified interrupt. The interrupt - * number can be positive to specify an external (device specific) - * interrupt, or negative to specify an internal (core) interrupt. - * - * Note: The priority cannot be set for every core interrupt. - */ -static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if(IRQn < 0) { - SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */ - else { - NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ -} - -/** - * @brief Read the priority for an interrupt - * - * @param IRQn The number of the interrupt for get priority - * @return The priority for the interrupt - * - * Read the priority for the specified interrupt. The interrupt - * number can be positive to specify an external (device specific) - * interrupt, or negative to specify an internal (core) interrupt. - * - * The returned priority value is automatically aligned to the implemented - * priority bits of the microcontroller. - * - * Note: The priority cannot be set for every core interrupt. - */ -static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ - - if(IRQn < 0) { - return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */ - else { - return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ -} - - -/** - * @brief Encode the priority for an interrupt - * - * @param PriorityGroup The used priority group - * @param PreemptPriority The preemptive priority value (starting from 0) - * @param SubPriority The sub priority value (starting from 0) - * @return The encoded priority for the interrupt - * - * Encode the priority for an interrupt with the given priority group, - * preemptive priority value and sub priority value. - * In case of a conflict between priority grouping and available - * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. - * - * The returned priority value can be used for NVIC_SetPriority(...) function - */ -static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; - SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; - - return ( - ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | - ((SubPriority & ((1 << (SubPriorityBits )) - 1))) - ); -} - - -/** - * @brief Decode the priority of an interrupt - * - * @param Priority The priority for the interrupt - * @param PriorityGroup The used priority group - * @param pPreemptPriority The preemptive priority value (starting from 0) - * @param pSubPriority The sub priority value (starting from 0) - * - * Decode an interrupt priority value with the given priority group to - * preemptive priority value and sub priority value. - * In case of a conflict between priority grouping and available - * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. - * - * The priority value can be retrieved with NVIC_GetPriority(...) function - */ -static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; - SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; - - *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); - *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); -} - - - -/* ################################## SysTick function ############################################ */ - -#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0) - -/** - * @brief Initialize and start the SysTick counter and its interrupt. - * - * @param ticks number of ticks between two interrupts - * @return 1 = failed, 0 = successful - * - * Initialise the system tick timer and its interrupt and start the - * system tick timer / counter in free running mode to generate - * periodical interrupts. - */ -static __INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ - - SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ - SysTick->VAL = 0; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0); /* Function successful */ -} - -#endif - - - - -/* ################################## Reset function ############################################ */ - -/** - * @brief Initiate a system reset request. - * - * Initiate a system reset request to reset the MCU - */ -static __INLINE void NVIC_SystemReset(void) -{ - SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - while(1); /* wait until reset */ -} - -/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */ - - - -/* ##################################### Debug In/Output function ########################################### */ - -/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface - Core Debug Interface containing: - - Core Debug Receive / Transmit Functions - - Core Debug Defines - - Core Debug Variables -*/ -/*@{*/ - -extern volatile int ITM_RxBuffer; /*!< variable to receive characters */ -#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */ - - -/** - * @brief Outputs a character via the ITM channel 0 - * - * @param ch character to output - * @return character to output - * - * The function outputs a character via the ITM channel 0. - * The function returns when no debugger is connected that has booked the output. - * It is blocking when a debugger is connected, but the previous character send is not transmitted. - */ -static __INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */ - (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ - (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0].u32 == 0); - ITM->PORT[0].u8 = (uint8_t) ch; - } - return (ch); -} - - -/** - * @brief Inputs a character via variable ITM_RxBuffer - * - * @return received character, -1 = no character received - * - * The function inputs a character via variable ITM_RxBuffer. - * The function returns when no debugger is connected that has booked the output. - * It is blocking when a debugger is connected, but the previous character send is not transmitted. - */ -static __INLINE int ITM_ReceiveChar (void) { - int ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - * @brief Check if a character via variable ITM_RxBuffer is available - * - * @return 1 = character available, 0 = no character available - * - * The function checks variable ITM_RxBuffer whether a character is available or not. - * The function returns '1' if a character is available and '0' if no character is available. - */ -static __INLINE int ITM_CheckChar (void) { - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { - return (0); /* no character available */ - } else { - return (1); /* character available */ - } -} - -/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */ - - -#ifdef __cplusplus -} -#endif - -/*@}*/ /* end of group CMSIS_CM3_core_definitions */ - -#endif /* __CM3_CORE_H__ */ - -/*lint -restore */ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s deleted file mode 100644 index a93e59b..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s +++ /dev/null @@ -1,469 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_hd.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x High Density Devices vector table for Atollic toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address, - * - Configure the clock system - * - Configure external SRAM mounted on STM3210E-EVAL board - * to be used as data memory (optional, to be enabled by user) - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF1E0F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word TIM8_BRK_IRQHandler - .word TIM8_UP_IRQHandler - .word TIM8_TRG_COM_IRQHandler - .word TIM8_CC_IRQHandler - .word ADC3_IRQHandler - .word FSMC_IRQHandler - .word SDIO_IRQHandler - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_5_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x High Density devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - - .weak TIM8_BRK_IRQHandler - .thumb_set TIM8_BRK_IRQHandler,Default_Handler - - .weak TIM8_UP_IRQHandler - .thumb_set TIM8_UP_IRQHandler,Default_Handler - - .weak TIM8_TRG_COM_IRQHandler - .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler - - .weak TIM8_CC_IRQHandler - .thumb_set TIM8_CC_IRQHandler,Default_Handler - - .weak ADC3_IRQHandler - .thumb_set ADC3_IRQHandler,Default_Handler - - .weak FSMC_IRQHandler - .thumb_set FSMC_IRQHandler,Default_Handler - - .weak SDIO_IRQHandler - .thumb_set SDIO_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_5_IRQHandler - .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s deleted file mode 100644 index 4945a70..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s +++ /dev/null @@ -1,451 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_hd_vl.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x High Density Value Line Devices vector table for Atollic - * toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system - * - Configure external SRAM mounted on STM32100E-EVAL board - * to be used as data memory (optional, to be enabled by user) - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word EXTI9_5_IRQHandler - .word TIM1_BRK_TIM15_IRQHandler - .word TIM1_UP_TIM16_IRQHandler - .word TIM1_TRG_COM_TIM17_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word CEC_IRQHandler - .word TIM12_IRQHandler - .word TIM13_IRQHandler - .word TIM14_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_DAC_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_5_IRQHandler - .word DMA2_Channel5_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x High Density Value line devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_TIM15_IRQHandler - .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler - - .weak TIM1_UP_TIM16_IRQHandler - .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_TIM17_IRQHandler - .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak CEC_IRQHandler - .thumb_set CEC_IRQHandler,Default_Handler - - .weak TIM12_IRQHandler - .thumb_set TIM12_IRQHandler,Default_Handler - - .weak TIM13_IRQHandler - .thumb_set TIM13_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_5_IRQHandler - .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler - - .weak DMA2_Channel5_IRQHandler - .thumb_set DMA2_Channel5_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ - diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s deleted file mode 100644 index 5f9df3d..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s +++ /dev/null @@ -1,347 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_ld.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x Low Density Devices vector table for Atollic toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address. - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word 0 - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word 0 - .word 0 - .word SPI1_IRQHandler - .word 0 - .word USART1_IRQHandler - .word USART2_IRQHandler - .word 0 - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x108. This is for boot in RAM mode for - STM32F10x Low Density devices.*/ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s deleted file mode 100644 index 3224b40..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s +++ /dev/null @@ -1,392 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_ld_vl.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x Low Density Value Line Devices vector table for Atollic toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word EXTI9_5_IRQHandler - .word TIM1_BRK_TIM15_IRQHandler - .word TIM1_UP_TIM16_IRQHandler - .word TIM1_TRG_COM_TIM17_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word 0 - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word 0 - .word 0 - .word SPI1_IRQHandler - .word 0 - .word USART1_IRQHandler - .word USART2_IRQHandler - .word 0 - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word CEC_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word TIM6_DAC_IRQHandler - .word TIM7_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x01CC. This is for boot in RAM mode for - STM32F10x Medium Value Line Density devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_TIM15_IRQHandler - .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler - - .weak TIM1_UP_TIM16_IRQHandler - .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_TIM17_IRQHandler - .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak CEC_IRQHandler - .thumb_set CEC_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ - diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s deleted file mode 100644 index bec2639..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s +++ /dev/null @@ -1,363 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_md.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x Medium Density Devices vector table for Atollic toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x108. This is for boot in RAM mode for - STM32F10x Medium Density devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ - diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s deleted file mode 100644 index b2fd0db..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s +++ /dev/null @@ -1,408 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_md_vl.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x Medium Density Value Line Devices vector table for Atollic - * toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word EXTI9_5_IRQHandler - .word TIM1_BRK_TIM15_IRQHandler - .word TIM1_UP_TIM16_IRQHandler - .word TIM1_TRG_COM_TIM17_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word CEC_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word TIM6_DAC_IRQHandler - .word TIM7_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x01CC. This is for boot in RAM mode for - STM32F10x Medium Value Line Density devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_TIM15_IRQHandler - .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler - - .weak TIM1_UP_TIM16_IRQHandler - .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_TIM17_IRQHandler - .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak CEC_IRQHandler - .thumb_set CEC_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ - diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s deleted file mode 100644 index baf697b..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s +++ /dev/null @@ -1,467 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_xl.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x XL-Density Devices vector table for TrueSTUDIO toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system and the external SRAM mounted on - * STM3210E-EVAL board to be used as data memory (optional, - * to be enabled by user) - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF1E0F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * @param None - * @retval None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -*******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_TIM9_IRQHandler - .word TIM1_UP_TIM10_IRQHandler - .word TIM1_TRG_COM_TIM11_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word TIM8_BRK_TIM12_IRQHandler - .word TIM8_UP_TIM13_IRQHandler - .word TIM8_TRG_COM_TIM14_IRQHandler - .word TIM8_CC_IRQHandler - .word ADC3_IRQHandler - .word FSMC_IRQHandler - .word SDIO_IRQHandler - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_5_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x XL-Density devices. */ -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_TIM9_IRQHandler - .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler - - .weak TIM1_UP_TIM10_IRQHandler - .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_TIM11_IRQHandler - .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - - .weak TIM8_BRK_TIM12_IRQHandler - .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler - - .weak TIM8_UP_TIM13_IRQHandler - .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler - - .weak TIM8_TRG_COM_TIM14_IRQHandler - .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler - - .weak TIM8_CC_IRQHandler - .thumb_set TIM8_CC_IRQHandler,Default_Handler - - .weak ADC3_IRQHandler - .thumb_set ADC3_IRQHandler,Default_Handler - - .weak FSMC_IRQHandler - .thumb_set FSMC_IRQHandler,Default_Handler - - .weak SDIO_IRQHandler - .thumb_set SDIO_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_5_IRQHandler - .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s deleted file mode 100644 index 833ece4..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s +++ /dev/null @@ -1,368 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_cl.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x Connectivity line devices vector table for MDK-ARM -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Configure the clock system -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; <h> Stack Configuration -; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - - -; <h> Heap Configuration -; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 and ADC2 - DCD CAN1_TX_IRQHandler ; CAN1 TX - DCD CAN1_RX0_IRQHandler ; CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C1 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line - DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4 - DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 - DCD ETH_IRQHandler ; Ethernet - DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line - DCD CAN2_TX_IRQHandler ; CAN2 TX - DCD CAN2_RX0_IRQHandler ; CAN2 RX0 - DCD CAN2_RX1_IRQHandler ; CAN2 RX1 - DCD CAN2_SCE_IRQHandler ; CAN2 SCE - DCD OTG_FS_IRQHandler ; USB OTG FS -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT SystemInit - IMPORT __main - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_2_IRQHandler [WEAK] - EXPORT CAN1_TX_IRQHandler [WEAK] - EXPORT CAN1_RX0_IRQHandler [WEAK] - EXPORT CAN1_RX1_IRQHandler [WEAK] - EXPORT CAN1_SCE_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_IRQHandler [WEAK] - EXPORT TIM1_UP_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTCAlarm_IRQHandler [WEAK] - EXPORT OTG_FS_WKUP_IRQHandler [WEAK] - EXPORT TIM5_IRQHandler [WEAK] - EXPORT SPI3_IRQHandler [WEAK] - EXPORT UART4_IRQHandler [WEAK] - EXPORT UART5_IRQHandler [WEAK] - EXPORT TIM6_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - EXPORT DMA2_Channel1_IRQHandler [WEAK] - EXPORT DMA2_Channel2_IRQHandler [WEAK] - EXPORT DMA2_Channel3_IRQHandler [WEAK] - EXPORT DMA2_Channel4_IRQHandler [WEAK] - EXPORT DMA2_Channel5_IRQHandler [WEAK] - EXPORT ETH_IRQHandler [WEAK] - EXPORT ETH_WKUP_IRQHandler [WEAK] - EXPORT CAN2_TX_IRQHandler [WEAK] - EXPORT CAN2_RX0_IRQHandler [WEAK] - EXPORT CAN2_RX1_IRQHandler [WEAK] - EXPORT CAN2_SCE_IRQHandler [WEAK] - EXPORT OTG_FS_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_2_IRQHandler -CAN1_TX_IRQHandler -CAN1_RX0_IRQHandler -CAN1_RX1_IRQHandler -CAN1_SCE_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_IRQHandler -TIM1_UP_IRQHandler -TIM1_TRG_COM_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTCAlarm_IRQHandler -OTG_FS_WKUP_IRQHandler -TIM5_IRQHandler -SPI3_IRQHandler -UART4_IRQHandler -UART5_IRQHandler -TIM6_IRQHandler -TIM7_IRQHandler -DMA2_Channel1_IRQHandler -DMA2_Channel2_IRQHandler -DMA2_Channel3_IRQHandler -DMA2_Channel4_IRQHandler -DMA2_Channel5_IRQHandler -ETH_IRQHandler -ETH_WKUP_IRQHandler -CAN2_TX_IRQHandler -CAN2_RX0_IRQHandler -CAN2_RX1_IRQHandler -CAN2_SCE_IRQHandler -OTG_FS_IRQHandler - - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s deleted file mode 100644 index 8a19827..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s +++ /dev/null @@ -1,358 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_hd.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x High Density Devices vector table for MDK-ARM -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Configure the clock system and also configure the external -;* SRAM mounted on STM3210E-EVAL board to be used as data -;* memory (optional, to be enabled by user) -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; <h> Stack Configuration -; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - -; <h> Heap Configuration -; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - DCD TIM8_BRK_IRQHandler ; TIM8 Break - DCD TIM8_UP_IRQHandler ; TIM8 Update - DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation - DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare - DCD ADC3_IRQHandler ; ADC3 - DCD FSMC_IRQHandler ; FSMC - DCD SDIO_IRQHandler ; SDIO - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - IMPORT SystemInit - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_2_IRQHandler [WEAK] - EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] - EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] - EXPORT CAN1_RX1_IRQHandler [WEAK] - EXPORT CAN1_SCE_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_IRQHandler [WEAK] - EXPORT TIM1_UP_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTCAlarm_IRQHandler [WEAK] - EXPORT USBWakeUp_IRQHandler [WEAK] - EXPORT TIM8_BRK_IRQHandler [WEAK] - EXPORT TIM8_UP_IRQHandler [WEAK] - EXPORT TIM8_TRG_COM_IRQHandler [WEAK] - EXPORT TIM8_CC_IRQHandler [WEAK] - EXPORT ADC3_IRQHandler [WEAK] - EXPORT FSMC_IRQHandler [WEAK] - EXPORT SDIO_IRQHandler [WEAK] - EXPORT TIM5_IRQHandler [WEAK] - EXPORT SPI3_IRQHandler [WEAK] - EXPORT UART4_IRQHandler [WEAK] - EXPORT UART5_IRQHandler [WEAK] - EXPORT TIM6_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - EXPORT DMA2_Channel1_IRQHandler [WEAK] - EXPORT DMA2_Channel2_IRQHandler [WEAK] - EXPORT DMA2_Channel3_IRQHandler [WEAK] - EXPORT DMA2_Channel4_5_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_2_IRQHandler -USB_HP_CAN1_TX_IRQHandler -USB_LP_CAN1_RX0_IRQHandler -CAN1_RX1_IRQHandler -CAN1_SCE_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_IRQHandler -TIM1_UP_IRQHandler -TIM1_TRG_COM_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTCAlarm_IRQHandler -USBWakeUp_IRQHandler -TIM8_BRK_IRQHandler -TIM8_UP_IRQHandler -TIM8_TRG_COM_IRQHandler -TIM8_CC_IRQHandler -ADC3_IRQHandler -FSMC_IRQHandler -SDIO_IRQHandler -TIM5_IRQHandler -SPI3_IRQHandler -UART4_IRQHandler -UART5_IRQHandler -TIM6_IRQHandler -TIM7_IRQHandler -DMA2_Channel1_IRQHandler -DMA2_Channel2_IRQHandler -DMA2_Channel3_IRQHandler -DMA2_Channel4_5_IRQHandler - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s deleted file mode 100644 index f18be4b..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s +++ /dev/null @@ -1,297 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_ld.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x Low Density Devices vector table for MDK-ARM -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Configure the clock system -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; <h> Stack Configuration -; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - - -; <h> Heap Configuration -; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1_2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD 0 ; Reserved - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SPI1_IRQHandler ; SPI1 - DCD 0 ; Reserved - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD 0 ; Reserved - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler routine -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - IMPORT SystemInit - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_2_IRQHandler [WEAK] - EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] - EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] - EXPORT CAN1_RX1_IRQHandler [WEAK] - EXPORT CAN1_SCE_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_IRQHandler [WEAK] - EXPORT TIM1_UP_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTCAlarm_IRQHandler [WEAK] - EXPORT USBWakeUp_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_2_IRQHandler -USB_HP_CAN1_TX_IRQHandler -USB_LP_CAN1_RX0_IRQHandler -CAN1_RX1_IRQHandler -CAN1_SCE_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_IRQHandler -TIM1_UP_IRQHandler -TIM1_TRG_COM_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -SPI1_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -EXTI15_10_IRQHandler -RTCAlarm_IRQHandler -USBWakeUp_IRQHandler - - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s deleted file mode 100644 index f7240dc..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s +++ /dev/null @@ -1,304 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_ld_vl.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x Low Density Value Line Devices vector table -;* for MDK-ARM toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Configure the clock system -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; <h> Stack Configuration -; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - - -; <h> Heap Configuration -; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_IRQHandler ; ADC1 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 - DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 - DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD 0 ; Reserved - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SPI1_IRQHandler ; SPI1 - DCD 0 ; Reserved - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD 0 ; Reserved - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD CEC_IRQHandler ; HDMI-CEC - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun - DCD TIM7_IRQHandler ; TIM7 -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - IMPORT SystemInit - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] - EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTCAlarm_IRQHandler [WEAK] - EXPORT CEC_IRQHandler [WEAK] - EXPORT TIM6_DAC_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_TIM15_IRQHandler -TIM1_UP_TIM16_IRQHandler -TIM1_TRG_COM_TIM17_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -SPI1_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -EXTI15_10_IRQHandler -RTCAlarm_IRQHandler -CEC_IRQHandler -TIM6_DAC_IRQHandler -TIM7_IRQHandler - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s deleted file mode 100644 index 076aa7f..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s +++ /dev/null @@ -1,315 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_md_vl.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x Medium Density Value Line Devices vector table -;* for MDK-ARM toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Configure the clock system -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; <h> Stack Configuration -; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - - -; <h> Heap Configuration -; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_IRQHandler ; ADC1 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 - DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 - DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD CEC_IRQHandler ; HDMI-CEC - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun - DCD TIM7_IRQHandler ; TIM7 -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - IMPORT SystemInit - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] - EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTCAlarm_IRQHandler [WEAK] - EXPORT CEC_IRQHandler [WEAK] - EXPORT TIM6_DAC_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_TIM15_IRQHandler -TIM1_UP_TIM16_IRQHandler -TIM1_TRG_COM_TIM17_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTCAlarm_IRQHandler -CEC_IRQHandler -TIM6_DAC_IRQHandler -TIM7_IRQHandler - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s deleted file mode 100644 index 9fbc640..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s +++ /dev/null @@ -1,358 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_xl.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x XL-Density Devices vector table for MDK-ARM -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Configure the clock system and also configure the external -;* SRAM mounted on STM3210E-EVAL board to be used as data -;* memory (optional, to be enabled by user) -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; <h> Stack Configuration -; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - -; <h> Heap Configuration -; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 - DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 - DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 - DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 - DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 - DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare - DCD ADC3_IRQHandler ; ADC3 - DCD FSMC_IRQHandler ; FSMC - DCD SDIO_IRQHandler ; SDIO - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - IMPORT SystemInit - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_2_IRQHandler [WEAK] - EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] - EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] - EXPORT CAN1_RX1_IRQHandler [WEAK] - EXPORT CAN1_SCE_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] - EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTCAlarm_IRQHandler [WEAK] - EXPORT USBWakeUp_IRQHandler [WEAK] - EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK] - EXPORT TIM8_UP_TIM13_IRQHandler [WEAK] - EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK] - EXPORT TIM8_CC_IRQHandler [WEAK] - EXPORT ADC3_IRQHandler [WEAK] - EXPORT FSMC_IRQHandler [WEAK] - EXPORT SDIO_IRQHandler [WEAK] - EXPORT TIM5_IRQHandler [WEAK] - EXPORT SPI3_IRQHandler [WEAK] - EXPORT UART4_IRQHandler [WEAK] - EXPORT UART5_IRQHandler [WEAK] - EXPORT TIM6_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - EXPORT DMA2_Channel1_IRQHandler [WEAK] - EXPORT DMA2_Channel2_IRQHandler [WEAK] - EXPORT DMA2_Channel3_IRQHandler [WEAK] - EXPORT DMA2_Channel4_5_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_2_IRQHandler -USB_HP_CAN1_TX_IRQHandler -USB_LP_CAN1_RX0_IRQHandler -CAN1_RX1_IRQHandler -CAN1_SCE_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_TIM9_IRQHandler -TIM1_UP_TIM10_IRQHandler -TIM1_TRG_COM_TIM11_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTCAlarm_IRQHandler -USBWakeUp_IRQHandler -TIM8_BRK_TIM12_IRQHandler -TIM8_UP_TIM13_IRQHandler -TIM8_TRG_COM_TIM14_IRQHandler -TIM8_CC_IRQHandler -ADC3_IRQHandler -FSMC_IRQHandler -SDIO_IRQHandler -TIM5_IRQHandler -SPI3_IRQHandler -UART4_IRQHandler -UART5_IRQHandler -TIM6_IRQHandler -TIM7_IRQHandler -DMA2_Channel1_IRQHandler -DMA2_Channel2_IRQHandler -DMA2_Channel3_IRQHandler -DMA2_Channel4_5_IRQHandler - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s deleted file mode 100644 index cf0531e..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s +++ /dev/null @@ -1,468 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_cl.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x Connectivity line Devices vector table for RIDE7 toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR - * address. - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF1E0F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss - -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * @param None - * @retval None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler - -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -*******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word CAN1_TX_IRQHandler - .word CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word OTG_FS_WKUP_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_IRQHandler - .word DMA2_Channel5_IRQHandler - .word ETH_IRQHandler - .word ETH_WKUP_IRQHandler - .word CAN2_TX_IRQHandler - .word CAN2_RX0_IRQHandler - .word CAN2_RX1_IRQHandler - .word CAN2_SCE_IRQHandler - .word OTG_FS_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x Connectivity line Devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak CAN1_TX_IRQHandler - .thumb_set CAN1_TX_IRQHandler,Default_Handler - - .weak CAN1_RX0_IRQHandler - .thumb_set CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak OTG_FS_WKUP_IRQHandler - .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_IRQHandler - .thumb_set DMA2_Channel4_IRQHandler,Default_Handler - - .weak DMA2_Channel5_IRQHandler - .thumb_set DMA2_Channel5_IRQHandler,Default_Handler - - .weak ETH_IRQHandler - .thumb_set ETH_IRQHandler,Default_Handler - - .weak ETH_WKUP_IRQHandler - .thumb_set ETH_WKUP_IRQHandler,Default_Handler - - .weak CAN2_TX_IRQHandler - .thumb_set CAN2_TX_IRQHandler,Default_Handler - - .weak CAN2_RX0_IRQHandler - .thumb_set CAN2_RX0_IRQHandler,Default_Handler - - .weak CAN2_RX1_IRQHandler - .thumb_set CAN2_RX1_IRQHandler,Default_Handler - - .weak CAN2_SCE_IRQHandler - .thumb_set CAN2_SCE_IRQHandler,Default_Handler - - .weak OTG_FS_IRQHandler - .thumb_set OTG_FS_IRQHandler ,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s deleted file mode 100644 index 09291a5..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s +++ /dev/null @@ -1,465 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_hd.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x High Density Devices vector table for RIDE7 toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system and the external SRAM mounted on - * STM3210E-EVAL board to be used as data memory (optional, - * to be enabled by user) - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss -/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ - -.equ BootRAM, 0xF1E0F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * @param None - * @retval None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -*******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word TIM8_BRK_IRQHandler - .word TIM8_UP_IRQHandler - .word TIM8_TRG_COM_IRQHandler - .word TIM8_CC_IRQHandler - .word ADC3_IRQHandler - .word FSMC_IRQHandler - .word SDIO_IRQHandler - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_5_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x High Density devices. */ -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - - .weak TIM8_BRK_IRQHandler - .thumb_set TIM8_BRK_IRQHandler,Default_Handler - - .weak TIM8_UP_IRQHandler - .thumb_set TIM8_UP_IRQHandler,Default_Handler - - .weak TIM8_TRG_COM_IRQHandler - .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler - - .weak TIM8_CC_IRQHandler - .thumb_set TIM8_CC_IRQHandler,Default_Handler - - .weak ADC3_IRQHandler - .thumb_set ADC3_IRQHandler,Default_Handler - - .weak FSMC_IRQHandler - .thumb_set FSMC_IRQHandler,Default_Handler - - .weak SDIO_IRQHandler - .thumb_set SDIO_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_5_IRQHandler - .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s deleted file mode 100644 index 460f06c..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s +++ /dev/null @@ -1,442 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_hd_vl.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x High Density Value Line Devices vector table for RIDE7 - * toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system and the external SRAM mounted on - * STM32100E-EVAL board to be used as data memory (optional, - * to be enabled by user) - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * @param None - * @retval None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word EXTI9_5_IRQHandler - .word TIM1_BRK_TIM15_IRQHandler - .word TIM1_UP_TIM16_IRQHandler - .word TIM1_TRG_COM_TIM17_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word CEC_IRQHandler - .word TIM12_IRQHandler - .word TIM13_IRQHandler - .word TIM14_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_DAC_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_5_IRQHandler - .word DMA2_Channel5_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x High Density Value line devices. */ - -/******************************************************************************* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_TIM15_IRQHandler - .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler - - .weak TIM1_UP_TIM16_IRQHandler - .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_TIM17_IRQHandler - .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak CEC_IRQHandler - .thumb_set CEC_IRQHandler,Default_Handler - - .weak TIM12_IRQHandler - .thumb_set TIM12_IRQHandler,Default_Handler - - .weak TIM13_IRQHandler - .thumb_set TIM13_IRQHandler,Default_Handler - - .weak TIM14_IRQHandler - .thumb_set TIM14_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_DAC_IRQHandler - .thumb_set TIM6_DAC_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_5_IRQHandler - .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler - - .weak DMA2_Channel5_IRQHandler - .thumb_set DMA2_Channel5_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s deleted file mode 100644 index d771126..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s +++ /dev/null @@ -1,343 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_ld.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x Low Density Devices vector table for RIDE7 toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * @param None - * @retval None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word 0 - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word 0 - .word 0 - .word SPI1_IRQHandler - .word 0 - .word USART1_IRQHandler - .word USART2_IRQHandler - .word 0 - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x108. This is for boot in RAM mode for - STM32F10x Low Density devices.*/ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s deleted file mode 100644 index 7333b16..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s +++ /dev/null @@ -1,358 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_md.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x Medium Density Devices vector table for RIDE7 toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * @param None - * @retval None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x108. This is for boot in RAM mode for - STM32F10x Medium Density devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s deleted file mode 100644 index 3bc91f8..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s +++ /dev/null @@ -1,465 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_xl.s - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief STM32F10x XL-Density Devices vector table for RIDE7 toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system and the external SRAM mounted on - * STM3210E-EVAL board to be used as data memory (optional, - * to be enabled by user) - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss -/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ - -.equ BootRAM, 0xF1E0F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * @param None - * @retval None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -*******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_TIM9_IRQHandler - .word TIM1_UP_TIM10_IRQHandler - .word TIM1_TRG_COM_TIM11_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word TIM8_BRK_TIM12_IRQHandler - .word TIM8_UP_TIM13_IRQHandler - .word TIM8_TRG_COM_TIM14_IRQHandler - .word TIM8_CC_IRQHandler - .word ADC3_IRQHandler - .word FSMC_IRQHandler - .word SDIO_IRQHandler - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_5_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x XL Density devices. */ -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_TIM9_IRQHandler - .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler - - .weak TIM1_UP_TIM10_IRQHandler - .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_TIM11_IRQHandler - .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - - .weak TIM8_BRK_TIM12_IRQHandler - .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler - - .weak TIM8_UP_TIM13_IRQHandler - .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler - - .weak TIM8_TRG_COM_TIM14_IRQHandler - .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler - - .weak TIM8_CC_IRQHandler - .thumb_set TIM8_CC_IRQHandler,Default_Handler - - .weak ADC3_IRQHandler - .thumb_set ADC3_IRQHandler,Default_Handler - - .weak FSMC_IRQHandler - .thumb_set FSMC_IRQHandler,Default_Handler - - .weak SDIO_IRQHandler - .thumb_set SDIO_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_5_IRQHandler - .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s deleted file mode 100644 index 0c87160..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s +++ /dev/null @@ -1,507 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* -;* File Name : startup_stm32f10x_cl.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x Connectivity line devices vector table for -;* EWARM toolchain. -;* This module performs: -;* - Set the initial SP -;* - Configure the clock system -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR -;* address. -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - - DATA -__vector_table - DCD sfe(CSTACK) - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 and ADC2 - DCD CAN1_TX_IRQHandler ; CAN1 TX - DCD CAN1_RX0_IRQHandler ; CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C1 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line - DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4 - DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 - DCD ETH_IRQHandler ; Ethernet - DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line - DCD CAN2_TX_IRQHandler ; CAN2 TX - DCD CAN2_RX0_IRQHandler ; CAN2 RX0 - DCD CAN2_RX1_IRQHandler ; CAN2 RX1 - DCD CAN2_SCE_IRQHandler ; CAN2 SCE - DCD OTG_FS_IRQHandler ; USB OTG FS - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK Reset_Handler - SECTION .text:CODE:REORDER(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_2_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC1_2_IRQHandler - B ADC1_2_IRQHandler - - PUBWEAK CAN1_TX_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_TX_IRQHandler - B CAN1_TX_IRQHandler - - PUBWEAK CAN1_RX0_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_RX0_IRQHandler - B CAN1_RX0_IRQHandler - - PUBWEAK CAN1_RX1_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_RX1_IRQHandler - B CAN1_RX1_IRQHandler - - PUBWEAK CAN1_SCE_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_SCE_IRQHandler - B CAN1_SCE_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_BRK_IRQHandler - B TIM1_BRK_IRQHandler - - PUBWEAK TIM1_UP_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_UP_IRQHandler - B TIM1_UP_IRQHandler - - PUBWEAK TIM1_TRG_COM_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_TRG_COM_IRQHandler - B TIM1_TRG_COM_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK TIM4_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM4_IRQHandler - B TIM4_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK I2C2_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_EV_IRQHandler - B I2C2_EV_IRQHandler - - PUBWEAK I2C2_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_ER_IRQHandler - B I2C2_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK SPI2_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI2_IRQHandler - B SPI2_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK USART3_IRQHandler - SECTION .text:CODE:REORDER(1) -USART3_IRQHandler - B USART3_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTCAlarm_IRQHandler - SECTION .text:CODE:REORDER(1) -RTCAlarm_IRQHandler - B RTCAlarm_IRQHandler - - PUBWEAK OTG_FS_WKUP_IRQHandler - SECTION .text:CODE:REORDER(1) -OTG_FS_WKUP_IRQHandler - B OTG_FS_WKUP_IRQHandler - - PUBWEAK TIM5_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM5_IRQHandler - B TIM5_IRQHandler - - PUBWEAK SPI3_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI3_IRQHandler - B SPI3_IRQHandler - - PUBWEAK UART4_IRQHandler - SECTION .text:CODE:REORDER(1) -UART4_IRQHandler - B UART4_IRQHandler - - PUBWEAK UART5_IRQHandler - SECTION .text:CODE:REORDER(1) -UART5_IRQHandler - B UART5_IRQHandler - - PUBWEAK TIM6_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM6_IRQHandler - B TIM6_IRQHandler - - PUBWEAK TIM7_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM7_IRQHandler - B TIM7_IRQHandler - - PUBWEAK DMA2_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel1_IRQHandler - B DMA2_Channel1_IRQHandler - - PUBWEAK DMA2_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel2_IRQHandler - B DMA2_Channel2_IRQHandler - - PUBWEAK DMA2_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel3_IRQHandler - B DMA2_Channel3_IRQHandler - - PUBWEAK DMA2_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel4_IRQHandler - B DMA2_Channel4_IRQHandler - - PUBWEAK DMA2_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel5_IRQHandler - B DMA2_Channel5_IRQHandler - - PUBWEAK ETH_IRQHandler - SECTION .text:CODE:REORDER(1) -ETH_IRQHandler - B ETH_IRQHandler - - PUBWEAK ETH_WKUP_IRQHandler - SECTION .text:CODE:REORDER(1) -ETH_WKUP_IRQHandler - B ETH_WKUP_IRQHandler - - PUBWEAK CAN2_TX_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN2_TX_IRQHandler - B CAN2_TX_IRQHandler - - PUBWEAK CAN2_RX0_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN2_RX0_IRQHandler - B CAN2_RX0_IRQHandler - - PUBWEAK CAN2_RX1_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN2_RX1_IRQHandler - B CAN2_RX1_IRQHandler - - PUBWEAK CAN2_SCE_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN2_SCE_IRQHandler - B CAN2_SCE_IRQHandler - - PUBWEAK OTG_FS_IRQHandler - SECTION .text:CODE:REORDER(1) -OTG_FS_IRQHandler - B OTG_FS_IRQHandler - - END -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s deleted file mode 100644 index 11ccfe3..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s +++ /dev/null @@ -1,496 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_hd.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x High Density Devices vector table for EWARM -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Configure the clock system and the external SRAM -;* mounted on STM3210E-EVAL board to be used as data -;* memory (optional, to be enabled by user) -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR address, -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - - DATA - -__vector_table - DCD sfe(CSTACK) - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - DCD TIM8_BRK_IRQHandler ; TIM8 Break - DCD TIM8_UP_IRQHandler ; TIM8 Update - DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation - DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare - DCD ADC3_IRQHandler ; ADC3 - DCD FSMC_IRQHandler ; FSMC - DCD SDIO_IRQHandler ; SDIO - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK Reset_Handler - SECTION .text:CODE:REORDER(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_2_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC1_2_IRQHandler - B ADC1_2_IRQHandler - - PUBWEAK USB_HP_CAN1_TX_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_HP_CAN1_TX_IRQHandler - B USB_HP_CAN1_TX_IRQHandler - - PUBWEAK USB_LP_CAN1_RX0_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_LP_CAN1_RX0_IRQHandler - B USB_LP_CAN1_RX0_IRQHandler - - PUBWEAK CAN1_RX1_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_RX1_IRQHandler - B CAN1_RX1_IRQHandler - - PUBWEAK CAN1_SCE_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_SCE_IRQHandler - B CAN1_SCE_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_BRK_IRQHandler - B TIM1_BRK_IRQHandler - - PUBWEAK TIM1_UP_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_UP_IRQHandler - B TIM1_UP_IRQHandler - - PUBWEAK TIM1_TRG_COM_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_TRG_COM_IRQHandler - B TIM1_TRG_COM_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK TIM4_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM4_IRQHandler - B TIM4_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK I2C2_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_EV_IRQHandler - B I2C2_EV_IRQHandler - - PUBWEAK I2C2_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_ER_IRQHandler - B I2C2_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK SPI2_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI2_IRQHandler - B SPI2_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK USART3_IRQHandler - SECTION .text:CODE:REORDER(1) -USART3_IRQHandler - B USART3_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTCAlarm_IRQHandler - SECTION .text:CODE:REORDER(1) -RTCAlarm_IRQHandler - B RTCAlarm_IRQHandler - - PUBWEAK USBWakeUp_IRQHandler - SECTION .text:CODE:REORDER(1) -USBWakeUp_IRQHandler - B USBWakeUp_IRQHandler - - PUBWEAK TIM8_BRK_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_BRK_IRQHandler - B TIM8_BRK_IRQHandler - - PUBWEAK TIM8_UP_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_UP_IRQHandler - B TIM8_UP_IRQHandler - - PUBWEAK TIM8_TRG_COM_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_TRG_COM_IRQHandler - B TIM8_TRG_COM_IRQHandler - - PUBWEAK TIM8_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_CC_IRQHandler - B TIM8_CC_IRQHandler - - PUBWEAK ADC3_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC3_IRQHandler - B ADC3_IRQHandler - - PUBWEAK FSMC_IRQHandler - SECTION .text:CODE:REORDER(1) -FSMC_IRQHandler - B FSMC_IRQHandler - - PUBWEAK SDIO_IRQHandler - SECTION .text:CODE:REORDER(1) -SDIO_IRQHandler - B SDIO_IRQHandler - - PUBWEAK TIM5_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM5_IRQHandler - B TIM5_IRQHandler - - PUBWEAK SPI3_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI3_IRQHandler - B SPI3_IRQHandler - - PUBWEAK UART4_IRQHandler - SECTION .text:CODE:REORDER(1) -UART4_IRQHandler - B UART4_IRQHandler - - PUBWEAK UART5_IRQHandler - SECTION .text:CODE:REORDER(1) -UART5_IRQHandler - B UART5_IRQHandler - - PUBWEAK TIM6_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM6_IRQHandler - B TIM6_IRQHandler - - PUBWEAK TIM7_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM7_IRQHandler - B TIM7_IRQHandler - - PUBWEAK DMA2_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel1_IRQHandler - B DMA2_Channel1_IRQHandler - - PUBWEAK DMA2_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel2_IRQHandler - B DMA2_Channel2_IRQHandler - - PUBWEAK DMA2_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel3_IRQHandler - B DMA2_Channel3_IRQHandler - - PUBWEAK DMA2_Channel4_5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel4_5_IRQHandler - B DMA2_Channel4_5_IRQHandler - - - END - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s deleted file mode 100644 index 1c0a3e1..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s +++ /dev/null @@ -1,366 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_ld.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x Low Density Devices vector table for EWARM -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Configure the clock system -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR -;* address. -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - - DATA -__vector_table - DCD sfe(CSTACK) - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD 0 ; Reserved - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SPI1_IRQHandler ; SPI1 - DCD 0 ; Reserved - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD 0 ; Reserved - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK Reset_Handler - SECTION .text:CODE:REORDER(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_2_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC1_2_IRQHandler - B ADC1_2_IRQHandler - - PUBWEAK USB_HP_CAN1_TX_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_HP_CAN1_TX_IRQHandler - B USB_HP_CAN1_TX_IRQHandler - - PUBWEAK USB_LP_CAN1_RX0_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_LP_CAN1_RX0_IRQHandler - B USB_LP_CAN1_RX0_IRQHandler - - PUBWEAK CAN1_RX1_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_RX1_IRQHandler - B CAN1_RX1_IRQHandler - - PUBWEAK CAN1_SCE_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_SCE_IRQHandler - B CAN1_SCE_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_BRK_IRQHandler - B TIM1_BRK_IRQHandler - - PUBWEAK TIM1_UP_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_UP_IRQHandler - B TIM1_UP_IRQHandler - - PUBWEAK TIM1_TRG_COM_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_TRG_COM_IRQHandler - B TIM1_TRG_COM_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTCAlarm_IRQHandler - SECTION .text:CODE:REORDER(1) -RTCAlarm_IRQHandler - B RTCAlarm_IRQHandler - - PUBWEAK USBWakeUp_IRQHandler - SECTION .text:CODE:REORDER(1) -USBWakeUp_IRQHandler - B USBWakeUp_IRQHandler - - END -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s deleted file mode 100644 index 85531c5..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s +++ /dev/null @@ -1,369 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_ld_vl.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x Low Density Value Line Devices vector table -;* for EWARM toolchain. -;* This module performs: -;* - Set the initial SP -;* - Configure the clock system -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR -;* address. -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - - DATA -__vector_table - DCD sfe(CSTACK) - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_IRQHandler ; ADC1 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 - DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 - DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD 0 ; Reserved - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SPI1_IRQHandler ; SPI1 - DCD 0 ; Reserved - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD 0 ; Reserved - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD CEC_IRQHandler ; HDMI-CEC - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun - DCD TIM7_IRQHandler ; TIM7 - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK Reset_Handler - SECTION .text:CODE:REORDER(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC1_IRQHandler - B ADC1_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_TIM15_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_BRK_TIM15_IRQHandler - B TIM1_BRK_TIM15_IRQHandler - - PUBWEAK TIM1_UP_TIM16_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_UP_TIM16_IRQHandler - B TIM1_UP_TIM16_IRQHandler - - PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_TRG_COM_TIM17_IRQHandler - B TIM1_TRG_COM_TIM17_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTCAlarm_IRQHandler - SECTION .text:CODE:REORDER(1) -RTCAlarm_IRQHandler - B RTCAlarm_IRQHandler - - PUBWEAK CEC_IRQHandler - SECTION .text:CODE:REORDER(1) -CEC_IRQHandler - B CEC_IRQHandler - - PUBWEAK TIM6_DAC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM6_DAC_IRQHandler - B TIM6_DAC_IRQHandler - - PUBWEAK TIM7_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM7_IRQHandler - B TIM7_IRQHandler - - END -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s deleted file mode 100644 index 7a25707..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s +++ /dev/null @@ -1,394 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_md_vl.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x Medium Density Value Line Devices vector table -;* for EWARM toolchain. -;* This module performs: -;* - Set the initial SP -;* - Configure the clock system -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR -;* address. -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - - DATA -__vector_table - DCD sfe(CSTACK) - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_IRQHandler ; ADC1 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 - DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 - DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD CEC_IRQHandler ; HDMI-CEC - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun - DCD TIM7_IRQHandler ; TIM7 - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK Reset_Handler - SECTION .text:CODE:REORDER(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC1_IRQHandler - B ADC1_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_TIM15_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_BRK_TIM15_IRQHandler - B TIM1_BRK_TIM15_IRQHandler - - PUBWEAK TIM1_UP_TIM16_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_UP_TIM16_IRQHandler - B TIM1_UP_TIM16_IRQHandler - - PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_TRG_COM_TIM17_IRQHandler - B TIM1_TRG_COM_TIM17_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK TIM4_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM4_IRQHandler - B TIM4_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK I2C2_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_EV_IRQHandler - B I2C2_EV_IRQHandler - - PUBWEAK I2C2_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_ER_IRQHandler - B I2C2_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK SPI2_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI2_IRQHandler - B SPI2_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK USART3_IRQHandler - SECTION .text:CODE:REORDER(1) -USART3_IRQHandler - B USART3_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTCAlarm_IRQHandler - SECTION .text:CODE:REORDER(1) -RTCAlarm_IRQHandler - B RTCAlarm_IRQHandler - - PUBWEAK CEC_IRQHandler - SECTION .text:CODE:REORDER(1) -CEC_IRQHandler - B CEC_IRQHandler - - PUBWEAK TIM6_DAC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM6_DAC_IRQHandler - B TIM6_DAC_IRQHandler - - PUBWEAK TIM7_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM7_IRQHandler - B TIM7_IRQHandler - - END -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s deleted file mode 100644 index 029761a..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s +++ /dev/null @@ -1,496 +0,0 @@ -;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_xl.s -;* Author : MCD Application Team -;* Version : V3.5.0 -;* Date : 11-March-2011 -;* Description : STM32F10x XL-Density Devices vector table for EWARM -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Configure the clock system and the external SRAM -;* mounted on STM3210E-EVAL board to be used as data -;* memory (optional, to be enabled by user) -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR address, -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - - DATA - -__vector_table - DCD sfe(CSTACK) - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 - DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 - DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 - DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 - DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 - DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare - DCD ADC3_IRQHandler ; ADC3 - DCD FSMC_IRQHandler ; FSMC - DCD SDIO_IRQHandler ; SDIO - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK Reset_Handler - SECTION .text:CODE:REORDER(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_2_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC1_2_IRQHandler - B ADC1_2_IRQHandler - - PUBWEAK USB_HP_CAN1_TX_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_HP_CAN1_TX_IRQHandler - B USB_HP_CAN1_TX_IRQHandler - - PUBWEAK USB_LP_CAN1_RX0_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_LP_CAN1_RX0_IRQHandler - B USB_LP_CAN1_RX0_IRQHandler - - PUBWEAK CAN1_RX1_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_RX1_IRQHandler - B CAN1_RX1_IRQHandler - - PUBWEAK CAN1_SCE_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_SCE_IRQHandler - B CAN1_SCE_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_TIM9_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_BRK_TIM9_IRQHandler - B TIM1_BRK_TIM9_IRQHandler - - PUBWEAK TIM1_UP_TIM10_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_UP_TIM10_IRQHandler - B TIM1_UP_TIM10_IRQHandler - - PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_TRG_COM_TIM11_IRQHandler - B TIM1_TRG_COM_TIM11_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK TIM4_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM4_IRQHandler - B TIM4_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK I2C2_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_EV_IRQHandler - B I2C2_EV_IRQHandler - - PUBWEAK I2C2_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_ER_IRQHandler - B I2C2_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK SPI2_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI2_IRQHandler - B SPI2_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK USART3_IRQHandler - SECTION .text:CODE:REORDER(1) -USART3_IRQHandler - B USART3_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTCAlarm_IRQHandler - SECTION .text:CODE:REORDER(1) -RTCAlarm_IRQHandler - B RTCAlarm_IRQHandler - - PUBWEAK USBWakeUp_IRQHandler - SECTION .text:CODE:REORDER(1) -USBWakeUp_IRQHandler - B USBWakeUp_IRQHandler - - PUBWEAK TIM8_BRK_TIM12_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_BRK_TIM12_IRQHandler - B TIM8_BRK_TIM12_IRQHandler - - PUBWEAK TIM8_UP_TIM13_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_UP_TIM13_IRQHandler - B TIM8_UP_TIM13_IRQHandler - - PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_TRG_COM_TIM14_IRQHandler - B TIM8_TRG_COM_TIM14_IRQHandler - - PUBWEAK TIM8_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_CC_IRQHandler - B TIM8_CC_IRQHandler - - PUBWEAK ADC3_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC3_IRQHandler - B ADC3_IRQHandler - - PUBWEAK FSMC_IRQHandler - SECTION .text:CODE:REORDER(1) -FSMC_IRQHandler - B FSMC_IRQHandler - - PUBWEAK SDIO_IRQHandler - SECTION .text:CODE:REORDER(1) -SDIO_IRQHandler - B SDIO_IRQHandler - - PUBWEAK TIM5_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM5_IRQHandler - B TIM5_IRQHandler - - PUBWEAK SPI3_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI3_IRQHandler - B SPI3_IRQHandler - - PUBWEAK UART4_IRQHandler - SECTION .text:CODE:REORDER(1) -UART4_IRQHandler - B UART4_IRQHandler - - PUBWEAK UART5_IRQHandler - SECTION .text:CODE:REORDER(1) -UART5_IRQHandler - B UART5_IRQHandler - - PUBWEAK TIM6_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM6_IRQHandler - B TIM6_IRQHandler - - PUBWEAK TIM7_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM7_IRQHandler - B TIM7_IRQHandler - - PUBWEAK DMA2_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel1_IRQHandler - B DMA2_Channel1_IRQHandler - - PUBWEAK DMA2_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel2_IRQHandler - B DMA2_Channel2_IRQHandler - - PUBWEAK DMA2_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel3_IRQHandler - B DMA2_Channel3_IRQHandler - - PUBWEAK DMA2_Channel4_5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel4_5_IRQHandler - B DMA2_Channel4_5_IRQHandler - - - END - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h deleted file mode 100644 index 8bf7624..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h +++ /dev/null @@ -1,8336 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. - * This file contains all the peripheral register's definitions, bits - * definitions and memory mapping for STM32F10x Connectivity line, - * High density, High density value line, Medium density, - * Medium density Value line, Low density, Low density Value line - * and XL-density devices. - * - * The file is the unique include file that the application programmer - * is using in the C source code, usually in main.c. This file contains: - * - Configuration section that allows to select: - * - The device used in the target application - * - To use or not the peripheral’s drivers in application code(i.e. - * code will be based on direct access to peripheral’s registers - * rather than drivers API), this option is controlled by - * "#define USE_STDPERIPH_DRIVER" - * - To change few application-specific parameters such as the HSE - * crystal frequency - * - Data structures and the address mapping for all peripherals - * - Peripheral's registers declarations and bits definition - * - Macros to access peripheral’s registers hardware - * - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f10x - * @{ - */ - -#ifndef __STM32F10x_H -#define __STM32F10x_H - -#ifdef __cplusplus - extern "C" { -#endif - -/** @addtogroup Library_configuration_section - * @{ - */ - -/* Uncomment the line below according to the target STM32 device used in your - application - */ - -#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) - /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */ - /* #define STM32F10X_LD_VL */ /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */ - /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */ - /* #define STM32F10X_MD_VL */ /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */ - /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */ - /* #define STM32F10X_HD_VL */ /*!< STM32F10X_HD_VL: STM32 High density value line devices */ - /* #define STM32F10X_XL */ /*!< STM32F10X_XL: STM32 XL-density devices */ - /* #define STM32F10X_CL */ /*!< STM32F10X_CL: STM32 Connectivity line devices */ -#endif -/* Tip: To avoid modifying this file each time you need to switch between these - devices, you can define the device in your toolchain compiler preprocessor. - - - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers - where the Flash memory density ranges between 16 and 32 Kbytes. - - Low-density value line devices are STM32F100xx microcontrollers where the Flash - memory density ranges between 16 and 32 Kbytes. - - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers - where the Flash memory density ranges between 64 and 128 Kbytes. - - Medium-density value line devices are STM32F100xx microcontrollers where the - Flash memory density ranges between 64 and 128 Kbytes. - - High-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - High-density value line devices are STM32F100xx microcontrollers where the - Flash memory density ranges between 256 and 512 Kbytes. - - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 512 and 1024 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - */ - -#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) - #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)" -#endif - -#if !defined USE_STDPERIPH_DRIVER -/** - * @brief Comment the line below if you will not use the peripherals drivers. - In this case, these drivers will not be included and the application code will - be based on direct access to peripherals registers - */ - /*#define USE_STDPERIPH_DRIVER*/ -#endif - -/** - * @brief In the following line adjust the value of External High Speed oscillator (HSE) - used in your application - - Tip: To avoid modifying this file each time you need to use different HSE, you - can define the HSE value in your toolchain compiler preprocessor. - */ -#if !defined HSE_VALUE - #ifdef STM32F10X_CL - #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ - #else - #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ - #endif /* STM32F10X_CL */ -#endif /* HSE_VALUE */ - - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - Timeout value - */ -#define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */ - -#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ - -/** - * @brief STM32F10x Standard Peripheral Library version number - */ -#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:24] main version */ -#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x05) /*!< [23:16] sub1 version */ -#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ -#define __STM32F10X_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ -#define __STM32F10X_STDPERIPH_VERSION ( (__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\ - |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\ - |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\ - |(__STM32F10X_STDPERIPH_VERSION_RC)) - -/** - * @} - */ - -/** @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M3 Processor and Core Peripherals - */ -#ifdef STM32F10X_XL - #define __MPU_PRESENT 1 /*!< STM32 XL-density devices provide an MPU */ -#else - #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */ -#endif /* STM32F10X_XL */ -#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ -#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ - -/** - * @brief STM32F10x Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -typedef enum IRQn -{ -/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ - NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ - MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ - BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ - SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ - PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ - SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ - -/****** STM32 specific Interrupt Numbers *********************************************************/ - WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ - PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ - TAMPER_IRQn = 2, /*!< Tamper Interrupt */ - RTC_IRQn = 3, /*!< RTC global Interrupt */ - FLASH_IRQn = 4, /*!< FLASH global Interrupt */ - RCC_IRQn = 5, /*!< RCC global Interrupt */ - EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ - EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ - EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ - EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ - EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ - DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ - DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ - DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ - DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ - DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ - DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ - DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ - -#ifdef STM32F10X_LD - ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ -#endif /* STM32F10X_LD */ - -#ifdef STM32F10X_LD_VL - ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ - TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ - TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ - TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ - TIM7_IRQn = 55 /*!< TIM7 Interrupt */ -#endif /* STM32F10X_LD_VL */ - -#ifdef STM32F10X_MD - ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ -#endif /* STM32F10X_MD */ - -#ifdef STM32F10X_MD_VL - ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ - TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ - TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ - TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ - TIM7_IRQn = 55 /*!< TIM7 Interrupt */ -#endif /* STM32F10X_MD_VL */ - -#ifdef STM32F10X_HD - ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ - TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ - TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ - TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ - TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ - ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ - FSMC_IRQn = 48, /*!< FSMC global Interrupt */ - SDIO_IRQn = 49, /*!< SDIO global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ - TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ - DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ - DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ - DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ - DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ -#endif /* STM32F10X_HD */ - -#ifdef STM32F10X_HD_VL - ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ - TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ - TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ - TIM12_IRQn = 43, /*!< TIM12 global Interrupt */ - TIM13_IRQn = 44, /*!< TIM13 global Interrupt */ - TIM14_IRQn = 45, /*!< TIM14 global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ - TIM7_IRQn = 55, /*!< TIM7 Interrupt */ - DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ - DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ - DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ - DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ - DMA2_Channel5_IRQn = 60 /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is - mapped at position 60 only if the MISC_REMAP bit in - the AFIO_MAPR2 register is set) */ -#endif /* STM32F10X_HD_VL */ - -#ifdef STM32F10X_XL - ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break Interrupt and TIM9 global Interrupt */ - TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global Interrupt */ - TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ - TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global Interrupt */ - TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global Interrupt */ - TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ - TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ - ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ - FSMC_IRQn = 48, /*!< FSMC global Interrupt */ - SDIO_IRQn = 49, /*!< SDIO global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ - TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ - DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ - DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ - DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ - DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ -#endif /* STM32F10X_XL */ - -#ifdef STM32F10X_CL - ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ - CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ - TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ - DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ - DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ - DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ - DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ - DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ - ETH_IRQn = 61, /*!< Ethernet global Interrupt */ - ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ - CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ - CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ - CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ - CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ - OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ -#endif /* STM32F10X_CL */ -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm3.h" -#include "system_stm32f10x.h" -#include <stdint.h> - -/** @addtogroup Exported_types - * @{ - */ - -/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ -typedef int32_t s32; -typedef int16_t s16; -typedef int8_t s8; - -typedef const int32_t sc32; /*!< Read Only */ -typedef const int16_t sc16; /*!< Read Only */ -typedef const int8_t sc8; /*!< Read Only */ - -typedef __IO int32_t vs32; -typedef __IO int16_t vs16; -typedef __IO int8_t vs8; - -typedef __I int32_t vsc32; /*!< Read Only */ -typedef __I int16_t vsc16; /*!< Read Only */ -typedef __I int8_t vsc8; /*!< Read Only */ - -typedef uint32_t u32; -typedef uint16_t u16; -typedef uint8_t u8; - -typedef const uint32_t uc32; /*!< Read Only */ -typedef const uint16_t uc16; /*!< Read Only */ -typedef const uint8_t uc8; /*!< Read Only */ - -typedef __IO uint32_t vu32; -typedef __IO uint16_t vu16; -typedef __IO uint8_t vu8; - -typedef __I uint32_t vuc32; /*!< Read Only */ -typedef __I uint16_t vuc16; /*!< Read Only */ -typedef __I uint8_t vuc8; /*!< Read Only */ - -typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; - -typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; -#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) - -typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; - -/*!< STM32F10x Standard Peripheral Library old definitions (maintained for legacy purpose) */ -#define HSEStartUp_TimeOut HSE_STARTUP_TIMEOUT -#define HSE_Value HSE_VALUE -#define HSI_Value HSI_VALUE -/** - * @} - */ - -/** @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog to Digital Converter - */ - -typedef struct -{ - __IO uint32_t SR; - __IO uint32_t CR1; - __IO uint32_t CR2; - __IO uint32_t SMPR1; - __IO uint32_t SMPR2; - __IO uint32_t JOFR1; - __IO uint32_t JOFR2; - __IO uint32_t JOFR3; - __IO uint32_t JOFR4; - __IO uint32_t HTR; - __IO uint32_t LTR; - __IO uint32_t SQR1; - __IO uint32_t SQR2; - __IO uint32_t SQR3; - __IO uint32_t JSQR; - __IO uint32_t JDR1; - __IO uint32_t JDR2; - __IO uint32_t JDR3; - __IO uint32_t JDR4; - __IO uint32_t DR; -} ADC_TypeDef; - -/** - * @brief Backup Registers - */ - -typedef struct -{ - uint32_t RESERVED0; - __IO uint16_t DR1; - uint16_t RESERVED1; - __IO uint16_t DR2; - uint16_t RESERVED2; - __IO uint16_t DR3; - uint16_t RESERVED3; - __IO uint16_t DR4; - uint16_t RESERVED4; - __IO uint16_t DR5; - uint16_t RESERVED5; - __IO uint16_t DR6; - uint16_t RESERVED6; - __IO uint16_t DR7; - uint16_t RESERVED7; - __IO uint16_t DR8; - uint16_t RESERVED8; - __IO uint16_t DR9; - uint16_t RESERVED9; - __IO uint16_t DR10; - uint16_t RESERVED10; - __IO uint16_t RTCCR; - uint16_t RESERVED11; - __IO uint16_t CR; - uint16_t RESERVED12; - __IO uint16_t CSR; - uint16_t RESERVED13[5]; - __IO uint16_t DR11; - uint16_t RESERVED14; - __IO uint16_t DR12; - uint16_t RESERVED15; - __IO uint16_t DR13; - uint16_t RESERVED16; - __IO uint16_t DR14; - uint16_t RESERVED17; - __IO uint16_t DR15; - uint16_t RESERVED18; - __IO uint16_t DR16; - uint16_t RESERVED19; - __IO uint16_t DR17; - uint16_t RESERVED20; - __IO uint16_t DR18; - uint16_t RESERVED21; - __IO uint16_t DR19; - uint16_t RESERVED22; - __IO uint16_t DR20; - uint16_t RESERVED23; - __IO uint16_t DR21; - uint16_t RESERVED24; - __IO uint16_t DR22; - uint16_t RESERVED25; - __IO uint16_t DR23; - uint16_t RESERVED26; - __IO uint16_t DR24; - uint16_t RESERVED27; - __IO uint16_t DR25; - uint16_t RESERVED28; - __IO uint16_t DR26; - uint16_t RESERVED29; - __IO uint16_t DR27; - uint16_t RESERVED30; - __IO uint16_t DR28; - uint16_t RESERVED31; - __IO uint16_t DR29; - uint16_t RESERVED32; - __IO uint16_t DR30; - uint16_t RESERVED33; - __IO uint16_t DR31; - uint16_t RESERVED34; - __IO uint16_t DR32; - uint16_t RESERVED35; - __IO uint16_t DR33; - uint16_t RESERVED36; - __IO uint16_t DR34; - uint16_t RESERVED37; - __IO uint16_t DR35; - uint16_t RESERVED38; - __IO uint16_t DR36; - uint16_t RESERVED39; - __IO uint16_t DR37; - uint16_t RESERVED40; - __IO uint16_t DR38; - uint16_t RESERVED41; - __IO uint16_t DR39; - uint16_t RESERVED42; - __IO uint16_t DR40; - uint16_t RESERVED43; - __IO uint16_t DR41; - uint16_t RESERVED44; - __IO uint16_t DR42; - uint16_t RESERVED45; -} BKP_TypeDef; - -/** - * @brief Controller Area Network TxMailBox - */ - -typedef struct -{ - __IO uint32_t TIR; - __IO uint32_t TDTR; - __IO uint32_t TDLR; - __IO uint32_t TDHR; -} CAN_TxMailBox_TypeDef; - -/** - * @brief Controller Area Network FIFOMailBox - */ - -typedef struct -{ - __IO uint32_t RIR; - __IO uint32_t RDTR; - __IO uint32_t RDLR; - __IO uint32_t RDHR; -} CAN_FIFOMailBox_TypeDef; - -/** - * @brief Controller Area Network FilterRegister - */ - -typedef struct -{ - __IO uint32_t FR1; - __IO uint32_t FR2; -} CAN_FilterRegister_TypeDef; - -/** - * @brief Controller Area Network - */ - -typedef struct -{ - __IO uint32_t MCR; - __IO uint32_t MSR; - __IO uint32_t TSR; - __IO uint32_t RF0R; - __IO uint32_t RF1R; - __IO uint32_t IER; - __IO uint32_t ESR; - __IO uint32_t BTR; - uint32_t RESERVED0[88]; - CAN_TxMailBox_TypeDef sTxMailBox[3]; - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; - uint32_t RESERVED1[12]; - __IO uint32_t FMR; - __IO uint32_t FM1R; - uint32_t RESERVED2; - __IO uint32_t FS1R; - uint32_t RESERVED3; - __IO uint32_t FFA1R; - uint32_t RESERVED4; - __IO uint32_t FA1R; - uint32_t RESERVED5[8]; -#ifndef STM32F10X_CL - CAN_FilterRegister_TypeDef sFilterRegister[14]; -#else - CAN_FilterRegister_TypeDef sFilterRegister[28]; -#endif /* STM32F10X_CL */ -} CAN_TypeDef; - -/** - * @brief Consumer Electronics Control (CEC) - */ -typedef struct -{ - __IO uint32_t CFGR; - __IO uint32_t OAR; - __IO uint32_t PRES; - __IO uint32_t ESR; - __IO uint32_t CSR; - __IO uint32_t TXD; - __IO uint32_t RXD; -} CEC_TypeDef; - -/** - * @brief CRC calculation unit - */ - -typedef struct -{ - __IO uint32_t DR; - __IO uint8_t IDR; - uint8_t RESERVED0; - uint16_t RESERVED1; - __IO uint32_t CR; -} CRC_TypeDef; - -/** - * @brief Digital to Analog Converter - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t SWTRIGR; - __IO uint32_t DHR12R1; - __IO uint32_t DHR12L1; - __IO uint32_t DHR8R1; - __IO uint32_t DHR12R2; - __IO uint32_t DHR12L2; - __IO uint32_t DHR8R2; - __IO uint32_t DHR12RD; - __IO uint32_t DHR12LD; - __IO uint32_t DHR8RD; - __IO uint32_t DOR1; - __IO uint32_t DOR2; -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - __IO uint32_t SR; -#endif -} DAC_TypeDef; - -/** - * @brief Debug MCU - */ - -typedef struct -{ - __IO uint32_t IDCODE; - __IO uint32_t CR; -}DBGMCU_TypeDef; - -/** - * @brief DMA Controller - */ - -typedef struct -{ - __IO uint32_t CCR; - __IO uint32_t CNDTR; - __IO uint32_t CPAR; - __IO uint32_t CMAR; -} DMA_Channel_TypeDef; - -typedef struct -{ - __IO uint32_t ISR; - __IO uint32_t IFCR; -} DMA_TypeDef; - -/** - * @brief Ethernet MAC - */ - -typedef struct -{ - __IO uint32_t MACCR; - __IO uint32_t MACFFR; - __IO uint32_t MACHTHR; - __IO uint32_t MACHTLR; - __IO uint32_t MACMIIAR; - __IO uint32_t MACMIIDR; - __IO uint32_t MACFCR; - __IO uint32_t MACVLANTR; /* 8 */ - uint32_t RESERVED0[2]; - __IO uint32_t MACRWUFFR; /* 11 */ - __IO uint32_t MACPMTCSR; - uint32_t RESERVED1[2]; - __IO uint32_t MACSR; /* 15 */ - __IO uint32_t MACIMR; - __IO uint32_t MACA0HR; - __IO uint32_t MACA0LR; - __IO uint32_t MACA1HR; - __IO uint32_t MACA1LR; - __IO uint32_t MACA2HR; - __IO uint32_t MACA2LR; - __IO uint32_t MACA3HR; - __IO uint32_t MACA3LR; /* 24 */ - uint32_t RESERVED2[40]; - __IO uint32_t MMCCR; /* 65 */ - __IO uint32_t MMCRIR; - __IO uint32_t MMCTIR; - __IO uint32_t MMCRIMR; - __IO uint32_t MMCTIMR; /* 69 */ - uint32_t RESERVED3[14]; - __IO uint32_t MMCTGFSCCR; /* 84 */ - __IO uint32_t MMCTGFMSCCR; - uint32_t RESERVED4[5]; - __IO uint32_t MMCTGFCR; - uint32_t RESERVED5[10]; - __IO uint32_t MMCRFCECR; - __IO uint32_t MMCRFAECR; - uint32_t RESERVED6[10]; - __IO uint32_t MMCRGUFCR; - uint32_t RESERVED7[334]; - __IO uint32_t PTPTSCR; - __IO uint32_t PTPSSIR; - __IO uint32_t PTPTSHR; - __IO uint32_t PTPTSLR; - __IO uint32_t PTPTSHUR; - __IO uint32_t PTPTSLUR; - __IO uint32_t PTPTSAR; - __IO uint32_t PTPTTHR; - __IO uint32_t PTPTTLR; - uint32_t RESERVED8[567]; - __IO uint32_t DMABMR; - __IO uint32_t DMATPDR; - __IO uint32_t DMARPDR; - __IO uint32_t DMARDLAR; - __IO uint32_t DMATDLAR; - __IO uint32_t DMASR; - __IO uint32_t DMAOMR; - __IO uint32_t DMAIER; - __IO uint32_t DMAMFBOCR; - uint32_t RESERVED9[9]; - __IO uint32_t DMACHTDR; - __IO uint32_t DMACHRDR; - __IO uint32_t DMACHTBAR; - __IO uint32_t DMACHRBAR; -} ETH_TypeDef; - -/** - * @brief External Interrupt/Event Controller - */ - -typedef struct -{ - __IO uint32_t IMR; - __IO uint32_t EMR; - __IO uint32_t RTSR; - __IO uint32_t FTSR; - __IO uint32_t SWIER; - __IO uint32_t PR; -} EXTI_TypeDef; - -/** - * @brief FLASH Registers - */ - -typedef struct -{ - __IO uint32_t ACR; - __IO uint32_t KEYR; - __IO uint32_t OPTKEYR; - __IO uint32_t SR; - __IO uint32_t CR; - __IO uint32_t AR; - __IO uint32_t RESERVED; - __IO uint32_t OBR; - __IO uint32_t WRPR; -#ifdef STM32F10X_XL - uint32_t RESERVED1[8]; - __IO uint32_t KEYR2; - uint32_t RESERVED2; - __IO uint32_t SR2; - __IO uint32_t CR2; - __IO uint32_t AR2; -#endif /* STM32F10X_XL */ -} FLASH_TypeDef; - -/** - * @brief Option Bytes Registers - */ - -typedef struct -{ - __IO uint16_t RDP; - __IO uint16_t USER; - __IO uint16_t Data0; - __IO uint16_t Data1; - __IO uint16_t WRP0; - __IO uint16_t WRP1; - __IO uint16_t WRP2; - __IO uint16_t WRP3; -} OB_TypeDef; - -/** - * @brief Flexible Static Memory Controller - */ - -typedef struct -{ - __IO uint32_t BTCR[8]; -} FSMC_Bank1_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank1E - */ - -typedef struct -{ - __IO uint32_t BWTR[7]; -} FSMC_Bank1E_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank2 - */ - -typedef struct -{ - __IO uint32_t PCR2; - __IO uint32_t SR2; - __IO uint32_t PMEM2; - __IO uint32_t PATT2; - uint32_t RESERVED0; - __IO uint32_t ECCR2; -} FSMC_Bank2_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank3 - */ - -typedef struct -{ - __IO uint32_t PCR3; - __IO uint32_t SR3; - __IO uint32_t PMEM3; - __IO uint32_t PATT3; - uint32_t RESERVED0; - __IO uint32_t ECCR3; -} FSMC_Bank3_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank4 - */ - -typedef struct -{ - __IO uint32_t PCR4; - __IO uint32_t SR4; - __IO uint32_t PMEM4; - __IO uint32_t PATT4; - __IO uint32_t PIO4; -} FSMC_Bank4_TypeDef; - -/** - * @brief General Purpose I/O - */ - -typedef struct -{ - __IO uint32_t CRL; - __IO uint32_t CRH; - __IO uint32_t IDR; - __IO uint32_t ODR; - __IO uint32_t BSRR; - __IO uint32_t BRR; - __IO uint32_t LCKR; -} GPIO_TypeDef; - -/** - * @brief Alternate Function I/O - */ - -typedef struct -{ - __IO uint32_t EVCR; - __IO uint32_t MAPR; - __IO uint32_t EXTICR[4]; - uint32_t RESERVED0; - __IO uint32_t MAPR2; -} AFIO_TypeDef; -/** - * @brief Inter Integrated Circuit Interface - */ - -typedef struct -{ - __IO uint16_t CR1; - uint16_t RESERVED0; - __IO uint16_t CR2; - uint16_t RESERVED1; - __IO uint16_t OAR1; - uint16_t RESERVED2; - __IO uint16_t OAR2; - uint16_t RESERVED3; - __IO uint16_t DR; - uint16_t RESERVED4; - __IO uint16_t SR1; - uint16_t RESERVED5; - __IO uint16_t SR2; - uint16_t RESERVED6; - __IO uint16_t CCR; - uint16_t RESERVED7; - __IO uint16_t TRISE; - uint16_t RESERVED8; -} I2C_TypeDef; - -/** - * @brief Independent WATCHDOG - */ - -typedef struct -{ - __IO uint32_t KR; - __IO uint32_t PR; - __IO uint32_t RLR; - __IO uint32_t SR; -} IWDG_TypeDef; - -/** - * @brief Power Control - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CSR; -} PWR_TypeDef; - -/** - * @brief Reset and Clock Control - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CFGR; - __IO uint32_t CIR; - __IO uint32_t APB2RSTR; - __IO uint32_t APB1RSTR; - __IO uint32_t AHBENR; - __IO uint32_t APB2ENR; - __IO uint32_t APB1ENR; - __IO uint32_t BDCR; - __IO uint32_t CSR; - -#ifdef STM32F10X_CL - __IO uint32_t AHBRSTR; - __IO uint32_t CFGR2; -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - uint32_t RESERVED0; - __IO uint32_t CFGR2; -#endif /* STM32F10X_LD_VL || STM32F10X_MD_VL || STM32F10X_HD_VL */ -} RCC_TypeDef; - -/** - * @brief Real-Time Clock - */ - -typedef struct -{ - __IO uint16_t CRH; - uint16_t RESERVED0; - __IO uint16_t CRL; - uint16_t RESERVED1; - __IO uint16_t PRLH; - uint16_t RESERVED2; - __IO uint16_t PRLL; - uint16_t RESERVED3; - __IO uint16_t DIVH; - uint16_t RESERVED4; - __IO uint16_t DIVL; - uint16_t RESERVED5; - __IO uint16_t CNTH; - uint16_t RESERVED6; - __IO uint16_t CNTL; - uint16_t RESERVED7; - __IO uint16_t ALRH; - uint16_t RESERVED8; - __IO uint16_t ALRL; - uint16_t RESERVED9; -} RTC_TypeDef; - -/** - * @brief SD host Interface - */ - -typedef struct -{ - __IO uint32_t POWER; - __IO uint32_t CLKCR; - __IO uint32_t ARG; - __IO uint32_t CMD; - __I uint32_t RESPCMD; - __I uint32_t RESP1; - __I uint32_t RESP2; - __I uint32_t RESP3; - __I uint32_t RESP4; - __IO uint32_t DTIMER; - __IO uint32_t DLEN; - __IO uint32_t DCTRL; - __I uint32_t DCOUNT; - __I uint32_t STA; - __IO uint32_t ICR; - __IO uint32_t MASK; - uint32_t RESERVED0[2]; - __I uint32_t FIFOCNT; - uint32_t RESERVED1[13]; - __IO uint32_t FIFO; -} SDIO_TypeDef; - -/** - * @brief Serial Peripheral Interface - */ - -typedef struct -{ - __IO uint16_t CR1; - uint16_t RESERVED0; - __IO uint16_t CR2; - uint16_t RESERVED1; - __IO uint16_t SR; - uint16_t RESERVED2; - __IO uint16_t DR; - uint16_t RESERVED3; - __IO uint16_t CRCPR; - uint16_t RESERVED4; - __IO uint16_t RXCRCR; - uint16_t RESERVED5; - __IO uint16_t TXCRCR; - uint16_t RESERVED6; - __IO uint16_t I2SCFGR; - uint16_t RESERVED7; - __IO uint16_t I2SPR; - uint16_t RESERVED8; -} SPI_TypeDef; - -/** - * @brief TIM - */ - -typedef struct -{ - __IO uint16_t CR1; - uint16_t RESERVED0; - __IO uint16_t CR2; - uint16_t RESERVED1; - __IO uint16_t SMCR; - uint16_t RESERVED2; - __IO uint16_t DIER; - uint16_t RESERVED3; - __IO uint16_t SR; - uint16_t RESERVED4; - __IO uint16_t EGR; - uint16_t RESERVED5; - __IO uint16_t CCMR1; - uint16_t RESERVED6; - __IO uint16_t CCMR2; - uint16_t RESERVED7; - __IO uint16_t CCER; - uint16_t RESERVED8; - __IO uint16_t CNT; - uint16_t RESERVED9; - __IO uint16_t PSC; - uint16_t RESERVED10; - __IO uint16_t ARR; - uint16_t RESERVED11; - __IO uint16_t RCR; - uint16_t RESERVED12; - __IO uint16_t CCR1; - uint16_t RESERVED13; - __IO uint16_t CCR2; - uint16_t RESERVED14; - __IO uint16_t CCR3; - uint16_t RESERVED15; - __IO uint16_t CCR4; - uint16_t RESERVED16; - __IO uint16_t BDTR; - uint16_t RESERVED17; - __IO uint16_t DCR; - uint16_t RESERVED18; - __IO uint16_t DMAR; - uint16_t RESERVED19; -} TIM_TypeDef; - -/** - * @brief Universal Synchronous Asynchronous Receiver Transmitter - */ - -typedef struct -{ - __IO uint16_t SR; - uint16_t RESERVED0; - __IO uint16_t DR; - uint16_t RESERVED1; - __IO uint16_t BRR; - uint16_t RESERVED2; - __IO uint16_t CR1; - uint16_t RESERVED3; - __IO uint16_t CR2; - uint16_t RESERVED4; - __IO uint16_t CR3; - uint16_t RESERVED5; - __IO uint16_t GTPR; - uint16_t RESERVED6; -} USART_TypeDef; - -/** - * @brief Window WATCHDOG - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CFR; - __IO uint32_t SR; -} WWDG_TypeDef; - -/** - * @} - */ - -/** @addtogroup Peripheral_memory_map - * @{ - */ - - -#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ -#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */ -#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ - -#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */ -#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ - -#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ - -/*!< Peripheral memory map */ -#define APB1PERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) -#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) - -#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) -#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) -#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) -#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) -#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) -#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) -#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) -#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) -#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) -#define RTC_BASE (APB1PERIPH_BASE + 0x2800) -#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) -#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) -#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) -#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) -#define USART2_BASE (APB1PERIPH_BASE + 0x4400) -#define USART3_BASE (APB1PERIPH_BASE + 0x4800) -#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) -#define UART5_BASE (APB1PERIPH_BASE + 0x5000) -#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) -#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) -#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) -#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) -#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) -#define PWR_BASE (APB1PERIPH_BASE + 0x7000) -#define DAC_BASE (APB1PERIPH_BASE + 0x7400) -#define CEC_BASE (APB1PERIPH_BASE + 0x7800) - -#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) -#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) -#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) -#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) -#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) -#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) -#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) -#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) -#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) -#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) -#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) -#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) -#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) -#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) -#define USART1_BASE (APB2PERIPH_BASE + 0x3800) -#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) -#define TIM15_BASE (APB2PERIPH_BASE + 0x4000) -#define TIM16_BASE (APB2PERIPH_BASE + 0x4400) -#define TIM17_BASE (APB2PERIPH_BASE + 0x4800) -#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00) -#define TIM10_BASE (APB2PERIPH_BASE + 0x5000) -#define TIM11_BASE (APB2PERIPH_BASE + 0x5400) - -#define SDIO_BASE (PERIPH_BASE + 0x18000) - -#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) -#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) -#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) -#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) -#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) -#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) -#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) -#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) -#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) -#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) -#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) -#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) -#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) -#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) -#define RCC_BASE (AHBPERIPH_BASE + 0x1000) -#define CRC_BASE (AHBPERIPH_BASE + 0x3000) - -#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */ -#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */ - -#define ETH_BASE (AHBPERIPH_BASE + 0x8000) -#define ETH_MAC_BASE (ETH_BASE) -#define ETH_MMC_BASE (ETH_BASE + 0x0100) -#define ETH_PTP_BASE (ETH_BASE + 0x0700) -#define ETH_DMA_BASE (ETH_BASE + 0x1000) - -#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */ -#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */ -#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */ -#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */ -#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */ - -#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ - -/** - * @} - */ - -/** @addtogroup Peripheral_declaration - * @{ - */ - -#define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#define TIM3 ((TIM_TypeDef *) TIM3_BASE) -#define TIM4 ((TIM_TypeDef *) TIM4_BASE) -#define TIM5 ((TIM_TypeDef *) TIM5_BASE) -#define TIM6 ((TIM_TypeDef *) TIM6_BASE) -#define TIM7 ((TIM_TypeDef *) TIM7_BASE) -#define TIM12 ((TIM_TypeDef *) TIM12_BASE) -#define TIM13 ((TIM_TypeDef *) TIM13_BASE) -#define TIM14 ((TIM_TypeDef *) TIM14_BASE) -#define RTC ((RTC_TypeDef *) RTC_BASE) -#define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#define SPI2 ((SPI_TypeDef *) SPI2_BASE) -#define SPI3 ((SPI_TypeDef *) SPI3_BASE) -#define USART2 ((USART_TypeDef *) USART2_BASE) -#define USART3 ((USART_TypeDef *) USART3_BASE) -#define UART4 ((USART_TypeDef *) UART4_BASE) -#define UART5 ((USART_TypeDef *) UART5_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -#define CAN2 ((CAN_TypeDef *) CAN2_BASE) -#define BKP ((BKP_TypeDef *) BKP_BASE) -#define PWR ((PWR_TypeDef *) PWR_BASE) -#define DAC ((DAC_TypeDef *) DAC_BASE) -#define CEC ((CEC_TypeDef *) CEC_BASE) -#define AFIO ((AFIO_TypeDef *) AFIO_BASE) -#define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#define ADC2 ((ADC_TypeDef *) ADC2_BASE) -#define TIM1 ((TIM_TypeDef *) TIM1_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define TIM8 ((TIM_TypeDef *) TIM8_BASE) -#define USART1 ((USART_TypeDef *) USART1_BASE) -#define ADC3 ((ADC_TypeDef *) ADC3_BASE) -#define TIM15 ((TIM_TypeDef *) TIM15_BASE) -#define TIM16 ((TIM_TypeDef *) TIM16_BASE) -#define TIM17 ((TIM_TypeDef *) TIM17_BASE) -#define TIM9 ((TIM_TypeDef *) TIM9_BASE) -#define TIM10 ((TIM_TypeDef *) TIM10_BASE) -#define TIM11 ((TIM_TypeDef *) TIM11_BASE) -#define SDIO ((SDIO_TypeDef *) SDIO_BASE) -#define DMA1 ((DMA_TypeDef *) DMA1_BASE) -#define DMA2 ((DMA_TypeDef *) DMA2_BASE) -#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) -#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) -#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) -#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) -#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) -#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) -#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) -#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) -#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) -#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) -#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) -#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) -#define RCC ((RCC_TypeDef *) RCC_BASE) -#define CRC ((CRC_TypeDef *) CRC_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) -#define OB ((OB_TypeDef *) OB_BASE) -#define ETH ((ETH_TypeDef *) ETH_BASE) -#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) -#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) -#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) -#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) -#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) -#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) - -/** - * @} - */ - -/** @addtogroup Exported_constants - * @{ - */ - - /** @addtogroup Peripheral_Registers_Bits_Definition - * @{ - */ - -/******************************************************************************/ -/* Peripheral Registers_Bits_Definition */ -/******************************************************************************/ - -/******************************************************************************/ -/* */ -/* CRC calculation unit */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for CRC_DR register *********************/ -#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ - - -/******************* Bit definition for CRC_IDR register ********************/ -#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */ - - -/******************** Bit definition for CRC_CR register ********************/ -#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */ - -/******************************************************************************/ -/* */ -/* Power Control */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for PWR_CR register ********************/ -#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */ -#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */ -#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */ -#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */ -#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */ - -#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */ -#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */ -#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */ -#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */ - -/*!< PVD level configuration */ -#define PWR_CR_PLS_2V2 ((uint16_t)0x0000) /*!< PVD level 2.2V */ -#define PWR_CR_PLS_2V3 ((uint16_t)0x0020) /*!< PVD level 2.3V */ -#define PWR_CR_PLS_2V4 ((uint16_t)0x0040) /*!< PVD level 2.4V */ -#define PWR_CR_PLS_2V5 ((uint16_t)0x0060) /*!< PVD level 2.5V */ -#define PWR_CR_PLS_2V6 ((uint16_t)0x0080) /*!< PVD level 2.6V */ -#define PWR_CR_PLS_2V7 ((uint16_t)0x00A0) /*!< PVD level 2.7V */ -#define PWR_CR_PLS_2V8 ((uint16_t)0x00C0) /*!< PVD level 2.8V */ -#define PWR_CR_PLS_2V9 ((uint16_t)0x00E0) /*!< PVD level 2.9V */ - -#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */ - - -/******************* Bit definition for PWR_CSR register ********************/ -#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */ -#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */ -#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */ -#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */ - -/******************************************************************************/ -/* */ -/* Backup registers */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for BKP_DR1 register ********************/ -#define BKP_DR1_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR2 register ********************/ -#define BKP_DR2_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR3 register ********************/ -#define BKP_DR3_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR4 register ********************/ -#define BKP_DR4_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR5 register ********************/ -#define BKP_DR5_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR6 register ********************/ -#define BKP_DR6_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR7 register ********************/ -#define BKP_DR7_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR8 register ********************/ -#define BKP_DR8_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR9 register ********************/ -#define BKP_DR9_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR10 register *******************/ -#define BKP_DR10_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR11 register *******************/ -#define BKP_DR11_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR12 register *******************/ -#define BKP_DR12_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR13 register *******************/ -#define BKP_DR13_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR14 register *******************/ -#define BKP_DR14_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR15 register *******************/ -#define BKP_DR15_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR16 register *******************/ -#define BKP_DR16_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR17 register *******************/ -#define BKP_DR17_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/****************** Bit definition for BKP_DR18 register ********************/ -#define BKP_DR18_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR19 register *******************/ -#define BKP_DR19_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR20 register *******************/ -#define BKP_DR20_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR21 register *******************/ -#define BKP_DR21_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR22 register *******************/ -#define BKP_DR22_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR23 register *******************/ -#define BKP_DR23_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR24 register *******************/ -#define BKP_DR24_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR25 register *******************/ -#define BKP_DR25_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR26 register *******************/ -#define BKP_DR26_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR27 register *******************/ -#define BKP_DR27_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR28 register *******************/ -#define BKP_DR28_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR29 register *******************/ -#define BKP_DR29_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR30 register *******************/ -#define BKP_DR30_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR31 register *******************/ -#define BKP_DR31_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR32 register *******************/ -#define BKP_DR32_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR33 register *******************/ -#define BKP_DR33_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR34 register *******************/ -#define BKP_DR34_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR35 register *******************/ -#define BKP_DR35_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR36 register *******************/ -#define BKP_DR36_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR37 register *******************/ -#define BKP_DR37_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR38 register *******************/ -#define BKP_DR38_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR39 register *******************/ -#define BKP_DR39_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR40 register *******************/ -#define BKP_DR40_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR41 register *******************/ -#define BKP_DR41_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR42 register *******************/ -#define BKP_DR42_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/****************** Bit definition for BKP_RTCCR register *******************/ -#define BKP_RTCCR_CAL ((uint16_t)0x007F) /*!< Calibration value */ -#define BKP_RTCCR_CCO ((uint16_t)0x0080) /*!< Calibration Clock Output */ -#define BKP_RTCCR_ASOE ((uint16_t)0x0100) /*!< Alarm or Second Output Enable */ -#define BKP_RTCCR_ASOS ((uint16_t)0x0200) /*!< Alarm or Second Output Selection */ - -/******************** Bit definition for BKP_CR register ********************/ -#define BKP_CR_TPE ((uint8_t)0x01) /*!< TAMPER pin enable */ -#define BKP_CR_TPAL ((uint8_t)0x02) /*!< TAMPER pin active level */ - -/******************* Bit definition for BKP_CSR register ********************/ -#define BKP_CSR_CTE ((uint16_t)0x0001) /*!< Clear Tamper event */ -#define BKP_CSR_CTI ((uint16_t)0x0002) /*!< Clear Tamper Interrupt */ -#define BKP_CSR_TPIE ((uint16_t)0x0004) /*!< TAMPER Pin interrupt enable */ -#define BKP_CSR_TEF ((uint16_t)0x0100) /*!< Tamper Event Flag */ -#define BKP_CSR_TIF ((uint16_t)0x0200) /*!< Tamper Interrupt Flag */ - -/******************************************************************************/ -/* */ -/* Reset and Clock Control */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for RCC_CR register ********************/ -#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */ -#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */ -#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */ -#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */ -#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */ -#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */ -#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */ -#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */ -#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */ -#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */ - -#ifdef STM32F10X_CL - #define RCC_CR_PLL2ON ((uint32_t)0x04000000) /*!< PLL2 enable */ - #define RCC_CR_PLL2RDY ((uint32_t)0x08000000) /*!< PLL2 clock ready flag */ - #define RCC_CR_PLL3ON ((uint32_t)0x10000000) /*!< PLL3 enable */ - #define RCC_CR_PLL3RDY ((uint32_t)0x20000000) /*!< PLL3 clock ready flag */ -#endif /* STM32F10X_CL */ - -/******************* Bit definition for RCC_CFGR register *******************/ -/*!< SW configuration */ -#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */ -#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - -#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */ -#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */ -#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */ - -/*!< SWS configuration */ -#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */ -#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */ -#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */ -#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */ - -/*!< HPRE configuration */ -#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */ -#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ -#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ -#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ -#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ -#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ -#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ -#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ -#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ -#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ - -/*!< PPRE1 configuration */ -#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */ -#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ - -#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ -#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ -#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ -#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ -#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ - -/*!< PPRE2 configuration */ -#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */ -#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */ -#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */ -#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */ - -#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ -#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ -#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ -#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ -#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ - -/*!< ADCPPRE configuration */ -#define RCC_CFGR_ADCPRE ((uint32_t)0x0000C000) /*!< ADCPRE[1:0] bits (ADC prescaler) */ -#define RCC_CFGR_ADCPRE_0 ((uint32_t)0x00004000) /*!< Bit 0 */ -#define RCC_CFGR_ADCPRE_1 ((uint32_t)0x00008000) /*!< Bit 1 */ - -#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */ -#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */ -#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */ -#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */ - -#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */ - -#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */ - -/*!< PLLMUL configuration */ -#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ -#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ -#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ -#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */ - -#ifdef STM32F10X_CL - #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ - #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ - - #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ - #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ - - #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock * 4 */ - #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock * 5 */ - #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock * 6 */ - #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock * 7 */ - #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock * 8 */ - #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock * 9 */ - #define RCC_CFGR_PLLMULL6_5 ((uint32_t)0x00340000) /*!< PLL input clock * 6.5 */ - - #define RCC_CFGR_OTGFSPRE ((uint32_t)0x00400000) /*!< USB OTG FS prescaler */ - -/*!< MCO configuration */ - #define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */ - #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ - #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - #define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - - #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ - #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ - #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ - #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ - #define RCC_CFGR_MCO_PLLCLK_Div2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ - #define RCC_CFGR_MCO_PLL2CLK ((uint32_t)0x08000000) /*!< PLL2 clock selected as MCO source*/ - #define RCC_CFGR_MCO_PLL3CLK_Div2 ((uint32_t)0x09000000) /*!< PLL3 clock divided by 2 selected as MCO source*/ - #define RCC_CFGR_MCO_Ext_HSE ((uint32_t)0x0A000000) /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ - #define RCC_CFGR_MCO_PLL3CLK ((uint32_t)0x0B000000) /*!< PLL3 clock selected as MCO source */ -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ - #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ - - #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ - #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ - - #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ - #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ - #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ - #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ - #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ - #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ - #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ - #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ - #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ - #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ - #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ - #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ - #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ - #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ - #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ - -/*!< MCO configuration */ - #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ - #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ - #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - - #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ - #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ - #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ - #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ - #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ -#else - #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ - #define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE clock selected as PLL entry clock source */ - - #define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */ - #define RCC_CFGR_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */ - - #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ - #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ - #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ - #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ - #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ - #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ - #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ - #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ - #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ - #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ - #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ - #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ - #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ - #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ - #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ - #define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB Device prescaler */ - -/*!< MCO configuration */ - #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ - #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ - #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - - #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ - #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ - #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ - #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ - #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ -#endif /* STM32F10X_CL */ - -/*!<****************** Bit definition for RCC_CIR register ********************/ -#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */ -#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */ -#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */ -#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */ -#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */ -#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */ -#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */ -#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */ -#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */ -#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */ -#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */ -#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */ -#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */ -#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */ -#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */ -#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */ -#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */ - -#ifdef STM32F10X_CL - #define RCC_CIR_PLL2RDYF ((uint32_t)0x00000020) /*!< PLL2 Ready Interrupt flag */ - #define RCC_CIR_PLL3RDYF ((uint32_t)0x00000040) /*!< PLL3 Ready Interrupt flag */ - #define RCC_CIR_PLL2RDYIE ((uint32_t)0x00002000) /*!< PLL2 Ready Interrupt Enable */ - #define RCC_CIR_PLL3RDYIE ((uint32_t)0x00004000) /*!< PLL3 Ready Interrupt Enable */ - #define RCC_CIR_PLL2RDYC ((uint32_t)0x00200000) /*!< PLL2 Ready Interrupt Clear */ - #define RCC_CIR_PLL3RDYC ((uint32_t)0x00400000) /*!< PLL3 Ready Interrupt Clear */ -#endif /* STM32F10X_CL */ - -/***************** Bit definition for RCC_APB2RSTR register *****************/ -#define RCC_APB2RSTR_AFIORST ((uint32_t)0x00000001) /*!< Alternate Function I/O reset */ -#define RCC_APB2RSTR_IOPARST ((uint32_t)0x00000004) /*!< I/O port A reset */ -#define RCC_APB2RSTR_IOPBRST ((uint32_t)0x00000008) /*!< I/O port B reset */ -#define RCC_APB2RSTR_IOPCRST ((uint32_t)0x00000010) /*!< I/O port C reset */ -#define RCC_APB2RSTR_IOPDRST ((uint32_t)0x00000020) /*!< I/O port D reset */ -#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC 1 interface reset */ - -#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) -#define RCC_APB2RSTR_ADC2RST ((uint32_t)0x00000400) /*!< ADC 2 interface reset */ -#endif - -#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 Timer reset */ -#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI 1 reset */ -#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */ - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) -#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 Timer reset */ -#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 Timer reset */ -#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 Timer reset */ -#endif - -#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) - #define RCC_APB2RSTR_IOPERST ((uint32_t)0x00000040) /*!< I/O port E reset */ -#endif /* STM32F10X_LD && STM32F10X_LD_VL */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_XL) - #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ - #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ - #define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00002000) /*!< TIM8 Timer reset */ - #define RCC_APB2RSTR_ADC3RST ((uint32_t)0x00008000) /*!< ADC3 interface reset */ -#endif - -#if defined (STM32F10X_HD_VL) - #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ - #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ -#endif - -#ifdef STM32F10X_XL - #define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00080000) /*!< TIM9 Timer reset */ - #define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00100000) /*!< TIM10 Timer reset */ - #define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00200000) /*!< TIM11 Timer reset */ -#endif /* STM32F10X_XL */ - -/***************** Bit definition for RCC_APB1RSTR register *****************/ -#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */ -#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */ -#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */ -#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */ -#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */ - -#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) -#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN1 reset */ -#endif - -#define RCC_APB1RSTR_BKPRST ((uint32_t)0x08000000) /*!< Backup interface reset */ -#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */ - -#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) - #define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */ - #define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */ - #define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */ - #define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */ -#endif /* STM32F10X_LD && STM32F10X_LD_VL */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) || defined (STM32F10X_XL) - #define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB Device reset */ -#endif - -#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_XL) - #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ - #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ - #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ - #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ - #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ - #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ - #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ -#endif - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ - #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ - #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ - #define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC interface reset */ -#endif - -#if defined (STM32F10X_HD_VL) - #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ - #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ - #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ - #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ - #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ - #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ - #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ -#endif - -#ifdef STM32F10X_CL - #define RCC_APB1RSTR_CAN2RST ((uint32_t)0x04000000) /*!< CAN2 reset */ -#endif /* STM32F10X_CL */ - -#ifdef STM32F10X_XL - #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ - #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ - #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ -#endif /* STM32F10X_XL */ - -/****************** Bit definition for RCC_AHBENR register ******************/ -#define RCC_AHBENR_DMA1EN ((uint16_t)0x0001) /*!< DMA1 clock enable */ -#define RCC_AHBENR_SRAMEN ((uint16_t)0x0004) /*!< SRAM interface clock enable */ -#define RCC_AHBENR_FLITFEN ((uint16_t)0x0010) /*!< FLITF clock enable */ -#define RCC_AHBENR_CRCEN ((uint16_t)0x0040) /*!< CRC clock enable */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_HD_VL) - #define RCC_AHBENR_DMA2EN ((uint16_t)0x0002) /*!< DMA2 clock enable */ -#endif - -#if defined (STM32F10X_HD) || defined (STM32F10X_XL) - #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ - #define RCC_AHBENR_SDIOEN ((uint16_t)0x0400) /*!< SDIO clock enable */ -#endif - -#if defined (STM32F10X_HD_VL) - #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ -#endif - -#ifdef STM32F10X_CL - #define RCC_AHBENR_OTGFSEN ((uint32_t)0x00001000) /*!< USB OTG FS clock enable */ - #define RCC_AHBENR_ETHMACEN ((uint32_t)0x00004000) /*!< ETHERNET MAC clock enable */ - #define RCC_AHBENR_ETHMACTXEN ((uint32_t)0x00008000) /*!< ETHERNET MAC Tx clock enable */ - #define RCC_AHBENR_ETHMACRXEN ((uint32_t)0x00010000) /*!< ETHERNET MAC Rx clock enable */ -#endif /* STM32F10X_CL */ - -/****************** Bit definition for RCC_APB2ENR register *****************/ -#define RCC_APB2ENR_AFIOEN ((uint32_t)0x00000001) /*!< Alternate Function I/O clock enable */ -#define RCC_APB2ENR_IOPAEN ((uint32_t)0x00000004) /*!< I/O port A clock enable */ -#define RCC_APB2ENR_IOPBEN ((uint32_t)0x00000008) /*!< I/O port B clock enable */ -#define RCC_APB2ENR_IOPCEN ((uint32_t)0x00000010) /*!< I/O port C clock enable */ -#define RCC_APB2ENR_IOPDEN ((uint32_t)0x00000020) /*!< I/O port D clock enable */ -#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC 1 interface clock enable */ - -#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) -#define RCC_APB2ENR_ADC2EN ((uint32_t)0x00000400) /*!< ADC 2 interface clock enable */ -#endif - -#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 Timer clock enable */ -#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI 1 clock enable */ -#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */ - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) -#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 Timer clock enable */ -#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 Timer clock enable */ -#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 Timer clock enable */ -#endif - -#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) - #define RCC_APB2ENR_IOPEEN ((uint32_t)0x00000040) /*!< I/O port E clock enable */ -#endif /* STM32F10X_LD && STM32F10X_LD_VL */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_XL) - #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ - #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ - #define RCC_APB2ENR_TIM8EN ((uint32_t)0x00002000) /*!< TIM8 Timer clock enable */ - #define RCC_APB2ENR_ADC3EN ((uint32_t)0x00008000) /*!< DMA1 clock enable */ -#endif - -#if defined (STM32F10X_HD_VL) - #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ - #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ -#endif - -#ifdef STM32F10X_XL - #define RCC_APB2ENR_TIM9EN ((uint32_t)0x00080000) /*!< TIM9 Timer clock enable */ - #define RCC_APB2ENR_TIM10EN ((uint32_t)0x00100000) /*!< TIM10 Timer clock enable */ - #define RCC_APB2ENR_TIM11EN ((uint32_t)0x00200000) /*!< TIM11 Timer clock enable */ -#endif - -/***************** Bit definition for RCC_APB1ENR register ******************/ -#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/ -#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */ -#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */ -#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */ -#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */ - -#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) -#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN1 clock enable */ -#endif - -#define RCC_APB1ENR_BKPEN ((uint32_t)0x08000000) /*!< Backup interface clock enable */ -#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */ - -#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) - #define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */ - #define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */ - #define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */ - #define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */ -#endif /* STM32F10X_LD && STM32F10X_LD_VL */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) - #define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB Device clock enable */ -#endif - -#if defined (STM32F10X_HD) || defined (STM32F10X_CL) - #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ - #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ - #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ - #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ - #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ - #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ - #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ -#endif - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ - #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ - #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ - #define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC interface clock enable */ -#endif - -#ifdef STM32F10X_HD_VL - #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ - #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ - #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ - #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ - #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ - #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ - #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ -#endif /* STM32F10X_HD_VL */ - -#ifdef STM32F10X_CL - #define RCC_APB1ENR_CAN2EN ((uint32_t)0x04000000) /*!< CAN2 clock enable */ -#endif /* STM32F10X_CL */ - -#ifdef STM32F10X_XL - #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ - #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ - #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ -#endif /* STM32F10X_XL */ - -/******************* Bit definition for RCC_BDCR register *******************/ -#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */ -#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */ -#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */ - -#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */ -#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -/*!< RTC congiguration */ -#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ -#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */ -#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */ -#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */ - -#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */ -#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */ - -/******************* Bit definition for RCC_CSR register ********************/ -#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */ -#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */ -#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */ -#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */ -#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */ -#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */ -#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */ -#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */ -#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */ - -#ifdef STM32F10X_CL -/******************* Bit definition for RCC_AHBRSTR register ****************/ - #define RCC_AHBRSTR_OTGFSRST ((uint32_t)0x00001000) /*!< USB OTG FS reset */ - #define RCC_AHBRSTR_ETHMACRST ((uint32_t)0x00004000) /*!< ETHERNET MAC reset */ - -/******************* Bit definition for RCC_CFGR2 register ******************/ -/*!< PREDIV1 configuration */ - #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ - #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ - #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ - #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - - #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ - #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ - #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ - #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ - #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ - #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ - #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ - #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ - #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ - #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ - #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ - #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ - #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ - #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ - #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ - #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ - -/*!< PREDIV2 configuration */ - #define RCC_CFGR2_PREDIV2 ((uint32_t)0x000000F0) /*!< PREDIV2[3:0] bits */ - #define RCC_CFGR2_PREDIV2_0 ((uint32_t)0x00000010) /*!< Bit 0 */ - #define RCC_CFGR2_PREDIV2_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - #define RCC_CFGR2_PREDIV2_2 ((uint32_t)0x00000040) /*!< Bit 2 */ - #define RCC_CFGR2_PREDIV2_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - - #define RCC_CFGR2_PREDIV2_DIV1 ((uint32_t)0x00000000) /*!< PREDIV2 input clock not divided */ - #define RCC_CFGR2_PREDIV2_DIV2 ((uint32_t)0x00000010) /*!< PREDIV2 input clock divided by 2 */ - #define RCC_CFGR2_PREDIV2_DIV3 ((uint32_t)0x00000020) /*!< PREDIV2 input clock divided by 3 */ - #define RCC_CFGR2_PREDIV2_DIV4 ((uint32_t)0x00000030) /*!< PREDIV2 input clock divided by 4 */ - #define RCC_CFGR2_PREDIV2_DIV5 ((uint32_t)0x00000040) /*!< PREDIV2 input clock divided by 5 */ - #define RCC_CFGR2_PREDIV2_DIV6 ((uint32_t)0x00000050) /*!< PREDIV2 input clock divided by 6 */ - #define RCC_CFGR2_PREDIV2_DIV7 ((uint32_t)0x00000060) /*!< PREDIV2 input clock divided by 7 */ - #define RCC_CFGR2_PREDIV2_DIV8 ((uint32_t)0x00000070) /*!< PREDIV2 input clock divided by 8 */ - #define RCC_CFGR2_PREDIV2_DIV9 ((uint32_t)0x00000080) /*!< PREDIV2 input clock divided by 9 */ - #define RCC_CFGR2_PREDIV2_DIV10 ((uint32_t)0x00000090) /*!< PREDIV2 input clock divided by 10 */ - #define RCC_CFGR2_PREDIV2_DIV11 ((uint32_t)0x000000A0) /*!< PREDIV2 input clock divided by 11 */ - #define RCC_CFGR2_PREDIV2_DIV12 ((uint32_t)0x000000B0) /*!< PREDIV2 input clock divided by 12 */ - #define RCC_CFGR2_PREDIV2_DIV13 ((uint32_t)0x000000C0) /*!< PREDIV2 input clock divided by 13 */ - #define RCC_CFGR2_PREDIV2_DIV14 ((uint32_t)0x000000D0) /*!< PREDIV2 input clock divided by 14 */ - #define RCC_CFGR2_PREDIV2_DIV15 ((uint32_t)0x000000E0) /*!< PREDIV2 input clock divided by 15 */ - #define RCC_CFGR2_PREDIV2_DIV16 ((uint32_t)0x000000F0) /*!< PREDIV2 input clock divided by 16 */ - -/*!< PLL2MUL configuration */ - #define RCC_CFGR2_PLL2MUL ((uint32_t)0x00000F00) /*!< PLL2MUL[3:0] bits */ - #define RCC_CFGR2_PLL2MUL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ - #define RCC_CFGR2_PLL2MUL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - #define RCC_CFGR2_PLL2MUL_2 ((uint32_t)0x00000400) /*!< Bit 2 */ - #define RCC_CFGR2_PLL2MUL_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - - #define RCC_CFGR2_PLL2MUL8 ((uint32_t)0x00000600) /*!< PLL2 input clock * 8 */ - #define RCC_CFGR2_PLL2MUL9 ((uint32_t)0x00000700) /*!< PLL2 input clock * 9 */ - #define RCC_CFGR2_PLL2MUL10 ((uint32_t)0x00000800) /*!< PLL2 input clock * 10 */ - #define RCC_CFGR2_PLL2MUL11 ((uint32_t)0x00000900) /*!< PLL2 input clock * 11 */ - #define RCC_CFGR2_PLL2MUL12 ((uint32_t)0x00000A00) /*!< PLL2 input clock * 12 */ - #define RCC_CFGR2_PLL2MUL13 ((uint32_t)0x00000B00) /*!< PLL2 input clock * 13 */ - #define RCC_CFGR2_PLL2MUL14 ((uint32_t)0x00000C00) /*!< PLL2 input clock * 14 */ - #define RCC_CFGR2_PLL2MUL16 ((uint32_t)0x00000E00) /*!< PLL2 input clock * 16 */ - #define RCC_CFGR2_PLL2MUL20 ((uint32_t)0x00000F00) /*!< PLL2 input clock * 20 */ - -/*!< PLL3MUL configuration */ - #define RCC_CFGR2_PLL3MUL ((uint32_t)0x0000F000) /*!< PLL3MUL[3:0] bits */ - #define RCC_CFGR2_PLL3MUL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ - #define RCC_CFGR2_PLL3MUL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ - #define RCC_CFGR2_PLL3MUL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ - #define RCC_CFGR2_PLL3MUL_3 ((uint32_t)0x00008000) /*!< Bit 3 */ - - #define RCC_CFGR2_PLL3MUL8 ((uint32_t)0x00006000) /*!< PLL3 input clock * 8 */ - #define RCC_CFGR2_PLL3MUL9 ((uint32_t)0x00007000) /*!< PLL3 input clock * 9 */ - #define RCC_CFGR2_PLL3MUL10 ((uint32_t)0x00008000) /*!< PLL3 input clock * 10 */ - #define RCC_CFGR2_PLL3MUL11 ((uint32_t)0x00009000) /*!< PLL3 input clock * 11 */ - #define RCC_CFGR2_PLL3MUL12 ((uint32_t)0x0000A000) /*!< PLL3 input clock * 12 */ - #define RCC_CFGR2_PLL3MUL13 ((uint32_t)0x0000B000) /*!< PLL3 input clock * 13 */ - #define RCC_CFGR2_PLL3MUL14 ((uint32_t)0x0000C000) /*!< PLL3 input clock * 14 */ - #define RCC_CFGR2_PLL3MUL16 ((uint32_t)0x0000E000) /*!< PLL3 input clock * 16 */ - #define RCC_CFGR2_PLL3MUL20 ((uint32_t)0x0000F000) /*!< PLL3 input clock * 20 */ - - #define RCC_CFGR2_PREDIV1SRC ((uint32_t)0x00010000) /*!< PREDIV1 entry clock source */ - #define RCC_CFGR2_PREDIV1SRC_PLL2 ((uint32_t)0x00010000) /*!< PLL2 selected as PREDIV1 entry clock source */ - #define RCC_CFGR2_PREDIV1SRC_HSE ((uint32_t)0x00000000) /*!< HSE selected as PREDIV1 entry clock source */ - #define RCC_CFGR2_I2S2SRC ((uint32_t)0x00020000) /*!< I2S2 entry clock source */ - #define RCC_CFGR2_I2S3SRC ((uint32_t)0x00040000) /*!< I2S3 clock source */ -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) -/******************* Bit definition for RCC_CFGR2 register ******************/ -/*!< PREDIV1 configuration */ - #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ - #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ - #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ - #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - - #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ - #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ - #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ - #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ - #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ - #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ - #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ - #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ - #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ - #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ - #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ - #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ - #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ - #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ - #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ - #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ -#endif - -/******************************************************************************/ -/* */ -/* General Purpose and Alternate Function I/O */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for GPIO_CRL register *******************/ -#define GPIO_CRL_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ - -#define GPIO_CRL_MODE0 ((uint32_t)0x00000003) /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ -#define GPIO_CRL_MODE0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define GPIO_CRL_MODE0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - -#define GPIO_CRL_MODE1 ((uint32_t)0x00000030) /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ -#define GPIO_CRL_MODE1_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define GPIO_CRL_MODE1_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define GPIO_CRL_MODE2 ((uint32_t)0x00000300) /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ -#define GPIO_CRL_MODE2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define GPIO_CRL_MODE2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -#define GPIO_CRL_MODE3 ((uint32_t)0x00003000) /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ -#define GPIO_CRL_MODE3_0 ((uint32_t)0x00001000) /*!< Bit 0 */ -#define GPIO_CRL_MODE3_1 ((uint32_t)0x00002000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE4 ((uint32_t)0x00030000) /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ -#define GPIO_CRL_MODE4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define GPIO_CRL_MODE4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE5 ((uint32_t)0x00300000) /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ -#define GPIO_CRL_MODE5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define GPIO_CRL_MODE5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE6 ((uint32_t)0x03000000) /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ -#define GPIO_CRL_MODE6_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define GPIO_CRL_MODE6_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE7 ((uint32_t)0x30000000) /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ -#define GPIO_CRL_MODE7_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define GPIO_CRL_MODE7_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ - -#define GPIO_CRL_CNF0 ((uint32_t)0x0000000C) /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ -#define GPIO_CRL_CNF0_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define GPIO_CRL_CNF0_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define GPIO_CRL_CNF1 ((uint32_t)0x000000C0) /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ -#define GPIO_CRL_CNF1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define GPIO_CRL_CNF1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -#define GPIO_CRL_CNF2 ((uint32_t)0x00000C00) /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ -#define GPIO_CRL_CNF2_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define GPIO_CRL_CNF2_1 ((uint32_t)0x00000800) /*!< Bit 1 */ - -#define GPIO_CRL_CNF3 ((uint32_t)0x0000C000) /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ -#define GPIO_CRL_CNF3_0 ((uint32_t)0x00004000) /*!< Bit 0 */ -#define GPIO_CRL_CNF3_1 ((uint32_t)0x00008000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF4 ((uint32_t)0x000C0000) /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ -#define GPIO_CRL_CNF4_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define GPIO_CRL_CNF4_1 ((uint32_t)0x00080000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF5 ((uint32_t)0x00C00000) /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ -#define GPIO_CRL_CNF5_0 ((uint32_t)0x00400000) /*!< Bit 0 */ -#define GPIO_CRL_CNF5_1 ((uint32_t)0x00800000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF6 ((uint32_t)0x0C000000) /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ -#define GPIO_CRL_CNF6_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define GPIO_CRL_CNF6_1 ((uint32_t)0x08000000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF7 ((uint32_t)0xC0000000) /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ -#define GPIO_CRL_CNF7_0 ((uint32_t)0x40000000) /*!< Bit 0 */ -#define GPIO_CRL_CNF7_1 ((uint32_t)0x80000000) /*!< Bit 1 */ - -/******************* Bit definition for GPIO_CRH register *******************/ -#define GPIO_CRH_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ - -#define GPIO_CRH_MODE8 ((uint32_t)0x00000003) /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ -#define GPIO_CRH_MODE8_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define GPIO_CRH_MODE8_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - -#define GPIO_CRH_MODE9 ((uint32_t)0x00000030) /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ -#define GPIO_CRH_MODE9_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define GPIO_CRH_MODE9_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define GPIO_CRH_MODE10 ((uint32_t)0x00000300) /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ -#define GPIO_CRH_MODE10_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define GPIO_CRH_MODE10_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -#define GPIO_CRH_MODE11 ((uint32_t)0x00003000) /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ -#define GPIO_CRH_MODE11_0 ((uint32_t)0x00001000) /*!< Bit 0 */ -#define GPIO_CRH_MODE11_1 ((uint32_t)0x00002000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE12 ((uint32_t)0x00030000) /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ -#define GPIO_CRH_MODE12_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define GPIO_CRH_MODE12_1 ((uint32_t)0x00020000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE13 ((uint32_t)0x00300000) /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ -#define GPIO_CRH_MODE13_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define GPIO_CRH_MODE13_1 ((uint32_t)0x00200000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE14 ((uint32_t)0x03000000) /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ -#define GPIO_CRH_MODE14_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define GPIO_CRH_MODE14_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE15 ((uint32_t)0x30000000) /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ -#define GPIO_CRH_MODE15_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define GPIO_CRH_MODE15_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ - -#define GPIO_CRH_CNF8 ((uint32_t)0x0000000C) /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ -#define GPIO_CRH_CNF8_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define GPIO_CRH_CNF8_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define GPIO_CRH_CNF9 ((uint32_t)0x000000C0) /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ -#define GPIO_CRH_CNF9_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define GPIO_CRH_CNF9_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -#define GPIO_CRH_CNF10 ((uint32_t)0x00000C00) /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ -#define GPIO_CRH_CNF10_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define GPIO_CRH_CNF10_1 ((uint32_t)0x00000800) /*!< Bit 1 */ - -#define GPIO_CRH_CNF11 ((uint32_t)0x0000C000) /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ -#define GPIO_CRH_CNF11_0 ((uint32_t)0x00004000) /*!< Bit 0 */ -#define GPIO_CRH_CNF11_1 ((uint32_t)0x00008000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF12 ((uint32_t)0x000C0000) /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ -#define GPIO_CRH_CNF12_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define GPIO_CRH_CNF12_1 ((uint32_t)0x00080000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF13 ((uint32_t)0x00C00000) /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ -#define GPIO_CRH_CNF13_0 ((uint32_t)0x00400000) /*!< Bit 0 */ -#define GPIO_CRH_CNF13_1 ((uint32_t)0x00800000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF14 ((uint32_t)0x0C000000) /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ -#define GPIO_CRH_CNF14_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define GPIO_CRH_CNF14_1 ((uint32_t)0x08000000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF15 ((uint32_t)0xC0000000) /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ -#define GPIO_CRH_CNF15_0 ((uint32_t)0x40000000) /*!< Bit 0 */ -#define GPIO_CRH_CNF15_1 ((uint32_t)0x80000000) /*!< Bit 1 */ - -/*!<****************** Bit definition for GPIO_IDR register *******************/ -#define GPIO_IDR_IDR0 ((uint16_t)0x0001) /*!< Port input data, bit 0 */ -#define GPIO_IDR_IDR1 ((uint16_t)0x0002) /*!< Port input data, bit 1 */ -#define GPIO_IDR_IDR2 ((uint16_t)0x0004) /*!< Port input data, bit 2 */ -#define GPIO_IDR_IDR3 ((uint16_t)0x0008) /*!< Port input data, bit 3 */ -#define GPIO_IDR_IDR4 ((uint16_t)0x0010) /*!< Port input data, bit 4 */ -#define GPIO_IDR_IDR5 ((uint16_t)0x0020) /*!< Port input data, bit 5 */ -#define GPIO_IDR_IDR6 ((uint16_t)0x0040) /*!< Port input data, bit 6 */ -#define GPIO_IDR_IDR7 ((uint16_t)0x0080) /*!< Port input data, bit 7 */ -#define GPIO_IDR_IDR8 ((uint16_t)0x0100) /*!< Port input data, bit 8 */ -#define GPIO_IDR_IDR9 ((uint16_t)0x0200) /*!< Port input data, bit 9 */ -#define GPIO_IDR_IDR10 ((uint16_t)0x0400) /*!< Port input data, bit 10 */ -#define GPIO_IDR_IDR11 ((uint16_t)0x0800) /*!< Port input data, bit 11 */ -#define GPIO_IDR_IDR12 ((uint16_t)0x1000) /*!< Port input data, bit 12 */ -#define GPIO_IDR_IDR13 ((uint16_t)0x2000) /*!< Port input data, bit 13 */ -#define GPIO_IDR_IDR14 ((uint16_t)0x4000) /*!< Port input data, bit 14 */ -#define GPIO_IDR_IDR15 ((uint16_t)0x8000) /*!< Port input data, bit 15 */ - -/******************* Bit definition for GPIO_ODR register *******************/ -#define GPIO_ODR_ODR0 ((uint16_t)0x0001) /*!< Port output data, bit 0 */ -#define GPIO_ODR_ODR1 ((uint16_t)0x0002) /*!< Port output data, bit 1 */ -#define GPIO_ODR_ODR2 ((uint16_t)0x0004) /*!< Port output data, bit 2 */ -#define GPIO_ODR_ODR3 ((uint16_t)0x0008) /*!< Port output data, bit 3 */ -#define GPIO_ODR_ODR4 ((uint16_t)0x0010) /*!< Port output data, bit 4 */ -#define GPIO_ODR_ODR5 ((uint16_t)0x0020) /*!< Port output data, bit 5 */ -#define GPIO_ODR_ODR6 ((uint16_t)0x0040) /*!< Port output data, bit 6 */ -#define GPIO_ODR_ODR7 ((uint16_t)0x0080) /*!< Port output data, bit 7 */ -#define GPIO_ODR_ODR8 ((uint16_t)0x0100) /*!< Port output data, bit 8 */ -#define GPIO_ODR_ODR9 ((uint16_t)0x0200) /*!< Port output data, bit 9 */ -#define GPIO_ODR_ODR10 ((uint16_t)0x0400) /*!< Port output data, bit 10 */ -#define GPIO_ODR_ODR11 ((uint16_t)0x0800) /*!< Port output data, bit 11 */ -#define GPIO_ODR_ODR12 ((uint16_t)0x1000) /*!< Port output data, bit 12 */ -#define GPIO_ODR_ODR13 ((uint16_t)0x2000) /*!< Port output data, bit 13 */ -#define GPIO_ODR_ODR14 ((uint16_t)0x4000) /*!< Port output data, bit 14 */ -#define GPIO_ODR_ODR15 ((uint16_t)0x8000) /*!< Port output data, bit 15 */ - -/****************** Bit definition for GPIO_BSRR register *******************/ -#define GPIO_BSRR_BS0 ((uint32_t)0x00000001) /*!< Port x Set bit 0 */ -#define GPIO_BSRR_BS1 ((uint32_t)0x00000002) /*!< Port x Set bit 1 */ -#define GPIO_BSRR_BS2 ((uint32_t)0x00000004) /*!< Port x Set bit 2 */ -#define GPIO_BSRR_BS3 ((uint32_t)0x00000008) /*!< Port x Set bit 3 */ -#define GPIO_BSRR_BS4 ((uint32_t)0x00000010) /*!< Port x Set bit 4 */ -#define GPIO_BSRR_BS5 ((uint32_t)0x00000020) /*!< Port x Set bit 5 */ -#define GPIO_BSRR_BS6 ((uint32_t)0x00000040) /*!< Port x Set bit 6 */ -#define GPIO_BSRR_BS7 ((uint32_t)0x00000080) /*!< Port x Set bit 7 */ -#define GPIO_BSRR_BS8 ((uint32_t)0x00000100) /*!< Port x Set bit 8 */ -#define GPIO_BSRR_BS9 ((uint32_t)0x00000200) /*!< Port x Set bit 9 */ -#define GPIO_BSRR_BS10 ((uint32_t)0x00000400) /*!< Port x Set bit 10 */ -#define GPIO_BSRR_BS11 ((uint32_t)0x00000800) /*!< Port x Set bit 11 */ -#define GPIO_BSRR_BS12 ((uint32_t)0x00001000) /*!< Port x Set bit 12 */ -#define GPIO_BSRR_BS13 ((uint32_t)0x00002000) /*!< Port x Set bit 13 */ -#define GPIO_BSRR_BS14 ((uint32_t)0x00004000) /*!< Port x Set bit 14 */ -#define GPIO_BSRR_BS15 ((uint32_t)0x00008000) /*!< Port x Set bit 15 */ - -#define GPIO_BSRR_BR0 ((uint32_t)0x00010000) /*!< Port x Reset bit 0 */ -#define GPIO_BSRR_BR1 ((uint32_t)0x00020000) /*!< Port x Reset bit 1 */ -#define GPIO_BSRR_BR2 ((uint32_t)0x00040000) /*!< Port x Reset bit 2 */ -#define GPIO_BSRR_BR3 ((uint32_t)0x00080000) /*!< Port x Reset bit 3 */ -#define GPIO_BSRR_BR4 ((uint32_t)0x00100000) /*!< Port x Reset bit 4 */ -#define GPIO_BSRR_BR5 ((uint32_t)0x00200000) /*!< Port x Reset bit 5 */ -#define GPIO_BSRR_BR6 ((uint32_t)0x00400000) /*!< Port x Reset bit 6 */ -#define GPIO_BSRR_BR7 ((uint32_t)0x00800000) /*!< Port x Reset bit 7 */ -#define GPIO_BSRR_BR8 ((uint32_t)0x01000000) /*!< Port x Reset bit 8 */ -#define GPIO_BSRR_BR9 ((uint32_t)0x02000000) /*!< Port x Reset bit 9 */ -#define GPIO_BSRR_BR10 ((uint32_t)0x04000000) /*!< Port x Reset bit 10 */ -#define GPIO_BSRR_BR11 ((uint32_t)0x08000000) /*!< Port x Reset bit 11 */ -#define GPIO_BSRR_BR12 ((uint32_t)0x10000000) /*!< Port x Reset bit 12 */ -#define GPIO_BSRR_BR13 ((uint32_t)0x20000000) /*!< Port x Reset bit 13 */ -#define GPIO_BSRR_BR14 ((uint32_t)0x40000000) /*!< Port x Reset bit 14 */ -#define GPIO_BSRR_BR15 ((uint32_t)0x80000000) /*!< Port x Reset bit 15 */ - -/******************* Bit definition for GPIO_BRR register *******************/ -#define GPIO_BRR_BR0 ((uint16_t)0x0001) /*!< Port x Reset bit 0 */ -#define GPIO_BRR_BR1 ((uint16_t)0x0002) /*!< Port x Reset bit 1 */ -#define GPIO_BRR_BR2 ((uint16_t)0x0004) /*!< Port x Reset bit 2 */ -#define GPIO_BRR_BR3 ((uint16_t)0x0008) /*!< Port x Reset bit 3 */ -#define GPIO_BRR_BR4 ((uint16_t)0x0010) /*!< Port x Reset bit 4 */ -#define GPIO_BRR_BR5 ((uint16_t)0x0020) /*!< Port x Reset bit 5 */ -#define GPIO_BRR_BR6 ((uint16_t)0x0040) /*!< Port x Reset bit 6 */ -#define GPIO_BRR_BR7 ((uint16_t)0x0080) /*!< Port x Reset bit 7 */ -#define GPIO_BRR_BR8 ((uint16_t)0x0100) /*!< Port x Reset bit 8 */ -#define GPIO_BRR_BR9 ((uint16_t)0x0200) /*!< Port x Reset bit 9 */ -#define GPIO_BRR_BR10 ((uint16_t)0x0400) /*!< Port x Reset bit 10 */ -#define GPIO_BRR_BR11 ((uint16_t)0x0800) /*!< Port x Reset bit 11 */ -#define GPIO_BRR_BR12 ((uint16_t)0x1000) /*!< Port x Reset bit 12 */ -#define GPIO_BRR_BR13 ((uint16_t)0x2000) /*!< Port x Reset bit 13 */ -#define GPIO_BRR_BR14 ((uint16_t)0x4000) /*!< Port x Reset bit 14 */ -#define GPIO_BRR_BR15 ((uint16_t)0x8000) /*!< Port x Reset bit 15 */ - -/****************** Bit definition for GPIO_LCKR register *******************/ -#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) /*!< Port x Lock bit 0 */ -#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) /*!< Port x Lock bit 1 */ -#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) /*!< Port x Lock bit 2 */ -#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) /*!< Port x Lock bit 3 */ -#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) /*!< Port x Lock bit 4 */ -#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) /*!< Port x Lock bit 5 */ -#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) /*!< Port x Lock bit 6 */ -#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) /*!< Port x Lock bit 7 */ -#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) /*!< Port x Lock bit 8 */ -#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) /*!< Port x Lock bit 9 */ -#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) /*!< Port x Lock bit 10 */ -#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) /*!< Port x Lock bit 11 */ -#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) /*!< Port x Lock bit 12 */ -#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) /*!< Port x Lock bit 13 */ -#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) /*!< Port x Lock bit 14 */ -#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) /*!< Port x Lock bit 15 */ -#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) /*!< Lock key */ - -/*----------------------------------------------------------------------------*/ - -/****************** Bit definition for AFIO_EVCR register *******************/ -#define AFIO_EVCR_PIN ((uint8_t)0x0F) /*!< PIN[3:0] bits (Pin selection) */ -#define AFIO_EVCR_PIN_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define AFIO_EVCR_PIN_1 ((uint8_t)0x02) /*!< Bit 1 */ -#define AFIO_EVCR_PIN_2 ((uint8_t)0x04) /*!< Bit 2 */ -#define AFIO_EVCR_PIN_3 ((uint8_t)0x08) /*!< Bit 3 */ - -/*!< PIN configuration */ -#define AFIO_EVCR_PIN_PX0 ((uint8_t)0x00) /*!< Pin 0 selected */ -#define AFIO_EVCR_PIN_PX1 ((uint8_t)0x01) /*!< Pin 1 selected */ -#define AFIO_EVCR_PIN_PX2 ((uint8_t)0x02) /*!< Pin 2 selected */ -#define AFIO_EVCR_PIN_PX3 ((uint8_t)0x03) /*!< Pin 3 selected */ -#define AFIO_EVCR_PIN_PX4 ((uint8_t)0x04) /*!< Pin 4 selected */ -#define AFIO_EVCR_PIN_PX5 ((uint8_t)0x05) /*!< Pin 5 selected */ -#define AFIO_EVCR_PIN_PX6 ((uint8_t)0x06) /*!< Pin 6 selected */ -#define AFIO_EVCR_PIN_PX7 ((uint8_t)0x07) /*!< Pin 7 selected */ -#define AFIO_EVCR_PIN_PX8 ((uint8_t)0x08) /*!< Pin 8 selected */ -#define AFIO_EVCR_PIN_PX9 ((uint8_t)0x09) /*!< Pin 9 selected */ -#define AFIO_EVCR_PIN_PX10 ((uint8_t)0x0A) /*!< Pin 10 selected */ -#define AFIO_EVCR_PIN_PX11 ((uint8_t)0x0B) /*!< Pin 11 selected */ -#define AFIO_EVCR_PIN_PX12 ((uint8_t)0x0C) /*!< Pin 12 selected */ -#define AFIO_EVCR_PIN_PX13 ((uint8_t)0x0D) /*!< Pin 13 selected */ -#define AFIO_EVCR_PIN_PX14 ((uint8_t)0x0E) /*!< Pin 14 selected */ -#define AFIO_EVCR_PIN_PX15 ((uint8_t)0x0F) /*!< Pin 15 selected */ - -#define AFIO_EVCR_PORT ((uint8_t)0x70) /*!< PORT[2:0] bits (Port selection) */ -#define AFIO_EVCR_PORT_0 ((uint8_t)0x10) /*!< Bit 0 */ -#define AFIO_EVCR_PORT_1 ((uint8_t)0x20) /*!< Bit 1 */ -#define AFIO_EVCR_PORT_2 ((uint8_t)0x40) /*!< Bit 2 */ - -/*!< PORT configuration */ -#define AFIO_EVCR_PORT_PA ((uint8_t)0x00) /*!< Port A selected */ -#define AFIO_EVCR_PORT_PB ((uint8_t)0x10) /*!< Port B selected */ -#define AFIO_EVCR_PORT_PC ((uint8_t)0x20) /*!< Port C selected */ -#define AFIO_EVCR_PORT_PD ((uint8_t)0x30) /*!< Port D selected */ -#define AFIO_EVCR_PORT_PE ((uint8_t)0x40) /*!< Port E selected */ - -#define AFIO_EVCR_EVOE ((uint8_t)0x80) /*!< Event Output Enable */ - -/****************** Bit definition for AFIO_MAPR register *******************/ -#define AFIO_MAPR_SPI1_REMAP ((uint32_t)0x00000001) /*!< SPI1 remapping */ -#define AFIO_MAPR_I2C1_REMAP ((uint32_t)0x00000002) /*!< I2C1 remapping */ -#define AFIO_MAPR_USART1_REMAP ((uint32_t)0x00000004) /*!< USART1 remapping */ -#define AFIO_MAPR_USART2_REMAP ((uint32_t)0x00000008) /*!< USART2 remapping */ - -#define AFIO_MAPR_USART3_REMAP ((uint32_t)0x00000030) /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ -#define AFIO_MAPR_USART3_REMAP_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define AFIO_MAPR_USART3_REMAP_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -/* USART3_REMAP configuration */ -#define AFIO_MAPR_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ -#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ -#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ - -#define AFIO_MAPR_TIM1_REMAP ((uint32_t)0x000000C0) /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ -#define AFIO_MAPR_TIM1_REMAP_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define AFIO_MAPR_TIM1_REMAP_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -/*!< TIM1_REMAP configuration */ -#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ -#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ -#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ - -#define AFIO_MAPR_TIM2_REMAP ((uint32_t)0x00000300) /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ -#define AFIO_MAPR_TIM2_REMAP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define AFIO_MAPR_TIM2_REMAP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -/*!< TIM2_REMAP configuration */ -#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ -#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ - -#define AFIO_MAPR_TIM3_REMAP ((uint32_t)0x00000C00) /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ -#define AFIO_MAPR_TIM3_REMAP_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define AFIO_MAPR_TIM3_REMAP_1 ((uint32_t)0x00000800) /*!< Bit 1 */ - -/*!< TIM3_REMAP configuration */ -#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ -#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ -#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ - -#define AFIO_MAPR_TIM4_REMAP ((uint32_t)0x00001000) /*!< TIM4_REMAP bit (TIM4 remapping) */ - -#define AFIO_MAPR_CAN_REMAP ((uint32_t)0x00006000) /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ -#define AFIO_MAPR_CAN_REMAP_0 ((uint32_t)0x00002000) /*!< Bit 0 */ -#define AFIO_MAPR_CAN_REMAP_1 ((uint32_t)0x00004000) /*!< Bit 1 */ - -/*!< CAN_REMAP configuration */ -#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ -#define AFIO_MAPR_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ -#define AFIO_MAPR_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ - -#define AFIO_MAPR_PD01_REMAP ((uint32_t)0x00008000) /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ -#define AFIO_MAPR_TIM5CH4_IREMAP ((uint32_t)0x00010000) /*!< TIM5 Channel4 Internal Remap */ -#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /*!< ADC 1 External Trigger Injected Conversion remapping */ -#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /*!< ADC 1 External Trigger Regular Conversion remapping */ -#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /*!< ADC 2 External Trigger Injected Conversion remapping */ -#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /*!< ADC 2 External Trigger Regular Conversion remapping */ - -/*!< SWJ_CFG configuration */ -#define AFIO_MAPR_SWJ_CFG ((uint32_t)0x07000000) /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ -#define AFIO_MAPR_SWJ_CFG_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define AFIO_MAPR_SWJ_CFG_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define AFIO_MAPR_SWJ_CFG_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - -#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ -#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ -#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /*!< JTAG-DP Disabled and SW-DP Enabled */ -#define AFIO_MAPR_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /*!< JTAG-DP Disabled and SW-DP Disabled */ - -#ifdef STM32F10X_CL -/*!< ETH_REMAP configuration */ - #define AFIO_MAPR_ETH_REMAP ((uint32_t)0x00200000) /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ - -/*!< CAN2_REMAP configuration */ - #define AFIO_MAPR_CAN2_REMAP ((uint32_t)0x00400000) /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ - -/*!< MII_RMII_SEL configuration */ - #define AFIO_MAPR_MII_RMII_SEL ((uint32_t)0x00800000) /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ - -/*!< SPI3_REMAP configuration */ - #define AFIO_MAPR_SPI3_REMAP ((uint32_t)0x10000000) /*!< SPI3_REMAP bit (SPI3 remapping) */ - -/*!< TIM2ITR1_IREMAP configuration */ - #define AFIO_MAPR_TIM2ITR1_IREMAP ((uint32_t)0x20000000) /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ - -/*!< PTP_PPS_REMAP configuration */ - #define AFIO_MAPR_PTP_PPS_REMAP ((uint32_t)0x40000000) /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ -#endif - -/***************** Bit definition for AFIO_EXTICR1 register *****************/ -#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */ -#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */ -#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */ -#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */ - -/*!< EXTI0 configuration */ -#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */ -#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */ -#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */ -#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */ -#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */ -#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */ -#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!< PG[0] pin */ - -/*!< EXTI1 configuration */ -#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */ -#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */ -#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */ -#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */ -#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */ -#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */ -#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!< PG[1] pin */ - -/*!< EXTI2 configuration */ -#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */ -#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */ -#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */ -#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */ -#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */ -#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */ -#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!< PG[2] pin */ - -/*!< EXTI3 configuration */ -#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */ -#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */ -#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */ -#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */ -#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */ -#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */ -#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!< PG[3] pin */ - -/***************** Bit definition for AFIO_EXTICR2 register *****************/ -#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */ -#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */ -#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */ -#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */ - -/*!< EXTI4 configuration */ -#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */ -#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */ -#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */ -#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */ -#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */ -#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */ -#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!< PG[4] pin */ - -/* EXTI5 configuration */ -#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */ -#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */ -#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */ -#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */ -#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */ -#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */ -#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!< PG[5] pin */ - -/*!< EXTI6 configuration */ -#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */ -#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */ -#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */ -#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */ -#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */ -#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */ -#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!< PG[6] pin */ - -/*!< EXTI7 configuration */ -#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */ -#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */ -#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */ -#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */ -#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */ -#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */ -#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!< PG[7] pin */ - -/***************** Bit definition for AFIO_EXTICR3 register *****************/ -#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */ -#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */ -#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */ -#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */ - -/*!< EXTI8 configuration */ -#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */ -#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */ -#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */ -#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */ -#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */ -#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */ -#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!< PG[8] pin */ - -/*!< EXTI9 configuration */ -#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */ -#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */ -#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */ -#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */ -#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */ -#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */ -#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!< PG[9] pin */ - -/*!< EXTI10 configuration */ -#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */ -#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */ -#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */ -#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */ -#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */ -#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */ -#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!< PG[10] pin */ - -/*!< EXTI11 configuration */ -#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */ -#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */ -#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */ -#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */ -#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */ -#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */ -#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!< PG[11] pin */ - -/***************** Bit definition for AFIO_EXTICR4 register *****************/ -#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */ -#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */ -#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */ -#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */ - -/* EXTI12 configuration */ -#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */ -#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */ -#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */ -#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */ -#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */ -#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */ -#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!< PG[12] pin */ - -/* EXTI13 configuration */ -#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */ -#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */ -#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */ -#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */ -#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */ -#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */ -#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!< PG[13] pin */ - -/*!< EXTI14 configuration */ -#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */ -#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */ -#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */ -#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */ -#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */ -#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */ -#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!< PG[14] pin */ - -/*!< EXTI15 configuration */ -#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */ -#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */ -#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */ -#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */ -#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */ -#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */ -#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!< PG[15] pin */ - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) -/****************** Bit definition for AFIO_MAPR2 register ******************/ -#define AFIO_MAPR2_TIM15_REMAP ((uint32_t)0x00000001) /*!< TIM15 remapping */ -#define AFIO_MAPR2_TIM16_REMAP ((uint32_t)0x00000002) /*!< TIM16 remapping */ -#define AFIO_MAPR2_TIM17_REMAP ((uint32_t)0x00000004) /*!< TIM17 remapping */ -#define AFIO_MAPR2_CEC_REMAP ((uint32_t)0x00000008) /*!< CEC remapping */ -#define AFIO_MAPR2_TIM1_DMA_REMAP ((uint32_t)0x00000010) /*!< TIM1_DMA remapping */ -#endif - -#ifdef STM32F10X_HD_VL -#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ -#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ -#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ -#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP ((uint32_t)0x00000800) /*!< TIM6/TIM7 and DAC DMA remapping */ -#define AFIO_MAPR2_TIM12_REMAP ((uint32_t)0x00001000) /*!< TIM12 remapping */ -#define AFIO_MAPR2_MISC_REMAP ((uint32_t)0x00002000) /*!< Miscellaneous remapping */ -#endif - -#ifdef STM32F10X_XL -/****************** Bit definition for AFIO_MAPR2 register ******************/ -#define AFIO_MAPR2_TIM9_REMAP ((uint32_t)0x00000020) /*!< TIM9 remapping */ -#define AFIO_MAPR2_TIM10_REMAP ((uint32_t)0x00000040) /*!< TIM10 remapping */ -#define AFIO_MAPR2_TIM11_REMAP ((uint32_t)0x00000080) /*!< TIM11 remapping */ -#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ -#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ -#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ -#endif - -/******************************************************************************/ -/* */ -/* SystemTick */ -/* */ -/******************************************************************************/ - -/***************** Bit definition for SysTick_CTRL register *****************/ -#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ -#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ -#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ -#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ - -/***************** Bit definition for SysTick_LOAD register *****************/ -#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ - -/***************** Bit definition for SysTick_VAL register ******************/ -#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ - -/***************** Bit definition for SysTick_CALIB register ****************/ -#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ -#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ -#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ - -/******************************************************************************/ -/* */ -/* Nested Vectored Interrupt Controller */ -/* */ -/******************************************************************************/ - -/****************** Bit definition for NVIC_ISER register *******************/ -#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */ -#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_ICER register *******************/ -#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */ -#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_ISPR register *******************/ -#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */ -#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_ICPR register *******************/ -#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */ -#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_IABR register *******************/ -#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */ -#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_PRI0 register *******************/ -#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ -#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ -#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ -#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ - -/****************** Bit definition for NVIC_PRI1 register *******************/ -#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ -#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ -#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ -#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ - -/****************** Bit definition for NVIC_PRI2 register *******************/ -#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ -#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ -#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ -#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ - -/****************** Bit definition for NVIC_PRI3 register *******************/ -#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ -#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ -#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ -#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ - -/****************** Bit definition for NVIC_PRI4 register *******************/ -#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ -#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ -#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ -#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ - -/****************** Bit definition for NVIC_PRI5 register *******************/ -#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ -#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ -#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ -#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ - -/****************** Bit definition for NVIC_PRI6 register *******************/ -#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ -#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ -#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ -#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ - -/****************** Bit definition for NVIC_PRI7 register *******************/ -#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ -#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ -#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ -#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ - -/****************** Bit definition for SCB_CPUID register *******************/ -#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ -#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ -#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ -#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ -#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ - -/******************* Bit definition for SCB_ICSR register *******************/ -#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ -#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ -#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ -#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ -#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ -#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ -#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ -#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ -#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ -#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ - -/******************* Bit definition for SCB_VTOR register *******************/ -#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ -#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ - -/*!<***************** Bit definition for SCB_AIRCR register *******************/ -#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ -#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ -#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ - -#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ -#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ - -/* prority group configuration */ -#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ -#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ - -#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ -#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ - -/******************* Bit definition for SCB_SCR register ********************/ -#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< Sleep on exit bit */ -#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< Sleep deep bit */ -#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< Wake up from WFE */ - -/******************** Bit definition for SCB_CCR register *******************/ -#define SCB_CCR_NONBASETHRDENA ((uint16_t)0x0001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ -#define SCB_CCR_USERSETMPEND ((uint16_t)0x0002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ -#define SCB_CCR_UNALIGN_TRP ((uint16_t)0x0008) /*!< Trap for unaligned access */ -#define SCB_CCR_DIV_0_TRP ((uint16_t)0x0010) /*!< Trap on Divide by 0 */ -#define SCB_CCR_BFHFNMIGN ((uint16_t)0x0100) /*!< Handlers running at priority -1 and -2 */ -#define SCB_CCR_STKALIGN ((uint16_t)0x0200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ - -/******************* Bit definition for SCB_SHPR register ********************/ -#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ -#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ -#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ -#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ - -/****************** Bit definition for SCB_SHCSR register *******************/ -#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ -#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ -#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ -#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ -#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ -#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ -#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ -#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ -#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ -#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ -#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ -#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ -#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ -#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ - -/******************* Bit definition for SCB_CFSR register *******************/ -/*!< MFSR */ -#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */ -#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */ -#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */ -#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */ -#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */ -/*!< BFSR */ -#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */ -#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */ -#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */ -#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */ -#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */ -#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */ -/*!< UFSR */ -#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to execute an undefined instruction */ -#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */ -#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */ -#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */ -#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */ -#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ - -/******************* Bit definition for SCB_HFSR register *******************/ -#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occurs because of vector table read on exception processing */ -#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ -#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ - -/******************* Bit definition for SCB_DFSR register *******************/ -#define SCB_DFSR_HALTED ((uint8_t)0x01) /*!< Halt request flag */ -#define SCB_DFSR_BKPT ((uint8_t)0x02) /*!< BKPT flag */ -#define SCB_DFSR_DWTTRAP ((uint8_t)0x04) /*!< Data Watchpoint and Trace (DWT) flag */ -#define SCB_DFSR_VCATCH ((uint8_t)0x08) /*!< Vector catch flag */ -#define SCB_DFSR_EXTERNAL ((uint8_t)0x10) /*!< External debug request flag */ - -/******************* Bit definition for SCB_MMFAR register ******************/ -#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */ - -/******************* Bit definition for SCB_BFAR register *******************/ -#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */ - -/******************* Bit definition for SCB_afsr register *******************/ -#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */ - -/******************************************************************************/ -/* */ -/* External Interrupt/Event Controller */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for EXTI_IMR register *******************/ -#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */ -#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */ -#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */ -#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */ -#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */ -#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */ -#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */ -#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */ -#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */ -#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */ -#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */ -#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */ -#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */ -#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */ -#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */ -#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */ -#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */ -#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */ -#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */ -#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */ - -/******************* Bit definition for EXTI_EMR register *******************/ -#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */ -#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */ -#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */ -#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */ -#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */ -#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */ -#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */ -#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */ -#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */ -#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */ -#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */ -#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */ -#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */ -#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */ -#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */ -#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */ -#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */ -#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */ -#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */ -#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */ - -/****************** Bit definition for EXTI_RTSR register *******************/ -#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */ -#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */ -#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */ -#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */ -#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */ -#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */ -#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */ -#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */ -#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */ -#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */ -#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */ -#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */ -#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */ -#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */ -#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */ -#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */ -#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */ -#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */ -#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */ -#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */ - -/****************** Bit definition for EXTI_FTSR register *******************/ -#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */ -#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */ -#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */ -#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */ -#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */ -#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */ -#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */ -#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */ -#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */ -#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */ -#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */ -#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */ -#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */ -#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */ -#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */ -#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */ -#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */ -#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */ -#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */ -#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */ - -/****************** Bit definition for EXTI_SWIER register ******************/ -#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */ -#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */ -#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */ -#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */ -#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */ -#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */ -#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */ -#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */ -#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */ -#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */ -#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */ -#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */ -#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */ -#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */ -#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */ -#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */ -#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */ -#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */ -#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */ -#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */ - -/******************* Bit definition for EXTI_PR register ********************/ -#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */ -#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */ -#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */ -#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */ -#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */ -#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */ -#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */ -#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */ -#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */ -#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */ -#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */ -#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */ -#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */ -#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */ -#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */ -#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */ -#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */ -#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */ -#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */ -#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */ - -/******************************************************************************/ -/* */ -/* DMA Controller */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for DMA_ISR register ********************/ -#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */ -#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */ -#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */ -#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */ -#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */ -#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */ -#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */ -#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */ -#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */ -#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */ -#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */ -#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */ -#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */ -#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */ -#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */ -#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */ -#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */ -#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */ -#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */ -#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */ -#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */ -#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */ -#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */ -#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */ -#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */ -#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */ -#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */ -#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */ - -/******************* Bit definition for DMA_IFCR register *******************/ -#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */ -#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */ -#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */ -#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */ -#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */ -#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */ -#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */ -#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */ -#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */ -#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */ -#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */ -#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */ -#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */ -#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */ -#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */ -#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */ -#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */ -#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */ -#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */ -#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */ -#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */ -#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */ -#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */ -#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */ -#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */ -#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */ -#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */ -#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */ - -/******************* Bit definition for DMA_CCR1 register *******************/ -#define DMA_CCR1_EN ((uint16_t)0x0001) /*!< Channel enable*/ -#define DMA_CCR1_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR1_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR1_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR1_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR1_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR1_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR1_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR1_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR1_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR1_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR1_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR1_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR1_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR1_PL ((uint16_t)0x3000) /*!< PL[1:0] bits(Channel Priority level) */ -#define DMA_CCR1_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR1_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR1_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/******************* Bit definition for DMA_CCR2 register *******************/ -#define DMA_CCR2_EN ((uint16_t)0x0001) /*!< Channel enable */ -#define DMA_CCR2_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR2_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR2_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR2_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR2_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR2_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR2_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR2_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR2_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR2_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR2_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR2_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR2_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR2_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR2_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR2_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR2_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/******************* Bit definition for DMA_CCR3 register *******************/ -#define DMA_CCR3_EN ((uint16_t)0x0001) /*!< Channel enable */ -#define DMA_CCR3_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR3_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR3_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR3_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR3_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR3_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR3_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR3_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR3_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR3_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR3_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR3_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR3_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR3_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR3_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR3_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR3_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/*!<****************** Bit definition for DMA_CCR4 register *******************/ -#define DMA_CCR4_EN ((uint16_t)0x0001) /*!< Channel enable */ -#define DMA_CCR4_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR4_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR4_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR4_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR4_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR4_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR4_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR4_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR4_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR4_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR4_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR4_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR4_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR4_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR4_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR4_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR4_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/****************** Bit definition for DMA_CCR5 register *******************/ -#define DMA_CCR5_EN ((uint16_t)0x0001) /*!< Channel enable */ -#define DMA_CCR5_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR5_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR5_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR5_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR5_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR5_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR5_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR5_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR5_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR5_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR5_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR5_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR5_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR5_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR5_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR5_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR5_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ - -/******************* Bit definition for DMA_CCR6 register *******************/ -#define DMA_CCR6_EN ((uint16_t)0x0001) /*!< Channel enable */ -#define DMA_CCR6_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR6_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR6_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR6_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR6_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR6_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR6_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR6_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR6_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR6_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR6_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR6_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR6_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR6_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR6_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR6_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR6_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/******************* Bit definition for DMA_CCR7 register *******************/ -#define DMA_CCR7_EN ((uint16_t)0x0001) /*!< Channel enable */ -#define DMA_CCR7_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR7_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR7_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR7_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR7_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR7_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR7_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR7_PSIZE , ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR7_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR7_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR7_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR7_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR7_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR7_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR7_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR7_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR7_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ - -/****************** Bit definition for DMA_CNDTR1 register ******************/ -#define DMA_CNDTR1_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ - -/****************** Bit definition for DMA_CNDTR2 register ******************/ -#define DMA_CNDTR2_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ - -/****************** Bit definition for DMA_CNDTR3 register ******************/ -#define DMA_CNDTR3_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ - -/****************** Bit definition for DMA_CNDTR4 register ******************/ -#define DMA_CNDTR4_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ - -/****************** Bit definition for DMA_CNDTR5 register ******************/ -#define DMA_CNDTR5_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ - -/****************** Bit definition for DMA_CNDTR6 register ******************/ -#define DMA_CNDTR6_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ - -/****************** Bit definition for DMA_CNDTR7 register ******************/ -#define DMA_CNDTR7_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ - -/****************** Bit definition for DMA_CPAR1 register *******************/ -#define DMA_CPAR1_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ - -/****************** Bit definition for DMA_CPAR2 register *******************/ -#define DMA_CPAR2_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ - -/****************** Bit definition for DMA_CPAR3 register *******************/ -#define DMA_CPAR3_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ - - -/****************** Bit definition for DMA_CPAR4 register *******************/ -#define DMA_CPAR4_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ - -/****************** Bit definition for DMA_CPAR5 register *******************/ -#define DMA_CPAR5_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ - -/****************** Bit definition for DMA_CPAR6 register *******************/ -#define DMA_CPAR6_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ - - -/****************** Bit definition for DMA_CPAR7 register *******************/ -#define DMA_CPAR7_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ - -/****************** Bit definition for DMA_CMAR1 register *******************/ -#define DMA_CMAR1_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ - -/****************** Bit definition for DMA_CMAR2 register *******************/ -#define DMA_CMAR2_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ - -/****************** Bit definition for DMA_CMAR3 register *******************/ -#define DMA_CMAR3_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ - - -/****************** Bit definition for DMA_CMAR4 register *******************/ -#define DMA_CMAR4_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ - -/****************** Bit definition for DMA_CMAR5 register *******************/ -#define DMA_CMAR5_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ - -/****************** Bit definition for DMA_CMAR6 register *******************/ -#define DMA_CMAR6_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ - -/****************** Bit definition for DMA_CMAR7 register *******************/ -#define DMA_CMAR7_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ - -/******************************************************************************/ -/* */ -/* Analog to Digital Converter */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for ADC_SR register ********************/ -#define ADC_SR_AWD ((uint8_t)0x01) /*!< Analog watchdog flag */ -#define ADC_SR_EOC ((uint8_t)0x02) /*!< End of conversion */ -#define ADC_SR_JEOC ((uint8_t)0x04) /*!< Injected channel end of conversion */ -#define ADC_SR_JSTRT ((uint8_t)0x08) /*!< Injected channel Start flag */ -#define ADC_SR_STRT ((uint8_t)0x10) /*!< Regular channel Start flag */ - -/******************* Bit definition for ADC_CR1 register ********************/ -#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */ -#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */ - -#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */ -#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */ -#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */ -#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */ -#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */ -#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */ -#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */ -#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */ - -#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */ -#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */ -#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */ -#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */ - -#define ADC_CR1_DUALMOD ((uint32_t)0x000F0000) /*!< DUALMOD[3:0] bits (Dual mode selection) */ -#define ADC_CR1_DUALMOD_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define ADC_CR1_DUALMOD_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define ADC_CR1_DUALMOD_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define ADC_CR1_DUALMOD_3 ((uint32_t)0x00080000) /*!< Bit 3 */ - -#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */ -#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */ - - -/******************* Bit definition for ADC_CR2 register ********************/ -#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */ -#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */ -#define ADC_CR2_CAL ((uint32_t)0x00000004) /*!< A/D Calibration */ -#define ADC_CR2_RSTCAL ((uint32_t)0x00000008) /*!< Reset Calibration */ -#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */ -#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */ - -#define ADC_CR2_JEXTSEL ((uint32_t)0x00007000) /*!< JEXTSEL[2:0] bits (External event select for injected group) */ -#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ -#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ -#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ - -#define ADC_CR2_JEXTTRIG ((uint32_t)0x00008000) /*!< External Trigger Conversion mode for injected channels */ - -#define ADC_CR2_EXTSEL ((uint32_t)0x000E0000) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */ -#define ADC_CR2_EXTSEL_0 ((uint32_t)0x00020000) /*!< Bit 0 */ -#define ADC_CR2_EXTSEL_1 ((uint32_t)0x00040000) /*!< Bit 1 */ -#define ADC_CR2_EXTSEL_2 ((uint32_t)0x00080000) /*!< Bit 2 */ - -#define ADC_CR2_EXTTRIG ((uint32_t)0x00100000) /*!< External Trigger Conversion mode for regular channels */ -#define ADC_CR2_JSWSTART ((uint32_t)0x00200000) /*!< Start Conversion of injected channels */ -#define ADC_CR2_SWSTART ((uint32_t)0x00400000) /*!< Start Conversion of regular channels */ -#define ADC_CR2_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */ - -/****************** Bit definition for ADC_SMPR1 register *******************/ -#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */ -#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */ - -#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */ -#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */ -#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */ -#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */ - -#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */ -#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */ -#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */ - -#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */ -#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */ -#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */ -#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */ - -#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */ -#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */ -#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */ -#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */ - -#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 15 Sample time selection) */ -#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */ -#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */ -#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */ - -#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */ -#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */ -#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */ - -#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */ -#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */ -#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */ -#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */ - -/****************** Bit definition for ADC_SMPR2 register *******************/ -#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */ -#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */ - -#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */ -#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ -#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ -#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ - -#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */ -#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */ -#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */ - -#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */ -#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */ -#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */ -#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */ - -#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */ -#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */ -#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */ -#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */ - -#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */ -#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */ -#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */ -#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */ - -#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */ -#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */ -#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */ - -#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */ -#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */ -#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */ -#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */ - -#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */ -#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - -#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */ -#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */ -#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */ -#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */ - -/****************** Bit definition for ADC_JOFR1 register *******************/ -#define ADC_JOFR1_JOFFSET1 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 1 */ - -/****************** Bit definition for ADC_JOFR2 register *******************/ -#define ADC_JOFR2_JOFFSET2 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 2 */ - -/****************** Bit definition for ADC_JOFR3 register *******************/ -#define ADC_JOFR3_JOFFSET3 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 3 */ - -/****************** Bit definition for ADC_JOFR4 register *******************/ -#define ADC_JOFR4_JOFFSET4 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 4 */ - -/******************* Bit definition for ADC_HTR register ********************/ -#define ADC_HTR_HT ((uint16_t)0x0FFF) /*!< Analog watchdog high threshold */ - -/******************* Bit definition for ADC_LTR register ********************/ -#define ADC_LTR_LT ((uint16_t)0x0FFF) /*!< Analog watchdog low threshold */ - -/******************* Bit definition for ADC_SQR1 register *******************/ -#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */ -#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */ - -#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */ -#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */ -#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */ -#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */ -#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */ -#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */ - -#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */ -#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */ -#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */ -#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */ -#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */ -#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */ -#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */ - -#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!< L[3:0] bits (Regular channel sequence length) */ -#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */ -#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */ - -/******************* Bit definition for ADC_SQR2 register *******************/ -#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */ -#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */ - -#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */ -#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */ -#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */ -#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */ -#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */ -#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */ - -#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */ -#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */ -#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */ -#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */ -#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */ -#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */ -#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */ - -#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */ -#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */ -#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */ -#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */ - -#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */ -#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */ -#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */ -#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */ -#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */ -#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */ - -/******************* Bit definition for ADC_SQR3 register *******************/ -#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */ -#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ - -#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */ -#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ -#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ -#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ -#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ -#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ - -#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */ -#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */ -#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ -#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ -#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ -#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ -#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ - -#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */ -#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ -#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */ -#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */ - -#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */ -#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */ -#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */ -#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */ -#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */ -#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */ - -/******************* Bit definition for ADC_JSQR register *******************/ -#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */ -#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ - -#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */ -#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ -#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ -#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ -#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ -#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ - -#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */ -#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */ -#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ -#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ -#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ -#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ -#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ - -#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */ -#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */ - -/******************* Bit definition for ADC_JDR1 register *******************/ -#define ADC_JDR1_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ - -/******************* Bit definition for ADC_JDR2 register *******************/ -#define ADC_JDR2_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ - -/******************* Bit definition for ADC_JDR3 register *******************/ -#define ADC_JDR3_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ - -/******************* Bit definition for ADC_JDR4 register *******************/ -#define ADC_JDR4_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ - -/******************** Bit definition for ADC_DR register ********************/ -#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */ -#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!< ADC2 data */ - -/******************************************************************************/ -/* */ -/* Digital to Analog Converter */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for DAC_CR register ********************/ -#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */ -#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */ -#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */ - -#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ -#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ -#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ -#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ - -#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ -#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ -#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - -#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */ -#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */ -#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */ -#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */ - -#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ -#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */ -#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */ -#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */ - -#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ -#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */ -#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */ - -#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ -#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - -#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */ - -/***************** Bit definition for DAC_SWTRIGR register ******************/ -#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!< DAC channel1 software trigger */ -#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!< DAC channel2 software trigger */ - -/***************** Bit definition for DAC_DHR12R1 register ******************/ -#define DAC_DHR12R1_DACC1DHR ((uint16_t)0x0FFF) /*!< DAC channel1 12-bit Right aligned data */ - -/***************** Bit definition for DAC_DHR12L1 register ******************/ -#define DAC_DHR12L1_DACC1DHR ((uint16_t)0xFFF0) /*!< DAC channel1 12-bit Left aligned data */ - -/****************** Bit definition for DAC_DHR8R1 register ******************/ -#define DAC_DHR8R1_DACC1DHR ((uint8_t)0xFF) /*!< DAC channel1 8-bit Right aligned data */ - -/***************** Bit definition for DAC_DHR12R2 register ******************/ -#define DAC_DHR12R2_DACC2DHR ((uint16_t)0x0FFF) /*!< DAC channel2 12-bit Right aligned data */ - -/***************** Bit definition for DAC_DHR12L2 register ******************/ -#define DAC_DHR12L2_DACC2DHR ((uint16_t)0xFFF0) /*!< DAC channel2 12-bit Left aligned data */ - -/****************** Bit definition for DAC_DHR8R2 register ******************/ -#define DAC_DHR8R2_DACC2DHR ((uint8_t)0xFF) /*!< DAC channel2 8-bit Right aligned data */ - -/***************** Bit definition for DAC_DHR12RD register ******************/ -#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */ -#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */ - -/***************** Bit definition for DAC_DHR12LD register ******************/ -#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */ -#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */ - -/****************** Bit definition for DAC_DHR8RD register ******************/ -#define DAC_DHR8RD_DACC1DHR ((uint16_t)0x00FF) /*!< DAC channel1 8-bit Right aligned data */ -#define DAC_DHR8RD_DACC2DHR ((uint16_t)0xFF00) /*!< DAC channel2 8-bit Right aligned data */ - -/******************* Bit definition for DAC_DOR1 register *******************/ -#define DAC_DOR1_DACC1DOR ((uint16_t)0x0FFF) /*!< DAC channel1 data output */ - -/******************* Bit definition for DAC_DOR2 register *******************/ -#define DAC_DOR2_DACC2DOR ((uint16_t)0x0FFF) /*!< DAC channel2 data output */ - -/******************** Bit definition for DAC_SR register ********************/ -#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */ -#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */ - -/******************************************************************************/ -/* */ -/* CEC */ -/* */ -/******************************************************************************/ -/******************** Bit definition for CEC_CFGR register ******************/ -#define CEC_CFGR_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ -#define CEC_CFGR_IE ((uint16_t)0x0002) /*!< Interrupt Enable */ -#define CEC_CFGR_BTEM ((uint16_t)0x0004) /*!< Bit Timing Error Mode */ -#define CEC_CFGR_BPEM ((uint16_t)0x0008) /*!< Bit Period Error Mode */ - -/******************** Bit definition for CEC_OAR register ******************/ -#define CEC_OAR_OA ((uint16_t)0x000F) /*!< OA[3:0]: Own Address */ -#define CEC_OAR_OA_0 ((uint16_t)0x0001) /*!< Bit 0 */ -#define CEC_OAR_OA_1 ((uint16_t)0x0002) /*!< Bit 1 */ -#define CEC_OAR_OA_2 ((uint16_t)0x0004) /*!< Bit 2 */ -#define CEC_OAR_OA_3 ((uint16_t)0x0008) /*!< Bit 3 */ - -/******************** Bit definition for CEC_PRES register ******************/ -#define CEC_PRES_PRES ((uint16_t)0x3FFF) /*!< Prescaler Counter Value */ - -/******************** Bit definition for CEC_ESR register ******************/ -#define CEC_ESR_BTE ((uint16_t)0x0001) /*!< Bit Timing Error */ -#define CEC_ESR_BPE ((uint16_t)0x0002) /*!< Bit Period Error */ -#define CEC_ESR_RBTFE ((uint16_t)0x0004) /*!< Rx Block Transfer Finished Error */ -#define CEC_ESR_SBE ((uint16_t)0x0008) /*!< Start Bit Error */ -#define CEC_ESR_ACKE ((uint16_t)0x0010) /*!< Block Acknowledge Error */ -#define CEC_ESR_LINE ((uint16_t)0x0020) /*!< Line Error */ -#define CEC_ESR_TBTFE ((uint16_t)0x0040) /*!< Tx Block Transfer Finished Error */ - -/******************** Bit definition for CEC_CSR register ******************/ -#define CEC_CSR_TSOM ((uint16_t)0x0001) /*!< Tx Start Of Message */ -#define CEC_CSR_TEOM ((uint16_t)0x0002) /*!< Tx End Of Message */ -#define CEC_CSR_TERR ((uint16_t)0x0004) /*!< Tx Error */ -#define CEC_CSR_TBTRF ((uint16_t)0x0008) /*!< Tx Byte Transfer Request or Block Transfer Finished */ -#define CEC_CSR_RSOM ((uint16_t)0x0010) /*!< Rx Start Of Message */ -#define CEC_CSR_REOM ((uint16_t)0x0020) /*!< Rx End Of Message */ -#define CEC_CSR_RERR ((uint16_t)0x0040) /*!< Rx Error */ -#define CEC_CSR_RBTF ((uint16_t)0x0080) /*!< Rx Block Transfer Finished */ - -/******************** Bit definition for CEC_TXD register ******************/ -#define CEC_TXD_TXD ((uint16_t)0x00FF) /*!< Tx Data register */ - -/******************** Bit definition for CEC_RXD register ******************/ -#define CEC_RXD_RXD ((uint16_t)0x00FF) /*!< Rx Data register */ - -/******************************************************************************/ -/* */ -/* TIM */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for TIM_CR1 register ********************/ -#define TIM_CR1_CEN ((uint16_t)0x0001) /*!< Counter enable */ -#define TIM_CR1_UDIS ((uint16_t)0x0002) /*!< Update disable */ -#define TIM_CR1_URS ((uint16_t)0x0004) /*!< Update request source */ -#define TIM_CR1_OPM ((uint16_t)0x0008) /*!< One pulse mode */ -#define TIM_CR1_DIR ((uint16_t)0x0010) /*!< Direction */ - -#define TIM_CR1_CMS ((uint16_t)0x0060) /*!< CMS[1:0] bits (Center-aligned mode selection) */ -#define TIM_CR1_CMS_0 ((uint16_t)0x0020) /*!< Bit 0 */ -#define TIM_CR1_CMS_1 ((uint16_t)0x0040) /*!< Bit 1 */ - -#define TIM_CR1_ARPE ((uint16_t)0x0080) /*!< Auto-reload preload enable */ - -#define TIM_CR1_CKD ((uint16_t)0x0300) /*!< CKD[1:0] bits (clock division) */ -#define TIM_CR1_CKD_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -/******************* Bit definition for TIM_CR2 register ********************/ -#define TIM_CR2_CCPC ((uint16_t)0x0001) /*!< Capture/Compare Preloaded Control */ -#define TIM_CR2_CCUS ((uint16_t)0x0004) /*!< Capture/Compare Control Update Selection */ -#define TIM_CR2_CCDS ((uint16_t)0x0008) /*!< Capture/Compare DMA Selection */ - -#define TIM_CR2_MMS ((uint16_t)0x0070) /*!< MMS[2:0] bits (Master Mode Selection) */ -#define TIM_CR2_MMS_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define TIM_CR2_MMS_1 ((uint16_t)0x0020) /*!< Bit 1 */ -#define TIM_CR2_MMS_2 ((uint16_t)0x0040) /*!< Bit 2 */ - -#define TIM_CR2_TI1S ((uint16_t)0x0080) /*!< TI1 Selection */ -#define TIM_CR2_OIS1 ((uint16_t)0x0100) /*!< Output Idle state 1 (OC1 output) */ -#define TIM_CR2_OIS1N ((uint16_t)0x0200) /*!< Output Idle state 1 (OC1N output) */ -#define TIM_CR2_OIS2 ((uint16_t)0x0400) /*!< Output Idle state 2 (OC2 output) */ -#define TIM_CR2_OIS2N ((uint16_t)0x0800) /*!< Output Idle state 2 (OC2N output) */ -#define TIM_CR2_OIS3 ((uint16_t)0x1000) /*!< Output Idle state 3 (OC3 output) */ -#define TIM_CR2_OIS3N ((uint16_t)0x2000) /*!< Output Idle state 3 (OC3N output) */ -#define TIM_CR2_OIS4 ((uint16_t)0x4000) /*!< Output Idle state 4 (OC4 output) */ - -/******************* Bit definition for TIM_SMCR register *******************/ -#define TIM_SMCR_SMS ((uint16_t)0x0007) /*!< SMS[2:0] bits (Slave mode selection) */ -#define TIM_SMCR_SMS_0 ((uint16_t)0x0001) /*!< Bit 0 */ -#define TIM_SMCR_SMS_1 ((uint16_t)0x0002) /*!< Bit 1 */ -#define TIM_SMCR_SMS_2 ((uint16_t)0x0004) /*!< Bit 2 */ - -#define TIM_SMCR_TS ((uint16_t)0x0070) /*!< TS[2:0] bits (Trigger selection) */ -#define TIM_SMCR_TS_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define TIM_SMCR_TS_1 ((uint16_t)0x0020) /*!< Bit 1 */ -#define TIM_SMCR_TS_2 ((uint16_t)0x0040) /*!< Bit 2 */ - -#define TIM_SMCR_MSM ((uint16_t)0x0080) /*!< Master/slave mode */ - -#define TIM_SMCR_ETF ((uint16_t)0x0F00) /*!< ETF[3:0] bits (External trigger filter) */ -#define TIM_SMCR_ETF_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define TIM_SMCR_ETF_1 ((uint16_t)0x0200) /*!< Bit 1 */ -#define TIM_SMCR_ETF_2 ((uint16_t)0x0400) /*!< Bit 2 */ -#define TIM_SMCR_ETF_3 ((uint16_t)0x0800) /*!< Bit 3 */ - -#define TIM_SMCR_ETPS ((uint16_t)0x3000) /*!< ETPS[1:0] bits (External trigger prescaler) */ -#define TIM_SMCR_ETPS_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define TIM_SMCR_ETPS_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define TIM_SMCR_ECE ((uint16_t)0x4000) /*!< External clock enable */ -#define TIM_SMCR_ETP ((uint16_t)0x8000) /*!< External trigger polarity */ - -/******************* Bit definition for TIM_DIER register *******************/ -#define TIM_DIER_UIE ((uint16_t)0x0001) /*!< Update interrupt enable */ -#define TIM_DIER_CC1IE ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt enable */ -#define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt enable */ -#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt enable */ -#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt enable */ -#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!< COM interrupt enable */ -#define TIM_DIER_TIE ((uint16_t)0x0040) /*!< Trigger interrupt enable */ -#define TIM_DIER_BIE ((uint16_t)0x0080) /*!< Break interrupt enable */ -#define TIM_DIER_UDE ((uint16_t)0x0100) /*!< Update DMA request enable */ -#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!< Capture/Compare 1 DMA request enable */ -#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!< Capture/Compare 2 DMA request enable */ -#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!< Capture/Compare 3 DMA request enable */ -#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!< Capture/Compare 4 DMA request enable */ -#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!< COM DMA request enable */ -#define TIM_DIER_TDE ((uint16_t)0x4000) /*!< Trigger DMA request enable */ - -/******************** Bit definition for TIM_SR register ********************/ -#define TIM_SR_UIF ((uint16_t)0x0001) /*!< Update interrupt Flag */ -#define TIM_SR_CC1IF ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt Flag */ -#define TIM_SR_CC2IF ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt Flag */ -#define TIM_SR_CC3IF ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt Flag */ -#define TIM_SR_CC4IF ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt Flag */ -#define TIM_SR_COMIF ((uint16_t)0x0020) /*!< COM interrupt Flag */ -#define TIM_SR_TIF ((uint16_t)0x0040) /*!< Trigger interrupt Flag */ -#define TIM_SR_BIF ((uint16_t)0x0080) /*!< Break interrupt Flag */ -#define TIM_SR_CC1OF ((uint16_t)0x0200) /*!< Capture/Compare 1 Overcapture Flag */ -#define TIM_SR_CC2OF ((uint16_t)0x0400) /*!< Capture/Compare 2 Overcapture Flag */ -#define TIM_SR_CC3OF ((uint16_t)0x0800) /*!< Capture/Compare 3 Overcapture Flag */ -#define TIM_SR_CC4OF ((uint16_t)0x1000) /*!< Capture/Compare 4 Overcapture Flag */ - -/******************* Bit definition for TIM_EGR register ********************/ -#define TIM_EGR_UG ((uint8_t)0x01) /*!< Update Generation */ -#define TIM_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation */ -#define TIM_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation */ -#define TIM_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation */ -#define TIM_EGR_CC4G ((uint8_t)0x10) /*!< Capture/Compare 4 Generation */ -#define TIM_EGR_COMG ((uint8_t)0x20) /*!< Capture/Compare Control Update Generation */ -#define TIM_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation */ -#define TIM_EGR_BG ((uint8_t)0x80) /*!< Break Generation */ - -/****************** Bit definition for TIM_CCMR1 register *******************/ -#define TIM_CCMR1_CC1S ((uint16_t)0x0003) /*!< CC1S[1:0] bits (Capture/Compare 1 Selection) */ -#define TIM_CCMR1_CC1S_0 ((uint16_t)0x0001) /*!< Bit 0 */ -#define TIM_CCMR1_CC1S_1 ((uint16_t)0x0002) /*!< Bit 1 */ - -#define TIM_CCMR1_OC1FE ((uint16_t)0x0004) /*!< Output Compare 1 Fast enable */ -#define TIM_CCMR1_OC1PE ((uint16_t)0x0008) /*!< Output Compare 1 Preload enable */ - -#define TIM_CCMR1_OC1M ((uint16_t)0x0070) /*!< OC1M[2:0] bits (Output Compare 1 Mode) */ -#define TIM_CCMR1_OC1M_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define TIM_CCMR1_OC1M_1 ((uint16_t)0x0020) /*!< Bit 1 */ -#define TIM_CCMR1_OC1M_2 ((uint16_t)0x0040) /*!< Bit 2 */ - -#define TIM_CCMR1_OC1CE ((uint16_t)0x0080) /*!< Output Compare 1Clear Enable */ - -#define TIM_CCMR1_CC2S ((uint16_t)0x0300) /*!< CC2S[1:0] bits (Capture/Compare 2 Selection) */ -#define TIM_CCMR1_CC2S_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define TIM_CCMR1_CC2S_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define TIM_CCMR1_OC2FE ((uint16_t)0x0400) /*!< Output Compare 2 Fast enable */ -#define TIM_CCMR1_OC2PE ((uint16_t)0x0800) /*!< Output Compare 2 Preload enable */ - -#define TIM_CCMR1_OC2M ((uint16_t)0x7000) /*!< OC2M[2:0] bits (Output Compare 2 Mode) */ -#define TIM_CCMR1_OC2M_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define TIM_CCMR1_OC2M_1 ((uint16_t)0x2000) /*!< Bit 1 */ -#define TIM_CCMR1_OC2M_2 ((uint16_t)0x4000) /*!< Bit 2 */ - -#define TIM_CCMR1_OC2CE ((uint16_t)0x8000) /*!< Output Compare 2 Clear Enable */ - -/*----------------------------------------------------------------------------*/ - -#define TIM_CCMR1_IC1PSC ((uint16_t)0x000C) /*!< IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ -#define TIM_CCMR1_IC1PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ -#define TIM_CCMR1_IC1PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ - -#define TIM_CCMR1_IC1F ((uint16_t)0x00F0) /*!< IC1F[3:0] bits (Input Capture 1 Filter) */ -#define TIM_CCMR1_IC1F_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define TIM_CCMR1_IC1F_1 ((uint16_t)0x0020) /*!< Bit 1 */ -#define TIM_CCMR1_IC1F_2 ((uint16_t)0x0040) /*!< Bit 2 */ -#define TIM_CCMR1_IC1F_3 ((uint16_t)0x0080) /*!< Bit 3 */ - -#define TIM_CCMR1_IC2PSC ((uint16_t)0x0C00) /*!< IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ -#define TIM_CCMR1_IC2PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define TIM_CCMR1_IC2PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define TIM_CCMR1_IC2F ((uint16_t)0xF000) /*!< IC2F[3:0] bits (Input Capture 2 Filter) */ -#define TIM_CCMR1_IC2F_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define TIM_CCMR1_IC2F_1 ((uint16_t)0x2000) /*!< Bit 1 */ -#define TIM_CCMR1_IC2F_2 ((uint16_t)0x4000) /*!< Bit 2 */ -#define TIM_CCMR1_IC2F_3 ((uint16_t)0x8000) /*!< Bit 3 */ - -/****************** Bit definition for TIM_CCMR2 register *******************/ -#define TIM_CCMR2_CC3S ((uint16_t)0x0003) /*!< CC3S[1:0] bits (Capture/Compare 3 Selection) */ -#define TIM_CCMR2_CC3S_0 ((uint16_t)0x0001) /*!< Bit 0 */ -#define TIM_CCMR2_CC3S_1 ((uint16_t)0x0002) /*!< Bit 1 */ - -#define TIM_CCMR2_OC3FE ((uint16_t)0x0004) /*!< Output Compare 3 Fast enable */ -#define TIM_CCMR2_OC3PE ((uint16_t)0x0008) /*!< Output Compare 3 Preload enable */ - -#define TIM_CCMR2_OC3M ((uint16_t)0x0070) /*!< OC3M[2:0] bits (Output Compare 3 Mode) */ -#define TIM_CCMR2_OC3M_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define TIM_CCMR2_OC3M_1 ((uint16_t)0x0020) /*!< Bit 1 */ -#define TIM_CCMR2_OC3M_2 ((uint16_t)0x0040) /*!< Bit 2 */ - -#define TIM_CCMR2_OC3CE ((uint16_t)0x0080) /*!< Output Compare 3 Clear Enable */ - -#define TIM_CCMR2_CC4S ((uint16_t)0x0300) /*!< CC4S[1:0] bits (Capture/Compare 4 Selection) */ -#define TIM_CCMR2_CC4S_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define TIM_CCMR2_CC4S_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define TIM_CCMR2_OC4FE ((uint16_t)0x0400) /*!< Output Compare 4 Fast enable */ -#define TIM_CCMR2_OC4PE ((uint16_t)0x0800) /*!< Output Compare 4 Preload enable */ - -#define TIM_CCMR2_OC4M ((uint16_t)0x7000) /*!< OC4M[2:0] bits (Output Compare 4 Mode) */ -#define TIM_CCMR2_OC4M_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define TIM_CCMR2_OC4M_1 ((uint16_t)0x2000) /*!< Bit 1 */ -#define TIM_CCMR2_OC4M_2 ((uint16_t)0x4000) /*!< Bit 2 */ - -#define TIM_CCMR2_OC4CE ((uint16_t)0x8000) /*!< Output Compare 4 Clear Enable */ - -/*----------------------------------------------------------------------------*/ - -#define TIM_CCMR2_IC3PSC ((uint16_t)0x000C) /*!< IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ -#define TIM_CCMR2_IC3PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ -#define TIM_CCMR2_IC3PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ - -#define TIM_CCMR2_IC3F ((uint16_t)0x00F0) /*!< IC3F[3:0] bits (Input Capture 3 Filter) */ -#define TIM_CCMR2_IC3F_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define TIM_CCMR2_IC3F_1 ((uint16_t)0x0020) /*!< Bit 1 */ -#define TIM_CCMR2_IC3F_2 ((uint16_t)0x0040) /*!< Bit 2 */ -#define TIM_CCMR2_IC3F_3 ((uint16_t)0x0080) /*!< Bit 3 */ - -#define TIM_CCMR2_IC4PSC ((uint16_t)0x0C00) /*!< IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ -#define TIM_CCMR2_IC4PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define TIM_CCMR2_IC4PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define TIM_CCMR2_IC4F ((uint16_t)0xF000) /*!< IC4F[3:0] bits (Input Capture 4 Filter) */ -#define TIM_CCMR2_IC4F_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define TIM_CCMR2_IC4F_1 ((uint16_t)0x2000) /*!< Bit 1 */ -#define TIM_CCMR2_IC4F_2 ((uint16_t)0x4000) /*!< Bit 2 */ -#define TIM_CCMR2_IC4F_3 ((uint16_t)0x8000) /*!< Bit 3 */ - -/******************* Bit definition for TIM_CCER register *******************/ -#define TIM_CCER_CC1E ((uint16_t)0x0001) /*!< Capture/Compare 1 output enable */ -#define TIM_CCER_CC1P ((uint16_t)0x0002) /*!< Capture/Compare 1 output Polarity */ -#define TIM_CCER_CC1NE ((uint16_t)0x0004) /*!< Capture/Compare 1 Complementary output enable */ -#define TIM_CCER_CC1NP ((uint16_t)0x0008) /*!< Capture/Compare 1 Complementary output Polarity */ -#define TIM_CCER_CC2E ((uint16_t)0x0010) /*!< Capture/Compare 2 output enable */ -#define TIM_CCER_CC2P ((uint16_t)0x0020) /*!< Capture/Compare 2 output Polarity */ -#define TIM_CCER_CC2NE ((uint16_t)0x0040) /*!< Capture/Compare 2 Complementary output enable */ -#define TIM_CCER_CC2NP ((uint16_t)0x0080) /*!< Capture/Compare 2 Complementary output Polarity */ -#define TIM_CCER_CC3E ((uint16_t)0x0100) /*!< Capture/Compare 3 output enable */ -#define TIM_CCER_CC3P ((uint16_t)0x0200) /*!< Capture/Compare 3 output Polarity */ -#define TIM_CCER_CC3NE ((uint16_t)0x0400) /*!< Capture/Compare 3 Complementary output enable */ -#define TIM_CCER_CC3NP ((uint16_t)0x0800) /*!< Capture/Compare 3 Complementary output Polarity */ -#define TIM_CCER_CC4E ((uint16_t)0x1000) /*!< Capture/Compare 4 output enable */ -#define TIM_CCER_CC4P ((uint16_t)0x2000) /*!< Capture/Compare 4 output Polarity */ -#define TIM_CCER_CC4NP ((uint16_t)0x8000) /*!< Capture/Compare 4 Complementary output Polarity */ - -/******************* Bit definition for TIM_CNT register ********************/ -#define TIM_CNT_CNT ((uint16_t)0xFFFF) /*!< Counter Value */ - -/******************* Bit definition for TIM_PSC register ********************/ -#define TIM_PSC_PSC ((uint16_t)0xFFFF) /*!< Prescaler Value */ - -/******************* Bit definition for TIM_ARR register ********************/ -#define TIM_ARR_ARR ((uint16_t)0xFFFF) /*!< actual auto-reload Value */ - -/******************* Bit definition for TIM_RCR register ********************/ -#define TIM_RCR_REP ((uint8_t)0xFF) /*!< Repetition Counter Value */ - -/******************* Bit definition for TIM_CCR1 register *******************/ -#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!< Capture/Compare 1 Value */ - -/******************* Bit definition for TIM_CCR2 register *******************/ -#define TIM_CCR2_CCR2 ((uint16_t)0xFFFF) /*!< Capture/Compare 2 Value */ - -/******************* Bit definition for TIM_CCR3 register *******************/ -#define TIM_CCR3_CCR3 ((uint16_t)0xFFFF) /*!< Capture/Compare 3 Value */ - -/******************* Bit definition for TIM_CCR4 register *******************/ -#define TIM_CCR4_CCR4 ((uint16_t)0xFFFF) /*!< Capture/Compare 4 Value */ - -/******************* Bit definition for TIM_BDTR register *******************/ -#define TIM_BDTR_DTG ((uint16_t)0x00FF) /*!< DTG[0:7] bits (Dead-Time Generator set-up) */ -#define TIM_BDTR_DTG_0 ((uint16_t)0x0001) /*!< Bit 0 */ -#define TIM_BDTR_DTG_1 ((uint16_t)0x0002) /*!< Bit 1 */ -#define TIM_BDTR_DTG_2 ((uint16_t)0x0004) /*!< Bit 2 */ -#define TIM_BDTR_DTG_3 ((uint16_t)0x0008) /*!< Bit 3 */ -#define TIM_BDTR_DTG_4 ((uint16_t)0x0010) /*!< Bit 4 */ -#define TIM_BDTR_DTG_5 ((uint16_t)0x0020) /*!< Bit 5 */ -#define TIM_BDTR_DTG_6 ((uint16_t)0x0040) /*!< Bit 6 */ -#define TIM_BDTR_DTG_7 ((uint16_t)0x0080) /*!< Bit 7 */ - -#define TIM_BDTR_LOCK ((uint16_t)0x0300) /*!< LOCK[1:0] bits (Lock Configuration) */ -#define TIM_BDTR_LOCK_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define TIM_BDTR_LOCK_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define TIM_BDTR_OSSI ((uint16_t)0x0400) /*!< Off-State Selection for Idle mode */ -#define TIM_BDTR_OSSR ((uint16_t)0x0800) /*!< Off-State Selection for Run mode */ -#define TIM_BDTR_BKE ((uint16_t)0x1000) /*!< Break enable */ -#define TIM_BDTR_BKP ((uint16_t)0x2000) /*!< Break Polarity */ -#define TIM_BDTR_AOE ((uint16_t)0x4000) /*!< Automatic Output enable */ -#define TIM_BDTR_MOE ((uint16_t)0x8000) /*!< Main Output enable */ - -/******************* Bit definition for TIM_DCR register ********************/ -#define TIM_DCR_DBA ((uint16_t)0x001F) /*!< DBA[4:0] bits (DMA Base Address) */ -#define TIM_DCR_DBA_0 ((uint16_t)0x0001) /*!< Bit 0 */ -#define TIM_DCR_DBA_1 ((uint16_t)0x0002) /*!< Bit 1 */ -#define TIM_DCR_DBA_2 ((uint16_t)0x0004) /*!< Bit 2 */ -#define TIM_DCR_DBA_3 ((uint16_t)0x0008) /*!< Bit 3 */ -#define TIM_DCR_DBA_4 ((uint16_t)0x0010) /*!< Bit 4 */ - -#define TIM_DCR_DBL ((uint16_t)0x1F00) /*!< DBL[4:0] bits (DMA Burst Length) */ -#define TIM_DCR_DBL_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define TIM_DCR_DBL_1 ((uint16_t)0x0200) /*!< Bit 1 */ -#define TIM_DCR_DBL_2 ((uint16_t)0x0400) /*!< Bit 2 */ -#define TIM_DCR_DBL_3 ((uint16_t)0x0800) /*!< Bit 3 */ -#define TIM_DCR_DBL_4 ((uint16_t)0x1000) /*!< Bit 4 */ - -/******************* Bit definition for TIM_DMAR register *******************/ -#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /*!< DMA register for burst accesses */ - -/******************************************************************************/ -/* */ -/* Real-Time Clock */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for RTC_CRH register ********************/ -#define RTC_CRH_SECIE ((uint8_t)0x01) /*!< Second Interrupt Enable */ -#define RTC_CRH_ALRIE ((uint8_t)0x02) /*!< Alarm Interrupt Enable */ -#define RTC_CRH_OWIE ((uint8_t)0x04) /*!< OverfloW Interrupt Enable */ - -/******************* Bit definition for RTC_CRL register ********************/ -#define RTC_CRL_SECF ((uint8_t)0x01) /*!< Second Flag */ -#define RTC_CRL_ALRF ((uint8_t)0x02) /*!< Alarm Flag */ -#define RTC_CRL_OWF ((uint8_t)0x04) /*!< OverfloW Flag */ -#define RTC_CRL_RSF ((uint8_t)0x08) /*!< Registers Synchronized Flag */ -#define RTC_CRL_CNF ((uint8_t)0x10) /*!< Configuration Flag */ -#define RTC_CRL_RTOFF ((uint8_t)0x20) /*!< RTC operation OFF */ - -/******************* Bit definition for RTC_PRLH register *******************/ -#define RTC_PRLH_PRL ((uint16_t)0x000F) /*!< RTC Prescaler Reload Value High */ - -/******************* Bit definition for RTC_PRLL register *******************/ -#define RTC_PRLL_PRL ((uint16_t)0xFFFF) /*!< RTC Prescaler Reload Value Low */ - -/******************* Bit definition for RTC_DIVH register *******************/ -#define RTC_DIVH_RTC_DIV ((uint16_t)0x000F) /*!< RTC Clock Divider High */ - -/******************* Bit definition for RTC_DIVL register *******************/ -#define RTC_DIVL_RTC_DIV ((uint16_t)0xFFFF) /*!< RTC Clock Divider Low */ - -/******************* Bit definition for RTC_CNTH register *******************/ -#define RTC_CNTH_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter High */ - -/******************* Bit definition for RTC_CNTL register *******************/ -#define RTC_CNTL_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter Low */ - -/******************* Bit definition for RTC_ALRH register *******************/ -#define RTC_ALRH_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm High */ - -/******************* Bit definition for RTC_ALRL register *******************/ -#define RTC_ALRL_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm Low */ - -/******************************************************************************/ -/* */ -/* Independent WATCHDOG */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for IWDG_KR register ********************/ -#define IWDG_KR_KEY ((uint16_t)0xFFFF) /*!< Key value (write only, read 0000h) */ - -/******************* Bit definition for IWDG_PR register ********************/ -#define IWDG_PR_PR ((uint8_t)0x07) /*!< PR[2:0] (Prescaler divider) */ -#define IWDG_PR_PR_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define IWDG_PR_PR_1 ((uint8_t)0x02) /*!< Bit 1 */ -#define IWDG_PR_PR_2 ((uint8_t)0x04) /*!< Bit 2 */ - -/******************* Bit definition for IWDG_RLR register *******************/ -#define IWDG_RLR_RL ((uint16_t)0x0FFF) /*!< Watchdog counter reload value */ - -/******************* Bit definition for IWDG_SR register ********************/ -#define IWDG_SR_PVU ((uint8_t)0x01) /*!< Watchdog prescaler value update */ -#define IWDG_SR_RVU ((uint8_t)0x02) /*!< Watchdog counter reload value update */ - -/******************************************************************************/ -/* */ -/* Window WATCHDOG */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for WWDG_CR register ********************/ -#define WWDG_CR_T ((uint8_t)0x7F) /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */ -#define WWDG_CR_T0 ((uint8_t)0x01) /*!< Bit 0 */ -#define WWDG_CR_T1 ((uint8_t)0x02) /*!< Bit 1 */ -#define WWDG_CR_T2 ((uint8_t)0x04) /*!< Bit 2 */ -#define WWDG_CR_T3 ((uint8_t)0x08) /*!< Bit 3 */ -#define WWDG_CR_T4 ((uint8_t)0x10) /*!< Bit 4 */ -#define WWDG_CR_T5 ((uint8_t)0x20) /*!< Bit 5 */ -#define WWDG_CR_T6 ((uint8_t)0x40) /*!< Bit 6 */ - -#define WWDG_CR_WDGA ((uint8_t)0x80) /*!< Activation bit */ - -/******************* Bit definition for WWDG_CFR register *******************/ -#define WWDG_CFR_W ((uint16_t)0x007F) /*!< W[6:0] bits (7-bit window value) */ -#define WWDG_CFR_W0 ((uint16_t)0x0001) /*!< Bit 0 */ -#define WWDG_CFR_W1 ((uint16_t)0x0002) /*!< Bit 1 */ -#define WWDG_CFR_W2 ((uint16_t)0x0004) /*!< Bit 2 */ -#define WWDG_CFR_W3 ((uint16_t)0x0008) /*!< Bit 3 */ -#define WWDG_CFR_W4 ((uint16_t)0x0010) /*!< Bit 4 */ -#define WWDG_CFR_W5 ((uint16_t)0x0020) /*!< Bit 5 */ -#define WWDG_CFR_W6 ((uint16_t)0x0040) /*!< Bit 6 */ - -#define WWDG_CFR_WDGTB ((uint16_t)0x0180) /*!< WDGTB[1:0] bits (Timer Base) */ -#define WWDG_CFR_WDGTB0 ((uint16_t)0x0080) /*!< Bit 0 */ -#define WWDG_CFR_WDGTB1 ((uint16_t)0x0100) /*!< Bit 1 */ - -#define WWDG_CFR_EWI ((uint16_t)0x0200) /*!< Early Wakeup Interrupt */ - -/******************* Bit definition for WWDG_SR register ********************/ -#define WWDG_SR_EWIF ((uint8_t)0x01) /*!< Early Wakeup Interrupt Flag */ - -/******************************************************************************/ -/* */ -/* Flexible Static Memory Controller */ -/* */ -/******************************************************************************/ - -/****************** Bit definition for FSMC_BCR1 register *******************/ -#define FSMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ -#define FSMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ - -#define FSMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ -#define FSMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define FSMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define FSMC_BCR1_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ -#define FSMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define FSMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ -#define FSMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ -#define FSMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ -#define FSMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ -#define FSMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ -#define FSMC_BCR1_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ -#define FSMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ -#define FSMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ -#define FSMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ -#define FSMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ - -/****************** Bit definition for FSMC_BCR2 register *******************/ -#define FSMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ -#define FSMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ - -#define FSMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ -#define FSMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define FSMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define FSMC_BCR2_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ -#define FSMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define FSMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ -#define FSMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ -#define FSMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ -#define FSMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ -#define FSMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ -#define FSMC_BCR2_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ -#define FSMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ -#define FSMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ -#define FSMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ -#define FSMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ - -/****************** Bit definition for FSMC_BCR3 register *******************/ -#define FSMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ -#define FSMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ - -#define FSMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ -#define FSMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define FSMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define FSMC_BCR3_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ -#define FSMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define FSMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ -#define FSMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ -#define FSMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit. */ -#define FSMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ -#define FSMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ -#define FSMC_BCR3_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ -#define FSMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ -#define FSMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ -#define FSMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ -#define FSMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ - -/****************** Bit definition for FSMC_BCR4 register *******************/ -#define FSMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ -#define FSMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ - -#define FSMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ -#define FSMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define FSMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define FSMC_BCR4_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ -#define FSMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define FSMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ -#define FSMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ -#define FSMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ -#define FSMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ -#define FSMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ -#define FSMC_BCR4_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ -#define FSMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ -#define FSMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ -#define FSMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ -#define FSMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ - -/****************** Bit definition for FSMC_BTR1 register ******************/ -#define FSMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - -#define FSMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define FSMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define FSMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define FSMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - -#define FSMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ - -#define FSMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define FSMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ -#define FSMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define FSMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ - -#define FSMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ -#define FSMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - -#define FSMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define FSMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -/****************** Bit definition for FSMC_BTR2 register *******************/ -#define FSMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - -#define FSMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define FSMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define FSMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define FSMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - -#define FSMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ - -#define FSMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define FSMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ -#define FSMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define FSMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ - -#define FSMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ -#define FSMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - -#define FSMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define FSMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -/******************* Bit definition for FSMC_BTR3 register *******************/ -#define FSMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - -#define FSMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define FSMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define FSMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define FSMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - -#define FSMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ - -#define FSMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define FSMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ -#define FSMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define FSMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ - -#define FSMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ -#define FSMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - -#define FSMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define FSMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -/****************** Bit definition for FSMC_BTR4 register *******************/ -#define FSMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - -#define FSMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define FSMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define FSMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define FSMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - -#define FSMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ - -#define FSMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define FSMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ -#define FSMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define FSMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ - -#define FSMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ -#define FSMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - -#define FSMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define FSMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -/****************** Bit definition for FSMC_BWTR1 register ******************/ -#define FSMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - -#define FSMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define FSMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define FSMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define FSMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - -#define FSMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define FSMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ -#define FSMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define FSMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ - -#define FSMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ -#define FSMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - -#define FSMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define FSMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -/****************** Bit definition for FSMC_BWTR2 register ******************/ -#define FSMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - -#define FSMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define FSMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define FSMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define FSMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - -#define FSMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define FSMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1*/ -#define FSMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define FSMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ - -#define FSMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ -#define FSMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - -#define FSMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define FSMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -/****************** Bit definition for FSMC_BWTR3 register ******************/ -#define FSMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - -#define FSMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define FSMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define FSMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define FSMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - -#define FSMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define FSMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ -#define FSMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define FSMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ - -#define FSMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ -#define FSMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - -#define FSMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define FSMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -/****************** Bit definition for FSMC_BWTR4 register ******************/ -#define FSMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - -#define FSMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define FSMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define FSMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define FSMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - -#define FSMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define FSMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ -#define FSMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ -#define FSMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ - -#define FSMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ -#define FSMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - -#define FSMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define FSMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -/****************** Bit definition for FSMC_PCR2 register *******************/ -#define FSMC_PCR2_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ -#define FSMC_PCR2_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ -#define FSMC_PCR2_PTYP ((uint32_t)0x00000008) /*!< Memory type */ - -#define FSMC_PCR2_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ -#define FSMC_PCR2_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_PCR2_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define FSMC_PCR2_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ - -#define FSMC_PCR2_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ -#define FSMC_PCR2_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ -#define FSMC_PCR2_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ -#define FSMC_PCR2_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ -#define FSMC_PCR2_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ - -#define FSMC_PCR2_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ -#define FSMC_PCR2_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ -#define FSMC_PCR2_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ -#define FSMC_PCR2_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ -#define FSMC_PCR2_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ - -#define FSMC_PCR2_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[1:0] bits (ECC page size) */ -#define FSMC_PCR2_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ -#define FSMC_PCR2_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ -#define FSMC_PCR2_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ - -/****************** Bit definition for FSMC_PCR3 register *******************/ -#define FSMC_PCR3_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ -#define FSMC_PCR3_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ -#define FSMC_PCR3_PTYP ((uint32_t)0x00000008) /*!< Memory type */ - -#define FSMC_PCR3_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ -#define FSMC_PCR3_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_PCR3_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define FSMC_PCR3_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ - -#define FSMC_PCR3_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ -#define FSMC_PCR3_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ -#define FSMC_PCR3_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ -#define FSMC_PCR3_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ -#define FSMC_PCR3_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ - -#define FSMC_PCR3_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ -#define FSMC_PCR3_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ -#define FSMC_PCR3_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ -#define FSMC_PCR3_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ -#define FSMC_PCR3_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ - -#define FSMC_PCR3_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ -#define FSMC_PCR3_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ -#define FSMC_PCR3_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ -#define FSMC_PCR3_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ - -/****************** Bit definition for FSMC_PCR4 register *******************/ -#define FSMC_PCR4_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ -#define FSMC_PCR4_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ -#define FSMC_PCR4_PTYP ((uint32_t)0x00000008) /*!< Memory type */ - -#define FSMC_PCR4_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ -#define FSMC_PCR4_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define FSMC_PCR4_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define FSMC_PCR4_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ - -#define FSMC_PCR4_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ -#define FSMC_PCR4_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ -#define FSMC_PCR4_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ -#define FSMC_PCR4_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ -#define FSMC_PCR4_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ - -#define FSMC_PCR4_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ -#define FSMC_PCR4_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ -#define FSMC_PCR4_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ -#define FSMC_PCR4_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ -#define FSMC_PCR4_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ - -#define FSMC_PCR4_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ -#define FSMC_PCR4_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ -#define FSMC_PCR4_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ -#define FSMC_PCR4_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ - -/******************* Bit definition for FSMC_SR2 register *******************/ -#define FSMC_SR2_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ -#define FSMC_SR2_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ -#define FSMC_SR2_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ -#define FSMC_SR2_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ -#define FSMC_SR2_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ -#define FSMC_SR2_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ -#define FSMC_SR2_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ - -/******************* Bit definition for FSMC_SR3 register *******************/ -#define FSMC_SR3_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ -#define FSMC_SR3_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ -#define FSMC_SR3_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ -#define FSMC_SR3_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ -#define FSMC_SR3_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ -#define FSMC_SR3_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ -#define FSMC_SR3_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ - -/******************* Bit definition for FSMC_SR4 register *******************/ -#define FSMC_SR4_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ -#define FSMC_SR4_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ -#define FSMC_SR4_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ -#define FSMC_SR4_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ -#define FSMC_SR4_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ -#define FSMC_SR4_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ -#define FSMC_SR4_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ - -/****************** Bit definition for FSMC_PMEM2 register ******************/ -#define FSMC_PMEM2_MEMSET2 ((uint32_t)0x000000FF) /*!< MEMSET2[7:0] bits (Common memory 2 setup time) */ -#define FSMC_PMEM2_MEMSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_PMEM2_MEMSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_PMEM2_MEMSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_PMEM2_MEMSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define FSMC_PMEM2_MEMSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ -#define FSMC_PMEM2_MEMSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ -#define FSMC_PMEM2_MEMSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ -#define FSMC_PMEM2_MEMSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ - -#define FSMC_PMEM2_MEMWAIT2 ((uint32_t)0x0000FF00) /*!< MEMWAIT2[7:0] bits (Common memory 2 wait time) */ -#define FSMC_PMEM2_MEMWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_PMEM2_MEMWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_PMEM2_MEMWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_PMEM2_MEMWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ -#define FSMC_PMEM2_MEMWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ -#define FSMC_PMEM2_MEMWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ -#define FSMC_PMEM2_MEMWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ -#define FSMC_PMEM2_MEMWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ - -#define FSMC_PMEM2_MEMHOLD2 ((uint32_t)0x00FF0000) /*!< MEMHOLD2[7:0] bits (Common memory 2 hold time) */ -#define FSMC_PMEM2_MEMHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_PMEM2_MEMHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_PMEM2_MEMHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_PMEM2_MEMHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ -#define FSMC_PMEM2_MEMHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ -#define FSMC_PMEM2_MEMHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ -#define FSMC_PMEM2_MEMHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ -#define FSMC_PMEM2_MEMHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ - -#define FSMC_PMEM2_MEMHIZ2 ((uint32_t)0xFF000000) /*!< MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */ -#define FSMC_PMEM2_MEMHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_PMEM2_MEMHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_PMEM2_MEMHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_PMEM2_MEMHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ -#define FSMC_PMEM2_MEMHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ -#define FSMC_PMEM2_MEMHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ -#define FSMC_PMEM2_MEMHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ -#define FSMC_PMEM2_MEMHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ - -/****************** Bit definition for FSMC_PMEM3 register ******************/ -#define FSMC_PMEM3_MEMSET3 ((uint32_t)0x000000FF) /*!< MEMSET3[7:0] bits (Common memory 3 setup time) */ -#define FSMC_PMEM3_MEMSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_PMEM3_MEMSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_PMEM3_MEMSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_PMEM3_MEMSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define FSMC_PMEM3_MEMSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ -#define FSMC_PMEM3_MEMSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ -#define FSMC_PMEM3_MEMSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ -#define FSMC_PMEM3_MEMSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ - -#define FSMC_PMEM3_MEMWAIT3 ((uint32_t)0x0000FF00) /*!< MEMWAIT3[7:0] bits (Common memory 3 wait time) */ -#define FSMC_PMEM3_MEMWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_PMEM3_MEMWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_PMEM3_MEMWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_PMEM3_MEMWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ -#define FSMC_PMEM3_MEMWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ -#define FSMC_PMEM3_MEMWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ -#define FSMC_PMEM3_MEMWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ -#define FSMC_PMEM3_MEMWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ - -#define FSMC_PMEM3_MEMHOLD3 ((uint32_t)0x00FF0000) /*!< MEMHOLD3[7:0] bits (Common memory 3 hold time) */ -#define FSMC_PMEM3_MEMHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_PMEM3_MEMHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_PMEM3_MEMHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_PMEM3_MEMHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ -#define FSMC_PMEM3_MEMHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ -#define FSMC_PMEM3_MEMHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ -#define FSMC_PMEM3_MEMHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ -#define FSMC_PMEM3_MEMHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ - -#define FSMC_PMEM3_MEMHIZ3 ((uint32_t)0xFF000000) /*!< MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */ -#define FSMC_PMEM3_MEMHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_PMEM3_MEMHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_PMEM3_MEMHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_PMEM3_MEMHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ -#define FSMC_PMEM3_MEMHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ -#define FSMC_PMEM3_MEMHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ -#define FSMC_PMEM3_MEMHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ -#define FSMC_PMEM3_MEMHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ - -/****************** Bit definition for FSMC_PMEM4 register ******************/ -#define FSMC_PMEM4_MEMSET4 ((uint32_t)0x000000FF) /*!< MEMSET4[7:0] bits (Common memory 4 setup time) */ -#define FSMC_PMEM4_MEMSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_PMEM4_MEMSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_PMEM4_MEMSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_PMEM4_MEMSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define FSMC_PMEM4_MEMSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ -#define FSMC_PMEM4_MEMSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ -#define FSMC_PMEM4_MEMSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ -#define FSMC_PMEM4_MEMSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ - -#define FSMC_PMEM4_MEMWAIT4 ((uint32_t)0x0000FF00) /*!< MEMWAIT4[7:0] bits (Common memory 4 wait time) */ -#define FSMC_PMEM4_MEMWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_PMEM4_MEMWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_PMEM4_MEMWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_PMEM4_MEMWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ -#define FSMC_PMEM4_MEMWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ -#define FSMC_PMEM4_MEMWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ -#define FSMC_PMEM4_MEMWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ -#define FSMC_PMEM4_MEMWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ - -#define FSMC_PMEM4_MEMHOLD4 ((uint32_t)0x00FF0000) /*!< MEMHOLD4[7:0] bits (Common memory 4 hold time) */ -#define FSMC_PMEM4_MEMHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_PMEM4_MEMHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_PMEM4_MEMHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_PMEM4_MEMHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ -#define FSMC_PMEM4_MEMHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ -#define FSMC_PMEM4_MEMHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ -#define FSMC_PMEM4_MEMHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ -#define FSMC_PMEM4_MEMHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ - -#define FSMC_PMEM4_MEMHIZ4 ((uint32_t)0xFF000000) /*!< MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */ -#define FSMC_PMEM4_MEMHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_PMEM4_MEMHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_PMEM4_MEMHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_PMEM4_MEMHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ -#define FSMC_PMEM4_MEMHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ -#define FSMC_PMEM4_MEMHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ -#define FSMC_PMEM4_MEMHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ -#define FSMC_PMEM4_MEMHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ - -/****************** Bit definition for FSMC_PATT2 register ******************/ -#define FSMC_PATT2_ATTSET2 ((uint32_t)0x000000FF) /*!< ATTSET2[7:0] bits (Attribute memory 2 setup time) */ -#define FSMC_PATT2_ATTSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_PATT2_ATTSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_PATT2_ATTSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_PATT2_ATTSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define FSMC_PATT2_ATTSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ -#define FSMC_PATT2_ATTSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ -#define FSMC_PATT2_ATTSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ -#define FSMC_PATT2_ATTSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ - -#define FSMC_PATT2_ATTWAIT2 ((uint32_t)0x0000FF00) /*!< ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */ -#define FSMC_PATT2_ATTWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_PATT2_ATTWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_PATT2_ATTWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_PATT2_ATTWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ -#define FSMC_PATT2_ATTWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ -#define FSMC_PATT2_ATTWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ -#define FSMC_PATT2_ATTWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ -#define FSMC_PATT2_ATTWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ - -#define FSMC_PATT2_ATTHOLD2 ((uint32_t)0x00FF0000) /*!< ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */ -#define FSMC_PATT2_ATTHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_PATT2_ATTHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_PATT2_ATTHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_PATT2_ATTHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ -#define FSMC_PATT2_ATTHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ -#define FSMC_PATT2_ATTHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ -#define FSMC_PATT2_ATTHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ -#define FSMC_PATT2_ATTHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ - -#define FSMC_PATT2_ATTHIZ2 ((uint32_t)0xFF000000) /*!< ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */ -#define FSMC_PATT2_ATTHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_PATT2_ATTHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_PATT2_ATTHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_PATT2_ATTHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ -#define FSMC_PATT2_ATTHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ -#define FSMC_PATT2_ATTHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ -#define FSMC_PATT2_ATTHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ -#define FSMC_PATT2_ATTHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ - -/****************** Bit definition for FSMC_PATT3 register ******************/ -#define FSMC_PATT3_ATTSET3 ((uint32_t)0x000000FF) /*!< ATTSET3[7:0] bits (Attribute memory 3 setup time) */ -#define FSMC_PATT3_ATTSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_PATT3_ATTSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_PATT3_ATTSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_PATT3_ATTSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define FSMC_PATT3_ATTSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ -#define FSMC_PATT3_ATTSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ -#define FSMC_PATT3_ATTSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ -#define FSMC_PATT3_ATTSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ - -#define FSMC_PATT3_ATTWAIT3 ((uint32_t)0x0000FF00) /*!< ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */ -#define FSMC_PATT3_ATTWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_PATT3_ATTWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_PATT3_ATTWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_PATT3_ATTWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ -#define FSMC_PATT3_ATTWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ -#define FSMC_PATT3_ATTWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ -#define FSMC_PATT3_ATTWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ -#define FSMC_PATT3_ATTWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ - -#define FSMC_PATT3_ATTHOLD3 ((uint32_t)0x00FF0000) /*!< ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */ -#define FSMC_PATT3_ATTHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_PATT3_ATTHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_PATT3_ATTHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_PATT3_ATTHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ -#define FSMC_PATT3_ATTHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ -#define FSMC_PATT3_ATTHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ -#define FSMC_PATT3_ATTHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ -#define FSMC_PATT3_ATTHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ - -#define FSMC_PATT3_ATTHIZ3 ((uint32_t)0xFF000000) /*!< ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */ -#define FSMC_PATT3_ATTHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_PATT3_ATTHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_PATT3_ATTHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_PATT3_ATTHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ -#define FSMC_PATT3_ATTHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ -#define FSMC_PATT3_ATTHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ -#define FSMC_PATT3_ATTHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ -#define FSMC_PATT3_ATTHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ - -/****************** Bit definition for FSMC_PATT4 register ******************/ -#define FSMC_PATT4_ATTSET4 ((uint32_t)0x000000FF) /*!< ATTSET4[7:0] bits (Attribute memory 4 setup time) */ -#define FSMC_PATT4_ATTSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_PATT4_ATTSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_PATT4_ATTSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_PATT4_ATTSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define FSMC_PATT4_ATTSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ -#define FSMC_PATT4_ATTSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ -#define FSMC_PATT4_ATTSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ -#define FSMC_PATT4_ATTSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ - -#define FSMC_PATT4_ATTWAIT4 ((uint32_t)0x0000FF00) /*!< ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */ -#define FSMC_PATT4_ATTWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_PATT4_ATTWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_PATT4_ATTWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_PATT4_ATTWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ -#define FSMC_PATT4_ATTWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ -#define FSMC_PATT4_ATTWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ -#define FSMC_PATT4_ATTWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ -#define FSMC_PATT4_ATTWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ - -#define FSMC_PATT4_ATTHOLD4 ((uint32_t)0x00FF0000) /*!< ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */ -#define FSMC_PATT4_ATTHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_PATT4_ATTHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_PATT4_ATTHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_PATT4_ATTHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ -#define FSMC_PATT4_ATTHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ -#define FSMC_PATT4_ATTHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ -#define FSMC_PATT4_ATTHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ -#define FSMC_PATT4_ATTHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ - -#define FSMC_PATT4_ATTHIZ4 ((uint32_t)0xFF000000) /*!< ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */ -#define FSMC_PATT4_ATTHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_PATT4_ATTHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_PATT4_ATTHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_PATT4_ATTHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ -#define FSMC_PATT4_ATTHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ -#define FSMC_PATT4_ATTHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ -#define FSMC_PATT4_ATTHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ -#define FSMC_PATT4_ATTHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ - -/****************** Bit definition for FSMC_PIO4 register *******************/ -#define FSMC_PIO4_IOSET4 ((uint32_t)0x000000FF) /*!< IOSET4[7:0] bits (I/O 4 setup time) */ -#define FSMC_PIO4_IOSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define FSMC_PIO4_IOSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ -#define FSMC_PIO4_IOSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ -#define FSMC_PIO4_IOSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ -#define FSMC_PIO4_IOSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ -#define FSMC_PIO4_IOSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ -#define FSMC_PIO4_IOSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ -#define FSMC_PIO4_IOSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ - -#define FSMC_PIO4_IOWAIT4 ((uint32_t)0x0000FF00) /*!< IOWAIT4[7:0] bits (I/O 4 wait time) */ -#define FSMC_PIO4_IOWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define FSMC_PIO4_IOWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define FSMC_PIO4_IOWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ -#define FSMC_PIO4_IOWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ -#define FSMC_PIO4_IOWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ -#define FSMC_PIO4_IOWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ -#define FSMC_PIO4_IOWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ -#define FSMC_PIO4_IOWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ - -#define FSMC_PIO4_IOHOLD4 ((uint32_t)0x00FF0000) /*!< IOHOLD4[7:0] bits (I/O 4 hold time) */ -#define FSMC_PIO4_IOHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define FSMC_PIO4_IOHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define FSMC_PIO4_IOHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define FSMC_PIO4_IOHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ -#define FSMC_PIO4_IOHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ -#define FSMC_PIO4_IOHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ -#define FSMC_PIO4_IOHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ -#define FSMC_PIO4_IOHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ - -#define FSMC_PIO4_IOHIZ4 ((uint32_t)0xFF000000) /*!< IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */ -#define FSMC_PIO4_IOHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define FSMC_PIO4_IOHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define FSMC_PIO4_IOHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ -#define FSMC_PIO4_IOHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ -#define FSMC_PIO4_IOHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ -#define FSMC_PIO4_IOHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ -#define FSMC_PIO4_IOHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ -#define FSMC_PIO4_IOHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ - -/****************** Bit definition for FSMC_ECCR2 register ******************/ -#define FSMC_ECCR2_ECC2 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ - -/****************** Bit definition for FSMC_ECCR3 register ******************/ -#define FSMC_ECCR3_ECC3 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ - -/******************************************************************************/ -/* */ -/* SD host Interface */ -/* */ -/******************************************************************************/ - -/****************** Bit definition for SDIO_POWER register ******************/ -#define SDIO_POWER_PWRCTRL ((uint8_t)0x03) /*!< PWRCTRL[1:0] bits (Power supply control bits) */ -#define SDIO_POWER_PWRCTRL_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define SDIO_POWER_PWRCTRL_1 ((uint8_t)0x02) /*!< Bit 1 */ - -/****************** Bit definition for SDIO_CLKCR register ******************/ -#define SDIO_CLKCR_CLKDIV ((uint16_t)0x00FF) /*!< Clock divide factor */ -#define SDIO_CLKCR_CLKEN ((uint16_t)0x0100) /*!< Clock enable bit */ -#define SDIO_CLKCR_PWRSAV ((uint16_t)0x0200) /*!< Power saving configuration bit */ -#define SDIO_CLKCR_BYPASS ((uint16_t)0x0400) /*!< Clock divider bypass enable bit */ - -#define SDIO_CLKCR_WIDBUS ((uint16_t)0x1800) /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */ -#define SDIO_CLKCR_WIDBUS_0 ((uint16_t)0x0800) /*!< Bit 0 */ -#define SDIO_CLKCR_WIDBUS_1 ((uint16_t)0x1000) /*!< Bit 1 */ - -#define SDIO_CLKCR_NEGEDGE ((uint16_t)0x2000) /*!< SDIO_CK dephasing selection bit */ -#define SDIO_CLKCR_HWFC_EN ((uint16_t)0x4000) /*!< HW Flow Control enable */ - -/******************* Bit definition for SDIO_ARG register *******************/ -#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!< Command argument */ - -/******************* Bit definition for SDIO_CMD register *******************/ -#define SDIO_CMD_CMDINDEX ((uint16_t)0x003F) /*!< Command Index */ - -#define SDIO_CMD_WAITRESP ((uint16_t)0x00C0) /*!< WAITRESP[1:0] bits (Wait for response bits) */ -#define SDIO_CMD_WAITRESP_0 ((uint16_t)0x0040) /*!< Bit 0 */ -#define SDIO_CMD_WAITRESP_1 ((uint16_t)0x0080) /*!< Bit 1 */ - -#define SDIO_CMD_WAITINT ((uint16_t)0x0100) /*!< CPSM Waits for Interrupt Request */ -#define SDIO_CMD_WAITPEND ((uint16_t)0x0200) /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */ -#define SDIO_CMD_CPSMEN ((uint16_t)0x0400) /*!< Command path state machine (CPSM) Enable bit */ -#define SDIO_CMD_SDIOSUSPEND ((uint16_t)0x0800) /*!< SD I/O suspend command */ -#define SDIO_CMD_ENCMDCOMPL ((uint16_t)0x1000) /*!< Enable CMD completion */ -#define SDIO_CMD_NIEN ((uint16_t)0x2000) /*!< Not Interrupt Enable */ -#define SDIO_CMD_CEATACMD ((uint16_t)0x4000) /*!< CE-ATA command */ - -/***************** Bit definition for SDIO_RESPCMD register *****************/ -#define SDIO_RESPCMD_RESPCMD ((uint8_t)0x3F) /*!< Response command index */ - -/****************** Bit definition for SDIO_RESP0 register ******************/ -#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ - -/****************** Bit definition for SDIO_RESP1 register ******************/ -#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ - -/****************** Bit definition for SDIO_RESP2 register ******************/ -#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ - -/****************** Bit definition for SDIO_RESP3 register ******************/ -#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ - -/****************** Bit definition for SDIO_RESP4 register ******************/ -#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ - -/****************** Bit definition for SDIO_DTIMER register *****************/ -#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!< Data timeout period. */ - -/****************** Bit definition for SDIO_DLEN register *******************/ -#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!< Data length value */ - -/****************** Bit definition for SDIO_DCTRL register ******************/ -#define SDIO_DCTRL_DTEN ((uint16_t)0x0001) /*!< Data transfer enabled bit */ -#define SDIO_DCTRL_DTDIR ((uint16_t)0x0002) /*!< Data transfer direction selection */ -#define SDIO_DCTRL_DTMODE ((uint16_t)0x0004) /*!< Data transfer mode selection */ -#define SDIO_DCTRL_DMAEN ((uint16_t)0x0008) /*!< DMA enabled bit */ - -#define SDIO_DCTRL_DBLOCKSIZE ((uint16_t)0x00F0) /*!< DBLOCKSIZE[3:0] bits (Data block size) */ -#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint16_t)0x0020) /*!< Bit 1 */ -#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint16_t)0x0040) /*!< Bit 2 */ -#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint16_t)0x0080) /*!< Bit 3 */ - -#define SDIO_DCTRL_RWSTART ((uint16_t)0x0100) /*!< Read wait start */ -#define SDIO_DCTRL_RWSTOP ((uint16_t)0x0200) /*!< Read wait stop */ -#define SDIO_DCTRL_RWMOD ((uint16_t)0x0400) /*!< Read wait mode */ -#define SDIO_DCTRL_SDIOEN ((uint16_t)0x0800) /*!< SD I/O enable functions */ - -/****************** Bit definition for SDIO_DCOUNT register *****************/ -#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!< Data count value */ - -/****************** Bit definition for SDIO_STA register ********************/ -#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!< Command response received (CRC check failed) */ -#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!< Data block sent/received (CRC check failed) */ -#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!< Command response timeout */ -#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!< Data timeout */ -#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!< Transmit FIFO underrun error */ -#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!< Received FIFO overrun error */ -#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!< Command response received (CRC check passed) */ -#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!< Command sent (no response required) */ -#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!< Data end (data counter, SDIDCOUNT, is zero) */ -#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!< Start bit not detected on all data signals in wide bus mode */ -#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!< Data block sent/received (CRC check passed) */ -#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!< Command transfer in progress */ -#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!< Data transmit in progress */ -#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!< Data receive in progress */ -#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */ -#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */ -#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!< Transmit FIFO full */ -#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!< Receive FIFO full */ -#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!< Transmit FIFO empty */ -#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!< Receive FIFO empty */ -#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!< Data available in transmit FIFO */ -#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!< Data available in receive FIFO */ -#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!< SDIO interrupt received */ -#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received for CMD61 */ - -/******************* Bit definition for SDIO_ICR register *******************/ -#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!< CCRCFAIL flag clear bit */ -#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!< DCRCFAIL flag clear bit */ -#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!< CTIMEOUT flag clear bit */ -#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!< DTIMEOUT flag clear bit */ -#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!< TXUNDERR flag clear bit */ -#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!< RXOVERR flag clear bit */ -#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!< CMDREND flag clear bit */ -#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!< CMDSENT flag clear bit */ -#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!< DATAEND flag clear bit */ -#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!< STBITERR flag clear bit */ -#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!< DBCKEND flag clear bit */ -#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!< SDIOIT flag clear bit */ -#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!< CEATAEND flag clear bit */ - -/****************** Bit definition for SDIO_MASK register *******************/ -#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!< Command CRC Fail Interrupt Enable */ -#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!< Data CRC Fail Interrupt Enable */ -#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!< Command TimeOut Interrupt Enable */ -#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!< Data TimeOut Interrupt Enable */ -#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!< Tx FIFO UnderRun Error Interrupt Enable */ -#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!< Rx FIFO OverRun Error Interrupt Enable */ -#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!< Command Response Received Interrupt Enable */ -#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!< Command Sent Interrupt Enable */ -#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!< Data End Interrupt Enable */ -#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!< Start Bit Error Interrupt Enable */ -#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!< Data Block End Interrupt Enable */ -#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!< Command Acting Interrupt Enable */ -#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!< Data Transmit Acting Interrupt Enable */ -#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!< Data receive acting interrupt enabled */ -#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!< Tx FIFO Half Empty interrupt Enable */ -#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!< Rx FIFO Half Full interrupt Enable */ -#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!< Tx FIFO Full interrupt Enable */ -#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!< Rx FIFO Full interrupt Enable */ -#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!< Tx FIFO Empty interrupt Enable */ -#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!< Rx FIFO Empty interrupt Enable */ -#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!< Data available in Tx FIFO interrupt Enable */ -#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!< Data available in Rx FIFO interrupt Enable */ -#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!< SDIO Mode Interrupt Received interrupt Enable */ -#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received Interrupt Enable */ - -/***************** Bit definition for SDIO_FIFOCNT register *****************/ -#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!< Remaining number of words to be written to or read from the FIFO */ - -/****************** Bit definition for SDIO_FIFO register *******************/ -#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!< Receive and transmit FIFO data */ - -/******************************************************************************/ -/* */ -/* USB Device FS */ -/* */ -/******************************************************************************/ - -/*!< Endpoint-specific registers */ -/******************* Bit definition for USB_EP0R register *******************/ -#define USB_EP0R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ - -#define USB_EP0R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP0R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define USB_EP0R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ - -#define USB_EP0R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ -#define USB_EP0R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ -#define USB_EP0R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ - -#define USB_EP0R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP0R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ -#define USB_EP0R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ - -#define USB_EP0R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ - -#define USB_EP0R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP0R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define USB_EP0R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define USB_EP0R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ -#define USB_EP0R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP1R register *******************/ -#define USB_EP1R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ - -#define USB_EP1R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP1R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define USB_EP1R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ - -#define USB_EP1R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ -#define USB_EP1R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ -#define USB_EP1R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ - -#define USB_EP1R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP1R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ -#define USB_EP1R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ - -#define USB_EP1R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ - -#define USB_EP1R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP1R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define USB_EP1R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define USB_EP1R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ -#define USB_EP1R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP2R register *******************/ -#define USB_EP2R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ - -#define USB_EP2R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP2R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define USB_EP2R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ - -#define USB_EP2R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ -#define USB_EP2R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ -#define USB_EP2R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ - -#define USB_EP2R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP2R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ -#define USB_EP2R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ - -#define USB_EP2R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ - -#define USB_EP2R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP2R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define USB_EP2R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define USB_EP2R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ -#define USB_EP2R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP3R register *******************/ -#define USB_EP3R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ - -#define USB_EP3R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP3R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define USB_EP3R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ - -#define USB_EP3R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ -#define USB_EP3R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ -#define USB_EP3R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ - -#define USB_EP3R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP3R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ -#define USB_EP3R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ - -#define USB_EP3R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ - -#define USB_EP3R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP3R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define USB_EP3R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define USB_EP3R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ -#define USB_EP3R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP4R register *******************/ -#define USB_EP4R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ - -#define USB_EP4R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP4R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define USB_EP4R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ - -#define USB_EP4R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ -#define USB_EP4R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ -#define USB_EP4R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ - -#define USB_EP4R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP4R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ -#define USB_EP4R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ - -#define USB_EP4R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ - -#define USB_EP4R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP4R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define USB_EP4R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define USB_EP4R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ -#define USB_EP4R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP5R register *******************/ -#define USB_EP5R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ - -#define USB_EP5R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP5R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define USB_EP5R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ - -#define USB_EP5R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ -#define USB_EP5R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ -#define USB_EP5R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ - -#define USB_EP5R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP5R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ -#define USB_EP5R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ - -#define USB_EP5R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ - -#define USB_EP5R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP5R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define USB_EP5R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define USB_EP5R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ -#define USB_EP5R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP6R register *******************/ -#define USB_EP6R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ - -#define USB_EP6R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP6R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define USB_EP6R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ - -#define USB_EP6R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ -#define USB_EP6R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ -#define USB_EP6R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ - -#define USB_EP6R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP6R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ -#define USB_EP6R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ - -#define USB_EP6R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ - -#define USB_EP6R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP6R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define USB_EP6R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define USB_EP6R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ -#define USB_EP6R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP7R register *******************/ -#define USB_EP7R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ - -#define USB_EP7R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP7R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define USB_EP7R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ - -#define USB_EP7R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ -#define USB_EP7R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ -#define USB_EP7R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ - -#define USB_EP7R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP7R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ -#define USB_EP7R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ - -#define USB_EP7R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ - -#define USB_EP7R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP7R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define USB_EP7R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define USB_EP7R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ -#define USB_EP7R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ - -/*!< Common registers */ -/******************* Bit definition for USB_CNTR register *******************/ -#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB Reset */ -#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power down */ -#define USB_CNTR_LP_MODE ((uint16_t)0x0004) /*!< Low-power mode */ -#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force suspend */ -#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< Resume request */ -#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Interrupt Mask */ -#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Interrupt Mask */ -#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Interrupt Mask */ -#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< Suspend mode Interrupt Mask */ -#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< Wakeup Interrupt Mask */ -#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< Error Interrupt Mask */ -#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun Interrupt Mask */ -#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct Transfer Interrupt Mask */ - -/******************* Bit definition for USB_ISTR register *******************/ -#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< Endpoint Identifier */ -#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< Direction of transaction */ -#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame */ -#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame */ -#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< USB RESET request */ -#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< Suspend mode request */ -#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< Wake up */ -#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< Error */ -#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun */ -#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct Transfer */ - -/******************* Bit definition for USB_FNR register ********************/ -#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */ -#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */ -#define USB_FNR_LCK ((uint16_t)0x2000) /*!< Locked */ -#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< Receive Data - Line Status */ -#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< Receive Data + Line Status */ - -/****************** Bit definition for USB_DADDR register *******************/ -#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< ADD[6:0] bits (Device Address) */ -#define USB_DADDR_ADD0 ((uint8_t)0x01) /*!< Bit 0 */ -#define USB_DADDR_ADD1 ((uint8_t)0x02) /*!< Bit 1 */ -#define USB_DADDR_ADD2 ((uint8_t)0x04) /*!< Bit 2 */ -#define USB_DADDR_ADD3 ((uint8_t)0x08) /*!< Bit 3 */ -#define USB_DADDR_ADD4 ((uint8_t)0x10) /*!< Bit 4 */ -#define USB_DADDR_ADD5 ((uint8_t)0x20) /*!< Bit 5 */ -#define USB_DADDR_ADD6 ((uint8_t)0x40) /*!< Bit 6 */ - -#define USB_DADDR_EF ((uint8_t)0x80) /*!< Enable Function */ - -/****************** Bit definition for USB_BTABLE register ******************/ -#define USB_BTABLE_BTABLE ((uint16_t)0xFFF8) /*!< Buffer Table */ - -/*!< Buffer descriptor table */ -/***************** Bit definition for USB_ADDR0_TX register *****************/ -#define USB_ADDR0_TX_ADDR0_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 0 */ - -/***************** Bit definition for USB_ADDR1_TX register *****************/ -#define USB_ADDR1_TX_ADDR1_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 1 */ - -/***************** Bit definition for USB_ADDR2_TX register *****************/ -#define USB_ADDR2_TX_ADDR2_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 2 */ - -/***************** Bit definition for USB_ADDR3_TX register *****************/ -#define USB_ADDR3_TX_ADDR3_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 3 */ - -/***************** Bit definition for USB_ADDR4_TX register *****************/ -#define USB_ADDR4_TX_ADDR4_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 4 */ - -/***************** Bit definition for USB_ADDR5_TX register *****************/ -#define USB_ADDR5_TX_ADDR5_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 5 */ - -/***************** Bit definition for USB_ADDR6_TX register *****************/ -#define USB_ADDR6_TX_ADDR6_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 6 */ - -/***************** Bit definition for USB_ADDR7_TX register *****************/ -#define USB_ADDR7_TX_ADDR7_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 7 */ - -/*----------------------------------------------------------------------------*/ - -/***************** Bit definition for USB_COUNT0_TX register ****************/ -#define USB_COUNT0_TX_COUNT0_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 0 */ - -/***************** Bit definition for USB_COUNT1_TX register ****************/ -#define USB_COUNT1_TX_COUNT1_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 1 */ - -/***************** Bit definition for USB_COUNT2_TX register ****************/ -#define USB_COUNT2_TX_COUNT2_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 2 */ - -/***************** Bit definition for USB_COUNT3_TX register ****************/ -#define USB_COUNT3_TX_COUNT3_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 3 */ - -/***************** Bit definition for USB_COUNT4_TX register ****************/ -#define USB_COUNT4_TX_COUNT4_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 4 */ - -/***************** Bit definition for USB_COUNT5_TX register ****************/ -#define USB_COUNT5_TX_COUNT5_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 5 */ - -/***************** Bit definition for USB_COUNT6_TX register ****************/ -#define USB_COUNT6_TX_COUNT6_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 6 */ - -/***************** Bit definition for USB_COUNT7_TX register ****************/ -#define USB_COUNT7_TX_COUNT7_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 7 */ - -/*----------------------------------------------------------------------------*/ - -/**************** Bit definition for USB_COUNT0_TX_0 register ***************/ -#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */ - -/**************** Bit definition for USB_COUNT0_TX_1 register ***************/ -#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */ - -/**************** Bit definition for USB_COUNT1_TX_0 register ***************/ -#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */ - -/**************** Bit definition for USB_COUNT1_TX_1 register ***************/ -#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */ - -/**************** Bit definition for USB_COUNT2_TX_0 register ***************/ -#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */ - -/**************** Bit definition for USB_COUNT2_TX_1 register ***************/ -#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */ - -/**************** Bit definition for USB_COUNT3_TX_0 register ***************/ -#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint16_t)0x000003FF) /*!< Transmission Byte Count 3 (low) */ - -/**************** Bit definition for USB_COUNT3_TX_1 register ***************/ -#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint16_t)0x03FF0000) /*!< Transmission Byte Count 3 (high) */ - -/**************** Bit definition for USB_COUNT4_TX_0 register ***************/ -#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */ - -/**************** Bit definition for USB_COUNT4_TX_1 register ***************/ -#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */ - -/**************** Bit definition for USB_COUNT5_TX_0 register ***************/ -#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */ - -/**************** Bit definition for USB_COUNT5_TX_1 register ***************/ -#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */ - -/**************** Bit definition for USB_COUNT6_TX_0 register ***************/ -#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */ - -/**************** Bit definition for USB_COUNT6_TX_1 register ***************/ -#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */ - -/**************** Bit definition for USB_COUNT7_TX_0 register ***************/ -#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */ - -/**************** Bit definition for USB_COUNT7_TX_1 register ***************/ -#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */ - -/*----------------------------------------------------------------------------*/ - -/***************** Bit definition for USB_ADDR0_RX register *****************/ -#define USB_ADDR0_RX_ADDR0_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 0 */ - -/***************** Bit definition for USB_ADDR1_RX register *****************/ -#define USB_ADDR1_RX_ADDR1_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 1 */ - -/***************** Bit definition for USB_ADDR2_RX register *****************/ -#define USB_ADDR2_RX_ADDR2_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 2 */ - -/***************** Bit definition for USB_ADDR3_RX register *****************/ -#define USB_ADDR3_RX_ADDR3_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 3 */ - -/***************** Bit definition for USB_ADDR4_RX register *****************/ -#define USB_ADDR4_RX_ADDR4_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 4 */ - -/***************** Bit definition for USB_ADDR5_RX register *****************/ -#define USB_ADDR5_RX_ADDR5_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 5 */ - -/***************** Bit definition for USB_ADDR6_RX register *****************/ -#define USB_ADDR6_RX_ADDR6_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 6 */ - -/***************** Bit definition for USB_ADDR7_RX register *****************/ -#define USB_ADDR7_RX_ADDR7_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 7 */ - -/*----------------------------------------------------------------------------*/ - -/***************** Bit definition for USB_COUNT0_RX register ****************/ -#define USB_COUNT0_RX_COUNT0_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ - -#define USB_COUNT0_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT0_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define USB_COUNT0_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ -#define USB_COUNT0_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ -#define USB_COUNT0_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ -#define USB_COUNT0_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ - -#define USB_COUNT0_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT1_RX register ****************/ -#define USB_COUNT1_RX_COUNT1_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ - -#define USB_COUNT1_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT1_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define USB_COUNT1_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ -#define USB_COUNT1_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ -#define USB_COUNT1_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ -#define USB_COUNT1_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ - -#define USB_COUNT1_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT2_RX register ****************/ -#define USB_COUNT2_RX_COUNT2_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ - -#define USB_COUNT2_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT2_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define USB_COUNT2_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ -#define USB_COUNT2_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ -#define USB_COUNT2_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ -#define USB_COUNT2_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ - -#define USB_COUNT2_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT3_RX register ****************/ -#define USB_COUNT3_RX_COUNT3_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ - -#define USB_COUNT3_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT3_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define USB_COUNT3_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ -#define USB_COUNT3_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ -#define USB_COUNT3_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ -#define USB_COUNT3_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ - -#define USB_COUNT3_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT4_RX register ****************/ -#define USB_COUNT4_RX_COUNT4_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ - -#define USB_COUNT4_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT4_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define USB_COUNT4_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ -#define USB_COUNT4_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ -#define USB_COUNT4_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ -#define USB_COUNT4_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ - -#define USB_COUNT4_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT5_RX register ****************/ -#define USB_COUNT5_RX_COUNT5_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ - -#define USB_COUNT5_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT5_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define USB_COUNT5_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ -#define USB_COUNT5_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ -#define USB_COUNT5_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ -#define USB_COUNT5_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ - -#define USB_COUNT5_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT6_RX register ****************/ -#define USB_COUNT6_RX_COUNT6_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ - -#define USB_COUNT6_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT6_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define USB_COUNT6_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ -#define USB_COUNT6_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ -#define USB_COUNT6_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ -#define USB_COUNT6_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ - -#define USB_COUNT6_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT7_RX register ****************/ -#define USB_COUNT7_RX_COUNT7_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ - -#define USB_COUNT7_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT7_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define USB_COUNT7_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ -#define USB_COUNT7_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ -#define USB_COUNT7_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ -#define USB_COUNT7_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ - -#define USB_COUNT7_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ - -/*----------------------------------------------------------------------------*/ - -/**************** Bit definition for USB_COUNT0_RX_0 register ***************/ -#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT0_RX_1 register ***************/ -#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/**************** Bit definition for USB_COUNT1_RX_0 register ***************/ -#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT1_RX_1 register ***************/ -#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/**************** Bit definition for USB_COUNT2_RX_0 register ***************/ -#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT2_RX_1 register ***************/ -#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/**************** Bit definition for USB_COUNT3_RX_0 register ***************/ -#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT3_RX_1 register ***************/ -#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/**************** Bit definition for USB_COUNT4_RX_0 register ***************/ -#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT4_RX_1 register ***************/ -#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/**************** Bit definition for USB_COUNT5_RX_0 register ***************/ -#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT5_RX_1 register ***************/ -#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/*************** Bit definition for USB_COUNT6_RX_0 register ***************/ -#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT6_RX_1 register ***************/ -#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/*************** Bit definition for USB_COUNT7_RX_0 register ****************/ -#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/*************** Bit definition for USB_COUNT7_RX_1 register ****************/ -#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/******************************************************************************/ -/* */ -/* Controller Area Network */ -/* */ -/******************************************************************************/ - -/*!< CAN control and status registers */ -/******************* Bit definition for CAN_MCR register ********************/ -#define CAN_MCR_INRQ ((uint16_t)0x0001) /*!< Initialization Request */ -#define CAN_MCR_SLEEP ((uint16_t)0x0002) /*!< Sleep Mode Request */ -#define CAN_MCR_TXFP ((uint16_t)0x0004) /*!< Transmit FIFO Priority */ -#define CAN_MCR_RFLM ((uint16_t)0x0008) /*!< Receive FIFO Locked Mode */ -#define CAN_MCR_NART ((uint16_t)0x0010) /*!< No Automatic Retransmission */ -#define CAN_MCR_AWUM ((uint16_t)0x0020) /*!< Automatic Wakeup Mode */ -#define CAN_MCR_ABOM ((uint16_t)0x0040) /*!< Automatic Bus-Off Management */ -#define CAN_MCR_TTCM ((uint16_t)0x0080) /*!< Time Triggered Communication Mode */ -#define CAN_MCR_RESET ((uint16_t)0x8000) /*!< CAN software master reset */ - -/******************* Bit definition for CAN_MSR register ********************/ -#define CAN_MSR_INAK ((uint16_t)0x0001) /*!< Initialization Acknowledge */ -#define CAN_MSR_SLAK ((uint16_t)0x0002) /*!< Sleep Acknowledge */ -#define CAN_MSR_ERRI ((uint16_t)0x0004) /*!< Error Interrupt */ -#define CAN_MSR_WKUI ((uint16_t)0x0008) /*!< Wakeup Interrupt */ -#define CAN_MSR_SLAKI ((uint16_t)0x0010) /*!< Sleep Acknowledge Interrupt */ -#define CAN_MSR_TXM ((uint16_t)0x0100) /*!< Transmit Mode */ -#define CAN_MSR_RXM ((uint16_t)0x0200) /*!< Receive Mode */ -#define CAN_MSR_SAMP ((uint16_t)0x0400) /*!< Last Sample Point */ -#define CAN_MSR_RX ((uint16_t)0x0800) /*!< CAN Rx Signal */ - -/******************* Bit definition for CAN_TSR register ********************/ -#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!< Request Completed Mailbox0 */ -#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!< Transmission OK of Mailbox0 */ -#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!< Arbitration Lost for Mailbox0 */ -#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!< Transmission Error of Mailbox0 */ -#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!< Abort Request for Mailbox0 */ -#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!< Request Completed Mailbox1 */ -#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!< Transmission OK of Mailbox1 */ -#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!< Arbitration Lost for Mailbox1 */ -#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!< Transmission Error of Mailbox1 */ -#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!< Abort Request for Mailbox 1 */ -#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!< Request Completed Mailbox2 */ -#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!< Transmission OK of Mailbox 2 */ -#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!< Arbitration Lost for mailbox 2 */ -#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!< Transmission Error of Mailbox 2 */ -#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!< Abort Request for Mailbox 2 */ -#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!< Mailbox Code */ - -#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!< TME[2:0] bits */ -#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!< Transmit Mailbox 0 Empty */ -#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!< Transmit Mailbox 1 Empty */ -#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!< Transmit Mailbox 2 Empty */ - -#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!< LOW[2:0] bits */ -#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!< Lowest Priority Flag for Mailbox 0 */ -#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!< Lowest Priority Flag for Mailbox 1 */ -#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!< Lowest Priority Flag for Mailbox 2 */ - -/******************* Bit definition for CAN_RF0R register *******************/ -#define CAN_RF0R_FMP0 ((uint8_t)0x03) /*!< FIFO 0 Message Pending */ -#define CAN_RF0R_FULL0 ((uint8_t)0x08) /*!< FIFO 0 Full */ -#define CAN_RF0R_FOVR0 ((uint8_t)0x10) /*!< FIFO 0 Overrun */ -#define CAN_RF0R_RFOM0 ((uint8_t)0x20) /*!< Release FIFO 0 Output Mailbox */ - -/******************* Bit definition for CAN_RF1R register *******************/ -#define CAN_RF1R_FMP1 ((uint8_t)0x03) /*!< FIFO 1 Message Pending */ -#define CAN_RF1R_FULL1 ((uint8_t)0x08) /*!< FIFO 1 Full */ -#define CAN_RF1R_FOVR1 ((uint8_t)0x10) /*!< FIFO 1 Overrun */ -#define CAN_RF1R_RFOM1 ((uint8_t)0x20) /*!< Release FIFO 1 Output Mailbox */ - -/******************** Bit definition for CAN_IER register *******************/ -#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!< Transmit Mailbox Empty Interrupt Enable */ -#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!< FIFO Message Pending Interrupt Enable */ -#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!< FIFO Full Interrupt Enable */ -#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!< FIFO Overrun Interrupt Enable */ -#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!< FIFO Message Pending Interrupt Enable */ -#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!< FIFO Full Interrupt Enable */ -#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!< FIFO Overrun Interrupt Enable */ -#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!< Error Warning Interrupt Enable */ -#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!< Error Passive Interrupt Enable */ -#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!< Bus-Off Interrupt Enable */ -#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!< Last Error Code Interrupt Enable */ -#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!< Error Interrupt Enable */ -#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!< Wakeup Interrupt Enable */ -#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!< Sleep Interrupt Enable */ - -/******************** Bit definition for CAN_ESR register *******************/ -#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!< Error Warning Flag */ -#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!< Error Passive Flag */ -#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!< Bus-Off Flag */ - -#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!< LEC[2:0] bits (Last Error Code) */ -#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!< Bit 2 */ - -#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!< Least significant byte of the 9-bit Transmit Error Counter */ -#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!< Receive Error Counter */ - -/******************* Bit definition for CAN_BTR register ********************/ -#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!< Baud Rate Prescaler */ -#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!< Time Segment 1 */ -#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!< Time Segment 2 */ -#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!< Resynchronization Jump Width */ -#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!< Loop Back Mode (Debug) */ -#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!< Silent Mode */ - -/*!< Mailbox registers */ -/****************** Bit definition for CAN_TI0R register ********************/ -#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ -#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ -#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ -#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ -#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ - -/****************** Bit definition for CAN_TDT0R register *******************/ -#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ -#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ -#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ - -/****************** Bit definition for CAN_TDL0R register *******************/ -#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ -#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ -#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ -#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ - -/****************** Bit definition for CAN_TDH0R register *******************/ -#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ -#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ -#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ -#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ - -/******************* Bit definition for CAN_TI1R register *******************/ -#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ -#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ -#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ -#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ -#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ - -/******************* Bit definition for CAN_TDT1R register ******************/ -#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ -#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ -#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ - -/******************* Bit definition for CAN_TDL1R register ******************/ -#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ -#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ -#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ -#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ - -/******************* Bit definition for CAN_TDH1R register ******************/ -#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ -#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ -#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ -#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ - -/******************* Bit definition for CAN_TI2R register *******************/ -#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ -#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ -#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ -#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ -#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ - -/******************* Bit definition for CAN_TDT2R register ******************/ -#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ -#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ -#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ - -/******************* Bit definition for CAN_TDL2R register ******************/ -#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ -#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ -#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ -#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ - -/******************* Bit definition for CAN_TDH2R register ******************/ -#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ -#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ -#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ -#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ - -/******************* Bit definition for CAN_RI0R register *******************/ -#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ -#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ -#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ -#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ - -/******************* Bit definition for CAN_RDT0R register ******************/ -#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ -#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ -#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ - -/******************* Bit definition for CAN_RDL0R register ******************/ -#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ -#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ -#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ -#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ - -/******************* Bit definition for CAN_RDH0R register ******************/ -#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ -#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ -#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ -#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ - -/******************* Bit definition for CAN_RI1R register *******************/ -#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ -#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ -#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ -#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ - -/******************* Bit definition for CAN_RDT1R register ******************/ -#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ -#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ -#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ - -/******************* Bit definition for CAN_RDL1R register ******************/ -#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ -#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ -#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ -#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ - -/******************* Bit definition for CAN_RDH1R register ******************/ -#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ -#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ -#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ -#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ - -/*!< CAN filter registers */ -/******************* Bit definition for CAN_FMR register ********************/ -#define CAN_FMR_FINIT ((uint8_t)0x01) /*!< Filter Init Mode */ - -/******************* Bit definition for CAN_FM1R register *******************/ -#define CAN_FM1R_FBM ((uint16_t)0x3FFF) /*!< Filter Mode */ -#define CAN_FM1R_FBM0 ((uint16_t)0x0001) /*!< Filter Init Mode bit 0 */ -#define CAN_FM1R_FBM1 ((uint16_t)0x0002) /*!< Filter Init Mode bit 1 */ -#define CAN_FM1R_FBM2 ((uint16_t)0x0004) /*!< Filter Init Mode bit 2 */ -#define CAN_FM1R_FBM3 ((uint16_t)0x0008) /*!< Filter Init Mode bit 3 */ -#define CAN_FM1R_FBM4 ((uint16_t)0x0010) /*!< Filter Init Mode bit 4 */ -#define CAN_FM1R_FBM5 ((uint16_t)0x0020) /*!< Filter Init Mode bit 5 */ -#define CAN_FM1R_FBM6 ((uint16_t)0x0040) /*!< Filter Init Mode bit 6 */ -#define CAN_FM1R_FBM7 ((uint16_t)0x0080) /*!< Filter Init Mode bit 7 */ -#define CAN_FM1R_FBM8 ((uint16_t)0x0100) /*!< Filter Init Mode bit 8 */ -#define CAN_FM1R_FBM9 ((uint16_t)0x0200) /*!< Filter Init Mode bit 9 */ -#define CAN_FM1R_FBM10 ((uint16_t)0x0400) /*!< Filter Init Mode bit 10 */ -#define CAN_FM1R_FBM11 ((uint16_t)0x0800) /*!< Filter Init Mode bit 11 */ -#define CAN_FM1R_FBM12 ((uint16_t)0x1000) /*!< Filter Init Mode bit 12 */ -#define CAN_FM1R_FBM13 ((uint16_t)0x2000) /*!< Filter Init Mode bit 13 */ - -/******************* Bit definition for CAN_FS1R register *******************/ -#define CAN_FS1R_FSC ((uint16_t)0x3FFF) /*!< Filter Scale Configuration */ -#define CAN_FS1R_FSC0 ((uint16_t)0x0001) /*!< Filter Scale Configuration bit 0 */ -#define CAN_FS1R_FSC1 ((uint16_t)0x0002) /*!< Filter Scale Configuration bit 1 */ -#define CAN_FS1R_FSC2 ((uint16_t)0x0004) /*!< Filter Scale Configuration bit 2 */ -#define CAN_FS1R_FSC3 ((uint16_t)0x0008) /*!< Filter Scale Configuration bit 3 */ -#define CAN_FS1R_FSC4 ((uint16_t)0x0010) /*!< Filter Scale Configuration bit 4 */ -#define CAN_FS1R_FSC5 ((uint16_t)0x0020) /*!< Filter Scale Configuration bit 5 */ -#define CAN_FS1R_FSC6 ((uint16_t)0x0040) /*!< Filter Scale Configuration bit 6 */ -#define CAN_FS1R_FSC7 ((uint16_t)0x0080) /*!< Filter Scale Configuration bit 7 */ -#define CAN_FS1R_FSC8 ((uint16_t)0x0100) /*!< Filter Scale Configuration bit 8 */ -#define CAN_FS1R_FSC9 ((uint16_t)0x0200) /*!< Filter Scale Configuration bit 9 */ -#define CAN_FS1R_FSC10 ((uint16_t)0x0400) /*!< Filter Scale Configuration bit 10 */ -#define CAN_FS1R_FSC11 ((uint16_t)0x0800) /*!< Filter Scale Configuration bit 11 */ -#define CAN_FS1R_FSC12 ((uint16_t)0x1000) /*!< Filter Scale Configuration bit 12 */ -#define CAN_FS1R_FSC13 ((uint16_t)0x2000) /*!< Filter Scale Configuration bit 13 */ - -/****************** Bit definition for CAN_FFA1R register *******************/ -#define CAN_FFA1R_FFA ((uint16_t)0x3FFF) /*!< Filter FIFO Assignment */ -#define CAN_FFA1R_FFA0 ((uint16_t)0x0001) /*!< Filter FIFO Assignment for Filter 0 */ -#define CAN_FFA1R_FFA1 ((uint16_t)0x0002) /*!< Filter FIFO Assignment for Filter 1 */ -#define CAN_FFA1R_FFA2 ((uint16_t)0x0004) /*!< Filter FIFO Assignment for Filter 2 */ -#define CAN_FFA1R_FFA3 ((uint16_t)0x0008) /*!< Filter FIFO Assignment for Filter 3 */ -#define CAN_FFA1R_FFA4 ((uint16_t)0x0010) /*!< Filter FIFO Assignment for Filter 4 */ -#define CAN_FFA1R_FFA5 ((uint16_t)0x0020) /*!< Filter FIFO Assignment for Filter 5 */ -#define CAN_FFA1R_FFA6 ((uint16_t)0x0040) /*!< Filter FIFO Assignment for Filter 6 */ -#define CAN_FFA1R_FFA7 ((uint16_t)0x0080) /*!< Filter FIFO Assignment for Filter 7 */ -#define CAN_FFA1R_FFA8 ((uint16_t)0x0100) /*!< Filter FIFO Assignment for Filter 8 */ -#define CAN_FFA1R_FFA9 ((uint16_t)0x0200) /*!< Filter FIFO Assignment for Filter 9 */ -#define CAN_FFA1R_FFA10 ((uint16_t)0x0400) /*!< Filter FIFO Assignment for Filter 10 */ -#define CAN_FFA1R_FFA11 ((uint16_t)0x0800) /*!< Filter FIFO Assignment for Filter 11 */ -#define CAN_FFA1R_FFA12 ((uint16_t)0x1000) /*!< Filter FIFO Assignment for Filter 12 */ -#define CAN_FFA1R_FFA13 ((uint16_t)0x2000) /*!< Filter FIFO Assignment for Filter 13 */ - -/******************* Bit definition for CAN_FA1R register *******************/ -#define CAN_FA1R_FACT ((uint16_t)0x3FFF) /*!< Filter Active */ -#define CAN_FA1R_FACT0 ((uint16_t)0x0001) /*!< Filter 0 Active */ -#define CAN_FA1R_FACT1 ((uint16_t)0x0002) /*!< Filter 1 Active */ -#define CAN_FA1R_FACT2 ((uint16_t)0x0004) /*!< Filter 2 Active */ -#define CAN_FA1R_FACT3 ((uint16_t)0x0008) /*!< Filter 3 Active */ -#define CAN_FA1R_FACT4 ((uint16_t)0x0010) /*!< Filter 4 Active */ -#define CAN_FA1R_FACT5 ((uint16_t)0x0020) /*!< Filter 5 Active */ -#define CAN_FA1R_FACT6 ((uint16_t)0x0040) /*!< Filter 6 Active */ -#define CAN_FA1R_FACT7 ((uint16_t)0x0080) /*!< Filter 7 Active */ -#define CAN_FA1R_FACT8 ((uint16_t)0x0100) /*!< Filter 8 Active */ -#define CAN_FA1R_FACT9 ((uint16_t)0x0200) /*!< Filter 9 Active */ -#define CAN_FA1R_FACT10 ((uint16_t)0x0400) /*!< Filter 10 Active */ -#define CAN_FA1R_FACT11 ((uint16_t)0x0800) /*!< Filter 11 Active */ -#define CAN_FA1R_FACT12 ((uint16_t)0x1000) /*!< Filter 12 Active */ -#define CAN_FA1R_FACT13 ((uint16_t)0x2000) /*!< Filter 13 Active */ - -/******************* Bit definition for CAN_F0R1 register *******************/ -#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F1R1 register *******************/ -#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F2R1 register *******************/ -#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F3R1 register *******************/ -#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F4R1 register *******************/ -#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F5R1 register *******************/ -#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F6R1 register *******************/ -#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F7R1 register *******************/ -#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F8R1 register *******************/ -#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F9R1 register *******************/ -#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F10R1 register ******************/ -#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F11R1 register ******************/ -#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F12R1 register ******************/ -#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F13R1 register ******************/ -#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F0R2 register *******************/ -#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F1R2 register *******************/ -#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F2R2 register *******************/ -#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F3R2 register *******************/ -#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F4R2 register *******************/ -#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F5R2 register *******************/ -#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F6R2 register *******************/ -#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F7R2 register *******************/ -#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F8R2 register *******************/ -#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F9R2 register *******************/ -#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F10R2 register ******************/ -#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F11R2 register ******************/ -#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F12R2 register ******************/ -#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F13R2 register ******************/ -#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ -#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ -#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ -#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ -#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ -#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ -#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ -#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ -#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ -#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ -#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ -#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ -#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ -#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ -#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ -#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ -#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ -#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ -#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ -#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ -#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ -#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ -#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ -#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ -#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ -#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ -#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ -#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ -#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ -#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ -#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ -#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ - -/******************************************************************************/ -/* */ -/* Serial Peripheral Interface */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for SPI_CR1 register ********************/ -#define SPI_CR1_CPHA ((uint16_t)0x0001) /*!< Clock Phase */ -#define SPI_CR1_CPOL ((uint16_t)0x0002) /*!< Clock Polarity */ -#define SPI_CR1_MSTR ((uint16_t)0x0004) /*!< Master Selection */ - -#define SPI_CR1_BR ((uint16_t)0x0038) /*!< BR[2:0] bits (Baud Rate Control) */ -#define SPI_CR1_BR_0 ((uint16_t)0x0008) /*!< Bit 0 */ -#define SPI_CR1_BR_1 ((uint16_t)0x0010) /*!< Bit 1 */ -#define SPI_CR1_BR_2 ((uint16_t)0x0020) /*!< Bit 2 */ - -#define SPI_CR1_SPE ((uint16_t)0x0040) /*!< SPI Enable */ -#define SPI_CR1_LSBFIRST ((uint16_t)0x0080) /*!< Frame Format */ -#define SPI_CR1_SSI ((uint16_t)0x0100) /*!< Internal slave select */ -#define SPI_CR1_SSM ((uint16_t)0x0200) /*!< Software slave management */ -#define SPI_CR1_RXONLY ((uint16_t)0x0400) /*!< Receive only */ -#define SPI_CR1_DFF ((uint16_t)0x0800) /*!< Data Frame Format */ -#define SPI_CR1_CRCNEXT ((uint16_t)0x1000) /*!< Transmit CRC next */ -#define SPI_CR1_CRCEN ((uint16_t)0x2000) /*!< Hardware CRC calculation enable */ -#define SPI_CR1_BIDIOE ((uint16_t)0x4000) /*!< Output enable in bidirectional mode */ -#define SPI_CR1_BIDIMODE ((uint16_t)0x8000) /*!< Bidirectional data mode enable */ - -/******************* Bit definition for SPI_CR2 register ********************/ -#define SPI_CR2_RXDMAEN ((uint8_t)0x01) /*!< Rx Buffer DMA Enable */ -#define SPI_CR2_TXDMAEN ((uint8_t)0x02) /*!< Tx Buffer DMA Enable */ -#define SPI_CR2_SSOE ((uint8_t)0x04) /*!< SS Output Enable */ -#define SPI_CR2_ERRIE ((uint8_t)0x20) /*!< Error Interrupt Enable */ -#define SPI_CR2_RXNEIE ((uint8_t)0x40) /*!< RX buffer Not Empty Interrupt Enable */ -#define SPI_CR2_TXEIE ((uint8_t)0x80) /*!< Tx buffer Empty Interrupt Enable */ - -/******************** Bit definition for SPI_SR register ********************/ -#define SPI_SR_RXNE ((uint8_t)0x01) /*!< Receive buffer Not Empty */ -#define SPI_SR_TXE ((uint8_t)0x02) /*!< Transmit buffer Empty */ -#define SPI_SR_CHSIDE ((uint8_t)0x04) /*!< Channel side */ -#define SPI_SR_UDR ((uint8_t)0x08) /*!< Underrun flag */ -#define SPI_SR_CRCERR ((uint8_t)0x10) /*!< CRC Error flag */ -#define SPI_SR_MODF ((uint8_t)0x20) /*!< Mode fault */ -#define SPI_SR_OVR ((uint8_t)0x40) /*!< Overrun flag */ -#define SPI_SR_BSY ((uint8_t)0x80) /*!< Busy flag */ - -/******************** Bit definition for SPI_DR register ********************/ -#define SPI_DR_DR ((uint16_t)0xFFFF) /*!< Data Register */ - -/******************* Bit definition for SPI_CRCPR register ******************/ -#define SPI_CRCPR_CRCPOLY ((uint16_t)0xFFFF) /*!< CRC polynomial register */ - -/****************** Bit definition for SPI_RXCRCR register ******************/ -#define SPI_RXCRCR_RXCRC ((uint16_t)0xFFFF) /*!< Rx CRC Register */ - -/****************** Bit definition for SPI_TXCRCR register ******************/ -#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!< Tx CRC Register */ - -/****************** Bit definition for SPI_I2SCFGR register *****************/ -#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!< Channel length (number of bits per audio channel) */ - -#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!< DATLEN[1:0] bits (Data length to be transferred) */ -#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!< Bit 0 */ -#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!< Bit 1 */ - -#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!< steady state clock polarity */ - -#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!< I2SSTD[1:0] bits (I2S standard selection) */ -#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!< Bit 0 */ -#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!< Bit 1 */ - -#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!< PCM frame synchronization */ - -#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!< I2SCFG[1:0] bits (I2S configuration mode) */ -#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!< I2S Enable */ -#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!< I2S mode selection */ - -/****************** Bit definition for SPI_I2SPR register *******************/ -#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!< I2S Linear prescaler */ -#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!< Odd factor for the prescaler */ -#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!< Master Clock Output Enable */ - -/******************************************************************************/ -/* */ -/* Inter-integrated Circuit Interface */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for I2C_CR1 register ********************/ -#define I2C_CR1_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ -#define I2C_CR1_SMBUS ((uint16_t)0x0002) /*!< SMBus Mode */ -#define I2C_CR1_SMBTYPE ((uint16_t)0x0008) /*!< SMBus Type */ -#define I2C_CR1_ENARP ((uint16_t)0x0010) /*!< ARP Enable */ -#define I2C_CR1_ENPEC ((uint16_t)0x0020) /*!< PEC Enable */ -#define I2C_CR1_ENGC ((uint16_t)0x0040) /*!< General Call Enable */ -#define I2C_CR1_NOSTRETCH ((uint16_t)0x0080) /*!< Clock Stretching Disable (Slave mode) */ -#define I2C_CR1_START ((uint16_t)0x0100) /*!< Start Generation */ -#define I2C_CR1_STOP ((uint16_t)0x0200) /*!< Stop Generation */ -#define I2C_CR1_ACK ((uint16_t)0x0400) /*!< Acknowledge Enable */ -#define I2C_CR1_POS ((uint16_t)0x0800) /*!< Acknowledge/PEC Position (for data reception) */ -#define I2C_CR1_PEC ((uint16_t)0x1000) /*!< Packet Error Checking */ -#define I2C_CR1_ALERT ((uint16_t)0x2000) /*!< SMBus Alert */ -#define I2C_CR1_SWRST ((uint16_t)0x8000) /*!< Software Reset */ - -/******************* Bit definition for I2C_CR2 register ********************/ -#define I2C_CR2_FREQ ((uint16_t)0x003F) /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */ -#define I2C_CR2_FREQ_0 ((uint16_t)0x0001) /*!< Bit 0 */ -#define I2C_CR2_FREQ_1 ((uint16_t)0x0002) /*!< Bit 1 */ -#define I2C_CR2_FREQ_2 ((uint16_t)0x0004) /*!< Bit 2 */ -#define I2C_CR2_FREQ_3 ((uint16_t)0x0008) /*!< Bit 3 */ -#define I2C_CR2_FREQ_4 ((uint16_t)0x0010) /*!< Bit 4 */ -#define I2C_CR2_FREQ_5 ((uint16_t)0x0020) /*!< Bit 5 */ - -#define I2C_CR2_ITERREN ((uint16_t)0x0100) /*!< Error Interrupt Enable */ -#define I2C_CR2_ITEVTEN ((uint16_t)0x0200) /*!< Event Interrupt Enable */ -#define I2C_CR2_ITBUFEN ((uint16_t)0x0400) /*!< Buffer Interrupt Enable */ -#define I2C_CR2_DMAEN ((uint16_t)0x0800) /*!< DMA Requests Enable */ -#define I2C_CR2_LAST ((uint16_t)0x1000) /*!< DMA Last Transfer */ - -/******************* Bit definition for I2C_OAR1 register *******************/ -#define I2C_OAR1_ADD1_7 ((uint16_t)0x00FE) /*!< Interface Address */ -#define I2C_OAR1_ADD8_9 ((uint16_t)0x0300) /*!< Interface Address */ - -#define I2C_OAR1_ADD0 ((uint16_t)0x0001) /*!< Bit 0 */ -#define I2C_OAR1_ADD1 ((uint16_t)0x0002) /*!< Bit 1 */ -#define I2C_OAR1_ADD2 ((uint16_t)0x0004) /*!< Bit 2 */ -#define I2C_OAR1_ADD3 ((uint16_t)0x0008) /*!< Bit 3 */ -#define I2C_OAR1_ADD4 ((uint16_t)0x0010) /*!< Bit 4 */ -#define I2C_OAR1_ADD5 ((uint16_t)0x0020) /*!< Bit 5 */ -#define I2C_OAR1_ADD6 ((uint16_t)0x0040) /*!< Bit 6 */ -#define I2C_OAR1_ADD7 ((uint16_t)0x0080) /*!< Bit 7 */ -#define I2C_OAR1_ADD8 ((uint16_t)0x0100) /*!< Bit 8 */ -#define I2C_OAR1_ADD9 ((uint16_t)0x0200) /*!< Bit 9 */ - -#define I2C_OAR1_ADDMODE ((uint16_t)0x8000) /*!< Addressing Mode (Slave mode) */ - -/******************* Bit definition for I2C_OAR2 register *******************/ -#define I2C_OAR2_ENDUAL ((uint8_t)0x01) /*!< Dual addressing mode enable */ -#define I2C_OAR2_ADD2 ((uint8_t)0xFE) /*!< Interface address */ - -/******************** Bit definition for I2C_DR register ********************/ -#define I2C_DR_DR ((uint8_t)0xFF) /*!< 8-bit Data Register */ - -/******************* Bit definition for I2C_SR1 register ********************/ -#define I2C_SR1_SB ((uint16_t)0x0001) /*!< Start Bit (Master mode) */ -#define I2C_SR1_ADDR ((uint16_t)0x0002) /*!< Address sent (master mode)/matched (slave mode) */ -#define I2C_SR1_BTF ((uint16_t)0x0004) /*!< Byte Transfer Finished */ -#define I2C_SR1_ADD10 ((uint16_t)0x0008) /*!< 10-bit header sent (Master mode) */ -#define I2C_SR1_STOPF ((uint16_t)0x0010) /*!< Stop detection (Slave mode) */ -#define I2C_SR1_RXNE ((uint16_t)0x0040) /*!< Data Register not Empty (receivers) */ -#define I2C_SR1_TXE ((uint16_t)0x0080) /*!< Data Register Empty (transmitters) */ -#define I2C_SR1_BERR ((uint16_t)0x0100) /*!< Bus Error */ -#define I2C_SR1_ARLO ((uint16_t)0x0200) /*!< Arbitration Lost (master mode) */ -#define I2C_SR1_AF ((uint16_t)0x0400) /*!< Acknowledge Failure */ -#define I2C_SR1_OVR ((uint16_t)0x0800) /*!< Overrun/Underrun */ -#define I2C_SR1_PECERR ((uint16_t)0x1000) /*!< PEC Error in reception */ -#define I2C_SR1_TIMEOUT ((uint16_t)0x4000) /*!< Timeout or Tlow Error */ -#define I2C_SR1_SMBALERT ((uint16_t)0x8000) /*!< SMBus Alert */ - -/******************* Bit definition for I2C_SR2 register ********************/ -#define I2C_SR2_MSL ((uint16_t)0x0001) /*!< Master/Slave */ -#define I2C_SR2_BUSY ((uint16_t)0x0002) /*!< Bus Busy */ -#define I2C_SR2_TRA ((uint16_t)0x0004) /*!< Transmitter/Receiver */ -#define I2C_SR2_GENCALL ((uint16_t)0x0010) /*!< General Call Address (Slave mode) */ -#define I2C_SR2_SMBDEFAULT ((uint16_t)0x0020) /*!< SMBus Device Default Address (Slave mode) */ -#define I2C_SR2_SMBHOST ((uint16_t)0x0040) /*!< SMBus Host Header (Slave mode) */ -#define I2C_SR2_DUALF ((uint16_t)0x0080) /*!< Dual Flag (Slave mode) */ -#define I2C_SR2_PEC ((uint16_t)0xFF00) /*!< Packet Error Checking Register */ - -/******************* Bit definition for I2C_CCR register ********************/ -#define I2C_CCR_CCR ((uint16_t)0x0FFF) /*!< Clock Control Register in Fast/Standard mode (Master mode) */ -#define I2C_CCR_DUTY ((uint16_t)0x4000) /*!< Fast Mode Duty Cycle */ -#define I2C_CCR_FS ((uint16_t)0x8000) /*!< I2C Master Mode Selection */ - -/****************** Bit definition for I2C_TRISE register *******************/ -#define I2C_TRISE_TRISE ((uint8_t)0x3F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */ - -/******************************************************************************/ -/* */ -/* Universal Synchronous Asynchronous Receiver Transmitter */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for USART_SR register *******************/ -#define USART_SR_PE ((uint16_t)0x0001) /*!< Parity Error */ -#define USART_SR_FE ((uint16_t)0x0002) /*!< Framing Error */ -#define USART_SR_NE ((uint16_t)0x0004) /*!< Noise Error Flag */ -#define USART_SR_ORE ((uint16_t)0x0008) /*!< OverRun Error */ -#define USART_SR_IDLE ((uint16_t)0x0010) /*!< IDLE line detected */ -#define USART_SR_RXNE ((uint16_t)0x0020) /*!< Read Data Register Not Empty */ -#define USART_SR_TC ((uint16_t)0x0040) /*!< Transmission Complete */ -#define USART_SR_TXE ((uint16_t)0x0080) /*!< Transmit Data Register Empty */ -#define USART_SR_LBD ((uint16_t)0x0100) /*!< LIN Break Detection Flag */ -#define USART_SR_CTS ((uint16_t)0x0200) /*!< CTS Flag */ - -/******************* Bit definition for USART_DR register *******************/ -#define USART_DR_DR ((uint16_t)0x01FF) /*!< Data value */ - -/****************** Bit definition for USART_BRR register *******************/ -#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /*!< Fraction of USARTDIV */ -#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /*!< Mantissa of USARTDIV */ - -/****************** Bit definition for USART_CR1 register *******************/ -#define USART_CR1_SBK ((uint16_t)0x0001) /*!< Send Break */ -#define USART_CR1_RWU ((uint16_t)0x0002) /*!< Receiver wakeup */ -#define USART_CR1_RE ((uint16_t)0x0004) /*!< Receiver Enable */ -#define USART_CR1_TE ((uint16_t)0x0008) /*!< Transmitter Enable */ -#define USART_CR1_IDLEIE ((uint16_t)0x0010) /*!< IDLE Interrupt Enable */ -#define USART_CR1_RXNEIE ((uint16_t)0x0020) /*!< RXNE Interrupt Enable */ -#define USART_CR1_TCIE ((uint16_t)0x0040) /*!< Transmission Complete Interrupt Enable */ -#define USART_CR1_TXEIE ((uint16_t)0x0080) /*!< PE Interrupt Enable */ -#define USART_CR1_PEIE ((uint16_t)0x0100) /*!< PE Interrupt Enable */ -#define USART_CR1_PS ((uint16_t)0x0200) /*!< Parity Selection */ -#define USART_CR1_PCE ((uint16_t)0x0400) /*!< Parity Control Enable */ -#define USART_CR1_WAKE ((uint16_t)0x0800) /*!< Wakeup method */ -#define USART_CR1_M ((uint16_t)0x1000) /*!< Word length */ -#define USART_CR1_UE ((uint16_t)0x2000) /*!< USART Enable */ -#define USART_CR1_OVER8 ((uint16_t)0x8000) /*!< USART Oversmapling 8-bits */ - -/****************** Bit definition for USART_CR2 register *******************/ -#define USART_CR2_ADD ((uint16_t)0x000F) /*!< Address of the USART node */ -#define USART_CR2_LBDL ((uint16_t)0x0020) /*!< LIN Break Detection Length */ -#define USART_CR2_LBDIE ((uint16_t)0x0040) /*!< LIN Break Detection Interrupt Enable */ -#define USART_CR2_LBCL ((uint16_t)0x0100) /*!< Last Bit Clock pulse */ -#define USART_CR2_CPHA ((uint16_t)0x0200) /*!< Clock Phase */ -#define USART_CR2_CPOL ((uint16_t)0x0400) /*!< Clock Polarity */ -#define USART_CR2_CLKEN ((uint16_t)0x0800) /*!< Clock Enable */ - -#define USART_CR2_STOP ((uint16_t)0x3000) /*!< STOP[1:0] bits (STOP bits) */ -#define USART_CR2_STOP_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define USART_CR2_STOP_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define USART_CR2_LINEN ((uint16_t)0x4000) /*!< LIN mode enable */ - -/****************** Bit definition for USART_CR3 register *******************/ -#define USART_CR3_EIE ((uint16_t)0x0001) /*!< Error Interrupt Enable */ -#define USART_CR3_IREN ((uint16_t)0x0002) /*!< IrDA mode Enable */ -#define USART_CR3_IRLP ((uint16_t)0x0004) /*!< IrDA Low-Power */ -#define USART_CR3_HDSEL ((uint16_t)0x0008) /*!< Half-Duplex Selection */ -#define USART_CR3_NACK ((uint16_t)0x0010) /*!< Smartcard NACK enable */ -#define USART_CR3_SCEN ((uint16_t)0x0020) /*!< Smartcard mode enable */ -#define USART_CR3_DMAR ((uint16_t)0x0040) /*!< DMA Enable Receiver */ -#define USART_CR3_DMAT ((uint16_t)0x0080) /*!< DMA Enable Transmitter */ -#define USART_CR3_RTSE ((uint16_t)0x0100) /*!< RTS Enable */ -#define USART_CR3_CTSE ((uint16_t)0x0200) /*!< CTS Enable */ -#define USART_CR3_CTSIE ((uint16_t)0x0400) /*!< CTS Interrupt Enable */ -#define USART_CR3_ONEBIT ((uint16_t)0x0800) /*!< One Bit method */ - -/****************** Bit definition for USART_GTPR register ******************/ -#define USART_GTPR_PSC ((uint16_t)0x00FF) /*!< PSC[7:0] bits (Prescaler value) */ -#define USART_GTPR_PSC_0 ((uint16_t)0x0001) /*!< Bit 0 */ -#define USART_GTPR_PSC_1 ((uint16_t)0x0002) /*!< Bit 1 */ -#define USART_GTPR_PSC_2 ((uint16_t)0x0004) /*!< Bit 2 */ -#define USART_GTPR_PSC_3 ((uint16_t)0x0008) /*!< Bit 3 */ -#define USART_GTPR_PSC_4 ((uint16_t)0x0010) /*!< Bit 4 */ -#define USART_GTPR_PSC_5 ((uint16_t)0x0020) /*!< Bit 5 */ -#define USART_GTPR_PSC_6 ((uint16_t)0x0040) /*!< Bit 6 */ -#define USART_GTPR_PSC_7 ((uint16_t)0x0080) /*!< Bit 7 */ - -#define USART_GTPR_GT ((uint16_t)0xFF00) /*!< Guard time value */ - -/******************************************************************************/ -/* */ -/* Debug MCU */ -/* */ -/******************************************************************************/ - -/**************** Bit definition for DBGMCU_IDCODE register *****************/ -#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */ - -#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */ -#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */ -#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */ -#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */ -#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */ -#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */ -#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */ -#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */ -#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */ -#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */ -#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */ -#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */ -#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */ -#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */ -#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */ -#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */ - -/****************** Bit definition for DBGMCU_CR register *******************/ -#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001) /*!< Debug Sleep Mode */ -#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */ -#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */ -#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020) /*!< Trace Pin Assignment Control */ - -#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0) /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */ -#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -#define DBGMCU_CR_DBG_IWDG_STOP ((uint32_t)0x00000100) /*!< Debug Independent Watchdog stopped when Core is halted */ -#define DBGMCU_CR_DBG_WWDG_STOP ((uint32_t)0x00000200) /*!< Debug Window Watchdog stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM1_STOP ((uint32_t)0x00000400) /*!< TIM1 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM2_STOP ((uint32_t)0x00000800) /*!< TIM2 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM3_STOP ((uint32_t)0x00001000) /*!< TIM3 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM4_STOP ((uint32_t)0x00002000) /*!< TIM4 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_CAN1_STOP ((uint32_t)0x00004000) /*!< Debug CAN1 stopped when Core is halted */ -#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) /*!< SMBUS timeout mode stopped when Core is halted */ -#define DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) /*!< SMBUS timeout mode stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM8_STOP ((uint32_t)0x00020000) /*!< TIM8 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM5_STOP ((uint32_t)0x00040000) /*!< TIM5 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM6_STOP ((uint32_t)0x00080000) /*!< TIM6 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM7_STOP ((uint32_t)0x00100000) /*!< TIM7 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_CAN2_STOP ((uint32_t)0x00200000) /*!< Debug CAN2 stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM15_STOP ((uint32_t)0x00400000) /*!< Debug TIM15 stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM16_STOP ((uint32_t)0x00800000) /*!< Debug TIM16 stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM17_STOP ((uint32_t)0x01000000) /*!< Debug TIM17 stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM12_STOP ((uint32_t)0x02000000) /*!< Debug TIM12 stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM13_STOP ((uint32_t)0x04000000) /*!< Debug TIM13 stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM14_STOP ((uint32_t)0x08000000) /*!< Debug TIM14 stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM9_STOP ((uint32_t)0x10000000) /*!< Debug TIM9 stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM10_STOP ((uint32_t)0x20000000) /*!< Debug TIM10 stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM11_STOP ((uint32_t)0x40000000) /*!< Debug TIM11 stopped when Core is halted */ - -/******************************************************************************/ -/* */ -/* FLASH and Option Bytes Registers */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for FLASH_ACR register ******************/ -#define FLASH_ACR_LATENCY ((uint8_t)0x03) /*!< LATENCY[2:0] bits (Latency) */ -#define FLASH_ACR_LATENCY_0 ((uint8_t)0x00) /*!< Bit 0 */ -#define FLASH_ACR_LATENCY_1 ((uint8_t)0x01) /*!< Bit 0 */ -#define FLASH_ACR_LATENCY_2 ((uint8_t)0x02) /*!< Bit 1 */ - -#define FLASH_ACR_HLFCYA ((uint8_t)0x08) /*!< Flash Half Cycle Access Enable */ -#define FLASH_ACR_PRFTBE ((uint8_t)0x10) /*!< Prefetch Buffer Enable */ -#define FLASH_ACR_PRFTBS ((uint8_t)0x20) /*!< Prefetch Buffer Status */ - -/****************** Bit definition for FLASH_KEYR register ******************/ -#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */ - -/***************** Bit definition for FLASH_OPTKEYR register ****************/ -#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */ - -/****************** Bit definition for FLASH_SR register *******************/ -#define FLASH_SR_BSY ((uint8_t)0x01) /*!< Busy */ -#define FLASH_SR_PGERR ((uint8_t)0x04) /*!< Programming Error */ -#define FLASH_SR_WRPRTERR ((uint8_t)0x10) /*!< Write Protection Error */ -#define FLASH_SR_EOP ((uint8_t)0x20) /*!< End of operation */ - -/******************* Bit definition for FLASH_CR register *******************/ -#define FLASH_CR_PG ((uint16_t)0x0001) /*!< Programming */ -#define FLASH_CR_PER ((uint16_t)0x0002) /*!< Page Erase */ -#define FLASH_CR_MER ((uint16_t)0x0004) /*!< Mass Erase */ -#define FLASH_CR_OPTPG ((uint16_t)0x0010) /*!< Option Byte Programming */ -#define FLASH_CR_OPTER ((uint16_t)0x0020) /*!< Option Byte Erase */ -#define FLASH_CR_STRT ((uint16_t)0x0040) /*!< Start */ -#define FLASH_CR_LOCK ((uint16_t)0x0080) /*!< Lock */ -#define FLASH_CR_OPTWRE ((uint16_t)0x0200) /*!< Option Bytes Write Enable */ -#define FLASH_CR_ERRIE ((uint16_t)0x0400) /*!< Error Interrupt Enable */ -#define FLASH_CR_EOPIE ((uint16_t)0x1000) /*!< End of operation interrupt enable */ - -/******************* Bit definition for FLASH_AR register *******************/ -#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */ - -/****************** Bit definition for FLASH_OBR register *******************/ -#define FLASH_OBR_OPTERR ((uint16_t)0x0001) /*!< Option Byte Error */ -#define FLASH_OBR_RDPRT ((uint16_t)0x0002) /*!< Read protection */ - -#define FLASH_OBR_USER ((uint16_t)0x03FC) /*!< User Option Bytes */ -#define FLASH_OBR_WDG_SW ((uint16_t)0x0004) /*!< WDG_SW */ -#define FLASH_OBR_nRST_STOP ((uint16_t)0x0008) /*!< nRST_STOP */ -#define FLASH_OBR_nRST_STDBY ((uint16_t)0x0010) /*!< nRST_STDBY */ -#define FLASH_OBR_BFB2 ((uint16_t)0x0020) /*!< BFB2 */ - -/****************** Bit definition for FLASH_WRPR register ******************/ -#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */ - -/*----------------------------------------------------------------------------*/ - -/****************** Bit definition for FLASH_RDP register *******************/ -#define FLASH_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */ -#define FLASH_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */ - -/****************** Bit definition for FLASH_USER register ******************/ -#define FLASH_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */ -#define FLASH_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */ - -/****************** Bit definition for FLASH_Data0 register *****************/ -#define FLASH_Data0_Data0 ((uint32_t)0x000000FF) /*!< User data storage option byte */ -#define FLASH_Data0_nData0 ((uint32_t)0x0000FF00) /*!< User data storage complemented option byte */ - -/****************** Bit definition for FLASH_Data1 register *****************/ -#define FLASH_Data1_Data1 ((uint32_t)0x00FF0000) /*!< User data storage option byte */ -#define FLASH_Data1_nData1 ((uint32_t)0xFF000000) /*!< User data storage complemented option byte */ - -/****************** Bit definition for FLASH_WRP0 register ******************/ -#define FLASH_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ -#define FLASH_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ - -/****************** Bit definition for FLASH_WRP1 register ******************/ -#define FLASH_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ -#define FLASH_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ - -/****************** Bit definition for FLASH_WRP2 register ******************/ -#define FLASH_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ -#define FLASH_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ - -/****************** Bit definition for FLASH_WRP3 register ******************/ -#define FLASH_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ -#define FLASH_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ - -#ifdef STM32F10X_CL -/******************************************************************************/ -/* Ethernet MAC Registers bits definitions */ -/******************************************************************************/ -/* Bit definition for Ethernet MAC Control Register register */ -#define ETH_MACCR_WD ((uint32_t)0x00800000) /* Watchdog disable */ -#define ETH_MACCR_JD ((uint32_t)0x00400000) /* Jabber disable */ -#define ETH_MACCR_IFG ((uint32_t)0x000E0000) /* Inter-frame gap */ - #define ETH_MACCR_IFG_96Bit ((uint32_t)0x00000000) /* Minimum IFG between frames during transmission is 96Bit */ - #define ETH_MACCR_IFG_88Bit ((uint32_t)0x00020000) /* Minimum IFG between frames during transmission is 88Bit */ - #define ETH_MACCR_IFG_80Bit ((uint32_t)0x00040000) /* Minimum IFG between frames during transmission is 80Bit */ - #define ETH_MACCR_IFG_72Bit ((uint32_t)0x00060000) /* Minimum IFG between frames during transmission is 72Bit */ - #define ETH_MACCR_IFG_64Bit ((uint32_t)0x00080000) /* Minimum IFG between frames during transmission is 64Bit */ - #define ETH_MACCR_IFG_56Bit ((uint32_t)0x000A0000) /* Minimum IFG between frames during transmission is 56Bit */ - #define ETH_MACCR_IFG_48Bit ((uint32_t)0x000C0000) /* Minimum IFG between frames during transmission is 48Bit */ - #define ETH_MACCR_IFG_40Bit ((uint32_t)0x000E0000) /* Minimum IFG between frames during transmission is 40Bit */ -#define ETH_MACCR_CSD ((uint32_t)0x00010000) /* Carrier sense disable (during transmission) */ -#define ETH_MACCR_FES ((uint32_t)0x00004000) /* Fast ethernet speed */ -#define ETH_MACCR_ROD ((uint32_t)0x00002000) /* Receive own disable */ -#define ETH_MACCR_LM ((uint32_t)0x00001000) /* loopback mode */ -#define ETH_MACCR_DM ((uint32_t)0x00000800) /* Duplex mode */ -#define ETH_MACCR_IPCO ((uint32_t)0x00000400) /* IP Checksum offload */ -#define ETH_MACCR_RD ((uint32_t)0x00000200) /* Retry disable */ -#define ETH_MACCR_APCS ((uint32_t)0x00000080) /* Automatic Pad/CRC stripping */ -#define ETH_MACCR_BL ((uint32_t)0x00000060) /* Back-off limit: random integer number (r) of slot time delays before rescheduling - a transmission attempt during retries after a collision: 0 =< r <2^k */ - #define ETH_MACCR_BL_10 ((uint32_t)0x00000000) /* k = min (n, 10) */ - #define ETH_MACCR_BL_8 ((uint32_t)0x00000020) /* k = min (n, 8) */ - #define ETH_MACCR_BL_4 ((uint32_t)0x00000040) /* k = min (n, 4) */ - #define ETH_MACCR_BL_1 ((uint32_t)0x00000060) /* k = min (n, 1) */ -#define ETH_MACCR_DC ((uint32_t)0x00000010) /* Defferal check */ -#define ETH_MACCR_TE ((uint32_t)0x00000008) /* Transmitter enable */ -#define ETH_MACCR_RE ((uint32_t)0x00000004) /* Receiver enable */ - -/* Bit definition for Ethernet MAC Frame Filter Register */ -#define ETH_MACFFR_RA ((uint32_t)0x80000000) /* Receive all */ -#define ETH_MACFFR_HPF ((uint32_t)0x00000400) /* Hash or perfect filter */ -#define ETH_MACFFR_SAF ((uint32_t)0x00000200) /* Source address filter enable */ -#define ETH_MACFFR_SAIF ((uint32_t)0x00000100) /* SA inverse filtering */ -#define ETH_MACFFR_PCF ((uint32_t)0x000000C0) /* Pass control frames: 3 cases */ - #define ETH_MACFFR_PCF_BlockAll ((uint32_t)0x00000040) /* MAC filters all control frames from reaching the application */ - #define ETH_MACFFR_PCF_ForwardAll ((uint32_t)0x00000080) /* MAC forwards all control frames to application even if they fail the Address Filter */ - #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0) /* MAC forwards control frames that pass the Address Filter. */ -#define ETH_MACFFR_BFD ((uint32_t)0x00000020) /* Broadcast frame disable */ -#define ETH_MACFFR_PAM ((uint32_t)0x00000010) /* Pass all mutlicast */ -#define ETH_MACFFR_DAIF ((uint32_t)0x00000008) /* DA Inverse filtering */ -#define ETH_MACFFR_HM ((uint32_t)0x00000004) /* Hash multicast */ -#define ETH_MACFFR_HU ((uint32_t)0x00000002) /* Hash unicast */ -#define ETH_MACFFR_PM ((uint32_t)0x00000001) /* Promiscuous mode */ - -/* Bit definition for Ethernet MAC Hash Table High Register */ -#define ETH_MACHTHR_HTH ((uint32_t)0xFFFFFFFF) /* Hash table high */ - -/* Bit definition for Ethernet MAC Hash Table Low Register */ -#define ETH_MACHTLR_HTL ((uint32_t)0xFFFFFFFF) /* Hash table low */ - -/* Bit definition for Ethernet MAC MII Address Register */ -#define ETH_MACMIIAR_PA ((uint32_t)0x0000F800) /* Physical layer address */ -#define ETH_MACMIIAR_MR ((uint32_t)0x000007C0) /* MII register in the selected PHY */ -#define ETH_MACMIIAR_CR ((uint32_t)0x0000001C) /* CR clock range: 6 cases */ - #define ETH_MACMIIAR_CR_Div42 ((uint32_t)0x00000000) /* HCLK:60-72 MHz; MDC clock= HCLK/42 */ - #define ETH_MACMIIAR_CR_Div16 ((uint32_t)0x00000008) /* HCLK:20-35 MHz; MDC clock= HCLK/16 */ - #define ETH_MACMIIAR_CR_Div26 ((uint32_t)0x0000000C) /* HCLK:35-60 MHz; MDC clock= HCLK/26 */ -#define ETH_MACMIIAR_MW ((uint32_t)0x00000002) /* MII write */ -#define ETH_MACMIIAR_MB ((uint32_t)0x00000001) /* MII busy */ - -/* Bit definition for Ethernet MAC MII Data Register */ -#define ETH_MACMIIDR_MD ((uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */ - -/* Bit definition for Ethernet MAC Flow Control Register */ -#define ETH_MACFCR_PT ((uint32_t)0xFFFF0000) /* Pause time */ -#define ETH_MACFCR_ZQPD ((uint32_t)0x00000080) /* Zero-quanta pause disable */ -#define ETH_MACFCR_PLT ((uint32_t)0x00000030) /* Pause low threshold: 4 cases */ - #define ETH_MACFCR_PLT_Minus4 ((uint32_t)0x00000000) /* Pause time minus 4 slot times */ - #define ETH_MACFCR_PLT_Minus28 ((uint32_t)0x00000010) /* Pause time minus 28 slot times */ - #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020) /* Pause time minus 144 slot times */ - #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030) /* Pause time minus 256 slot times */ -#define ETH_MACFCR_UPFD ((uint32_t)0x00000008) /* Unicast pause frame detect */ -#define ETH_MACFCR_RFCE ((uint32_t)0x00000004) /* Receive flow control enable */ -#define ETH_MACFCR_TFCE ((uint32_t)0x00000002) /* Transmit flow control enable */ -#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001) /* Flow control busy/backpressure activate */ - -/* Bit definition for Ethernet MAC VLAN Tag Register */ -#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000) /* 12-bit VLAN tag comparison */ -#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF) /* VLAN tag identifier (for receive frames) */ - -/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */ -#define ETH_MACRWUFFR_D ((uint32_t)0xFFFFFFFF) /* Wake-up frame filter register data */ -/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers. - Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */ -/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask - Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask - Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask - Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask - Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command - - RSVD - Filter1 Command - RSVD - Filter0 Command - Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset - Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16 - Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */ - -/* Bit definition for Ethernet MAC PMT Control and Status Register */ -#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000) /* Wake-Up Frame Filter Register Pointer Reset */ -#define ETH_MACPMTCSR_GU ((uint32_t)0x00000200) /* Global Unicast */ -#define ETH_MACPMTCSR_WFR ((uint32_t)0x00000040) /* Wake-Up Frame Received */ -#define ETH_MACPMTCSR_MPR ((uint32_t)0x00000020) /* Magic Packet Received */ -#define ETH_MACPMTCSR_WFE ((uint32_t)0x00000004) /* Wake-Up Frame Enable */ -#define ETH_MACPMTCSR_MPE ((uint32_t)0x00000002) /* Magic Packet Enable */ -#define ETH_MACPMTCSR_PD ((uint32_t)0x00000001) /* Power Down */ - -/* Bit definition for Ethernet MAC Status Register */ -#define ETH_MACSR_TSTS ((uint32_t)0x00000200) /* Time stamp trigger status */ -#define ETH_MACSR_MMCTS ((uint32_t)0x00000040) /* MMC transmit status */ -#define ETH_MACSR_MMMCRS ((uint32_t)0x00000020) /* MMC receive status */ -#define ETH_MACSR_MMCS ((uint32_t)0x00000010) /* MMC status */ -#define ETH_MACSR_PMTS ((uint32_t)0x00000008) /* PMT status */ - -/* Bit definition for Ethernet MAC Interrupt Mask Register */ -#define ETH_MACIMR_TSTIM ((uint32_t)0x00000200) /* Time stamp trigger interrupt mask */ -#define ETH_MACIMR_PMTIM ((uint32_t)0x00000008) /* PMT interrupt mask */ - -/* Bit definition for Ethernet MAC Address0 High Register */ -#define ETH_MACA0HR_MACA0H ((uint32_t)0x0000FFFF) /* MAC address0 high */ - -/* Bit definition for Ethernet MAC Address0 Low Register */ -#define ETH_MACA0LR_MACA0L ((uint32_t)0xFFFFFFFF) /* MAC address0 low */ - -/* Bit definition for Ethernet MAC Address1 High Register */ -#define ETH_MACA1HR_AE ((uint32_t)0x80000000) /* Address enable */ -#define ETH_MACA1HR_SA ((uint32_t)0x40000000) /* Source address */ -#define ETH_MACA1HR_MBC ((uint32_t)0x3F000000) /* Mask byte control: bits to mask for comparison of the MAC Address bytes */ - #define ETH_MACA1HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ - #define ETH_MACA1HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ - #define ETH_MACA1HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ - #define ETH_MACA1HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ - #define ETH_MACA1HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ - #define ETH_MACA1HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [7:0] */ -#define ETH_MACA1HR_MACA1H ((uint32_t)0x0000FFFF) /* MAC address1 high */ - -/* Bit definition for Ethernet MAC Address1 Low Register */ -#define ETH_MACA1LR_MACA1L ((uint32_t)0xFFFFFFFF) /* MAC address1 low */ - -/* Bit definition for Ethernet MAC Address2 High Register */ -#define ETH_MACA2HR_AE ((uint32_t)0x80000000) /* Address enable */ -#define ETH_MACA2HR_SA ((uint32_t)0x40000000) /* Source address */ -#define ETH_MACA2HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ - #define ETH_MACA2HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ - #define ETH_MACA2HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ - #define ETH_MACA2HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ - #define ETH_MACA2HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ - #define ETH_MACA2HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ - #define ETH_MACA2HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ -#define ETH_MACA2HR_MACA2H ((uint32_t)0x0000FFFF) /* MAC address1 high */ - -/* Bit definition for Ethernet MAC Address2 Low Register */ -#define ETH_MACA2LR_MACA2L ((uint32_t)0xFFFFFFFF) /* MAC address2 low */ - -/* Bit definition for Ethernet MAC Address3 High Register */ -#define ETH_MACA3HR_AE ((uint32_t)0x80000000) /* Address enable */ -#define ETH_MACA3HR_SA ((uint32_t)0x40000000) /* Source address */ -#define ETH_MACA3HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ - #define ETH_MACA3HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ - #define ETH_MACA3HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ - #define ETH_MACA3HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ - #define ETH_MACA3HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ - #define ETH_MACA3HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ - #define ETH_MACA3HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ -#define ETH_MACA3HR_MACA3H ((uint32_t)0x0000FFFF) /* MAC address3 high */ - -/* Bit definition for Ethernet MAC Address3 Low Register */ -#define ETH_MACA3LR_MACA3L ((uint32_t)0xFFFFFFFF) /* MAC address3 low */ - -/******************************************************************************/ -/* Ethernet MMC Registers bits definition */ -/******************************************************************************/ - -/* Bit definition for Ethernet MMC Contol Register */ -#define ETH_MMCCR_MCF ((uint32_t)0x00000008) /* MMC Counter Freeze */ -#define ETH_MMCCR_ROR ((uint32_t)0x00000004) /* Reset on Read */ -#define ETH_MMCCR_CSR ((uint32_t)0x00000002) /* Counter Stop Rollover */ -#define ETH_MMCCR_CR ((uint32_t)0x00000001) /* Counters Reset */ - -/* Bit definition for Ethernet MMC Receive Interrupt Register */ -#define ETH_MMCRIR_RGUFS ((uint32_t)0x00020000) /* Set when Rx good unicast frames counter reaches half the maximum value */ -#define ETH_MMCRIR_RFAES ((uint32_t)0x00000040) /* Set when Rx alignment error counter reaches half the maximum value */ -#define ETH_MMCRIR_RFCES ((uint32_t)0x00000020) /* Set when Rx crc error counter reaches half the maximum value */ - -/* Bit definition for Ethernet MMC Transmit Interrupt Register */ -#define ETH_MMCTIR_TGFS ((uint32_t)0x00200000) /* Set when Tx good frame count counter reaches half the maximum value */ -#define ETH_MMCTIR_TGFMSCS ((uint32_t)0x00008000) /* Set when Tx good multi col counter reaches half the maximum value */ -#define ETH_MMCTIR_TGFSCS ((uint32_t)0x00004000) /* Set when Tx good single col counter reaches half the maximum value */ - -/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */ -#define ETH_MMCRIMR_RGUFM ((uint32_t)0x00020000) /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */ -#define ETH_MMCRIMR_RFAEM ((uint32_t)0x00000040) /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */ -#define ETH_MMCRIMR_RFCEM ((uint32_t)0x00000020) /* Mask the interrupt when Rx crc error counter reaches half the maximum value */ - -/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */ -#define ETH_MMCTIMR_TGFM ((uint32_t)0x00200000) /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */ -#define ETH_MMCTIMR_TGFMSCM ((uint32_t)0x00008000) /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */ -#define ETH_MMCTIMR_TGFSCM ((uint32_t)0x00004000) /* Mask the interrupt when Tx good single col counter reaches half the maximum value */ - -/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */ -#define ETH_MMCTGFSCCR_TGFSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */ - -/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */ -#define ETH_MMCTGFMSCCR_TGFMSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */ - -/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */ -#define ETH_MMCTGFCR_TGFC ((uint32_t)0xFFFFFFFF) /* Number of good frames transmitted. */ - -/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */ -#define ETH_MMCRFCECR_RFCEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with CRC error. */ - -/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */ -#define ETH_MMCRFAECR_RFAEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with alignment (dribble) error */ - -/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */ -#define ETH_MMCRGUFCR_RGUFC ((uint32_t)0xFFFFFFFF) /* Number of good unicast frames received. */ - -/******************************************************************************/ -/* Ethernet PTP Registers bits definition */ -/******************************************************************************/ - -/* Bit definition for Ethernet PTP Time Stamp Contol Register */ -#define ETH_PTPTSCR_TSARU ((uint32_t)0x00000020) /* Addend register update */ -#define ETH_PTPTSCR_TSITE ((uint32_t)0x00000010) /* Time stamp interrupt trigger enable */ -#define ETH_PTPTSCR_TSSTU ((uint32_t)0x00000008) /* Time stamp update */ -#define ETH_PTPTSCR_TSSTI ((uint32_t)0x00000004) /* Time stamp initialize */ -#define ETH_PTPTSCR_TSFCU ((uint32_t)0x00000002) /* Time stamp fine or coarse update */ -#define ETH_PTPTSCR_TSE ((uint32_t)0x00000001) /* Time stamp enable */ - -/* Bit definition for Ethernet PTP Sub-Second Increment Register */ -#define ETH_PTPSSIR_STSSI ((uint32_t)0x000000FF) /* System time Sub-second increment value */ - -/* Bit definition for Ethernet PTP Time Stamp High Register */ -#define ETH_PTPTSHR_STS ((uint32_t)0xFFFFFFFF) /* System Time second */ - -/* Bit definition for Ethernet PTP Time Stamp Low Register */ -#define ETH_PTPTSLR_STPNS ((uint32_t)0x80000000) /* System Time Positive or negative time */ -#define ETH_PTPTSLR_STSS ((uint32_t)0x7FFFFFFF) /* System Time sub-seconds */ - -/* Bit definition for Ethernet PTP Time Stamp High Update Register */ -#define ETH_PTPTSHUR_TSUS ((uint32_t)0xFFFFFFFF) /* Time stamp update seconds */ - -/* Bit definition for Ethernet PTP Time Stamp Low Update Register */ -#define ETH_PTPTSLUR_TSUPNS ((uint32_t)0x80000000) /* Time stamp update Positive or negative time */ -#define ETH_PTPTSLUR_TSUSS ((uint32_t)0x7FFFFFFF) /* Time stamp update sub-seconds */ - -/* Bit definition for Ethernet PTP Time Stamp Addend Register */ -#define ETH_PTPTSAR_TSA ((uint32_t)0xFFFFFFFF) /* Time stamp addend */ - -/* Bit definition for Ethernet PTP Target Time High Register */ -#define ETH_PTPTTHR_TTSH ((uint32_t)0xFFFFFFFF) /* Target time stamp high */ - -/* Bit definition for Ethernet PTP Target Time Low Register */ -#define ETH_PTPTTLR_TTSL ((uint32_t)0xFFFFFFFF) /* Target time stamp low */ - -/******************************************************************************/ -/* Ethernet DMA Registers bits definition */ -/******************************************************************************/ - -/* Bit definition for Ethernet DMA Bus Mode Register */ -#define ETH_DMABMR_AAB ((uint32_t)0x02000000) /* Address-Aligned beats */ -#define ETH_DMABMR_FPM ((uint32_t)0x01000000) /* 4xPBL mode */ -#define ETH_DMABMR_USP ((uint32_t)0x00800000) /* Use separate PBL */ -#define ETH_DMABMR_RDP ((uint32_t)0x007E0000) /* RxDMA PBL */ - #define ETH_DMABMR_RDP_1Beat ((uint32_t)0x00020000) /* maximum number of beats to be transferred in one RxDMA transaction is 1 */ - #define ETH_DMABMR_RDP_2Beat ((uint32_t)0x00040000) /* maximum number of beats to be transferred in one RxDMA transaction is 2 */ - #define ETH_DMABMR_RDP_4Beat ((uint32_t)0x00080000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ - #define ETH_DMABMR_RDP_8Beat ((uint32_t)0x00100000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ - #define ETH_DMABMR_RDP_16Beat ((uint32_t)0x00200000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ - #define ETH_DMABMR_RDP_32Beat ((uint32_t)0x00400000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ - #define ETH_DMABMR_RDP_4xPBL_4Beat ((uint32_t)0x01020000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ - #define ETH_DMABMR_RDP_4xPBL_8Beat ((uint32_t)0x01040000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ - #define ETH_DMABMR_RDP_4xPBL_16Beat ((uint32_t)0x01080000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ - #define ETH_DMABMR_RDP_4xPBL_32Beat ((uint32_t)0x01100000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ - #define ETH_DMABMR_RDP_4xPBL_64Beat ((uint32_t)0x01200000) /* maximum number of beats to be transferred in one RxDMA transaction is 64 */ - #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000) /* maximum number of beats to be transferred in one RxDMA transaction is 128 */ -#define ETH_DMABMR_FB ((uint32_t)0x00010000) /* Fixed Burst */ -#define ETH_DMABMR_RTPR ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ - #define ETH_DMABMR_RTPR_1_1 ((uint32_t)0x00000000) /* Rx Tx priority ratio */ - #define ETH_DMABMR_RTPR_2_1 ((uint32_t)0x00004000) /* Rx Tx priority ratio */ - #define ETH_DMABMR_RTPR_3_1 ((uint32_t)0x00008000) /* Rx Tx priority ratio */ - #define ETH_DMABMR_RTPR_4_1 ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ -#define ETH_DMABMR_PBL ((uint32_t)0x00003F00) /* Programmable burst length */ - #define ETH_DMABMR_PBL_1Beat ((uint32_t)0x00000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */ - #define ETH_DMABMR_PBL_2Beat ((uint32_t)0x00000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */ - #define ETH_DMABMR_PBL_4Beat ((uint32_t)0x00000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ - #define ETH_DMABMR_PBL_8Beat ((uint32_t)0x00000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ - #define ETH_DMABMR_PBL_16Beat ((uint32_t)0x00001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ - #define ETH_DMABMR_PBL_32Beat ((uint32_t)0x00002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ - #define ETH_DMABMR_PBL_4xPBL_4Beat ((uint32_t)0x01000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ - #define ETH_DMABMR_PBL_4xPBL_8Beat ((uint32_t)0x01000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ - #define ETH_DMABMR_PBL_4xPBL_16Beat ((uint32_t)0x01000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ - #define ETH_DMABMR_PBL_4xPBL_32Beat ((uint32_t)0x01000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ - #define ETH_DMABMR_PBL_4xPBL_64Beat ((uint32_t)0x01001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */ - #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */ -#define ETH_DMABMR_DSL ((uint32_t)0x0000007C) /* Descriptor Skip Length */ -#define ETH_DMABMR_DA ((uint32_t)0x00000002) /* DMA arbitration scheme */ -#define ETH_DMABMR_SR ((uint32_t)0x00000001) /* Software reset */ - -/* Bit definition for Ethernet DMA Transmit Poll Demand Register */ -#define ETH_DMATPDR_TPD ((uint32_t)0xFFFFFFFF) /* Transmit poll demand */ - -/* Bit definition for Ethernet DMA Receive Poll Demand Register */ -#define ETH_DMARPDR_RPD ((uint32_t)0xFFFFFFFF) /* Receive poll demand */ - -/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */ -#define ETH_DMARDLAR_SRL ((uint32_t)0xFFFFFFFF) /* Start of receive list */ - -/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */ -#define ETH_DMATDLAR_STL ((uint32_t)0xFFFFFFFF) /* Start of transmit list */ - -/* Bit definition for Ethernet DMA Status Register */ -#define ETH_DMASR_TSTS ((uint32_t)0x20000000) /* Time-stamp trigger status */ -#define ETH_DMASR_PMTS ((uint32_t)0x10000000) /* PMT status */ -#define ETH_DMASR_MMCS ((uint32_t)0x08000000) /* MMC status */ -#define ETH_DMASR_EBS ((uint32_t)0x03800000) /* Error bits status */ - /* combination with EBS[2:0] for GetFlagStatus function */ - #define ETH_DMASR_EBS_DescAccess ((uint32_t)0x02000000) /* Error bits 0-data buffer, 1-desc. access */ - #define ETH_DMASR_EBS_ReadTransf ((uint32_t)0x01000000) /* Error bits 0-write trnsf, 1-read transfr */ - #define ETH_DMASR_EBS_DataTransfTx ((uint32_t)0x00800000) /* Error bits 0-Rx DMA, 1-Tx DMA */ -#define ETH_DMASR_TPS ((uint32_t)0x00700000) /* Transmit process state */ - #define ETH_DMASR_TPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Tx Command issued */ - #define ETH_DMASR_TPS_Fetching ((uint32_t)0x00100000) /* Running - fetching the Tx descriptor */ - #define ETH_DMASR_TPS_Waiting ((uint32_t)0x00200000) /* Running - waiting for status */ - #define ETH_DMASR_TPS_Reading ((uint32_t)0x00300000) /* Running - reading the data from host memory */ - #define ETH_DMASR_TPS_Suspended ((uint32_t)0x00600000) /* Suspended - Tx Descriptor unavailabe */ - #define ETH_DMASR_TPS_Closing ((uint32_t)0x00700000) /* Running - closing Rx descriptor */ -#define ETH_DMASR_RPS ((uint32_t)0x000E0000) /* Receive process state */ - #define ETH_DMASR_RPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Rx Command issued */ - #define ETH_DMASR_RPS_Fetching ((uint32_t)0x00020000) /* Running - fetching the Rx descriptor */ - #define ETH_DMASR_RPS_Waiting ((uint32_t)0x00060000) /* Running - waiting for packet */ - #define ETH_DMASR_RPS_Suspended ((uint32_t)0x00080000) /* Suspended - Rx Descriptor unavailable */ - #define ETH_DMASR_RPS_Closing ((uint32_t)0x000A0000) /* Running - closing descriptor */ - #define ETH_DMASR_RPS_Queuing ((uint32_t)0x000E0000) /* Running - queuing the recieve frame into host memory */ -#define ETH_DMASR_NIS ((uint32_t)0x00010000) /* Normal interrupt summary */ -#define ETH_DMASR_AIS ((uint32_t)0x00008000) /* Abnormal interrupt summary */ -#define ETH_DMASR_ERS ((uint32_t)0x00004000) /* Early receive status */ -#define ETH_DMASR_FBES ((uint32_t)0x00002000) /* Fatal bus error status */ -#define ETH_DMASR_ETS ((uint32_t)0x00000400) /* Early transmit status */ -#define ETH_DMASR_RWTS ((uint32_t)0x00000200) /* Receive watchdog timeout status */ -#define ETH_DMASR_RPSS ((uint32_t)0x00000100) /* Receive process stopped status */ -#define ETH_DMASR_RBUS ((uint32_t)0x00000080) /* Receive buffer unavailable status */ -#define ETH_DMASR_RS ((uint32_t)0x00000040) /* Receive status */ -#define ETH_DMASR_TUS ((uint32_t)0x00000020) /* Transmit underflow status */ -#define ETH_DMASR_ROS ((uint32_t)0x00000010) /* Receive overflow status */ -#define ETH_DMASR_TJTS ((uint32_t)0x00000008) /* Transmit jabber timeout status */ -#define ETH_DMASR_TBUS ((uint32_t)0x00000004) /* Transmit buffer unavailable status */ -#define ETH_DMASR_TPSS ((uint32_t)0x00000002) /* Transmit process stopped status */ -#define ETH_DMASR_TS ((uint32_t)0x00000001) /* Transmit status */ - -/* Bit definition for Ethernet DMA Operation Mode Register */ -#define ETH_DMAOMR_DTCEFD ((uint32_t)0x04000000) /* Disable Dropping of TCP/IP checksum error frames */ -#define ETH_DMAOMR_RSF ((uint32_t)0x02000000) /* Receive store and forward */ -#define ETH_DMAOMR_DFRF ((uint32_t)0x01000000) /* Disable flushing of received frames */ -#define ETH_DMAOMR_TSF ((uint32_t)0x00200000) /* Transmit store and forward */ -#define ETH_DMAOMR_FTF ((uint32_t)0x00100000) /* Flush transmit FIFO */ -#define ETH_DMAOMR_TTC ((uint32_t)0x0001C000) /* Transmit threshold control */ - #define ETH_DMAOMR_TTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Transmit FIFO is 64 Bytes */ - #define ETH_DMAOMR_TTC_128Bytes ((uint32_t)0x00004000) /* threshold level of the MTL Transmit FIFO is 128 Bytes */ - #define ETH_DMAOMR_TTC_192Bytes ((uint32_t)0x00008000) /* threshold level of the MTL Transmit FIFO is 192 Bytes */ - #define ETH_DMAOMR_TTC_256Bytes ((uint32_t)0x0000C000) /* threshold level of the MTL Transmit FIFO is 256 Bytes */ - #define ETH_DMAOMR_TTC_40Bytes ((uint32_t)0x00010000) /* threshold level of the MTL Transmit FIFO is 40 Bytes */ - #define ETH_DMAOMR_TTC_32Bytes ((uint32_t)0x00014000) /* threshold level of the MTL Transmit FIFO is 32 Bytes */ - #define ETH_DMAOMR_TTC_24Bytes ((uint32_t)0x00018000) /* threshold level of the MTL Transmit FIFO is 24 Bytes */ - #define ETH_DMAOMR_TTC_16Bytes ((uint32_t)0x0001C000) /* threshold level of the MTL Transmit FIFO is 16 Bytes */ -#define ETH_DMAOMR_ST ((uint32_t)0x00002000) /* Start/stop transmission command */ -#define ETH_DMAOMR_FEF ((uint32_t)0x00000080) /* Forward error frames */ -#define ETH_DMAOMR_FUGF ((uint32_t)0x00000040) /* Forward undersized good frames */ -#define ETH_DMAOMR_RTC ((uint32_t)0x00000018) /* receive threshold control */ - #define ETH_DMAOMR_RTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Receive FIFO is 64 Bytes */ - #define ETH_DMAOMR_RTC_32Bytes ((uint32_t)0x00000008) /* threshold level of the MTL Receive FIFO is 32 Bytes */ - #define ETH_DMAOMR_RTC_96Bytes ((uint32_t)0x00000010) /* threshold level of the MTL Receive FIFO is 96 Bytes */ - #define ETH_DMAOMR_RTC_128Bytes ((uint32_t)0x00000018) /* threshold level of the MTL Receive FIFO is 128 Bytes */ -#define ETH_DMAOMR_OSF ((uint32_t)0x00000004) /* operate on second frame */ -#define ETH_DMAOMR_SR ((uint32_t)0x00000002) /* Start/stop receive */ - -/* Bit definition for Ethernet DMA Interrupt Enable Register */ -#define ETH_DMAIER_NISE ((uint32_t)0x00010000) /* Normal interrupt summary enable */ -#define ETH_DMAIER_AISE ((uint32_t)0x00008000) /* Abnormal interrupt summary enable */ -#define ETH_DMAIER_ERIE ((uint32_t)0x00004000) /* Early receive interrupt enable */ -#define ETH_DMAIER_FBEIE ((uint32_t)0x00002000) /* Fatal bus error interrupt enable */ -#define ETH_DMAIER_ETIE ((uint32_t)0x00000400) /* Early transmit interrupt enable */ -#define ETH_DMAIER_RWTIE ((uint32_t)0x00000200) /* Receive watchdog timeout interrupt enable */ -#define ETH_DMAIER_RPSIE ((uint32_t)0x00000100) /* Receive process stopped interrupt enable */ -#define ETH_DMAIER_RBUIE ((uint32_t)0x00000080) /* Receive buffer unavailable interrupt enable */ -#define ETH_DMAIER_RIE ((uint32_t)0x00000040) /* Receive interrupt enable */ -#define ETH_DMAIER_TUIE ((uint32_t)0x00000020) /* Transmit Underflow interrupt enable */ -#define ETH_DMAIER_ROIE ((uint32_t)0x00000010) /* Receive Overflow interrupt enable */ -#define ETH_DMAIER_TJTIE ((uint32_t)0x00000008) /* Transmit jabber timeout interrupt enable */ -#define ETH_DMAIER_TBUIE ((uint32_t)0x00000004) /* Transmit buffer unavailable interrupt enable */ -#define ETH_DMAIER_TPSIE ((uint32_t)0x00000002) /* Transmit process stopped interrupt enable */ -#define ETH_DMAIER_TIE ((uint32_t)0x00000001) /* Transmit interrupt enable */ - -/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */ -#define ETH_DMAMFBOCR_OFOC ((uint32_t)0x10000000) /* Overflow bit for FIFO overflow counter */ -#define ETH_DMAMFBOCR_MFA ((uint32_t)0x0FFE0000) /* Number of frames missed by the application */ -#define ETH_DMAMFBOCR_OMFC ((uint32_t)0x00010000) /* Overflow bit for missed frame counter */ -#define ETH_DMAMFBOCR_MFC ((uint32_t)0x0000FFFF) /* Number of frames missed by the controller */ - -/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */ -#define ETH_DMACHTDR_HTDAP ((uint32_t)0xFFFFFFFF) /* Host transmit descriptor address pointer */ - -/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */ -#define ETH_DMACHRDR_HRDAP ((uint32_t)0xFFFFFFFF) /* Host receive descriptor address pointer */ - -/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */ -#define ETH_DMACHTBAR_HTBAP ((uint32_t)0xFFFFFFFF) /* Host transmit buffer address pointer */ - -/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */ -#define ETH_DMACHRBAR_HRBAP ((uint32_t)0xFFFFFFFF) /* Host receive buffer address pointer */ -#endif /* STM32F10X_CL */ - -/** - * @} - */ - - /** - * @} - */ - -#ifdef USE_STDPERIPH_DRIVER - #include "stm32f10x_conf.h" -#endif - -/** @addtogroup Exported_macro - * @{ - */ - -#define SET_BIT(REG, BIT) ((REG) |= (BIT)) - -#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) - -#define READ_BIT(REG, BIT) ((REG) & (BIT)) - -#define CLEAR_REG(REG) ((REG) = (0x0)) - -#define WRITE_REG(REG, VAL) ((REG) = (VAL)) - -#define READ_REG(REG) ((REG)) - -#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_H */ - -/** - * @} - */ - - /** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS debug support.htm b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS debug support.htm deleted file mode 100644 index 36e0446..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS debug support.htm +++ /dev/null @@ -1,243 +0,0 @@ -<html> - -<head> -<title>CMSIS Debug Support</title> -<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"> -<meta name="GENERATOR" content="Microsoft FrontPage 6.0"> -<meta name="ProgId" content="FrontPage.Editor.Document"> -<style> -<!-- -/*----------------------------------------------------------- -Keil Software CHM Style Sheet ------------------------------------------------------------*/ -body { color: #000000; background-color: #FFFFFF; font-size: 75%; font-family: - Verdana, Arial, 'Sans Serif' } -a:link { color: #0000FF; text-decoration: underline } -a:visited { color: #0000FF; text-decoration: underline } -a:active { color: #FF0000; text-decoration: underline } -a:hover { color: #FF0000; text-decoration: underline } -h1 { font-family: Verdana; font-size: 18pt; color: #000080; font-weight: bold; - text-align: Center; margin-right: 3 } -h2 { font-family: Verdana; font-size: 14pt; color: #000080; font-weight: bold; - background-color: #CCCCCC; margin-top: 24; margin-bottom: 3; - padding: 6 } -h3 { font-family: Verdana; font-size: 10pt; font-weight: bold; background-color: - #CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 } -pre { font-family: Courier New; font-size: 10pt; background-color: #CCFFCC; - margin-left: 24; margin-right: 24 } -ul { list-style-type: square; margin-top: 6pt; margin-bottom: 0 } -ol { margin-top: 6pt; margin-bottom: 0 } -li { clear: both; margin-bottom: 6pt } -table { font-size: 100%; border-width: 0; padding: 0 } -th { color: #FFFFFF; background-color: #000080; text-align: left; vertical-align: - bottom; padding-right: 6pt } -tr { text-align: left; vertical-align: top } -td { text-align: left; vertical-align: top; padding-right: 6pt } -.ToolT { font-size: 8pt; color: #808080 } -.TinyT { font-size: 8pt; text-align: Center } -code { color: #000000; background-color: #E0E0E0; font-family: 'Courier New', Courier; - line-height: 120%; font-style: normal } -/*----------------------------------------------------------- -Notes ------------------------------------------------------------*/ -p.note { font-weight: bold; clear: both; margin-bottom: 3pt; padding-top: 6pt } -/*----------------------------------------------------------- -Expanding/Contracting Divisions ------------------------------------------------------------*/ -#expand { text-decoration: none; margin-bottom: 3pt } -img.expand { border-style: none; border-width: medium } -div.expand { display: none; margin-left: 9pt; margin-top: 0 } -/*----------------------------------------------------------- -Where List Tags ------------------------------------------------------------*/ -p.wh { font-weight: bold; clear: both; margin-top: 6pt; margin-bottom: 3pt } -table.wh { width: 100% } -td.whItem { white-space: nowrap; font-style: italic; padding-right: 6pt; padding-bottom: - 6pt } -td.whDesc { padding-bottom: 6pt } -/*----------------------------------------------------------- -Keil Table Tags ------------------------------------------------------------*/ -table.kt { border: 1pt solid #000000 } -th.kt { white-space: nowrap; border-bottom: 1pt solid #000000; padding-left: 6pt; - padding-right: 6pt; padding-top: 4pt; padding-bottom: 4pt } -tr.kt { } -td.kt { color: #000000; background-color: #E0E0E0; border-top: 1pt solid #A0A0A0; - padding-left: 6pt; padding-right: 6pt; padding-top: 2pt; - padding-bottom: 2pt } -/*----------------------------------------------------------- ------------------------------------------------------------*/ ---> - -</style> -</head> - -<body> - -<h1>CMSIS Debug Support</h1> - -<hr> - -<h2>Cortex-M3 ITM Debug Access</h2> -<p> - The Cortex-M3 incorporates the Instrumented Trace Macrocell (ITM) that provides together with - the Serial Viewer Output trace capabilities for the microcontroller system. The ITM has - 32 communication channels which are able to transmit 32 / 16 / 8 bit values; two ITM - communication channels are used by CMSIS to output the following information: -</p> -<ul> - <li>ITM Channel 0: used for printf-style output via the debug interface.</li> - <li>ITM Channel 31: is reserved for RTOS kernel awareness debugging.</li> -</ul> - -<h2>Debug IN / OUT functions</h2> -<p>CMSIS provides following debug functions:</p> -<ul> - <li>ITM_SendChar (uses ITM channel 0)</li> - <li>ITM_ReceiveChar (uses global variable)</li> - <li>ITM_CheckChar (uses global variable)</li> -</ul> - -<h3>ITM_SendChar</h3> -<p> - <strong>ITM_SendChar</strong> is used to transmit a character over ITM channel 0 from - the microcontroller system to the debug system. <br> - Only a 8 bit value is transmitted. -</p> -<pre> -static __INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - /* check if debugger connected and ITM channel enabled for tracing */ - if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA) && - (ITM->TCR & ITM_TCR_ITMENA) && - (ITM->TER & (1UL << 0)) ) - { - while (ITM->PORT[0].u32 == 0); - ITM->PORT[0].u8 = (uint8_t)ch; - } - return (ch); -}</pre> - -<h3>ITM_ReceiveChar</h3> -<p> - ITM communication channel is only capable for OUT direction. For IN direction - a globel variable is used. A simple mechansim detects if a character is received. - The project to test need to be build with debug information. -</p> - -<p> - The globale variable <strong>ITM_RxBuffer</strong> is used to transmit a 8 bit value from debug system - to microcontroller system. <strong>ITM_RxBuffer</strong> is 32 bit wide to enshure a proper handshake. -</p> -<pre> -extern volatile int ITM_RxBuffer; /* variable to receive characters */ -</pre> -<p> - A dedicated bit pattern is used to determin if <strong>ITM_RxBuffer</strong> is empty - or contains a valid value. -</p> -<pre> -#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /* value identifying ITM_RxBuffer is ready for next character */ -</pre> -<p> - <strong>ITM_ReceiveChar</strong> is used to receive a 8 bit value from the debug system. The function is nonblocking. - It returns the received character or '-1' if no character was available. -</p> -<pre> -static __INLINE int ITM_ReceiveChar (void) { - int ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} -</pre> - -<h3>ITM_CheckChar</h3> -<p> - <strong>ITM_CheckChar</strong> is used to check if a character is received. -</p> -<pre> -static __INLINE int ITM_CheckChar (void) { - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { - return (0); /* no character available */ - } else { - return (1); /* character available */ - } -}</pre> - - -<h2>ITM Debug Support in uVision</h2> -<p> - uVision uses in a debug session the <strong>Debug (printf) Viewer</strong> window to - display the debug data. -</p> -<p>Direction microcontroller system -> uVision:</p> -<ul> - <li> - Characters received via ITM communication channel 0 are written in a printf style - to <strong>Debug (printf) Viewer</strong> window. - </li> -</ul> - -<p>Direction uVision -> microcontroller system:</p> -<ul> - <li>Check if <strong>ITM_RxBuffer</strong> variable is available (only performed once).</li> - <li>Read character from <strong>Debug (printf) Viewer</strong> window.</li> - <li>If <strong>ITM_RxBuffer</strong> empty write character to <strong>ITM_RxBuffer</strong>.</li> -</ul> - -<p class="Note">Note</p> -<ul> - <li><p>Current solution does not use a buffer machanism for trasmitting the characters.</p> - </li> -</ul> - -<h2>RTX Kernel awareness in uVision</h2> -<p> - uVision / RTX are using a simple and efficient solution for RTX Kernel awareness. - No format overhead is necessary.<br> - uVsion debugger decodes the RTX events via the 32 / 16 / 8 bit ITM write access - to ITM communication channel 31. -</p> - -<p>Following RTX events are traced:</p> -<ul> - <li>Task Create / Delete event - <ol> - <li>32 bit access. Task start address is transmitted</li> - <li>16 bit access. Task ID and Create/Delete flag are transmitted<br> - High byte holds Create/Delete flag, Low byte holds TASK ID. - </li> - </ol> - </li> - <li>Task switch event - <ol> - <li>8 bit access. Task ID of current task is transmitted</li> - </ol> - </li> -</ul> - -<p class="Note">Note</p> -<ul> - <li><p>Other RTOS information could be retrieved via memory read access in a polling mode manner.</p> - </li> -</ul> - - -<p class="MsoNormal"><span lang="EN-GB"> </span></p> - -<hr> - -<p class="TinyT">Copyright © KEIL - An ARM Company.<br> -All rights reserved.<br> -Visit our web site at <a href="http://www.keil.com">www.keil.com</a>. -</p> - -</body> - -</html>
\ No newline at end of file diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS_changes.htm b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS_changes.htm deleted file mode 100644 index 5a17f1a..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS_changes.htm +++ /dev/null @@ -1,320 +0,0 @@ -<html> - -<head> -<title>CMSIS Changes</title> -<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"> -<meta name="GENERATOR" content="Microsoft FrontPage 6.0"> -<meta name="ProgId" content="FrontPage.Editor.Document"> -<style> -<!-- -/*----------------------------------------------------------- -Keil Software CHM Style Sheet ------------------------------------------------------------*/ -body { color: #000000; background-color: #FFFFFF; font-size: 75%; font-family: - Verdana, Arial, 'Sans Serif' } -a:link { color: #0000FF; text-decoration: underline } -a:visited { color: #0000FF; text-decoration: underline } -a:active { color: #FF0000; text-decoration: underline } -a:hover { color: #FF0000; text-decoration: underline } -h1 { font-family: Verdana; font-size: 18pt; color: #000080; font-weight: bold; - text-align: Center; margin-right: 3 } -h2 { font-family: Verdana; font-size: 14pt; color: #000080; font-weight: bold; - background-color: #CCCCCC; margin-top: 24; margin-bottom: 3; - padding: 6 } -h3 { font-family: Verdana; font-size: 10pt; font-weight: bold; background-color: - #CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 } -pre { font-family: Courier New; font-size: 10pt; background-color: #CCFFCC; - margin-left: 24; margin-right: 24 } -ul { list-style-type: square; margin-top: 6pt; margin-bottom: 0 } -ol { margin-top: 6pt; margin-bottom: 0 } -li { clear: both; margin-bottom: 6pt } -table { font-size: 100%; border-width: 0; padding: 0 } -th { color: #FFFFFF; background-color: #000080; text-align: left; vertical-align: - bottom; padding-right: 6pt } -tr { text-align: left; vertical-align: top } -td { text-align: left; vertical-align: top; padding-right: 6pt } -.ToolT { font-size: 8pt; color: #808080 } -.TinyT { font-size: 8pt; text-align: Center } -code { color: #000000; background-color: #E0E0E0; font-family: 'Courier New', Courier; - line-height: 120%; font-style: normal } -/*----------------------------------------------------------- -Notes ------------------------------------------------------------*/ -p.note { font-weight: bold; clear: both; margin-bottom: 3pt; padding-top: 6pt } -/*----------------------------------------------------------- -Expanding/Contracting Divisions ------------------------------------------------------------*/ -#expand { text-decoration: none; margin-bottom: 3pt } -img.expand { border-style: none; border-width: medium } -div.expand { display: none; margin-left: 9pt; margin-top: 0 } -/*----------------------------------------------------------- -Where List Tags ------------------------------------------------------------*/ -p.wh { font-weight: bold; clear: both; margin-top: 6pt; margin-bottom: 3pt } -table.wh { width: 100% } -td.whItem { white-space: nowrap; font-style: italic; padding-right: 6pt; padding-bottom: - 6pt } -td.whDesc { padding-bottom: 6pt } -/*----------------------------------------------------------- -Keil Table Tags ------------------------------------------------------------*/ -table.kt { border: 1pt solid #000000 } -th.kt { white-space: nowrap; border-bottom: 1pt solid #000000; padding-left: 6pt; - padding-right: 6pt; padding-top: 4pt; padding-bottom: 4pt } -tr.kt { } -td.kt { color: #000000; background-color: #E0E0E0; border-top: 1pt solid #A0A0A0; - padding-left: 6pt; padding-right: 6pt; padding-top: 2pt; - padding-bottom: 2pt } -/*----------------------------------------------------------- ------------------------------------------------------------*/ ---> - -</style> -</head> - -<body> - -<h1>Changes to CMSIS version V1.20</h1> - -<hr> - -<h2>1. Removed CMSIS Middelware packages</h2> -<p> - CMSIS Middleware is on hold from ARM side until a agreement between all CMSIS partners is found. -</p> - -<h2>2. SystemFrequency renamed to SystemCoreClock</h2> -<p> - The variable name <strong>SystemCoreClock</strong> is more precise than <strong>SystemFrequency</strong> - because the variable holds the clock value at which the core is running. -</p> - -<h2>3. Changed startup concept</h2> -<p> - The old startup concept (calling SystemInit_ExtMemCtl from startup file and calling SystemInit - from main) has the weakness that it does not work for controllers which need a already - configuerd clock system to configure the external memory controller. -</p> - -<h3>Changed startup concept</h3> -<ul> - <li> - SystemInit() is called from startup file before <strong>premain</strong>. - </li> - <li> - <strong>SystemInit()</strong> configures the clock system and also configures - an existing external memory controller. - </li> - <li> - <strong>SystemInit()</strong> must not use global variables. - </li> - <li> - <strong>SystemCoreClock</strong> is initialized with a correct predefined value. - </li> - <li> - Additional function <strong>void SystemCoreClockUpdate (void)</strong> is provided.<br> - <strong>SystemCoreClockUpdate()</strong> updates the variable <strong>SystemCoreClock</strong> - and must be called whenever the core clock is changed.<br> - <strong>SystemCoreClockUpdate()</strong> evaluates the clock register settings and calculates - the current core clock. - </li> -</ul> - - -<h2>4. Advanced Debug Functions</h2> -<p> - ITM communication channel is only capable for OUT direction. To allow also communication for - IN direction a simple concept is provided. -</p> -<ul> - <li> - Global variable <strong>volatile int ITM_RxBuffer</strong> used for IN data. - </li> - <li> - Function <strong>int ITM_CheckChar (void)</strong> checks if a new character is available. - </li> - <li> - Function <strong>int ITM_ReceiveChar (void)</strong> retrieves the new character. - </li> -</ul> - -<p> - For detailed explanation see file <strong>CMSIS debug support.htm</strong>. -</p> - - -<h2>5. Core Register Bit Definitions</h2> -<p> - Files core_cm3.h and core_cm0.h contain now bit definitions for Core Registers. The name for the - defines correspond with the Cortex-M Technical Reference Manual. -</p> -<p> - e.g. SysTick structure with bit definitions -</p> -<pre> -/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick - memory mapped structure for SysTick - @{ - */ -typedef struct -{ - __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */ - __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */ - __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */ - __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ -/*@}*/ /* end of group CMSIS_CM3_SysTick */</pre> - -<h2>7. DoxyGen Tags</h2> -<p> - DoxyGen tags in files core_cm3.[c,h] and core_cm0.[c,h] are reworked to create proper documentation - using DoxyGen. -</p> - -<h2>8. Folder Structure</h2> -<p> - The folder structure is changed to differentiate the single support packages. -</p> - - <ul> - <li>CM0</li> - <li>CM3 - <ul> - <li>CoreSupport</li> - <li>DeviceSupport</li> - <ul> - <li>Vendor - <ul> - <li>Device - <ul> - <li>Startup - <ul> - <li>Toolchain</li> - <li>Toolchain</li> - <li>...</li> - </ul> - </li> - </ul> - </li> - <li>Device</li> - <li>...</li> - </ul> - </li> - <li>Vendor</li> - <li>...</li> - </ul> - </li> - <li>Example - <ul> - <li>Toolchain - <ul> - <li>Device</li> - <li>Device</li> - <li>...</li> - </ul> - </li> - <li>Toolchain</li> - <li>...</li> - </ul> - </li> - </ul> - </li> - - <li>Documentation</li> - </ul> - -<h2>9. Open Points</h2> -<p> - Following points need to be clarified and solved: -</p> -<ul> - <li> - <p> - Equivalent C and Assembler startup files. - </p> - <p> - Is there a need for having C startup files although assembler startup files are - very efficient and do not need to be changed? - <p/> - </li> - <li> - <p> - Placing of HEAP in external RAM. - </p> - <p> - It must be possible to place HEAP in external RAM if the device supports an - external memory controller. - </p> - </li> - <li> - <p> - Placing of STACK /HEAP. - </p> - <p> - STACK should always be placed at the end of internal RAM. - </p> - <p> - If HEAP is placed in internal RAM than it should be placed after RW ZI section. - </p> - </li> - <li> - <p> - Removing core_cm3.c and core_cm0.c. - </p> - <p> - On a long term the functions in core_cm3.c and core_cm0.c must be replaced with - appropriate compiler intrinsics. - </p> - </li> -</ul> - - -<h2>10. Limitations</h2> -<p> - The following limitations are not covered with the current CMSIS version: -</p> -<ul> - <li> - No <strong>C startup files</strong> for ARM toolchain are provided. - </li> - <li> - No <strong>C startup files</strong> for GNU toolchain are provided. - </li> - <li> - No <strong>C startup files</strong> for IAR toolchain are provided. - </li> - <li> - No <strong>Tasking</strong> projects are provided yet. - </li> -</ul> diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/License.doc b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/License.doc Binary files differdeleted file mode 100644 index b6b8ace..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/License.doc +++ /dev/null diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/Release_Notes.html b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/Release_Notes.html deleted file mode 100644 index 44dd101..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/Release_Notes.html +++ /dev/null @@ -1,342 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> -<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head> - - - - - - - - -<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> -<link rel="File-List" href="Library_files/filelist.xml"> -<link rel="Edit-Time-Data" href="Library_files/editdata.mso"><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]--><title>Release Notes for STM32F10x Standard Peripherals Library Drivers</title><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>STMicroelectronics</o:LastAuthor> <o:Revision>37</o:Revision> <o:TotalTime>136</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2009-03-01T17:56:00Z</o:LastSaved> <o:Pages>1</o:Pages> <o:Words>522</o:Words> <o:Characters>2977</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>24</o:Lines> <o:Paragraphs>6</o:Paragraphs> <o:CharactersWithSpaces>3493</o:CharactersWithSpaces> <o:Version>11.6568</o:Version> </o:DocumentProperties> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:Zoom>110</w:Zoom> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]--> - - - -<style> -<!-- -/* Style Definitions */ -p.MsoNormal, li.MsoNormal, div.MsoNormal -{mso-style-parent:""; -margin:0in; -margin-bottom:.0001pt; -mso-pagination:widow-orphan; -font-size:12.0pt; -font-family:"Times New Roman"; -mso-fareast-font-family:"Times New Roman";} -h2 -{mso-style-next:Normal; -margin-top:12.0pt; -margin-right:0in; -margin-bottom:3.0pt; -margin-left:0in; -mso-pagination:widow-orphan; -page-break-after:avoid; -mso-outline-level:2; -font-size:14.0pt; -font-family:Arial; -font-weight:bold; -font-style:italic;} -a:link, span.MsoHyperlink -{color:blue; -text-decoration:underline; -text-underline:single;} -a:visited, span.MsoHyperlinkFollowed -{color:blue; -text-decoration:underline; -text-underline:single;} -p -{mso-margin-top-alt:auto; -margin-right:0in; -mso-margin-bottom-alt:auto; -margin-left:0in; -mso-pagination:widow-orphan; -font-size:12.0pt; -font-family:"Times New Roman"; -mso-fareast-font-family:"Times New Roman";} -@page Section1 -{size:8.5in 11.0in; -margin:1.0in 1.25in 1.0in 1.25in; -mso-header-margin:.5in; -mso-footer-margin:.5in; -mso-paper-source:0;} -div.Section1 -{page:Section1;} ---> -</style><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="5122"/> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext="edit"> <o:idmap v:ext="edit" data="1"/> </o:shapelayout></xml><![endif]--></head> -<body lang="EN-US" link="blue" vlink="blue"> -<div class="Section1"> -<p class="MsoNormal"><span style="font-family: Arial;"><o:p><br> -</o:p></span></p> -<div align="center"> -<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900"> -<tbody> -<tr style=""> -<td style="padding: 0cm;" valign="top"> -<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900"> -<tbody> - <tr> - <td style="vertical-align: top;"><span style="font-size: 8pt; font-family: Arial; color: blue;"><a href="../../Release_Notes.html">Back to Release page</a></span></td> - </tr> -<tr style=""> -<td style="padding: 1.5pt;"> -<h1 style="margin-bottom: 18pt; text-align: center;" align="center"><span style="font-size: 20pt; font-family: Verdana; color: rgb(51, 102, 255);">Release -Notes for STM32F10x Standard Peripherals Library Drivers -(StdPeriph_Driver)</span><span style="font-size: 20pt; font-family: Verdana;"><o:p></o:p></span></h1> -<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;">Copyright 2011 STMicroelectronics</span><span style="color: black;"><u1:p></u1:p><o:p></o:p></span></p> -<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;"><img alt="" id="_x0000_i1025" src="../../_htmresc/logo.bmp" style="border: 0px solid ; width: 86px; height: 65px;"></span><span style="font-size: 10pt;"><o:p></o:p></span></p> -</td> -</tr> -</tbody> -</table> -<p class="MsoNormal"><span style="font-family: Arial; display: none;"><o:p> </o:p></span></p> -<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" width="900"> -<tbody> -<tr> -<td style="padding: 0cm;" valign="top"> -<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><span style="font-size: 12pt; color: white;">Contents<o:p></o:p></span></h2> -<ol style="margin-top: 0cm;" start="1" type="1"> -<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#History">STM32F10x Standard Peripherals Library -Drivers update History</a><o:p></o:p></span></li> -<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#License">License</a><o:p></o:p></span></li> -</ol> -<span style="font-family: "Times New Roman";"> -</span> -<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="History"></a><span style="font-size: 12pt; color: white;">STM32F10x Standard -Peripherals Library Drivers update History</span></h2><br> - <h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 167px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V3.5.0 / 11-March-2011<o:p></o:p></span></h3> - <p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main -Changes<o:p></o:p></span></u></b></p> - - <ul style="margin-top: 0cm;" type="square"> -<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_can.h/.c files:</span></li> - <ul> - <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add 5 new functions</span></li> - <ul> - <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">3 -new functions controlling the counter errors: CAN_GetLastErrorCode(), -CAN_GetReceiveErrorCounter() and CAN_GetLSBTransmitErrorCounter().</span></li> - </ul> - <ul> - <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">1 new function to select the CAN operating mode: CAN_OperatingModeRequest().</span></li> - </ul> - <ul> - <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">1 new function to support CAN TT mode: CAN_TTComModeCmd().</span><span style="font-size: 10pt; font-family: Verdana;"><br> - </span></li> - </ul> - <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">CAN_TransmitStatus() function updated to support all CAN transmit intermediate states<br> - </span></li> - </ul> - <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_i2c.h/.c files:</span></li> - <ul> - <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add 1 new function:</span></li> - <ul> - <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">I2C_NACKPositionConfig(): -This function configures the same bit (POS) as I2C_PECPositionConfig() -but is intended to be used in I2C mode while I2C_PECPositionConfig() is -intended to used in SMBUS mode.</span></li> - </ul> - </ul> - <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_tim.h/.c files:</span></li> - <ul> - <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Change the <span style="font-style: italic;">TIM_DMABurstLength_xBytes</span> definitions to <span style="font-style: italic;">TIM_DMABurstLength_xTansfers</span><br> - </span></li> - </ul> - - - </ul> - - <h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.4.0 -- 10/15/2010</span></h3> - - <ol style="margin-top: 0in;" start="1" type="1"> -<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b><i><span style="font-size: 10pt; font-family: Verdana;"> </span></i><i><span style="font-size: 10pt;"><o:p></o:p></span></i></li> - </ol> - - <ul style="margin-top: 0in;" type="disc"> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support for <span style="font-weight: bold;">STM32F10x High-density value line </span>devices.</span></li> - </ul> - - <ol style="margin-top: 0in;" start="2" type="1"> -<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x_StdPeriph_Driver</span></i></b><b><i><span style="font-size: 10pt;"><o:p></o:p></span></i></b></li> - </ol> - - - <ul style="margin-top: 0in;" type="disc"> - - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_bkp.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Delete BKP registers definition from stm32f10x_bkp.c and use defines within stm32f10x.h file. </span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_can.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Delete CAN registers definition from stm32f10x_can.c and use defines within stm32f10x.h file.<br> -</span></span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Update the wording of some defines and Asserts macro. <br> - </span></span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">CAN_GetFlagStatus() -and CAN_ClearFlag() functions: updated to support new flags (were not -supported in previous version). These flags are: CAN_FLAG_RQCP0, -CAN_FLAG_RQCP1, CAN_FLAG_RQCP2, CAN_FLAG_FMP1, CAN_FLAG_FF1, -CAN_FLAG_FOV1, CAN_FLAG_FMP0, CAN_FLAG_FF0, CAN_FLAG_FOV0, -CAN_FLAG_WKU, CAN_FLAG_SLAK and CAN_FLAG_LEC. <br> - </span></span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">CAN_GetITStatus() -function: add a check of the interrupt enable bit before getting the -status of corresponding interrupt pending bit. <br> - </span></span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">CAN_ClearITPendingBit() function: correct the procedure to clear the interrupt pending bit. <br> - </span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_crc.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Delete CRC registers definition from stm32f10x_crc.c and use defines within stm32f10x.h file.</span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_dac.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Delete DAC registers definition from stm32f10x_dac.c and use defines within stm32f10x.h file. </span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_dbgmcu.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Delete DBGMCU registers definition from stm32f10x_dbgmcu.c and use defines within stm32f10x.h file. </span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_dma.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Delete DMA registers definition from stm32f10x_dma.c and use defines within stm32f10x.h file.</span></span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Add new function "void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);"<br> - </span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_flash.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">FLASH functions (Erase and Program) updated to always clear the "PG", "MER" and "PER" bits even in case of TimeOut Error.</span><span style="font-style: italic;"></span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_fsmc.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Add new member "FSMC_AsynchronousWait" in "FSMC_NORSRAMInitTypeDef" structure.</span><span style="font-style: italic;"></span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_gpio.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">GPIO_PinRemapConfig()</span> function: add new values for <span style="font-style: italic;">GPIO_Remap</span> parameter, to support new <span style="font-style: italic;">remap for TIM6, TIM7 and DAC DMA requests, TIM12 and DAC Triggers / DMA2_Channel5 Interrupt mapping.</span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_pwr.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Delete PWR registers definition from stm32f10x_pwr.c and use defines within stm32f10x.h and core_cm3.h files.</span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_rtc.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Delete RTC registers definition from stm32f10x_rtc.c and use defines within stm32f10x.h file.</span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_spi.h/.c</span></li> - <ul> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Add new definition for I2S Audio Clock frequencies "I2S_AudioFreq_192k".</span></span></li> - </ul> - <li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_tim.h/.c</span></li> -<ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Add new definition for TIM Input Capture Polarity "TIM_ICPolarity_BothEdge".</span></span></li></ul> - - </ul> - - <h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.3.0 -- 04/16/2010</span></h3> - -<ol style="margin-top: 0in;" start="1" type="1"><li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b><i><span style="font-size: 10pt; font-family: Verdana;"> </span></i><i><span style="font-size: 10pt;"><o:p></o:p></span></i></li></ol> -<ul style="margin-top: 0in;" type="disc"><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support for <span style="font-weight: bold;">STM32F10x XL-density </span>devices.</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">I2C driver: events description and management enhancement.</span></li></ul> -<ol style="margin-top: 0in;" start="2" type="1"><li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x_StdPeriph_Driver</span></i></b><b><i><span style="font-size: 10pt;"><o:p></o:p></span></i></b></li></ol> -<ul style="margin-top: 0in;" type="disc"><li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_dbgmcu.h/.c</span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">DBGMCU_Config()</span> function: add new values <span style="font-style: italic;">DBGMCU_TIMx_STOP</span> (x: 9..14) for <span style="font-style: italic;">DBGMCU_Periph</span> parameter.</span></li></ul><li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_flash.h/.c: -updated to support Bank2 of XL-density devices (up to 1MByte of Flash -memory). For more details, refer to the description provided within -stm32f10x_flash.c file.</span></li><li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_gpio.h/.c</span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">GPIO_PinRemapConfig()</span> function: add new values for <span style="font-style: italic;">GPIO_Remap</span> parameter, to support new <span style="font-style: italic;">remap for FSMC_NADV pin and TIM9..11,13,14.</span></span></li></ul><li class="MsoNormal"><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_i2c.h/.c: I2C events description and management enhancement. <br></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">I2C_CheckEvent()</span> -function: updated to check whether the last event contains the -I2C_EVENT (instead of check whether the last event is equal to -I2C_EVENT)<br></span></li></ul><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add -detailed description of I2C events and how to manage them using the -functions provided by this driver. For more information, refer to -stm32f10x_i2c.h and stm32f10x_i2c.c files.</span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_rcc.h/.c: updated to support TIM9..TIM14 APB clock and reset configuration</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_tim.h/.c: updated to support new Timers TIM9..TIM14.</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">stm32f10x_sdio.h: </span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">SDIO_SetSDIOReadWaitMode() function: correct values of SDIO_ReadWaitMode parameter<br>change <br> -#define -SDIO_ReadWaitMode_CLK - ((uint32_t)0x00000000)<br> #define -SDIO_ReadWaitMode_DATA2 -((uint32_t)0x00000001)<br>by<br> #define -SDIO_ReadWaitMode_CLK - ((uint32_t)0x00000001)<br> #define -SDIO_ReadWaitMode_DATA2 -((uint32_t)0x00000000)</span></li></ul></ul> -<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.2.0 -- 03/01/2010</span></h3> -<ol style="margin-top: 0in;" start="1" type="1"> -<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b><i><span style="font-size: 10pt; font-family: Verdana;"> </span></i><i><span style="font-size: 10pt;"><o:p></o:p></span></i></li> -</ol> -<ul style="margin-top: 0in;" type="disc"> - -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support -for <b>STM32 Low-density Value line (STM32F100x4/6) and -Medium-density Value line (STM32F100x8/B) devices</b>.</span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Almost -peripherals drivers were updated to support Value -line devices features</span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Drivers limitations fix and enhancements. </span><span style="font-size: 10pt;"><o:p></o:p></span></li> - -</ul> -<ol style="margin-top: 0in;" start="2" type="1"> -<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x_StdPeriph_Driver</span></i></b><b><i><span style="font-size: 10pt;"><o:p></o:p></span></i></b></li> -</ol> -<ul style="margin-top: 0in;" type="disc"> -<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new -firmware driver for CEC peripheral: stm32f10x_cec.h and stm32f10x_cec.c</span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Timers drivers stm32f10x_tim.h/.c: add support for new General Purpose Timers: TIM15, TIM16 and TIM17.</span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">RCC driver: add support for new Value peripherals: HDMI-CEC, TIM15, TIM16 and TIM17.</span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">GPIO driver: add new remap parameters for TIM1, TIM15, TIM16, TIM17 and HDMI-CEC: </span><span style="font-size: 10pt; font-family: Verdana;">GPIO_Remap_TIM1_DMA, </span><span style="font-size: 10pt; font-family: Verdana;">GPIO_Remap_TIM15, GPIO_Remap_TIM16, GPIO_Remap_TIM17, GPIO_Remap_CEC.</span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">USART -driver: add support for Oversampling by 8 mode and onebit method. 2 -functions has been added: USART_OverSampling8Cmd() and -USART_OneBitMethodCmd().<br> - </span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">DAC -driver: add new functions handling the DAC under run feature: -DAC_ITConfig(), DAC_GetFlagStatus(), DAC_ClearFlag(), DAC_GetITStatus() -and DAC_ClearITPendingBit().</span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">DBGMCU driver: add new parameters for TIM15, TIM16 and TIM17: DBGMCU_TIM15_STOP, DBGMCU_TIM16_STOP, DBGMCU_TIM17_STOP.<br> - </span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">FLASH -driver: the FLASH_EraseOptionBytes() function updated. This is now just -erasing the option bytes without modifying the RDP status either -enabled or disabled.</span></li> - <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">PWR -driver: the PWR_EnterSTOPMode() function updated. When woken up from -STOP mode, this function resets again the SLEEPDEEP bit in the -Cortex-M3 System Control register to allow Sleep mode entering.</span></li> - - -</ul> -<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="License"></a><span style="font-size: 12pt; color: white;">License<o:p></o:p></span></h2> -<p class="MsoNormal" style="margin: 4.5pt 0cm;"><span style="font-size: 10pt; font-family: Verdana; color: black;">The -enclosed firmware and all the related documentation are not covered by -a License Agreement, if you need such License you can contact your -local STMicroelectronics office.<u1:p></u1:p><o:p></o:p></span></p> -<p class="MsoNormal"><b style=""><span style="font-size: 10pt; font-family: Verdana; color: black;">THE -PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO -SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR -ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY -CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY -CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH -THEIR PRODUCTS. <o:p></o:p></span></b></p> -<p class="MsoNormal"><span style="color: black;"><o:p> </o:p></span></p> -<div class="MsoNormal" style="text-align: center;" align="center"><span style="color: black;"> -<hr align="center" size="2" width="100%"></span></div> -<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt; text-align: center;" align="center"><span style="font-size: 10pt; font-family: Verdana; color: black;">For -complete documentation on </span><span style="font-size: 10pt; font-family: Verdana;">STM32(<span style="color: black;">CORTEX M3) 32-Bit Microcontrollers -visit </span><u><span style="color: blue;"><a href="http://www.st.com/stm32" target="_blank">www.st.com/STM32</a></span></u></span><span style="color: black;"><o:p></o:p></span></p> -</td> -</tr> -</tbody> -</table> -<p class="MsoNormal"><span style="font-size: 10pt;"><o:p></o:p></span></p> -</td> -</tr> -</tbody> -</table> -</div> -<p class="MsoNormal"><o:p> </o:p></p> -</div> -</body></html>
\ No newline at end of file diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h deleted file mode 100644 index 9a6bd07..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h +++ /dev/null @@ -1,220 +0,0 @@ -/** - ****************************************************************************** - * @file misc.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the miscellaneous - * firmware library functions (add-on to CMSIS functions). - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MISC_H -#define __MISC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup MISC - * @{ - */ - -/** @defgroup MISC_Exported_Types - * @{ - */ - -/** - * @brief NVIC Init Structure definition - */ - -typedef struct -{ - uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. - This parameter can be a value of @ref IRQn_Type - (For the complete STM32 Devices IRQ Channels list, please - refer to stm32f10x.h file) */ - - uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel - specified in NVIC_IRQChannel. This parameter can be a value - between 0 and 15 as described in the table @ref NVIC_Priority_Table */ - - uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified - in NVIC_IRQChannel. This parameter can be a value - between 0 and 15 as described in the table @ref NVIC_Priority_Table */ - - FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel - will be enabled or disabled. - This parameter can be set either to ENABLE or DISABLE */ -} NVIC_InitTypeDef; - -/** - * @} - */ - -/** @defgroup NVIC_Priority_Table - * @{ - */ - -/** -@code - The table below gives the allowed values of the pre-emption priority and subpriority according - to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function - ============================================================================================================================ - NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description - ============================================================================================================================ - NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority - | | | 4 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority - | | | 3 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority - | | | 2 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority - | | | 1 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority - | | | 0 bits for subpriority - ============================================================================================================================ -@endcode -*/ - -/** - * @} - */ - -/** @defgroup MISC_Exported_Constants - * @{ - */ - -/** @defgroup Vector_Table_Base - * @{ - */ - -#define NVIC_VectTab_RAM ((uint32_t)0x20000000) -#define NVIC_VectTab_FLASH ((uint32_t)0x08000000) -#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ - ((VECTTAB) == NVIC_VectTab_FLASH)) -/** - * @} - */ - -/** @defgroup System_Low_Power - * @{ - */ - -#define NVIC_LP_SEVONPEND ((uint8_t)0x10) -#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) -#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) -#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ - ((LP) == NVIC_LP_SLEEPDEEP) || \ - ((LP) == NVIC_LP_SLEEPONEXIT)) -/** - * @} - */ - -/** @defgroup Preemption_Priority_Group - * @{ - */ - -#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority - 4 bits for subpriority */ -#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority - 3 bits for subpriority */ -#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority - 2 bits for subpriority */ -#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority - 1 bits for subpriority */ -#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority - 0 bits for subpriority */ - -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ - ((GROUP) == NVIC_PriorityGroup_1) || \ - ((GROUP) == NVIC_PriorityGroup_2) || \ - ((GROUP) == NVIC_PriorityGroup_3) || \ - ((GROUP) == NVIC_PriorityGroup_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF) - -/** - * @} - */ - -/** @defgroup SysTick_clock_source - * @{ - */ - -#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) -#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ - ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup MISC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup MISC_Exported_Functions - * @{ - */ - -void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); -void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); -void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset); -void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState); -void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource); - -#ifdef __cplusplus -} -#endif - -#endif /* __MISC_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h deleted file mode 100644 index d185aa2..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h +++ /dev/null @@ -1,697 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_can.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the CAN firmware - * library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CAN_H -#define __STM32F10x_CAN_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup CAN - * @{ - */ - -/** @defgroup CAN_Exported_Types - * @{ - */ - -#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \ - ((PERIPH) == CAN2)) - -/** - * @brief CAN init structure definition - */ - -typedef struct -{ - uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. - It ranges from 1 to 1024. */ - - uint8_t CAN_Mode; /*!< Specifies the CAN operating mode. - This parameter can be a value of - @ref CAN_operating_mode */ - - uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta - the CAN hardware is allowed to lengthen or - shorten a bit to perform resynchronization. - This parameter can be a value of - @ref CAN_synchronisation_jump_width */ - - uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit - Segment 1. This parameter can be a value of - @ref CAN_time_quantum_in_bit_segment_1 */ - - uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit - Segment 2. - This parameter can be a value of - @ref CAN_time_quantum_in_bit_segment_2 */ - - FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered - communication mode. This parameter can be set - either to ENABLE or DISABLE. */ - - FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off - management. This parameter can be set either - to ENABLE or DISABLE. */ - - FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode. - This parameter can be set either to ENABLE or - DISABLE. */ - - FunctionalState CAN_NART; /*!< Enable or disable the no-automatic - retransmission mode. This parameter can be - set either to ENABLE or DISABLE. */ - - FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode. - This parameter can be set either to ENABLE - or DISABLE. */ - - FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority. - This parameter can be set either to ENABLE - or DISABLE. */ -} CAN_InitTypeDef; - -/** - * @brief CAN filter init structure definition - */ - -typedef struct -{ - uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit - configuration, first one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit - configuration, second one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, - according to the mode (MSBs for a 32-bit configuration, - first one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, - according to the mode (LSBs for a 32-bit configuration, - second one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. - This parameter can be a value of @ref CAN_filter_FIFO */ - - uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */ - - uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized. - This parameter can be a value of @ref CAN_filter_mode */ - - uint8_t CAN_FilterScale; /*!< Specifies the filter scale. - This parameter can be a value of @ref CAN_filter_scale */ - - FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter. - This parameter can be set either to ENABLE or DISABLE. */ -} CAN_FilterInitTypeDef; - -/** - * @brief CAN Tx message structure definition - */ - -typedef struct -{ - uint32_t StdId; /*!< Specifies the standard identifier. - This parameter can be a value between 0 to 0x7FF. */ - - uint32_t ExtId; /*!< Specifies the extended identifier. - This parameter can be a value between 0 to 0x1FFFFFFF. */ - - uint8_t IDE; /*!< Specifies the type of identifier for the message that - will be transmitted. This parameter can be a value - of @ref CAN_identifier_type */ - - uint8_t RTR; /*!< Specifies the type of frame for the message that will - be transmitted. This parameter can be a value of - @ref CAN_remote_transmission_request */ - - uint8_t DLC; /*!< Specifies the length of the frame that will be - transmitted. This parameter can be a value between - 0 to 8 */ - - uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 - to 0xFF. */ -} CanTxMsg; - -/** - * @brief CAN Rx message structure definition - */ - -typedef struct -{ - uint32_t StdId; /*!< Specifies the standard identifier. - This parameter can be a value between 0 to 0x7FF. */ - - uint32_t ExtId; /*!< Specifies the extended identifier. - This parameter can be a value between 0 to 0x1FFFFFFF. */ - - uint8_t IDE; /*!< Specifies the type of identifier for the message that - will be received. This parameter can be a value of - @ref CAN_identifier_type */ - - uint8_t RTR; /*!< Specifies the type of frame for the received message. - This parameter can be a value of - @ref CAN_remote_transmission_request */ - - uint8_t DLC; /*!< Specifies the length of the frame that will be received. - This parameter can be a value between 0 to 8 */ - - uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to - 0xFF. */ - - uint8_t FMI; /*!< Specifies the index of the filter the message stored in - the mailbox passes through. This parameter can be a - value between 0 to 0xFF */ -} CanRxMsg; - -/** - * @} - */ - -/** @defgroup CAN_Exported_Constants - * @{ - */ - -/** @defgroup CAN_sleep_constants - * @{ - */ - -#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */ -#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */ - -/** - * @} - */ - -/** @defgroup CAN_Mode - * @{ - */ - -#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */ -#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */ -#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */ -#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */ - -#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \ - ((MODE) == CAN_Mode_LoopBack)|| \ - ((MODE) == CAN_Mode_Silent) || \ - ((MODE) == CAN_Mode_Silent_LoopBack)) -/** - * @} - */ - - -/** - * @defgroup CAN_Operating_Mode - * @{ - */ -#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */ -#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */ -#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */ - - -#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\ - ((MODE) == CAN_OperatingMode_Normal)|| \ - ((MODE) == CAN_OperatingMode_Sleep)) -/** - * @} - */ - -/** - * @defgroup CAN_Mode_Status - * @{ - */ - -#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */ -#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */ - - -/** - * @} - */ - -/** @defgroup CAN_synchronisation_jump_width - * @{ - */ - -#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */ -#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */ -#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */ -#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */ - -#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ - ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) -/** - * @} - */ - -/** @defgroup CAN_time_quantum_in_bit_segment_1 - * @{ - */ - -#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */ -#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */ -#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */ -#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */ -#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */ -#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */ -#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */ -#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */ -#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */ -#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */ -#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */ -#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */ -#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */ -#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */ -#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */ -#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */ - -#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) -/** - * @} - */ - -/** @defgroup CAN_time_quantum_in_bit_segment_2 - * @{ - */ - -#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */ -#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */ -#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */ -#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */ -#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */ -#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */ -#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */ -#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */ - -#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) - -/** - * @} - */ - -/** @defgroup CAN_clock_prescaler - * @{ - */ - -#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) - -/** - * @} - */ - -/** @defgroup CAN_filter_number - * @{ - */ -#ifndef STM32F10X_CL - #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13) -#else - #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) -#endif /* STM32F10X_CL */ -/** - * @} - */ - -/** @defgroup CAN_filter_mode - * @{ - */ - -#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */ -#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */ - -#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ - ((MODE) == CAN_FilterMode_IdList)) -/** - * @} - */ - -/** @defgroup CAN_filter_scale - * @{ - */ - -#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */ -#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */ - -#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ - ((SCALE) == CAN_FilterScale_32bit)) - -/** - * @} - */ - -/** @defgroup CAN_filter_FIFO - * @{ - */ - -#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ -#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ -#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ - ((FIFO) == CAN_FilterFIFO1)) -/** - * @} - */ - -/** @defgroup Start_bank_filter_for_slave_CAN - * @{ - */ -#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27)) -/** - * @} - */ - -/** @defgroup CAN_Tx - * @{ - */ - -#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) -#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) -#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) -#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) - -/** - * @} - */ - -/** @defgroup CAN_identifier_type - * @{ - */ - -#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */ -#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */ -#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \ - ((IDTYPE) == CAN_Id_Extended)) -/** - * @} - */ - -/** @defgroup CAN_remote_transmission_request - * @{ - */ - -#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */ -#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */ -#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) - -/** - * @} - */ - -/** @defgroup CAN_transmit_constants - * @{ - */ - -#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */ -#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */ -#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */ -#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */ - -/** - * @} - */ - -/** @defgroup CAN_receive_FIFO_number_constants - * @{ - */ - -#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ -#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ - -#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) - -/** - * @} - */ - -/** @defgroup CAN_sleep_constants - * @{ - */ - -#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */ -#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */ - -/** - * @} - */ - -/** @defgroup CAN_wake_up_constants - * @{ - */ - -#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */ -#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */ - -/** - * @} - */ - -/** - * @defgroup CAN_Error_Code_constants - * @{ - */ - -#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */ -#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */ -#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */ -#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */ -#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ -#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */ -#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */ -#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */ - - -/** - * @} - */ - -/** @defgroup CAN_flags - * @{ - */ -/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() - and CAN_ClearFlag() functions. */ -/* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function. */ - -/* Transmit Flags */ -#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */ -#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */ -#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */ - -/* Receive Flags */ -#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */ -#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */ -#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */ -#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */ -#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */ -#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */ - -/* Operating Mode Flags */ -#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */ -#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */ -/* Note: When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible. - In this case the SLAK bit can be polled.*/ - -/* Error Flags */ -#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */ -#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */ -#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */ -#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */ - -#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \ - ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \ - ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \ - ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \ - ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \ - ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \ - ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \ - ((FLAG) == CAN_FLAG_SLAK )) - -#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \ - ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \ - ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\ - ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \ - ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK)) -/** - * @} - */ - - -/** @defgroup CAN_interrupts - * @{ - */ - - - -#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/ - -/* Receive Interrupts */ -#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/ -#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/ -#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/ -#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/ -#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/ -#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/ - -/* Operating Mode Interrupts */ -#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/ -#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/ - -/* Error Interrupts */ -#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/ -#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/ -#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/ -#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/ -#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/ - -/* Flags named as Interrupts : kept only for FW compatibility */ -#define CAN_IT_RQCP0 CAN_IT_TME -#define CAN_IT_RQCP1 CAN_IT_TME -#define CAN_IT_RQCP2 CAN_IT_TME - - -#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ - ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ - ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ - ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ - ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ - ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ - ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) - -#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\ - ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\ - ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\ - ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ - ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ - ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) - -/** - * @} - */ - -/** @defgroup CAN_Legacy - * @{ - */ -#define CANINITFAILED CAN_InitStatus_Failed -#define CANINITOK CAN_InitStatus_Success -#define CAN_FilterFIFO0 CAN_Filter_FIFO0 -#define CAN_FilterFIFO1 CAN_Filter_FIFO1 -#define CAN_ID_STD CAN_Id_Standard -#define CAN_ID_EXT CAN_Id_Extended -#define CAN_RTR_DATA CAN_RTR_Data -#define CAN_RTR_REMOTE CAN_RTR_Remote -#define CANTXFAILE CAN_TxStatus_Failed -#define CANTXOK CAN_TxStatus_Ok -#define CANTXPENDING CAN_TxStatus_Pending -#define CAN_NO_MB CAN_TxStatus_NoMailBox -#define CANSLEEPFAILED CAN_Sleep_Failed -#define CANSLEEPOK CAN_Sleep_Ok -#define CANWAKEUPFAILED CAN_WakeUp_Failed -#define CANWAKEUPOK CAN_WakeUp_Ok - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup CAN_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup CAN_Exported_Functions - * @{ - */ -/* Function used to set the CAN configuration to the default reset state *****/ -void CAN_DeInit(CAN_TypeDef* CANx); - -/* Initialization and Configuration functions *********************************/ -uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct); -void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); -void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); -void CAN_SlaveStartBank(uint8_t CAN_BankNumber); -void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState); -void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState); - -/* Transmit functions *********************************************************/ -uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage); -uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox); -void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox); - -/* Receive functions **********************************************************/ -void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage); -void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber); -uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber); - - -/* Operation modes functions **************************************************/ -uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode); -uint8_t CAN_Sleep(CAN_TypeDef* CANx); -uint8_t CAN_WakeUp(CAN_TypeDef* CANx); - -/* Error management functions *************************************************/ -uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx); -uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx); -uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx); - -/* Interrupts and flags management functions **********************************/ -void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState); -FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG); -void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG); -ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT); -void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_CAN_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h deleted file mode 100644 index 3362fca..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h +++ /dev/null @@ -1,94 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_crc.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the CRC firmware - * library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CRC_H -#define __STM32F10x_CRC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup CRC - * @{ - */ - -/** @defgroup CRC_Exported_Types - * @{ - */ - -/** - * @} - */ - -/** @defgroup CRC_Exported_Constants - * @{ - */ - -/** - * @} - */ - -/** @defgroup CRC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup CRC_Exported_Functions - * @{ - */ - -void CRC_ResetDR(void); -uint32_t CRC_CalcCRC(uint32_t Data); -uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength); -uint32_t CRC_GetCRC(void); -void CRC_SetIDRegister(uint8_t IDValue); -uint8_t CRC_GetIDRegister(void); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_CRC_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h deleted file mode 100644 index 89ceb9a..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h +++ /dev/null @@ -1,119 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_dbgmcu.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the DBGMCU - * firmware library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DBGMCU_H -#define __STM32F10x_DBGMCU_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup DBGMCU - * @{ - */ - -/** @defgroup DBGMCU_Exported_Types - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Exported_Constants - * @{ - */ - -#define DBGMCU_SLEEP ((uint32_t)0x00000001) -#define DBGMCU_STOP ((uint32_t)0x00000002) -#define DBGMCU_STANDBY ((uint32_t)0x00000004) -#define DBGMCU_IWDG_STOP ((uint32_t)0x00000100) -#define DBGMCU_WWDG_STOP ((uint32_t)0x00000200) -#define DBGMCU_TIM1_STOP ((uint32_t)0x00000400) -#define DBGMCU_TIM2_STOP ((uint32_t)0x00000800) -#define DBGMCU_TIM3_STOP ((uint32_t)0x00001000) -#define DBGMCU_TIM4_STOP ((uint32_t)0x00002000) -#define DBGMCU_CAN1_STOP ((uint32_t)0x00004000) -#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) -#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) -#define DBGMCU_TIM8_STOP ((uint32_t)0x00020000) -#define DBGMCU_TIM5_STOP ((uint32_t)0x00040000) -#define DBGMCU_TIM6_STOP ((uint32_t)0x00080000) -#define DBGMCU_TIM7_STOP ((uint32_t)0x00100000) -#define DBGMCU_CAN2_STOP ((uint32_t)0x00200000) -#define DBGMCU_TIM15_STOP ((uint32_t)0x00400000) -#define DBGMCU_TIM16_STOP ((uint32_t)0x00800000) -#define DBGMCU_TIM17_STOP ((uint32_t)0x01000000) -#define DBGMCU_TIM12_STOP ((uint32_t)0x02000000) -#define DBGMCU_TIM13_STOP ((uint32_t)0x04000000) -#define DBGMCU_TIM14_STOP ((uint32_t)0x08000000) -#define DBGMCU_TIM9_STOP ((uint32_t)0x10000000) -#define DBGMCU_TIM10_STOP ((uint32_t)0x20000000) -#define DBGMCU_TIM11_STOP ((uint32_t)0x40000000) - -#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00)) -/** - * @} - */ - -/** @defgroup DBGMCU_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Exported_Functions - * @{ - */ - -uint32_t DBGMCU_GetREVID(void); -uint32_t DBGMCU_GetDEVID(void); -void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_DBGMCU_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h deleted file mode 100644 index 14275fe..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h +++ /dev/null @@ -1,439 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_dma.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the DMA firmware - * library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DMA_H -#define __STM32F10x_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/** @defgroup DMA_Exported_Types - * @{ - */ - -/** - * @brief DMA Init structure definition - */ - -typedef struct -{ - uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */ - - uint32_t DMA_MemoryBaseAddr; /*!< Specifies the memory base address for DMAy Channelx. */ - - uint32_t DMA_DIR; /*!< Specifies if the peripheral is the source or destination. - This parameter can be a value of @ref DMA_data_transfer_direction */ - - uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Channel. - The data unit is equal to the configuration set in DMA_PeripheralDataSize - or DMA_MemoryDataSize members depending in the transfer direction. */ - - uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register is incremented or not. - This parameter can be a value of @ref DMA_peripheral_incremented_mode */ - - uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register is incremented or not. - This parameter can be a value of @ref DMA_memory_incremented_mode */ - - uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_peripheral_data_size */ - - uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_memory_data_size */ - - uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Channelx. - This parameter can be a value of @ref DMA_circular_normal_mode. - @note: The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Channel */ - - uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Channelx. - This parameter can be a value of @ref DMA_priority_level */ - - uint32_t DMA_M2M; /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer. - This parameter can be a value of @ref DMA_memory_to_memory */ -}DMA_InitTypeDef; - -/** - * @} - */ - -/** @defgroup DMA_Exported_Constants - * @{ - */ - -#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \ - ((PERIPH) == DMA1_Channel2) || \ - ((PERIPH) == DMA1_Channel3) || \ - ((PERIPH) == DMA1_Channel4) || \ - ((PERIPH) == DMA1_Channel5) || \ - ((PERIPH) == DMA1_Channel6) || \ - ((PERIPH) == DMA1_Channel7) || \ - ((PERIPH) == DMA2_Channel1) || \ - ((PERIPH) == DMA2_Channel2) || \ - ((PERIPH) == DMA2_Channel3) || \ - ((PERIPH) == DMA2_Channel4) || \ - ((PERIPH) == DMA2_Channel5)) - -/** @defgroup DMA_data_transfer_direction - * @{ - */ - -#define DMA_DIR_PeripheralDST ((uint32_t)0x00000010) -#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000) -#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \ - ((DIR) == DMA_DIR_PeripheralSRC)) -/** - * @} - */ - -/** @defgroup DMA_peripheral_incremented_mode - * @{ - */ - -#define DMA_PeripheralInc_Enable ((uint32_t)0x00000040) -#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000) -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \ - ((STATE) == DMA_PeripheralInc_Disable)) -/** - * @} - */ - -/** @defgroup DMA_memory_incremented_mode - * @{ - */ - -#define DMA_MemoryInc_Enable ((uint32_t)0x00000080) -#define DMA_MemoryInc_Disable ((uint32_t)0x00000000) -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \ - ((STATE) == DMA_MemoryInc_Disable)) -/** - * @} - */ - -/** @defgroup DMA_peripheral_data_size - * @{ - */ - -#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000) -#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000100) -#define DMA_PeripheralDataSize_Word ((uint32_t)0x00000200) -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ - ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ - ((SIZE) == DMA_PeripheralDataSize_Word)) -/** - * @} - */ - -/** @defgroup DMA_memory_data_size - * @{ - */ - -#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000) -#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00000400) -#define DMA_MemoryDataSize_Word ((uint32_t)0x00000800) -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ - ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ - ((SIZE) == DMA_MemoryDataSize_Word)) -/** - * @} - */ - -/** @defgroup DMA_circular_normal_mode - * @{ - */ - -#define DMA_Mode_Circular ((uint32_t)0x00000020) -#define DMA_Mode_Normal ((uint32_t)0x00000000) -#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal)) -/** - * @} - */ - -/** @defgroup DMA_priority_level - * @{ - */ - -#define DMA_Priority_VeryHigh ((uint32_t)0x00003000) -#define DMA_Priority_High ((uint32_t)0x00002000) -#define DMA_Priority_Medium ((uint32_t)0x00001000) -#define DMA_Priority_Low ((uint32_t)0x00000000) -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \ - ((PRIORITY) == DMA_Priority_High) || \ - ((PRIORITY) == DMA_Priority_Medium) || \ - ((PRIORITY) == DMA_Priority_Low)) -/** - * @} - */ - -/** @defgroup DMA_memory_to_memory - * @{ - */ - -#define DMA_M2M_Enable ((uint32_t)0x00004000) -#define DMA_M2M_Disable ((uint32_t)0x00000000) -#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable)) - -/** - * @} - */ - -/** @defgroup DMA_interrupts_definition - * @{ - */ - -#define DMA_IT_TC ((uint32_t)0x00000002) -#define DMA_IT_HT ((uint32_t)0x00000004) -#define DMA_IT_TE ((uint32_t)0x00000008) -#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00)) - -#define DMA1_IT_GL1 ((uint32_t)0x00000001) -#define DMA1_IT_TC1 ((uint32_t)0x00000002) -#define DMA1_IT_HT1 ((uint32_t)0x00000004) -#define DMA1_IT_TE1 ((uint32_t)0x00000008) -#define DMA1_IT_GL2 ((uint32_t)0x00000010) -#define DMA1_IT_TC2 ((uint32_t)0x00000020) -#define DMA1_IT_HT2 ((uint32_t)0x00000040) -#define DMA1_IT_TE2 ((uint32_t)0x00000080) -#define DMA1_IT_GL3 ((uint32_t)0x00000100) -#define DMA1_IT_TC3 ((uint32_t)0x00000200) -#define DMA1_IT_HT3 ((uint32_t)0x00000400) -#define DMA1_IT_TE3 ((uint32_t)0x00000800) -#define DMA1_IT_GL4 ((uint32_t)0x00001000) -#define DMA1_IT_TC4 ((uint32_t)0x00002000) -#define DMA1_IT_HT4 ((uint32_t)0x00004000) -#define DMA1_IT_TE4 ((uint32_t)0x00008000) -#define DMA1_IT_GL5 ((uint32_t)0x00010000) -#define DMA1_IT_TC5 ((uint32_t)0x00020000) -#define DMA1_IT_HT5 ((uint32_t)0x00040000) -#define DMA1_IT_TE5 ((uint32_t)0x00080000) -#define DMA1_IT_GL6 ((uint32_t)0x00100000) -#define DMA1_IT_TC6 ((uint32_t)0x00200000) -#define DMA1_IT_HT6 ((uint32_t)0x00400000) -#define DMA1_IT_TE6 ((uint32_t)0x00800000) -#define DMA1_IT_GL7 ((uint32_t)0x01000000) -#define DMA1_IT_TC7 ((uint32_t)0x02000000) -#define DMA1_IT_HT7 ((uint32_t)0x04000000) -#define DMA1_IT_TE7 ((uint32_t)0x08000000) - -#define DMA2_IT_GL1 ((uint32_t)0x10000001) -#define DMA2_IT_TC1 ((uint32_t)0x10000002) -#define DMA2_IT_HT1 ((uint32_t)0x10000004) -#define DMA2_IT_TE1 ((uint32_t)0x10000008) -#define DMA2_IT_GL2 ((uint32_t)0x10000010) -#define DMA2_IT_TC2 ((uint32_t)0x10000020) -#define DMA2_IT_HT2 ((uint32_t)0x10000040) -#define DMA2_IT_TE2 ((uint32_t)0x10000080) -#define DMA2_IT_GL3 ((uint32_t)0x10000100) -#define DMA2_IT_TC3 ((uint32_t)0x10000200) -#define DMA2_IT_HT3 ((uint32_t)0x10000400) -#define DMA2_IT_TE3 ((uint32_t)0x10000800) -#define DMA2_IT_GL4 ((uint32_t)0x10001000) -#define DMA2_IT_TC4 ((uint32_t)0x10002000) -#define DMA2_IT_HT4 ((uint32_t)0x10004000) -#define DMA2_IT_TE4 ((uint32_t)0x10008000) -#define DMA2_IT_GL5 ((uint32_t)0x10010000) -#define DMA2_IT_TC5 ((uint32_t)0x10020000) -#define DMA2_IT_HT5 ((uint32_t)0x10040000) -#define DMA2_IT_TE5 ((uint32_t)0x10080000) - -#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00)) - -#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \ - ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \ - ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \ - ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \ - ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \ - ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \ - ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \ - ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \ - ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \ - ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \ - ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \ - ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \ - ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \ - ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \ - ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \ - ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \ - ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \ - ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \ - ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \ - ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \ - ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \ - ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \ - ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \ - ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5)) - -/** - * @} - */ - -/** @defgroup DMA_flags_definition - * @{ - */ -#define DMA1_FLAG_GL1 ((uint32_t)0x00000001) -#define DMA1_FLAG_TC1 ((uint32_t)0x00000002) -#define DMA1_FLAG_HT1 ((uint32_t)0x00000004) -#define DMA1_FLAG_TE1 ((uint32_t)0x00000008) -#define DMA1_FLAG_GL2 ((uint32_t)0x00000010) -#define DMA1_FLAG_TC2 ((uint32_t)0x00000020) -#define DMA1_FLAG_HT2 ((uint32_t)0x00000040) -#define DMA1_FLAG_TE2 ((uint32_t)0x00000080) -#define DMA1_FLAG_GL3 ((uint32_t)0x00000100) -#define DMA1_FLAG_TC3 ((uint32_t)0x00000200) -#define DMA1_FLAG_HT3 ((uint32_t)0x00000400) -#define DMA1_FLAG_TE3 ((uint32_t)0x00000800) -#define DMA1_FLAG_GL4 ((uint32_t)0x00001000) -#define DMA1_FLAG_TC4 ((uint32_t)0x00002000) -#define DMA1_FLAG_HT4 ((uint32_t)0x00004000) -#define DMA1_FLAG_TE4 ((uint32_t)0x00008000) -#define DMA1_FLAG_GL5 ((uint32_t)0x00010000) -#define DMA1_FLAG_TC5 ((uint32_t)0x00020000) -#define DMA1_FLAG_HT5 ((uint32_t)0x00040000) -#define DMA1_FLAG_TE5 ((uint32_t)0x00080000) -#define DMA1_FLAG_GL6 ((uint32_t)0x00100000) -#define DMA1_FLAG_TC6 ((uint32_t)0x00200000) -#define DMA1_FLAG_HT6 ((uint32_t)0x00400000) -#define DMA1_FLAG_TE6 ((uint32_t)0x00800000) -#define DMA1_FLAG_GL7 ((uint32_t)0x01000000) -#define DMA1_FLAG_TC7 ((uint32_t)0x02000000) -#define DMA1_FLAG_HT7 ((uint32_t)0x04000000) -#define DMA1_FLAG_TE7 ((uint32_t)0x08000000) - -#define DMA2_FLAG_GL1 ((uint32_t)0x10000001) -#define DMA2_FLAG_TC1 ((uint32_t)0x10000002) -#define DMA2_FLAG_HT1 ((uint32_t)0x10000004) -#define DMA2_FLAG_TE1 ((uint32_t)0x10000008) -#define DMA2_FLAG_GL2 ((uint32_t)0x10000010) -#define DMA2_FLAG_TC2 ((uint32_t)0x10000020) -#define DMA2_FLAG_HT2 ((uint32_t)0x10000040) -#define DMA2_FLAG_TE2 ((uint32_t)0x10000080) -#define DMA2_FLAG_GL3 ((uint32_t)0x10000100) -#define DMA2_FLAG_TC3 ((uint32_t)0x10000200) -#define DMA2_FLAG_HT3 ((uint32_t)0x10000400) -#define DMA2_FLAG_TE3 ((uint32_t)0x10000800) -#define DMA2_FLAG_GL4 ((uint32_t)0x10001000) -#define DMA2_FLAG_TC4 ((uint32_t)0x10002000) -#define DMA2_FLAG_HT4 ((uint32_t)0x10004000) -#define DMA2_FLAG_TE4 ((uint32_t)0x10008000) -#define DMA2_FLAG_GL5 ((uint32_t)0x10010000) -#define DMA2_FLAG_TC5 ((uint32_t)0x10020000) -#define DMA2_FLAG_HT5 ((uint32_t)0x10040000) -#define DMA2_FLAG_TE5 ((uint32_t)0x10080000) - -#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00)) - -#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \ - ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \ - ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \ - ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \ - ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \ - ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \ - ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \ - ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \ - ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \ - ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \ - ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \ - ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \ - ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \ - ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \ - ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \ - ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \ - ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \ - ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \ - ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \ - ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \ - ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \ - ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \ - ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \ - ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5)) -/** - * @} - */ - -/** @defgroup DMA_Buffer_Size - * @{ - */ - -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup DMA_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions - * @{ - */ - -void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx); -void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct); -void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); -void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState); -void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState); -void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber); -uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx); -FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG); -void DMA_ClearFlag(uint32_t DMAy_FLAG); -ITStatus DMA_GetITStatus(uint32_t DMAy_IT); -void DMA_ClearITPendingBit(uint32_t DMAy_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_DMA_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h deleted file mode 100644 index 6e1769d..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h +++ /dev/null @@ -1,733 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_fsmc.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the FSMC firmware - * library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_FSMC_H -#define __STM32F10x_FSMC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup FSMC - * @{ - */ - -/** @defgroup FSMC_Exported_Types - * @{ - */ - -/** - * @brief Timing parameters For NOR/SRAM Banks - */ - -typedef struct -{ - uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure - the duration of the address setup time. - This parameter can be a value between 0 and 0xF. - @note: It is not used with synchronous NOR Flash memories. */ - - uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure - the duration of the address hold time. - This parameter can be a value between 0 and 0xF. - @note: It is not used with synchronous NOR Flash memories.*/ - - uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure - the duration of the data setup time. - This parameter can be a value between 0 and 0xFF. - @note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */ - - uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure - the duration of the bus turnaround. - This parameter can be a value between 0 and 0xF. - @note: It is only used for multiplexed NOR Flash memories. */ - - uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles. - This parameter can be a value between 1 and 0xF. - @note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */ - - uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue - to the memory before getting the first data. - The value of this parameter depends on the memory type as shown below: - - It must be set to 0 in case of a CRAM - - It is don't care in asynchronous NOR, SRAM or ROM accesses - - It may assume a value between 0 and 0xF in NOR Flash memories - with synchronous burst mode enable */ - - uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode. - This parameter can be a value of @ref FSMC_Access_Mode */ -}FSMC_NORSRAMTimingInitTypeDef; - -/** - * @brief FSMC NOR/SRAM Init structure definition - */ - -typedef struct -{ - uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used. - This parameter can be a value of @ref FSMC_NORSRAM_Bank */ - - uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are - multiplexed on the databus or not. - This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */ - - uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to - the corresponding memory bank. - This parameter can be a value of @ref FSMC_Memory_Type */ - - uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. - This parameter can be a value of @ref FSMC_Data_Width */ - - uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, - valid only with synchronous burst Flash memories. - This parameter can be a value of @ref FSMC_Burst_Access_Mode */ - - uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, - valid only with asynchronous Flash memories. - This parameter can be a value of @ref FSMC_AsynchronousWait */ - - uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing - the Flash memory in burst mode. - This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ - - uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash - memory, valid only when accessing Flash memories in burst mode. - This parameter can be a value of @ref FSMC_Wrap_Mode */ - - uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one - clock cycle before the wait state or during the wait state, - valid only when accessing memories in burst mode. - This parameter can be a value of @ref FSMC_Wait_Timing */ - - uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC. - This parameter can be a value of @ref FSMC_Write_Operation */ - - uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait - signal, valid for Flash memory access in burst mode. - This parameter can be a value of @ref FSMC_Wait_Signal */ - - uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode. - This parameter can be a value of @ref FSMC_Extended_Mode */ - - uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation. - This parameter can be a value of @ref FSMC_Write_Burst */ - - FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/ - - FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/ -}FSMC_NORSRAMInitTypeDef; - -/** - * @brief Timing parameters For FSMC NAND and PCCARD Banks - */ - -typedef struct -{ - uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before - the command assertion for NAND-Flash read or write access - to common/Attribute or I/O memory space (depending on - the memory space timing to be configured). - This parameter can be a value between 0 and 0xFF.*/ - - uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the - command for NAND-Flash read or write access to - common/Attribute or I/O memory space (depending on the - memory space timing to be configured). - This parameter can be a number between 0x00 and 0xFF */ - - uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address - (and data for write access) after the command deassertion - for NAND-Flash read or write access to common/Attribute - or I/O memory space (depending on the memory space timing - to be configured). - This parameter can be a number between 0x00 and 0xFF */ - - uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the - databus is kept in HiZ after the start of a NAND-Flash - write access to common/Attribute or I/O memory space (depending - on the memory space timing to be configured). - This parameter can be a number between 0x00 and 0xFF */ -}FSMC_NAND_PCCARDTimingInitTypeDef; - -/** - * @brief FSMC NAND Init structure definition - */ - -typedef struct -{ - uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used. - This parameter can be a value of @ref FSMC_NAND_Bank */ - - uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank. - This parameter can be any value of @ref FSMC_Wait_feature */ - - uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. - This parameter can be any value of @ref FSMC_Data_Width */ - - uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation. - This parameter can be any value of @ref FSMC_ECC */ - - uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC. - This parameter can be any value of @ref FSMC_ECC_Page_Size */ - - uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between CLE low and RE low. - This parameter can be a value between 0 and 0xFF. */ - - uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between ALE low and RE low. - This parameter can be a number between 0x0 and 0xFF */ - - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ - - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ -}FSMC_NANDInitTypeDef; - -/** - * @brief FSMC PCCARD Init structure definition - */ - -typedef struct -{ - uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank. - This parameter can be any value of @ref FSMC_Wait_feature */ - - uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between CLE low and RE low. - This parameter can be a value between 0 and 0xFF. */ - - uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between ALE low and RE low. - This parameter can be a number between 0x0 and 0xFF */ - - - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ - - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ - - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */ -}FSMC_PCCARDInitTypeDef; - -/** - * @} - */ - -/** @defgroup FSMC_Exported_Constants - * @{ - */ - -/** @defgroup FSMC_NORSRAM_Bank - * @{ - */ -#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000) -#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002) -#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004) -#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006) -/** - * @} - */ - -/** @defgroup FSMC_NAND_Bank - * @{ - */ -#define FSMC_Bank2_NAND ((uint32_t)0x00000010) -#define FSMC_Bank3_NAND ((uint32_t)0x00000100) -/** - * @} - */ - -/** @defgroup FSMC_PCCARD_Bank - * @{ - */ -#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000) -/** - * @} - */ - -#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \ - ((BANK) == FSMC_Bank1_NORSRAM2) || \ - ((BANK) == FSMC_Bank1_NORSRAM3) || \ - ((BANK) == FSMC_Bank1_NORSRAM4)) - -#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND)) - -#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND) || \ - ((BANK) == FSMC_Bank4_PCCARD)) - -#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND) || \ - ((BANK) == FSMC_Bank4_PCCARD)) - -/** @defgroup NOR_SRAM_Controller - * @{ - */ - -/** @defgroup FSMC_Data_Address_Bus_Multiplexing - * @{ - */ - -#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000) -#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002) -#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \ - ((MUX) == FSMC_DataAddressMux_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_Memory_Type - * @{ - */ - -#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000) -#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004) -#define FSMC_MemoryType_NOR ((uint32_t)0x00000008) -#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \ - ((MEMORY) == FSMC_MemoryType_PSRAM)|| \ - ((MEMORY) == FSMC_MemoryType_NOR)) - -/** - * @} - */ - -/** @defgroup FSMC_Data_Width - * @{ - */ - -#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000) -#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010) -#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ - ((WIDTH) == FSMC_MemoryDataWidth_16b)) - -/** - * @} - */ - -/** @defgroup FSMC_Burst_Access_Mode - * @{ - */ - -#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000) -#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100) -#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \ - ((STATE) == FSMC_BurstAccessMode_Enable)) -/** - * @} - */ - -/** @defgroup FSMC_AsynchronousWait - * @{ - */ -#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000) -#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000) -#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \ - ((STATE) == FSMC_AsynchronousWait_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_Wait_Signal_Polarity - * @{ - */ - -#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000) -#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200) -#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \ - ((POLARITY) == FSMC_WaitSignalPolarity_High)) - -/** - * @} - */ - -/** @defgroup FSMC_Wrap_Mode - * @{ - */ - -#define FSMC_WrapMode_Disable ((uint32_t)0x00000000) -#define FSMC_WrapMode_Enable ((uint32_t)0x00000400) -#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \ - ((MODE) == FSMC_WrapMode_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_Wait_Timing - * @{ - */ - -#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000) -#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800) -#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \ - ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState)) - -/** - * @} - */ - -/** @defgroup FSMC_Write_Operation - * @{ - */ - -#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000) -#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000) -#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \ - ((OPERATION) == FSMC_WriteOperation_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_Wait_Signal - * @{ - */ - -#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000) -#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000) -#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \ - ((SIGNAL) == FSMC_WaitSignal_Enable)) -/** - * @} - */ - -/** @defgroup FSMC_Extended_Mode - * @{ - */ - -#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000) -#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000) - -#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \ - ((MODE) == FSMC_ExtendedMode_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_Write_Burst - * @{ - */ - -#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000) -#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000) -#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \ - ((BURST) == FSMC_WriteBurst_Enable)) -/** - * @} - */ - -/** @defgroup FSMC_Address_Setup_Time - * @{ - */ - -#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF) - -/** - * @} - */ - -/** @defgroup FSMC_Address_Hold_Time - * @{ - */ - -#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF) - -/** - * @} - */ - -/** @defgroup FSMC_Data_Setup_Time - * @{ - */ - -#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF)) - -/** - * @} - */ - -/** @defgroup FSMC_Bus_Turn_around_Duration - * @{ - */ - -#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF) - -/** - * @} - */ - -/** @defgroup FSMC_CLK_Division - * @{ - */ - -#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF) - -/** - * @} - */ - -/** @defgroup FSMC_Data_Latency - * @{ - */ - -#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF) - -/** - * @} - */ - -/** @defgroup FSMC_Access_Mode - * @{ - */ - -#define FSMC_AccessMode_A ((uint32_t)0x00000000) -#define FSMC_AccessMode_B ((uint32_t)0x10000000) -#define FSMC_AccessMode_C ((uint32_t)0x20000000) -#define FSMC_AccessMode_D ((uint32_t)0x30000000) -#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \ - ((MODE) == FSMC_AccessMode_B) || \ - ((MODE) == FSMC_AccessMode_C) || \ - ((MODE) == FSMC_AccessMode_D)) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup NAND_PCCARD_Controller - * @{ - */ - -/** @defgroup FSMC_Wait_feature - * @{ - */ - -#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000) -#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002) -#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \ - ((FEATURE) == FSMC_Waitfeature_Enable)) - -/** - * @} - */ - - -/** @defgroup FSMC_ECC - * @{ - */ - -#define FSMC_ECC_Disable ((uint32_t)0x00000000) -#define FSMC_ECC_Enable ((uint32_t)0x00000040) -#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \ - ((STATE) == FSMC_ECC_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_ECC_Page_Size - * @{ - */ - -#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000) -#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000) -#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000) -#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000) -#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000) -#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000) -#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_512Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_8192Bytes)) - -/** - * @} - */ - -/** @defgroup FSMC_TCLR_Setup_Time - * @{ - */ - -#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_TAR_Setup_Time - * @{ - */ - -#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_Setup_Time - * @{ - */ - -#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_Wait_Setup_Time - * @{ - */ - -#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_Hold_Setup_Time - * @{ - */ - -#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_HiZ_Setup_Time - * @{ - */ - -#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_Interrupt_sources - * @{ - */ - -#define FSMC_IT_RisingEdge ((uint32_t)0x00000008) -#define FSMC_IT_Level ((uint32_t)0x00000010) -#define FSMC_IT_FallingEdge ((uint32_t)0x00000020) -#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000)) -#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \ - ((IT) == FSMC_IT_Level) || \ - ((IT) == FSMC_IT_FallingEdge)) -/** - * @} - */ - -/** @defgroup FSMC_Flags - * @{ - */ - -#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001) -#define FSMC_FLAG_Level ((uint32_t)0x00000002) -#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004) -#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040) -#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \ - ((FLAG) == FSMC_FLAG_Level) || \ - ((FLAG) == FSMC_FLAG_FallingEdge) || \ - ((FLAG) == FSMC_FLAG_FEMPT)) - -#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000)) - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup FSMC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup FSMC_Exported_Functions - * @{ - */ - -void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank); -void FSMC_NANDDeInit(uint32_t FSMC_Bank); -void FSMC_PCCARDDeInit(void); -void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); -void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); -void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); -void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); -void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); -void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); -void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState); -void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState); -void FSMC_PCCARDCmd(FunctionalState NewState); -void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState); -uint32_t FSMC_GetECC(uint32_t FSMC_Bank); -void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState); -FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); -void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); -ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT); -void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_FSMC_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h deleted file mode 100644 index dd28da8..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h +++ /dev/null @@ -1,385 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_gpio.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the GPIO - * firmware library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_GPIO_H -#define __STM32F10x_GPIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup GPIO - * @{ - */ - -/** @defgroup GPIO_Exported_Types - * @{ - */ - -#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ - ((PERIPH) == GPIOB) || \ - ((PERIPH) == GPIOC) || \ - ((PERIPH) == GPIOD) || \ - ((PERIPH) == GPIOE) || \ - ((PERIPH) == GPIOF) || \ - ((PERIPH) == GPIOG)) - -/** - * @brief Output Maximum frequency selection - */ - -typedef enum -{ - GPIO_Speed_10MHz = 1, - GPIO_Speed_2MHz, - GPIO_Speed_50MHz -}GPIOSpeed_TypeDef; -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \ - ((SPEED) == GPIO_Speed_50MHz)) - -/** - * @brief Configuration Mode enumeration - */ - -typedef enum -{ GPIO_Mode_AIN = 0x0, - GPIO_Mode_IN_FLOATING = 0x04, - GPIO_Mode_IPD = 0x28, - GPIO_Mode_IPU = 0x48, - GPIO_Mode_Out_OD = 0x14, - GPIO_Mode_Out_PP = 0x10, - GPIO_Mode_AF_OD = 0x1C, - GPIO_Mode_AF_PP = 0x18 -}GPIOMode_TypeDef; - -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \ - ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \ - ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \ - ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP)) - -/** - * @brief GPIO Init structure definition - */ - -typedef struct -{ - uint16_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_pins_define */ - - GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIOSpeed_TypeDef */ - - GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIOMode_TypeDef */ -}GPIO_InitTypeDef; - - -/** - * @brief Bit_SET and Bit_RESET enumeration - */ - -typedef enum -{ Bit_RESET = 0, - Bit_SET -}BitAction; - -#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) - -/** - * @} - */ - -/** @defgroup GPIO_Exported_Constants - * @{ - */ - -/** @defgroup GPIO_pins_define - * @{ - */ - -#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ -#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ -#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ -#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ -#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ -#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ -#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ -#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ -#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ -#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ -#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ -#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ -#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ -#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ -#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ -#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ -#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */ - -#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00)) - -#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ - ((PIN) == GPIO_Pin_1) || \ - ((PIN) == GPIO_Pin_2) || \ - ((PIN) == GPIO_Pin_3) || \ - ((PIN) == GPIO_Pin_4) || \ - ((PIN) == GPIO_Pin_5) || \ - ((PIN) == GPIO_Pin_6) || \ - ((PIN) == GPIO_Pin_7) || \ - ((PIN) == GPIO_Pin_8) || \ - ((PIN) == GPIO_Pin_9) || \ - ((PIN) == GPIO_Pin_10) || \ - ((PIN) == GPIO_Pin_11) || \ - ((PIN) == GPIO_Pin_12) || \ - ((PIN) == GPIO_Pin_13) || \ - ((PIN) == GPIO_Pin_14) || \ - ((PIN) == GPIO_Pin_15)) - -/** - * @} - */ - -/** @defgroup GPIO_Remap_define - * @{ - */ - -#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Alternate Function mapping */ -#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /*!< I2C1 Alternate Function mapping */ -#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /*!< USART1 Alternate Function mapping */ -#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /*!< USART2 Alternate Function mapping */ -#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /*!< USART3 Partial Alternate Function mapping */ -#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /*!< USART3 Full Alternate Function mapping */ -#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /*!< TIM1 Partial Alternate Function mapping */ -#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /*!< TIM1 Full Alternate Function mapping */ -#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /*!< TIM2 Partial1 Alternate Function mapping */ -#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /*!< TIM2 Partial2 Alternate Function mapping */ -#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /*!< TIM2 Full Alternate Function mapping */ -#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /*!< TIM3 Partial Alternate Function mapping */ -#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /*!< TIM3 Full Alternate Function mapping */ -#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /*!< TIM4 Alternate Function mapping */ -#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /*!< CAN1 Alternate Function mapping */ -#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /*!< CAN1 Alternate Function mapping */ -#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /*!< PD01 Alternate Function mapping */ -#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /*!< LSI connected to TIM5 Channel4 input capture for calibration */ -#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /*!< ADC1 External Trigger Injected Conversion remapping */ -#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /*!< ADC1 External Trigger Regular Conversion remapping */ -#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /*!< ADC2 External Trigger Injected Conversion remapping */ -#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /*!< ADC2 External Trigger Regular Conversion remapping */ -#define GPIO_Remap_ETH ((uint32_t)0x00200020) /*!< Ethernet remapping (only for Connectivity line devices) */ -#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /*!< CAN2 remapping (only for Connectivity line devices) */ -#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */ -#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */ -#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */ -#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */ -#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected - to TIM2 Internal Trigger 1 for calibration - (only for Connectivity line devices) */ -#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */ - -#define GPIO_Remap_TIM15 ((uint32_t)0x80000001) /*!< TIM15 Alternate Function mapping (only for Value line devices) */ -#define GPIO_Remap_TIM16 ((uint32_t)0x80000002) /*!< TIM16 Alternate Function mapping (only for Value line devices) */ -#define GPIO_Remap_TIM17 ((uint32_t)0x80000004) /*!< TIM17 Alternate Function mapping (only for Value line devices) */ -#define GPIO_Remap_CEC ((uint32_t)0x80000008) /*!< CEC Alternate Function mapping (only for Value line devices) */ -#define GPIO_Remap_TIM1_DMA ((uint32_t)0x80000010) /*!< TIM1 DMA requests mapping (only for Value line devices) */ - -#define GPIO_Remap_TIM9 ((uint32_t)0x80000020) /*!< TIM9 Alternate Function mapping (only for XL-density devices) */ -#define GPIO_Remap_TIM10 ((uint32_t)0x80000040) /*!< TIM10 Alternate Function mapping (only for XL-density devices) */ -#define GPIO_Remap_TIM11 ((uint32_t)0x80000080) /*!< TIM11 Alternate Function mapping (only for XL-density devices) */ -#define GPIO_Remap_TIM13 ((uint32_t)0x80000100) /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */ -#define GPIO_Remap_TIM14 ((uint32_t)0x80000200) /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */ -#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */ - -#define GPIO_Remap_TIM67_DAC_DMA ((uint32_t)0x80000800) /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */ -#define GPIO_Remap_TIM12 ((uint32_t)0x80001000) /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */ -#define GPIO_Remap_MISC ((uint32_t)0x80002000) /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, - only for High density Value line devices) */ - -#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \ - ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \ - ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \ - ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \ - ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \ - ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \ - ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \ - ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \ - ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \ - ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \ - ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \ - ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \ - ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \ - ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \ - ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \ - ((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \ - ((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \ - ((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \ - ((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \ - ((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \ - ((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \ - ((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC)) - -/** - * @} - */ - -/** @defgroup GPIO_Port_Sources - * @{ - */ - -#define GPIO_PortSourceGPIOA ((uint8_t)0x00) -#define GPIO_PortSourceGPIOB ((uint8_t)0x01) -#define GPIO_PortSourceGPIOC ((uint8_t)0x02) -#define GPIO_PortSourceGPIOD ((uint8_t)0x03) -#define GPIO_PortSourceGPIOE ((uint8_t)0x04) -#define GPIO_PortSourceGPIOF ((uint8_t)0x05) -#define GPIO_PortSourceGPIOG ((uint8_t)0x06) -#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOE)) - -#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOG)) - -/** - * @} - */ - -/** @defgroup GPIO_Pin_sources - * @{ - */ - -#define GPIO_PinSource0 ((uint8_t)0x00) -#define GPIO_PinSource1 ((uint8_t)0x01) -#define GPIO_PinSource2 ((uint8_t)0x02) -#define GPIO_PinSource3 ((uint8_t)0x03) -#define GPIO_PinSource4 ((uint8_t)0x04) -#define GPIO_PinSource5 ((uint8_t)0x05) -#define GPIO_PinSource6 ((uint8_t)0x06) -#define GPIO_PinSource7 ((uint8_t)0x07) -#define GPIO_PinSource8 ((uint8_t)0x08) -#define GPIO_PinSource9 ((uint8_t)0x09) -#define GPIO_PinSource10 ((uint8_t)0x0A) -#define GPIO_PinSource11 ((uint8_t)0x0B) -#define GPIO_PinSource12 ((uint8_t)0x0C) -#define GPIO_PinSource13 ((uint8_t)0x0D) -#define GPIO_PinSource14 ((uint8_t)0x0E) -#define GPIO_PinSource15 ((uint8_t)0x0F) - -#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ - ((PINSOURCE) == GPIO_PinSource1) || \ - ((PINSOURCE) == GPIO_PinSource2) || \ - ((PINSOURCE) == GPIO_PinSource3) || \ - ((PINSOURCE) == GPIO_PinSource4) || \ - ((PINSOURCE) == GPIO_PinSource5) || \ - ((PINSOURCE) == GPIO_PinSource6) || \ - ((PINSOURCE) == GPIO_PinSource7) || \ - ((PINSOURCE) == GPIO_PinSource8) || \ - ((PINSOURCE) == GPIO_PinSource9) || \ - ((PINSOURCE) == GPIO_PinSource10) || \ - ((PINSOURCE) == GPIO_PinSource11) || \ - ((PINSOURCE) == GPIO_PinSource12) || \ - ((PINSOURCE) == GPIO_PinSource13) || \ - ((PINSOURCE) == GPIO_PinSource14) || \ - ((PINSOURCE) == GPIO_PinSource15)) - -/** - * @} - */ - -/** @defgroup Ethernet_Media_Interface - * @{ - */ -#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000) -#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001) - -#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \ - ((INTERFACE) == GPIO_ETH_MediaInterface_RMII)) - -/** - * @} - */ -/** - * @} - */ - -/** @defgroup GPIO_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup GPIO_Exported_Functions - * @{ - */ - -void GPIO_DeInit(GPIO_TypeDef* GPIOx); -void GPIO_AFIODeInit(void); -void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); -void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); -uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); -uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); -void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); -void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); -void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); -void GPIO_EventOutputCmd(FunctionalState NewState); -void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState); -void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); -void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_GPIO_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h deleted file mode 100644 index 1149c34..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h +++ /dev/null @@ -1,727 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_rcc.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the RCC firmware - * library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_RCC_H -#define __STM32F10x_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/** @defgroup RCC_Exported_Types - * @{ - */ - -typedef struct -{ - uint32_t SYSCLK_Frequency; /*!< returns SYSCLK clock frequency expressed in Hz */ - uint32_t HCLK_Frequency; /*!< returns HCLK clock frequency expressed in Hz */ - uint32_t PCLK1_Frequency; /*!< returns PCLK1 clock frequency expressed in Hz */ - uint32_t PCLK2_Frequency; /*!< returns PCLK2 clock frequency expressed in Hz */ - uint32_t ADCCLK_Frequency; /*!< returns ADCCLK clock frequency expressed in Hz */ -}RCC_ClocksTypeDef; - -/** - * @} - */ - -/** @defgroup RCC_Exported_Constants - * @{ - */ - -/** @defgroup HSE_configuration - * @{ - */ - -#define RCC_HSE_OFF ((uint32_t)0x00000000) -#define RCC_HSE_ON ((uint32_t)0x00010000) -#define RCC_HSE_Bypass ((uint32_t)0x00040000) -#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ - ((HSE) == RCC_HSE_Bypass)) - -/** - * @} - */ - -/** @defgroup PLL_entry_clock_source - * @{ - */ - -#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000) - -#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL) - #define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000) - #define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000) - #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ - ((SOURCE) == RCC_PLLSource_HSE_Div1) || \ - ((SOURCE) == RCC_PLLSource_HSE_Div2)) -#else - #define RCC_PLLSource_PREDIV1 ((uint32_t)0x00010000) - #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ - ((SOURCE) == RCC_PLLSource_PREDIV1)) -#endif /* STM32F10X_CL */ - -/** - * @} - */ - -/** @defgroup PLL_multiplication_factor - * @{ - */ -#ifndef STM32F10X_CL - #define RCC_PLLMul_2 ((uint32_t)0x00000000) - #define RCC_PLLMul_3 ((uint32_t)0x00040000) - #define RCC_PLLMul_4 ((uint32_t)0x00080000) - #define RCC_PLLMul_5 ((uint32_t)0x000C0000) - #define RCC_PLLMul_6 ((uint32_t)0x00100000) - #define RCC_PLLMul_7 ((uint32_t)0x00140000) - #define RCC_PLLMul_8 ((uint32_t)0x00180000) - #define RCC_PLLMul_9 ((uint32_t)0x001C0000) - #define RCC_PLLMul_10 ((uint32_t)0x00200000) - #define RCC_PLLMul_11 ((uint32_t)0x00240000) - #define RCC_PLLMul_12 ((uint32_t)0x00280000) - #define RCC_PLLMul_13 ((uint32_t)0x002C0000) - #define RCC_PLLMul_14 ((uint32_t)0x00300000) - #define RCC_PLLMul_15 ((uint32_t)0x00340000) - #define RCC_PLLMul_16 ((uint32_t)0x00380000) - #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \ - ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ - ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ - ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ - ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \ - ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \ - ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \ - ((MUL) == RCC_PLLMul_16)) - -#else - #define RCC_PLLMul_4 ((uint32_t)0x00080000) - #define RCC_PLLMul_5 ((uint32_t)0x000C0000) - #define RCC_PLLMul_6 ((uint32_t)0x00100000) - #define RCC_PLLMul_7 ((uint32_t)0x00140000) - #define RCC_PLLMul_8 ((uint32_t)0x00180000) - #define RCC_PLLMul_9 ((uint32_t)0x001C0000) - #define RCC_PLLMul_6_5 ((uint32_t)0x00340000) - - #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ - ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ - ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ - ((MUL) == RCC_PLLMul_6_5)) -#endif /* STM32F10X_CL */ -/** - * @} - */ - -/** @defgroup PREDIV1_division_factor - * @{ - */ -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) - #define RCC_PREDIV1_Div1 ((uint32_t)0x00000000) - #define RCC_PREDIV1_Div2 ((uint32_t)0x00000001) - #define RCC_PREDIV1_Div3 ((uint32_t)0x00000002) - #define RCC_PREDIV1_Div4 ((uint32_t)0x00000003) - #define RCC_PREDIV1_Div5 ((uint32_t)0x00000004) - #define RCC_PREDIV1_Div6 ((uint32_t)0x00000005) - #define RCC_PREDIV1_Div7 ((uint32_t)0x00000006) - #define RCC_PREDIV1_Div8 ((uint32_t)0x00000007) - #define RCC_PREDIV1_Div9 ((uint32_t)0x00000008) - #define RCC_PREDIV1_Div10 ((uint32_t)0x00000009) - #define RCC_PREDIV1_Div11 ((uint32_t)0x0000000A) - #define RCC_PREDIV1_Div12 ((uint32_t)0x0000000B) - #define RCC_PREDIV1_Div13 ((uint32_t)0x0000000C) - #define RCC_PREDIV1_Div14 ((uint32_t)0x0000000D) - #define RCC_PREDIV1_Div15 ((uint32_t)0x0000000E) - #define RCC_PREDIV1_Div16 ((uint32_t)0x0000000F) - - #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \ - ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \ - ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \ - ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \ - ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \ - ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \ - ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \ - ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16)) -#endif -/** - * @} - */ - - -/** @defgroup PREDIV1_clock_source - * @{ - */ -#ifdef STM32F10X_CL -/* PREDIV1 clock source (for STM32 connectivity line devices) */ - #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) - #define RCC_PREDIV1_Source_PLL2 ((uint32_t)0x00010000) - - #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \ - ((SOURCE) == RCC_PREDIV1_Source_PLL2)) -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) -/* PREDIV1 clock source (for STM32 Value line devices) */ - #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) - - #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE)) -#endif -/** - * @} - */ - -#ifdef STM32F10X_CL -/** @defgroup PREDIV2_division_factor - * @{ - */ - - #define RCC_PREDIV2_Div1 ((uint32_t)0x00000000) - #define RCC_PREDIV2_Div2 ((uint32_t)0x00000010) - #define RCC_PREDIV2_Div3 ((uint32_t)0x00000020) - #define RCC_PREDIV2_Div4 ((uint32_t)0x00000030) - #define RCC_PREDIV2_Div5 ((uint32_t)0x00000040) - #define RCC_PREDIV2_Div6 ((uint32_t)0x00000050) - #define RCC_PREDIV2_Div7 ((uint32_t)0x00000060) - #define RCC_PREDIV2_Div8 ((uint32_t)0x00000070) - #define RCC_PREDIV2_Div9 ((uint32_t)0x00000080) - #define RCC_PREDIV2_Div10 ((uint32_t)0x00000090) - #define RCC_PREDIV2_Div11 ((uint32_t)0x000000A0) - #define RCC_PREDIV2_Div12 ((uint32_t)0x000000B0) - #define RCC_PREDIV2_Div13 ((uint32_t)0x000000C0) - #define RCC_PREDIV2_Div14 ((uint32_t)0x000000D0) - #define RCC_PREDIV2_Div15 ((uint32_t)0x000000E0) - #define RCC_PREDIV2_Div16 ((uint32_t)0x000000F0) - - #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \ - ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \ - ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \ - ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \ - ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \ - ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \ - ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \ - ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16)) -/** - * @} - */ - - -/** @defgroup PLL2_multiplication_factor - * @{ - */ - - #define RCC_PLL2Mul_8 ((uint32_t)0x00000600) - #define RCC_PLL2Mul_9 ((uint32_t)0x00000700) - #define RCC_PLL2Mul_10 ((uint32_t)0x00000800) - #define RCC_PLL2Mul_11 ((uint32_t)0x00000900) - #define RCC_PLL2Mul_12 ((uint32_t)0x00000A00) - #define RCC_PLL2Mul_13 ((uint32_t)0x00000B00) - #define RCC_PLL2Mul_14 ((uint32_t)0x00000C00) - #define RCC_PLL2Mul_16 ((uint32_t)0x00000E00) - #define RCC_PLL2Mul_20 ((uint32_t)0x00000F00) - - #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9) || \ - ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \ - ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \ - ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \ - ((MUL) == RCC_PLL2Mul_20)) -/** - * @} - */ - - -/** @defgroup PLL3_multiplication_factor - * @{ - */ - - #define RCC_PLL3Mul_8 ((uint32_t)0x00006000) - #define RCC_PLL3Mul_9 ((uint32_t)0x00007000) - #define RCC_PLL3Mul_10 ((uint32_t)0x00008000) - #define RCC_PLL3Mul_11 ((uint32_t)0x00009000) - #define RCC_PLL3Mul_12 ((uint32_t)0x0000A000) - #define RCC_PLL3Mul_13 ((uint32_t)0x0000B000) - #define RCC_PLL3Mul_14 ((uint32_t)0x0000C000) - #define RCC_PLL3Mul_16 ((uint32_t)0x0000E000) - #define RCC_PLL3Mul_20 ((uint32_t)0x0000F000) - - #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9) || \ - ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \ - ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \ - ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \ - ((MUL) == RCC_PLL3Mul_20)) -/** - * @} - */ - -#endif /* STM32F10X_CL */ - - -/** @defgroup System_clock_source - * @{ - */ - -#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000) -#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001) -#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) -#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ - ((SOURCE) == RCC_SYSCLKSource_HSE) || \ - ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) -/** - * @} - */ - -/** @defgroup AHB_clock_source - * @{ - */ - -#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) -#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080) -#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090) -#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0) -#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0) -#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0) -#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0) -#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0) -#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0) -#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ - ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ - ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ - ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ - ((HCLK) == RCC_SYSCLK_Div512)) -/** - * @} - */ - -/** @defgroup APB1_APB2_clock_source - * @{ - */ - -#define RCC_HCLK_Div1 ((uint32_t)0x00000000) -#define RCC_HCLK_Div2 ((uint32_t)0x00000400) -#define RCC_HCLK_Div4 ((uint32_t)0x00000500) -#define RCC_HCLK_Div8 ((uint32_t)0x00000600) -#define RCC_HCLK_Div16 ((uint32_t)0x00000700) -#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ - ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ - ((PCLK) == RCC_HCLK_Div16)) -/** - * @} - */ - -/** @defgroup RCC_Interrupt_source - * @{ - */ - -#define RCC_IT_LSIRDY ((uint8_t)0x01) -#define RCC_IT_LSERDY ((uint8_t)0x02) -#define RCC_IT_HSIRDY ((uint8_t)0x04) -#define RCC_IT_HSERDY ((uint8_t)0x08) -#define RCC_IT_PLLRDY ((uint8_t)0x10) -#define RCC_IT_CSS ((uint8_t)0x80) - -#ifndef STM32F10X_CL - #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00)) - #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ - ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ - ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS)) - #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00)) -#else - #define RCC_IT_PLL2RDY ((uint8_t)0x20) - #define RCC_IT_PLL3RDY ((uint8_t)0x40) - #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00)) - #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ - ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ - ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \ - ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY)) - #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00) -#endif /* STM32F10X_CL */ - - -/** - * @} - */ - -#ifndef STM32F10X_CL -/** @defgroup USB_Device_clock_source - * @{ - */ - - #define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00) - #define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01) - - #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \ - ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1)) -/** - * @} - */ -#else -/** @defgroup USB_OTG_FS_clock_source - * @{ - */ - #define RCC_OTGFSCLKSource_PLLVCO_Div3 ((uint8_t)0x00) - #define RCC_OTGFSCLKSource_PLLVCO_Div2 ((uint8_t)0x01) - - #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \ - ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2)) -/** - * @} - */ -#endif /* STM32F10X_CL */ - - -#ifdef STM32F10X_CL -/** @defgroup I2S2_clock_source - * @{ - */ - #define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00) - #define RCC_I2S2CLKSource_PLL3_VCO ((uint8_t)0x01) - - #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \ - ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO)) -/** - * @} - */ - -/** @defgroup I2S3_clock_source - * @{ - */ - #define RCC_I2S3CLKSource_SYSCLK ((uint8_t)0x00) - #define RCC_I2S3CLKSource_PLL3_VCO ((uint8_t)0x01) - - #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \ - ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO)) -/** - * @} - */ -#endif /* STM32F10X_CL */ - - -/** @defgroup ADC_clock_source - * @{ - */ - -#define RCC_PCLK2_Div2 ((uint32_t)0x00000000) -#define RCC_PCLK2_Div4 ((uint32_t)0x00004000) -#define RCC_PCLK2_Div6 ((uint32_t)0x00008000) -#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000) -#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \ - ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8)) -/** - * @} - */ - -/** @defgroup LSE_configuration - * @{ - */ - -#define RCC_LSE_OFF ((uint8_t)0x00) -#define RCC_LSE_ON ((uint8_t)0x01) -#define RCC_LSE_Bypass ((uint8_t)0x04) -#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ - ((LSE) == RCC_LSE_Bypass)) -/** - * @} - */ - -/** @defgroup RTC_clock_source - * @{ - */ - -#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100) -#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200) -#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300) -#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ - ((SOURCE) == RCC_RTCCLKSource_LSI) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div128)) -/** - * @} - */ - -/** @defgroup AHB_peripheral - * @{ - */ - -#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001) -#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002) -#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004) -#define RCC_AHBPeriph_FLITF ((uint32_t)0x00000010) -#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040) - -#ifndef STM32F10X_CL - #define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100) - #define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400) - #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00)) -#else - #define RCC_AHBPeriph_OTG_FS ((uint32_t)0x00001000) - #define RCC_AHBPeriph_ETH_MAC ((uint32_t)0x00004000) - #define RCC_AHBPeriph_ETH_MAC_Tx ((uint32_t)0x00008000) - #define RCC_AHBPeriph_ETH_MAC_Rx ((uint32_t)0x00010000) - - #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00)) - #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00)) -#endif /* STM32F10X_CL */ -/** - * @} - */ - -/** @defgroup APB2_peripheral - * @{ - */ - -#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001) -#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004) -#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008) -#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010) -#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020) -#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040) -#define RCC_APB2Periph_GPIOF ((uint32_t)0x00000080) -#define RCC_APB2Periph_GPIOG ((uint32_t)0x00000100) -#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200) -#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400) -#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800) -#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000) -#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000) -#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000) -#define RCC_APB2Periph_ADC3 ((uint32_t)0x00008000) -#define RCC_APB2Periph_TIM15 ((uint32_t)0x00010000) -#define RCC_APB2Periph_TIM16 ((uint32_t)0x00020000) -#define RCC_APB2Periph_TIM17 ((uint32_t)0x00040000) -#define RCC_APB2Periph_TIM9 ((uint32_t)0x00080000) -#define RCC_APB2Periph_TIM10 ((uint32_t)0x00100000) -#define RCC_APB2Periph_TIM11 ((uint32_t)0x00200000) - -#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00)) -/** - * @} - */ - -/** @defgroup APB1_peripheral - * @{ - */ - -#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001) -#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002) -#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004) -#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008) -#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010) -#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020) -#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040) -#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080) -#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100) -#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800) -#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000) -#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000) -#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000) -#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000) -#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000) -#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000) -#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000) -#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000) -#define RCC_APB1Periph_USB ((uint32_t)0x00800000) -#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000) -#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000) -#define RCC_APB1Periph_BKP ((uint32_t)0x08000000) -#define RCC_APB1Periph_PWR ((uint32_t)0x10000000) -#define RCC_APB1Periph_DAC ((uint32_t)0x20000000) -#define RCC_APB1Periph_CEC ((uint32_t)0x40000000) - -#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00)) - -/** - * @} - */ - -/** @defgroup Clock_source_to_output_on_MCO_pin - * @{ - */ - -#define RCC_MCO_NoClock ((uint8_t)0x00) -#define RCC_MCO_SYSCLK ((uint8_t)0x04) -#define RCC_MCO_HSI ((uint8_t)0x05) -#define RCC_MCO_HSE ((uint8_t)0x06) -#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07) - -#ifndef STM32F10X_CL - #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ - ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ - ((MCO) == RCC_MCO_PLLCLK_Div2)) -#else - #define RCC_MCO_PLL2CLK ((uint8_t)0x08) - #define RCC_MCO_PLL3CLK_Div2 ((uint8_t)0x09) - #define RCC_MCO_XT1 ((uint8_t)0x0A) - #define RCC_MCO_PLL3CLK ((uint8_t)0x0B) - - #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ - ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ - ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \ - ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \ - ((MCO) == RCC_MCO_PLL3CLK)) -#endif /* STM32F10X_CL */ - -/** - * @} - */ - -/** @defgroup RCC_Flag - * @{ - */ - -#define RCC_FLAG_HSIRDY ((uint8_t)0x21) -#define RCC_FLAG_HSERDY ((uint8_t)0x31) -#define RCC_FLAG_PLLRDY ((uint8_t)0x39) -#define RCC_FLAG_LSERDY ((uint8_t)0x41) -#define RCC_FLAG_LSIRDY ((uint8_t)0x61) -#define RCC_FLAG_PINRST ((uint8_t)0x7A) -#define RCC_FLAG_PORRST ((uint8_t)0x7B) -#define RCC_FLAG_SFTRST ((uint8_t)0x7C) -#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) -#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) -#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) - -#ifndef STM32F10X_CL - #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ - ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ - ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ - ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ - ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ - ((FLAG) == RCC_FLAG_LPWRRST)) -#else - #define RCC_FLAG_PLL2RDY ((uint8_t)0x3B) - #define RCC_FLAG_PLL3RDY ((uint8_t)0x3D) - #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ - ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ - ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \ - ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ - ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ - ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ - ((FLAG) == RCC_FLAG_LPWRRST)) -#endif /* STM32F10X_CL */ - -#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup RCC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup RCC_Exported_Functions - * @{ - */ - -void RCC_DeInit(void); -void RCC_HSEConfig(uint32_t RCC_HSE); -ErrorStatus RCC_WaitForHSEStartUp(void); -void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); -void RCC_HSICmd(FunctionalState NewState); -void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul); -void RCC_PLLCmd(FunctionalState NewState); - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) - void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div); -#endif - -#ifdef STM32F10X_CL - void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div); - void RCC_PLL2Config(uint32_t RCC_PLL2Mul); - void RCC_PLL2Cmd(FunctionalState NewState); - void RCC_PLL3Config(uint32_t RCC_PLL3Mul); - void RCC_PLL3Cmd(FunctionalState NewState); -#endif /* STM32F10X_CL */ - -void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); -uint8_t RCC_GetSYSCLKSource(void); -void RCC_HCLKConfig(uint32_t RCC_SYSCLK); -void RCC_PCLK1Config(uint32_t RCC_HCLK); -void RCC_PCLK2Config(uint32_t RCC_HCLK); -void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); - -#ifndef STM32F10X_CL - void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource); -#else - void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource); -#endif /* STM32F10X_CL */ - -void RCC_ADCCLKConfig(uint32_t RCC_PCLK2); - -#ifdef STM32F10X_CL - void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource); - void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource); -#endif /* STM32F10X_CL */ - -void RCC_LSEConfig(uint8_t RCC_LSE); -void RCC_LSICmd(FunctionalState NewState); -void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); -void RCC_RTCCLKCmd(FunctionalState NewState); -void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); -void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); -void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); -void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); - -#ifdef STM32F10X_CL -void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); -#endif /* STM32F10X_CL */ - -void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); -void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); -void RCC_BackupResetCmd(FunctionalState NewState); -void RCC_ClockSecuritySystemCmd(FunctionalState NewState); -void RCC_MCOConfig(uint8_t RCC_MCO); -FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); -void RCC_ClearFlag(void); -ITStatus RCC_GetITStatus(uint8_t RCC_IT); -void RCC_ClearITPendingBit(uint8_t RCC_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_RCC_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h deleted file mode 100644 index 81c058a..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h +++ /dev/null @@ -1,531 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_sdio.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the SDIO firmware - * library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_SDIO_H -#define __STM32F10x_SDIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup SDIO - * @{ - */ - -/** @defgroup SDIO_Exported_Types - * @{ - */ - -typedef struct -{ - uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref SDIO_Clock_Edge */ - - uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is - enabled or disabled. - This parameter can be a value of @ref SDIO_Clock_Bypass */ - - uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or - disabled when the bus is idle. - This parameter can be a value of @ref SDIO_Clock_Power_Save */ - - uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width. - This parameter can be a value of @ref SDIO_Bus_Wide */ - - uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. - This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ - - uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. - This parameter can be a value between 0x00 and 0xFF. */ - -} SDIO_InitTypeDef; - -typedef struct -{ - uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent - to a card as part of a command message. If a command - contains an argument, it must be loaded into this register - before writing the command to the command register */ - - uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */ - - uint32_t SDIO_Response; /*!< Specifies the SDIO response type. - This parameter can be a value of @ref SDIO_Response_Type */ - - uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled. - This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ - - uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) - is enabled or disabled. - This parameter can be a value of @ref SDIO_CPSM_State */ -} SDIO_CmdInitTypeDef; - -typedef struct -{ - uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ - - uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */ - - uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer. - This parameter can be a value of @ref SDIO_Data_Block_Size */ - - uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer - is a read or write. - This parameter can be a value of @ref SDIO_Transfer_Direction */ - - uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode. - This parameter can be a value of @ref SDIO_Transfer_Type */ - - uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) - is enabled or disabled. - This parameter can be a value of @ref SDIO_DPSM_State */ -} SDIO_DataInitTypeDef; - -/** - * @} - */ - -/** @defgroup SDIO_Exported_Constants - * @{ - */ - -/** @defgroup SDIO_Clock_Edge - * @{ - */ - -#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000) -#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000) -#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ - ((EDGE) == SDIO_ClockEdge_Falling)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Bypass - * @{ - */ - -#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000) -#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) -#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ - ((BYPASS) == SDIO_ClockBypass_Enable)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Power_Save - * @{ - */ - -#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) -#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) -#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ - ((SAVE) == SDIO_ClockPowerSave_Enable)) -/** - * @} - */ - -/** @defgroup SDIO_Bus_Wide - * @{ - */ - -#define SDIO_BusWide_1b ((uint32_t)0x00000000) -#define SDIO_BusWide_4b ((uint32_t)0x00000800) -#define SDIO_BusWide_8b ((uint32_t)0x00001000) -#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ - ((WIDE) == SDIO_BusWide_8b)) - -/** - * @} - */ - -/** @defgroup SDIO_Hardware_Flow_Control - * @{ - */ - -#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) -#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) -#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ - ((CONTROL) == SDIO_HardwareFlowControl_Enable)) -/** - * @} - */ - -/** @defgroup SDIO_Power_State - * @{ - */ - -#define SDIO_PowerState_OFF ((uint32_t)0x00000000) -#define SDIO_PowerState_ON ((uint32_t)0x00000003) -#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) -/** - * @} - */ - - -/** @defgroup SDIO_Interrupt_sources - * @{ - */ - -#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) -#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) -#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) -#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) -#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) -#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) -#define SDIO_IT_CMDREND ((uint32_t)0x00000040) -#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) -#define SDIO_IT_DATAEND ((uint32_t)0x00000100) -#define SDIO_IT_STBITERR ((uint32_t)0x00000200) -#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) -#define SDIO_IT_CMDACT ((uint32_t)0x00000800) -#define SDIO_IT_TXACT ((uint32_t)0x00001000) -#define SDIO_IT_RXACT ((uint32_t)0x00002000) -#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) -#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) -#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) -#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) -#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) -#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) -#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) -#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) -#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) -#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) -#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) -/** - * @} - */ - -/** @defgroup SDIO_Command_Index - * @{ - */ - -#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) -/** - * @} - */ - -/** @defgroup SDIO_Response_Type - * @{ - */ - -#define SDIO_Response_No ((uint32_t)0x00000000) -#define SDIO_Response_Short ((uint32_t)0x00000040) -#define SDIO_Response_Long ((uint32_t)0x000000C0) -#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ - ((RESPONSE) == SDIO_Response_Short) || \ - ((RESPONSE) == SDIO_Response_Long)) -/** - * @} - */ - -/** @defgroup SDIO_Wait_Interrupt_State - * @{ - */ - -#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */ -#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */ -#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */ -#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ - ((WAIT) == SDIO_Wait_Pend)) -/** - * @} - */ - -/** @defgroup SDIO_CPSM_State - * @{ - */ - -#define SDIO_CPSM_Disable ((uint32_t)0x00000000) -#define SDIO_CPSM_Enable ((uint32_t)0x00000400) -#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) -/** - * @} - */ - -/** @defgroup SDIO_Response_Registers - * @{ - */ - -#define SDIO_RESP1 ((uint32_t)0x00000000) -#define SDIO_RESP2 ((uint32_t)0x00000004) -#define SDIO_RESP3 ((uint32_t)0x00000008) -#define SDIO_RESP4 ((uint32_t)0x0000000C) -#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ - ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) -/** - * @} - */ - -/** @defgroup SDIO_Data_Length - * @{ - */ - -#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) -/** - * @} - */ - -/** @defgroup SDIO_Data_Block_Size - * @{ - */ - -#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000) -#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010) -#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020) -#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030) -#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040) -#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050) -#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060) -#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070) -#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080) -#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090) -#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) -#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) -#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) -#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) -#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) -#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ - ((SIZE) == SDIO_DataBlockSize_2b) || \ - ((SIZE) == SDIO_DataBlockSize_4b) || \ - ((SIZE) == SDIO_DataBlockSize_8b) || \ - ((SIZE) == SDIO_DataBlockSize_16b) || \ - ((SIZE) == SDIO_DataBlockSize_32b) || \ - ((SIZE) == SDIO_DataBlockSize_64b) || \ - ((SIZE) == SDIO_DataBlockSize_128b) || \ - ((SIZE) == SDIO_DataBlockSize_256b) || \ - ((SIZE) == SDIO_DataBlockSize_512b) || \ - ((SIZE) == SDIO_DataBlockSize_1024b) || \ - ((SIZE) == SDIO_DataBlockSize_2048b) || \ - ((SIZE) == SDIO_DataBlockSize_4096b) || \ - ((SIZE) == SDIO_DataBlockSize_8192b) || \ - ((SIZE) == SDIO_DataBlockSize_16384b)) -/** - * @} - */ - -/** @defgroup SDIO_Transfer_Direction - * @{ - */ - -#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000) -#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) -#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ - ((DIR) == SDIO_TransferDir_ToSDIO)) -/** - * @} - */ - -/** @defgroup SDIO_Transfer_Type - * @{ - */ - -#define SDIO_TransferMode_Block ((uint32_t)0x00000000) -#define SDIO_TransferMode_Stream ((uint32_t)0x00000004) -#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ - ((MODE) == SDIO_TransferMode_Block)) -/** - * @} - */ - -/** @defgroup SDIO_DPSM_State - * @{ - */ - -#define SDIO_DPSM_Disable ((uint32_t)0x00000000) -#define SDIO_DPSM_Enable ((uint32_t)0x00000001) -#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) -/** - * @} - */ - -/** @defgroup SDIO_Flags - * @{ - */ - -#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) -#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) -#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) -#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) -#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) -#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) -#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) -#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) -#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) -#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) -#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) -#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) -#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) -#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) -#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) -#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) -#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) -#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) -#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) -#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) -#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) -#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) -#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) -#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) -#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ - ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ - ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ - ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ - ((FLAG) == SDIO_FLAG_TXUNDERR) || \ - ((FLAG) == SDIO_FLAG_RXOVERR) || \ - ((FLAG) == SDIO_FLAG_CMDREND) || \ - ((FLAG) == SDIO_FLAG_CMDSENT) || \ - ((FLAG) == SDIO_FLAG_DATAEND) || \ - ((FLAG) == SDIO_FLAG_STBITERR) || \ - ((FLAG) == SDIO_FLAG_DBCKEND) || \ - ((FLAG) == SDIO_FLAG_CMDACT) || \ - ((FLAG) == SDIO_FLAG_TXACT) || \ - ((FLAG) == SDIO_FLAG_RXACT) || \ - ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ - ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ - ((FLAG) == SDIO_FLAG_TXFIFOF) || \ - ((FLAG) == SDIO_FLAG_RXFIFOF) || \ - ((FLAG) == SDIO_FLAG_TXFIFOE) || \ - ((FLAG) == SDIO_FLAG_RXFIFOE) || \ - ((FLAG) == SDIO_FLAG_TXDAVL) || \ - ((FLAG) == SDIO_FLAG_RXDAVL) || \ - ((FLAG) == SDIO_FLAG_SDIOIT) || \ - ((FLAG) == SDIO_FLAG_CEATAEND)) - -#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) - -#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ - ((IT) == SDIO_IT_DCRCFAIL) || \ - ((IT) == SDIO_IT_CTIMEOUT) || \ - ((IT) == SDIO_IT_DTIMEOUT) || \ - ((IT) == SDIO_IT_TXUNDERR) || \ - ((IT) == SDIO_IT_RXOVERR) || \ - ((IT) == SDIO_IT_CMDREND) || \ - ((IT) == SDIO_IT_CMDSENT) || \ - ((IT) == SDIO_IT_DATAEND) || \ - ((IT) == SDIO_IT_STBITERR) || \ - ((IT) == SDIO_IT_DBCKEND) || \ - ((IT) == SDIO_IT_CMDACT) || \ - ((IT) == SDIO_IT_TXACT) || \ - ((IT) == SDIO_IT_RXACT) || \ - ((IT) == SDIO_IT_TXFIFOHE) || \ - ((IT) == SDIO_IT_RXFIFOHF) || \ - ((IT) == SDIO_IT_TXFIFOF) || \ - ((IT) == SDIO_IT_RXFIFOF) || \ - ((IT) == SDIO_IT_TXFIFOE) || \ - ((IT) == SDIO_IT_RXFIFOE) || \ - ((IT) == SDIO_IT_TXDAVL) || \ - ((IT) == SDIO_IT_RXDAVL) || \ - ((IT) == SDIO_IT_SDIOIT) || \ - ((IT) == SDIO_IT_CEATAEND)) - -#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) - -/** - * @} - */ - -/** @defgroup SDIO_Read_Wait_Mode - * @{ - */ - -#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001) -#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000) -#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ - ((MODE) == SDIO_ReadWaitMode_DATA2)) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup SDIO_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup SDIO_Exported_Functions - * @{ - */ - -void SDIO_DeInit(void); -void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); -void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); -void SDIO_ClockCmd(FunctionalState NewState); -void SDIO_SetPowerState(uint32_t SDIO_PowerState); -uint32_t SDIO_GetPowerState(void); -void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState); -void SDIO_DMACmd(FunctionalState NewState); -void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); -void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); -uint8_t SDIO_GetCommandResponse(void); -uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); -void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); -void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); -uint32_t SDIO_GetDataCounter(void); -uint32_t SDIO_ReadData(void); -void SDIO_WriteData(uint32_t Data); -uint32_t SDIO_GetFIFOCount(void); -void SDIO_StartSDIOReadWait(FunctionalState NewState); -void SDIO_StopSDIOReadWait(FunctionalState NewState); -void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); -void SDIO_SetSDIOOperation(FunctionalState NewState); -void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); -void SDIO_CommandCompletionCmd(FunctionalState NewState); -void SDIO_CEATAITCmd(FunctionalState NewState); -void SDIO_SendCEATACmd(FunctionalState NewState); -FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG); -void SDIO_ClearFlag(uint32_t SDIO_FLAG); -ITStatus SDIO_GetITStatus(uint32_t SDIO_IT); -void SDIO_ClearITPendingBit(uint32_t SDIO_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_SDIO_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h deleted file mode 100644 index 23cc26d..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h +++ /dev/null @@ -1,487 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_spi.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the SPI firmware - * library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_SPI_H -#define __STM32F10x_SPI_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup SPI - * @{ - */ - -/** @defgroup SPI_Exported_Types - * @{ - */ - -/** - * @brief SPI Init structure definition - */ - -typedef struct -{ - uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. - This parameter can be a value of @ref SPI_data_direction */ - - uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. - This parameter can be a value of @ref SPI_mode */ - - uint16_t SPI_DataSize; /*!< Specifies the SPI data size. - This parameter can be a value of @ref SPI_data_size */ - - uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. - This parameter can be a value of @ref SPI_Clock_Polarity */ - - uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. - This parameter can be a value of @ref SPI_Clock_Phase */ - - uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by - hardware (NSS pin) or by software using the SSI bit. - This parameter can be a value of @ref SPI_Slave_Select_management */ - - uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be - used to configure the transmit and receive SCK clock. - This parameter can be a value of @ref SPI_BaudRate_Prescaler. - @note The communication clock is derived from the master - clock. The slave clock does not need to be set. */ - - uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. - This parameter can be a value of @ref SPI_MSB_LSB_transmission */ - - uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ -}SPI_InitTypeDef; - -/** - * @brief I2S Init structure definition - */ - -typedef struct -{ - - uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. - This parameter can be a value of @ref I2S_Mode */ - - uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. - This parameter can be a value of @ref I2S_Standard */ - - uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. - This parameter can be a value of @ref I2S_Data_Format */ - - uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. - This parameter can be a value of @ref I2S_MCLK_Output */ - - uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. - This parameter can be a value of @ref I2S_Audio_Frequency */ - - uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. - This parameter can be a value of @ref I2S_Clock_Polarity */ -}I2S_InitTypeDef; - -/** - * @} - */ - -/** @defgroup SPI_Exported_Constants - * @{ - */ - -#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ - ((PERIPH) == SPI2) || \ - ((PERIPH) == SPI3)) - -#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \ - ((PERIPH) == SPI3)) - -/** @defgroup SPI_data_direction - * @{ - */ - -#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) -#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) -#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) -#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) -#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ - ((MODE) == SPI_Direction_2Lines_RxOnly) || \ - ((MODE) == SPI_Direction_1Line_Rx) || \ - ((MODE) == SPI_Direction_1Line_Tx)) -/** - * @} - */ - -/** @defgroup SPI_mode - * @{ - */ - -#define SPI_Mode_Master ((uint16_t)0x0104) -#define SPI_Mode_Slave ((uint16_t)0x0000) -#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ - ((MODE) == SPI_Mode_Slave)) -/** - * @} - */ - -/** @defgroup SPI_data_size - * @{ - */ - -#define SPI_DataSize_16b ((uint16_t)0x0800) -#define SPI_DataSize_8b ((uint16_t)0x0000) -#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ - ((DATASIZE) == SPI_DataSize_8b)) -/** - * @} - */ - -/** @defgroup SPI_Clock_Polarity - * @{ - */ - -#define SPI_CPOL_Low ((uint16_t)0x0000) -#define SPI_CPOL_High ((uint16_t)0x0002) -#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ - ((CPOL) == SPI_CPOL_High)) -/** - * @} - */ - -/** @defgroup SPI_Clock_Phase - * @{ - */ - -#define SPI_CPHA_1Edge ((uint16_t)0x0000) -#define SPI_CPHA_2Edge ((uint16_t)0x0001) -#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ - ((CPHA) == SPI_CPHA_2Edge)) -/** - * @} - */ - -/** @defgroup SPI_Slave_Select_management - * @{ - */ - -#define SPI_NSS_Soft ((uint16_t)0x0200) -#define SPI_NSS_Hard ((uint16_t)0x0000) -#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ - ((NSS) == SPI_NSS_Hard)) -/** - * @} - */ - -/** @defgroup SPI_BaudRate_Prescaler - * @{ - */ - -#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) -#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) -#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) -#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) -#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) -#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) -#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) -#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) -#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_256)) -/** - * @} - */ - -/** @defgroup SPI_MSB_LSB_transmission - * @{ - */ - -#define SPI_FirstBit_MSB ((uint16_t)0x0000) -#define SPI_FirstBit_LSB ((uint16_t)0x0080) -#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ - ((BIT) == SPI_FirstBit_LSB)) -/** - * @} - */ - -/** @defgroup I2S_Mode - * @{ - */ - -#define I2S_Mode_SlaveTx ((uint16_t)0x0000) -#define I2S_Mode_SlaveRx ((uint16_t)0x0100) -#define I2S_Mode_MasterTx ((uint16_t)0x0200) -#define I2S_Mode_MasterRx ((uint16_t)0x0300) -#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ - ((MODE) == I2S_Mode_SlaveRx) || \ - ((MODE) == I2S_Mode_MasterTx) || \ - ((MODE) == I2S_Mode_MasterRx) ) -/** - * @} - */ - -/** @defgroup I2S_Standard - * @{ - */ - -#define I2S_Standard_Phillips ((uint16_t)0x0000) -#define I2S_Standard_MSB ((uint16_t)0x0010) -#define I2S_Standard_LSB ((uint16_t)0x0020) -#define I2S_Standard_PCMShort ((uint16_t)0x0030) -#define I2S_Standard_PCMLong ((uint16_t)0x00B0) -#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ - ((STANDARD) == I2S_Standard_MSB) || \ - ((STANDARD) == I2S_Standard_LSB) || \ - ((STANDARD) == I2S_Standard_PCMShort) || \ - ((STANDARD) == I2S_Standard_PCMLong)) -/** - * @} - */ - -/** @defgroup I2S_Data_Format - * @{ - */ - -#define I2S_DataFormat_16b ((uint16_t)0x0000) -#define I2S_DataFormat_16bextended ((uint16_t)0x0001) -#define I2S_DataFormat_24b ((uint16_t)0x0003) -#define I2S_DataFormat_32b ((uint16_t)0x0005) -#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ - ((FORMAT) == I2S_DataFormat_16bextended) || \ - ((FORMAT) == I2S_DataFormat_24b) || \ - ((FORMAT) == I2S_DataFormat_32b)) -/** - * @} - */ - -/** @defgroup I2S_MCLK_Output - * @{ - */ - -#define I2S_MCLKOutput_Enable ((uint16_t)0x0200) -#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) -#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ - ((OUTPUT) == I2S_MCLKOutput_Disable)) -/** - * @} - */ - -/** @defgroup I2S_Audio_Frequency - * @{ - */ - -#define I2S_AudioFreq_192k ((uint32_t)192000) -#define I2S_AudioFreq_96k ((uint32_t)96000) -#define I2S_AudioFreq_48k ((uint32_t)48000) -#define I2S_AudioFreq_44k ((uint32_t)44100) -#define I2S_AudioFreq_32k ((uint32_t)32000) -#define I2S_AudioFreq_22k ((uint32_t)22050) -#define I2S_AudioFreq_16k ((uint32_t)16000) -#define I2S_AudioFreq_11k ((uint32_t)11025) -#define I2S_AudioFreq_8k ((uint32_t)8000) -#define I2S_AudioFreq_Default ((uint32_t)2) - -#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \ - ((FREQ) <= I2S_AudioFreq_192k)) || \ - ((FREQ) == I2S_AudioFreq_Default)) -/** - * @} - */ - -/** @defgroup I2S_Clock_Polarity - * @{ - */ - -#define I2S_CPOL_Low ((uint16_t)0x0000) -#define I2S_CPOL_High ((uint16_t)0x0008) -#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ - ((CPOL) == I2S_CPOL_High)) -/** - * @} - */ - -/** @defgroup SPI_I2S_DMA_transfer_requests - * @{ - */ - -#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) -#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) -#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) -/** - * @} - */ - -/** @defgroup SPI_NSS_internal_software_management - * @{ - */ - -#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) -#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) -#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ - ((INTERNAL) == SPI_NSSInternalSoft_Reset)) -/** - * @} - */ - -/** @defgroup SPI_CRC_Transmit_Receive - * @{ - */ - -#define SPI_CRC_Tx ((uint8_t)0x00) -#define SPI_CRC_Rx ((uint8_t)0x01) -#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) -/** - * @} - */ - -/** @defgroup SPI_direction_transmit_receive - * @{ - */ - -#define SPI_Direction_Rx ((uint16_t)0xBFFF) -#define SPI_Direction_Tx ((uint16_t)0x4000) -#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ - ((DIRECTION) == SPI_Direction_Tx)) -/** - * @} - */ - -/** @defgroup SPI_I2S_interrupts_definition - * @{ - */ - -#define SPI_I2S_IT_TXE ((uint8_t)0x71) -#define SPI_I2S_IT_RXNE ((uint8_t)0x60) -#define SPI_I2S_IT_ERR ((uint8_t)0x50) -#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ - ((IT) == SPI_I2S_IT_RXNE) || \ - ((IT) == SPI_I2S_IT_ERR)) -#define SPI_I2S_IT_OVR ((uint8_t)0x56) -#define SPI_IT_MODF ((uint8_t)0x55) -#define SPI_IT_CRCERR ((uint8_t)0x54) -#define I2S_IT_UDR ((uint8_t)0x53) -#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) -#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \ - ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \ - ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR)) -/** - * @} - */ - -/** @defgroup SPI_I2S_flags_definition - * @{ - */ - -#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) -#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) -#define I2S_FLAG_CHSIDE ((uint16_t)0x0004) -#define I2S_FLAG_UDR ((uint16_t)0x0008) -#define SPI_FLAG_CRCERR ((uint16_t)0x0010) -#define SPI_FLAG_MODF ((uint16_t)0x0020) -#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) -#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) -#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) -#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ - ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ - ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ - ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)) -/** - * @} - */ - -/** @defgroup SPI_CRC_polynomial - * @{ - */ - -#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup SPI_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup SPI_Exported_Functions - * @{ - */ - -void SPI_I2S_DeInit(SPI_TypeDef* SPIx); -void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); -void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); -void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); -void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); -void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); -void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); -void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data); -uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); -void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); -void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); -void SPI_TransmitCRC(SPI_TypeDef* SPIx); -void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); -uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); -uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); -void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); -FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); -void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); -ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); -void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_SPI_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h deleted file mode 100644 index 65bf76a..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h +++ /dev/null @@ -1,1164 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_tim.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the TIM firmware - * library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_TIM_H -#define __STM32F10x_TIM_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup TIM - * @{ - */ - -/** @defgroup TIM_Exported_Types - * @{ - */ - -/** - * @brief TIM Time Base Init structure definition - * @note This structure is used with all TIMx except for TIM6 and TIM7. - */ - -typedef struct -{ - uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. - This parameter can be a number between 0x0000 and 0xFFFF */ - - uint16_t TIM_CounterMode; /*!< Specifies the counter mode. - This parameter can be a value of @ref TIM_Counter_Mode */ - - uint16_t TIM_Period; /*!< Specifies the period value to be loaded into the active - Auto-Reload Register at the next update event. - This parameter must be a number between 0x0000 and 0xFFFF. */ - - uint16_t TIM_ClockDivision; /*!< Specifies the clock division. - This parameter can be a value of @ref TIM_Clock_Division_CKD */ - - uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter - reaches zero, an update event is generated and counting restarts - from the RCR value (N). - This means in PWM mode that (N+1) corresponds to: - - the number of PWM periods in edge-aligned mode - - the number of half PWM period in center-aligned mode - This parameter must be a number between 0x00 and 0xFF. - @note This parameter is valid only for TIM1 and TIM8. */ -} TIM_TimeBaseInitTypeDef; - -/** - * @brief TIM Output Compare Init structure definition - */ - -typedef struct -{ - uint16_t TIM_OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state. - This parameter can be a value of @ref TIM_Output_Compare_state */ - - uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state. - This parameter can be a value of @ref TIM_Output_Compare_N_state - @note This parameter is valid only for TIM1 and TIM8. */ - - uint16_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between 0x0000 and 0xFFFF */ - - uint16_t TIM_OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for TIM1 and TIM8. */ - - uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ - - uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ -} TIM_OCInitTypeDef; - -/** - * @brief TIM Input Capture Init structure definition - */ - -typedef struct -{ - - uint16_t TIM_Channel; /*!< Specifies the TIM channel. - This parameter can be a value of @ref TIM_Channel */ - - uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint16_t TIM_ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint16_t TIM_ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between 0x0 and 0xF */ -} TIM_ICInitTypeDef; - -/** - * @brief BDTR structure definition - * @note This structure is used only with TIM1 and TIM8. - */ - -typedef struct -{ - - uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode. - This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */ - - uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state. - This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */ - - uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters. - This parameter can be a value of @ref Lock_level */ - - uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the - switching-on of the outputs. - This parameter can be a number between 0x00 and 0xFF */ - - uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not. - This parameter can be a value of @ref Break_Input_enable_disable */ - - uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. - This parameter can be a value of @ref Break_Polarity */ - - uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. - This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ -} TIM_BDTRInitTypeDef; - -/** @defgroup TIM_Exported_constants - * @{ - */ - -#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM6) || \ - ((PERIPH) == TIM7) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM9) || \ - ((PERIPH) == TIM10)|| \ - ((PERIPH) == TIM11)|| \ - ((PERIPH) == TIM12)|| \ - ((PERIPH) == TIM13)|| \ - ((PERIPH) == TIM14)|| \ - ((PERIPH) == TIM15)|| \ - ((PERIPH) == TIM16)|| \ - ((PERIPH) == TIM17)) - -/* LIST1: TIM 1 and 8 */ -#define IS_TIM_LIST1_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM8)) - -/* LIST2: TIM 1, 8, 15 16 and 17 */ -#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM15)|| \ - ((PERIPH) == TIM16)|| \ - ((PERIPH) == TIM17)) - -/* LIST3: TIM 1, 2, 3, 4, 5 and 8 */ -#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM8)) - -/* LIST4: TIM 1, 2, 3, 4, 5, 8, 15, 16 and 17 */ -#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM15)|| \ - ((PERIPH) == TIM16)|| \ - ((PERIPH) == TIM17)) - -/* LIST5: TIM 1, 2, 3, 4, 5, 8 and 15 */ -#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM15)) - -/* LIST6: TIM 1, 2, 3, 4, 5, 8, 9, 12 and 15 */ -#define IS_TIM_LIST6_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM9) || \ - ((PERIPH) == TIM12)|| \ - ((PERIPH) == TIM15)) - -/* LIST7: TIM 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 and 15 */ -#define IS_TIM_LIST7_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM6) || \ - ((PERIPH) == TIM7) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM9) || \ - ((PERIPH) == TIM12)|| \ - ((PERIPH) == TIM15)) - -/* LIST8: TIM 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13, 14, 15, 16 and 17 */ -#define IS_TIM_LIST8_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM9) || \ - ((PERIPH) == TIM10)|| \ - ((PERIPH) == TIM11)|| \ - ((PERIPH) == TIM12)|| \ - ((PERIPH) == TIM13)|| \ - ((PERIPH) == TIM14)|| \ - ((PERIPH) == TIM15)|| \ - ((PERIPH) == TIM16)|| \ - ((PERIPH) == TIM17)) - -/* LIST9: TIM 1, 2, 3, 4, 5, 6, 7, 8, 15, 16, and 17 */ -#define IS_TIM_LIST9_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM6) || \ - ((PERIPH) == TIM7) || \ - ((PERIPH) == TIM8) || \ - ((PERIPH) == TIM15)|| \ - ((PERIPH) == TIM16)|| \ - ((PERIPH) == TIM17)) - -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_and_PWM_modes - * @{ - */ - -#define TIM_OCMode_Timing ((uint16_t)0x0000) -#define TIM_OCMode_Active ((uint16_t)0x0010) -#define TIM_OCMode_Inactive ((uint16_t)0x0020) -#define TIM_OCMode_Toggle ((uint16_t)0x0030) -#define TIM_OCMode_PWM1 ((uint16_t)0x0060) -#define TIM_OCMode_PWM2 ((uint16_t)0x0070) -#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \ - ((MODE) == TIM_OCMode_Active) || \ - ((MODE) == TIM_OCMode_Inactive) || \ - ((MODE) == TIM_OCMode_Toggle)|| \ - ((MODE) == TIM_OCMode_PWM1) || \ - ((MODE) == TIM_OCMode_PWM2)) -#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \ - ((MODE) == TIM_OCMode_Active) || \ - ((MODE) == TIM_OCMode_Inactive) || \ - ((MODE) == TIM_OCMode_Toggle)|| \ - ((MODE) == TIM_OCMode_PWM1) || \ - ((MODE) == TIM_OCMode_PWM2) || \ - ((MODE) == TIM_ForcedAction_Active) || \ - ((MODE) == TIM_ForcedAction_InActive)) -/** - * @} - */ - -/** @defgroup TIM_One_Pulse_Mode - * @{ - */ - -#define TIM_OPMode_Single ((uint16_t)0x0008) -#define TIM_OPMode_Repetitive ((uint16_t)0x0000) -#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \ - ((MODE) == TIM_OPMode_Repetitive)) -/** - * @} - */ - -/** @defgroup TIM_Channel - * @{ - */ - -#define TIM_Channel_1 ((uint16_t)0x0000) -#define TIM_Channel_2 ((uint16_t)0x0004) -#define TIM_Channel_3 ((uint16_t)0x0008) -#define TIM_Channel_4 ((uint16_t)0x000C) -#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2) || \ - ((CHANNEL) == TIM_Channel_3) || \ - ((CHANNEL) == TIM_Channel_4)) -#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2)) -#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2) || \ - ((CHANNEL) == TIM_Channel_3)) -/** - * @} - */ - -/** @defgroup TIM_Clock_Division_CKD - * @{ - */ - -#define TIM_CKD_DIV1 ((uint16_t)0x0000) -#define TIM_CKD_DIV2 ((uint16_t)0x0100) -#define TIM_CKD_DIV4 ((uint16_t)0x0200) -#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \ - ((DIV) == TIM_CKD_DIV2) || \ - ((DIV) == TIM_CKD_DIV4)) -/** - * @} - */ - -/** @defgroup TIM_Counter_Mode - * @{ - */ - -#define TIM_CounterMode_Up ((uint16_t)0x0000) -#define TIM_CounterMode_Down ((uint16_t)0x0010) -#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020) -#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040) -#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060) -#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \ - ((MODE) == TIM_CounterMode_Down) || \ - ((MODE) == TIM_CounterMode_CenterAligned1) || \ - ((MODE) == TIM_CounterMode_CenterAligned2) || \ - ((MODE) == TIM_CounterMode_CenterAligned3)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Polarity - * @{ - */ - -#define TIM_OCPolarity_High ((uint16_t)0x0000) -#define TIM_OCPolarity_Low ((uint16_t)0x0002) -#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \ - ((POLARITY) == TIM_OCPolarity_Low)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Polarity - * @{ - */ - -#define TIM_OCNPolarity_High ((uint16_t)0x0000) -#define TIM_OCNPolarity_Low ((uint16_t)0x0008) -#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \ - ((POLARITY) == TIM_OCNPolarity_Low)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_state - * @{ - */ - -#define TIM_OutputState_Disable ((uint16_t)0x0000) -#define TIM_OutputState_Enable ((uint16_t)0x0001) -#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \ - ((STATE) == TIM_OutputState_Enable)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_state - * @{ - */ - -#define TIM_OutputNState_Disable ((uint16_t)0x0000) -#define TIM_OutputNState_Enable ((uint16_t)0x0004) -#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \ - ((STATE) == TIM_OutputNState_Enable)) -/** - * @} - */ - -/** @defgroup TIM_Capture_Compare_state - * @{ - */ - -#define TIM_CCx_Enable ((uint16_t)0x0001) -#define TIM_CCx_Disable ((uint16_t)0x0000) -#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \ - ((CCX) == TIM_CCx_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Capture_Compare_N_state - * @{ - */ - -#define TIM_CCxN_Enable ((uint16_t)0x0004) -#define TIM_CCxN_Disable ((uint16_t)0x0000) -#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \ - ((CCXN) == TIM_CCxN_Disable)) -/** - * @} - */ - -/** @defgroup Break_Input_enable_disable - * @{ - */ - -#define TIM_Break_Enable ((uint16_t)0x1000) -#define TIM_Break_Disable ((uint16_t)0x0000) -#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \ - ((STATE) == TIM_Break_Disable)) -/** - * @} - */ - -/** @defgroup Break_Polarity - * @{ - */ - -#define TIM_BreakPolarity_Low ((uint16_t)0x0000) -#define TIM_BreakPolarity_High ((uint16_t)0x2000) -#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \ - ((POLARITY) == TIM_BreakPolarity_High)) -/** - * @} - */ - -/** @defgroup TIM_AOE_Bit_Set_Reset - * @{ - */ - -#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000) -#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000) -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \ - ((STATE) == TIM_AutomaticOutput_Disable)) -/** - * @} - */ - -/** @defgroup Lock_level - * @{ - */ - -#define TIM_LOCKLevel_OFF ((uint16_t)0x0000) -#define TIM_LOCKLevel_1 ((uint16_t)0x0100) -#define TIM_LOCKLevel_2 ((uint16_t)0x0200) -#define TIM_LOCKLevel_3 ((uint16_t)0x0300) -#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \ - ((LEVEL) == TIM_LOCKLevel_1) || \ - ((LEVEL) == TIM_LOCKLevel_2) || \ - ((LEVEL) == TIM_LOCKLevel_3)) -/** - * @} - */ - -/** @defgroup OSSI_Off_State_Selection_for_Idle_mode_state - * @{ - */ - -#define TIM_OSSIState_Enable ((uint16_t)0x0400) -#define TIM_OSSIState_Disable ((uint16_t)0x0000) -#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \ - ((STATE) == TIM_OSSIState_Disable)) -/** - * @} - */ - -/** @defgroup OSSR_Off_State_Selection_for_Run_mode_state - * @{ - */ - -#define TIM_OSSRState_Enable ((uint16_t)0x0800) -#define TIM_OSSRState_Disable ((uint16_t)0x0000) -#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \ - ((STATE) == TIM_OSSRState_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Idle_State - * @{ - */ - -#define TIM_OCIdleState_Set ((uint16_t)0x0100) -#define TIM_OCIdleState_Reset ((uint16_t)0x0000) -#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \ - ((STATE) == TIM_OCIdleState_Reset)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Idle_State - * @{ - */ - -#define TIM_OCNIdleState_Set ((uint16_t)0x0200) -#define TIM_OCNIdleState_Reset ((uint16_t)0x0000) -#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \ - ((STATE) == TIM_OCNIdleState_Reset)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Polarity - * @{ - */ - -#define TIM_ICPolarity_Rising ((uint16_t)0x0000) -#define TIM_ICPolarity_Falling ((uint16_t)0x0002) -#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A) -#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ - ((POLARITY) == TIM_ICPolarity_Falling)) -#define IS_TIM_IC_POLARITY_LITE(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ - ((POLARITY) == TIM_ICPolarity_Falling)|| \ - ((POLARITY) == TIM_ICPolarity_BothEdge)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Selection - * @{ - */ - -#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC1, IC2, IC3 or IC4, respectively */ -#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC2, IC1, IC4 or IC3, respectively. */ -#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */ -#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \ - ((SELECTION) == TIM_ICSelection_IndirectTI) || \ - ((SELECTION) == TIM_ICSelection_TRC)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Prescaler - * @{ - */ - -#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */ -#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */ -#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */ -#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */ -#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ - ((PRESCALER) == TIM_ICPSC_DIV2) || \ - ((PRESCALER) == TIM_ICPSC_DIV4) || \ - ((PRESCALER) == TIM_ICPSC_DIV8)) -/** - * @} - */ - -/** @defgroup TIM_interrupt_sources - * @{ - */ - -#define TIM_IT_Update ((uint16_t)0x0001) -#define TIM_IT_CC1 ((uint16_t)0x0002) -#define TIM_IT_CC2 ((uint16_t)0x0004) -#define TIM_IT_CC3 ((uint16_t)0x0008) -#define TIM_IT_CC4 ((uint16_t)0x0010) -#define TIM_IT_COM ((uint16_t)0x0020) -#define TIM_IT_Trigger ((uint16_t)0x0040) -#define TIM_IT_Break ((uint16_t)0x0080) -#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000)) - -#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \ - ((IT) == TIM_IT_CC1) || \ - ((IT) == TIM_IT_CC2) || \ - ((IT) == TIM_IT_CC3) || \ - ((IT) == TIM_IT_CC4) || \ - ((IT) == TIM_IT_COM) || \ - ((IT) == TIM_IT_Trigger) || \ - ((IT) == TIM_IT_Break)) -/** - * @} - */ - -/** @defgroup TIM_DMA_Base_address - * @{ - */ - -#define TIM_DMABase_CR1 ((uint16_t)0x0000) -#define TIM_DMABase_CR2 ((uint16_t)0x0001) -#define TIM_DMABase_SMCR ((uint16_t)0x0002) -#define TIM_DMABase_DIER ((uint16_t)0x0003) -#define TIM_DMABase_SR ((uint16_t)0x0004) -#define TIM_DMABase_EGR ((uint16_t)0x0005) -#define TIM_DMABase_CCMR1 ((uint16_t)0x0006) -#define TIM_DMABase_CCMR2 ((uint16_t)0x0007) -#define TIM_DMABase_CCER ((uint16_t)0x0008) -#define TIM_DMABase_CNT ((uint16_t)0x0009) -#define TIM_DMABase_PSC ((uint16_t)0x000A) -#define TIM_DMABase_ARR ((uint16_t)0x000B) -#define TIM_DMABase_RCR ((uint16_t)0x000C) -#define TIM_DMABase_CCR1 ((uint16_t)0x000D) -#define TIM_DMABase_CCR2 ((uint16_t)0x000E) -#define TIM_DMABase_CCR3 ((uint16_t)0x000F) -#define TIM_DMABase_CCR4 ((uint16_t)0x0010) -#define TIM_DMABase_BDTR ((uint16_t)0x0011) -#define TIM_DMABase_DCR ((uint16_t)0x0012) -#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ - ((BASE) == TIM_DMABase_CR2) || \ - ((BASE) == TIM_DMABase_SMCR) || \ - ((BASE) == TIM_DMABase_DIER) || \ - ((BASE) == TIM_DMABase_SR) || \ - ((BASE) == TIM_DMABase_EGR) || \ - ((BASE) == TIM_DMABase_CCMR1) || \ - ((BASE) == TIM_DMABase_CCMR2) || \ - ((BASE) == TIM_DMABase_CCER) || \ - ((BASE) == TIM_DMABase_CNT) || \ - ((BASE) == TIM_DMABase_PSC) || \ - ((BASE) == TIM_DMABase_ARR) || \ - ((BASE) == TIM_DMABase_RCR) || \ - ((BASE) == TIM_DMABase_CCR1) || \ - ((BASE) == TIM_DMABase_CCR2) || \ - ((BASE) == TIM_DMABase_CCR3) || \ - ((BASE) == TIM_DMABase_CCR4) || \ - ((BASE) == TIM_DMABase_BDTR) || \ - ((BASE) == TIM_DMABase_DCR)) -/** - * @} - */ - -/** @defgroup TIM_DMA_Burst_Length - * @{ - */ - -#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000) -#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100) -#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200) -#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300) -#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400) -#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500) -#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600) -#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700) -#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800) -#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900) -#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00) -#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00) -#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00) -#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00) -#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00) -#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00) -#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000) -#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100) -#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \ - ((LENGTH) == TIM_DMABurstLength_2Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_3Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_4Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_5Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_6Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_7Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_8Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_9Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_10Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_11Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_12Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_13Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_14Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_15Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_16Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_17Transfers) || \ - ((LENGTH) == TIM_DMABurstLength_18Transfers)) -/** - * @} - */ - -/** @defgroup TIM_DMA_sources - * @{ - */ - -#define TIM_DMA_Update ((uint16_t)0x0100) -#define TIM_DMA_CC1 ((uint16_t)0x0200) -#define TIM_DMA_CC2 ((uint16_t)0x0400) -#define TIM_DMA_CC3 ((uint16_t)0x0800) -#define TIM_DMA_CC4 ((uint16_t)0x1000) -#define TIM_DMA_COM ((uint16_t)0x2000) -#define TIM_DMA_Trigger ((uint16_t)0x4000) -#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) - -/** - * @} - */ - -/** @defgroup TIM_External_Trigger_Prescaler - * @{ - */ - -#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000) -#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000) -#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000) -#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000) -#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV8)) -/** - * @} - */ - -/** @defgroup TIM_Internal_Trigger_Selection - * @{ - */ - -#define TIM_TS_ITR0 ((uint16_t)0x0000) -#define TIM_TS_ITR1 ((uint16_t)0x0010) -#define TIM_TS_ITR2 ((uint16_t)0x0020) -#define TIM_TS_ITR3 ((uint16_t)0x0030) -#define TIM_TS_TI1F_ED ((uint16_t)0x0040) -#define TIM_TS_TI1FP1 ((uint16_t)0x0050) -#define TIM_TS_TI2FP2 ((uint16_t)0x0060) -#define TIM_TS_ETRF ((uint16_t)0x0070) -#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3) || \ - ((SELECTION) == TIM_TS_TI1F_ED) || \ - ((SELECTION) == TIM_TS_TI1FP1) || \ - ((SELECTION) == TIM_TS_TI2FP2) || \ - ((SELECTION) == TIM_TS_ETRF)) -#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3)) -/** - * @} - */ - -/** @defgroup TIM_TIx_External_Clock_Source - * @{ - */ - -#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050) -#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060) -#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040) -#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \ - ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \ - ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED)) -/** - * @} - */ - -/** @defgroup TIM_External_Trigger_Polarity - * @{ - */ -#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000) -#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000) -#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \ - ((POLARITY) == TIM_ExtTRGPolarity_NonInverted)) -/** - * @} - */ - -/** @defgroup TIM_Prescaler_Reload_Mode - * @{ - */ - -#define TIM_PSCReloadMode_Update ((uint16_t)0x0000) -#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001) -#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \ - ((RELOAD) == TIM_PSCReloadMode_Immediate)) -/** - * @} - */ - -/** @defgroup TIM_Forced_Action - * @{ - */ - -#define TIM_ForcedAction_Active ((uint16_t)0x0050) -#define TIM_ForcedAction_InActive ((uint16_t)0x0040) -#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \ - ((ACTION) == TIM_ForcedAction_InActive)) -/** - * @} - */ - -/** @defgroup TIM_Encoder_Mode - * @{ - */ - -#define TIM_EncoderMode_TI1 ((uint16_t)0x0001) -#define TIM_EncoderMode_TI2 ((uint16_t)0x0002) -#define TIM_EncoderMode_TI12 ((uint16_t)0x0003) -#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \ - ((MODE) == TIM_EncoderMode_TI2) || \ - ((MODE) == TIM_EncoderMode_TI12)) -/** - * @} - */ - - -/** @defgroup TIM_Event_Source - * @{ - */ - -#define TIM_EventSource_Update ((uint16_t)0x0001) -#define TIM_EventSource_CC1 ((uint16_t)0x0002) -#define TIM_EventSource_CC2 ((uint16_t)0x0004) -#define TIM_EventSource_CC3 ((uint16_t)0x0008) -#define TIM_EventSource_CC4 ((uint16_t)0x0010) -#define TIM_EventSource_COM ((uint16_t)0x0020) -#define TIM_EventSource_Trigger ((uint16_t)0x0040) -#define TIM_EventSource_Break ((uint16_t)0x0080) -#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000)) - -/** - * @} - */ - -/** @defgroup TIM_Update_Source - * @{ - */ - -#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow - or the setting of UG bit, or an update generation - through the slave mode controller. */ -#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */ -#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \ - ((SOURCE) == TIM_UpdateSource_Regular)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Preload_State - * @{ - */ - -#define TIM_OCPreload_Enable ((uint16_t)0x0008) -#define TIM_OCPreload_Disable ((uint16_t)0x0000) -#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \ - ((STATE) == TIM_OCPreload_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Fast_State - * @{ - */ - -#define TIM_OCFast_Enable ((uint16_t)0x0004) -#define TIM_OCFast_Disable ((uint16_t)0x0000) -#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \ - ((STATE) == TIM_OCFast_Disable)) - -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Clear_State - * @{ - */ - -#define TIM_OCClear_Enable ((uint16_t)0x0080) -#define TIM_OCClear_Disable ((uint16_t)0x0000) -#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \ - ((STATE) == TIM_OCClear_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Trigger_Output_Source - * @{ - */ - -#define TIM_TRGOSource_Reset ((uint16_t)0x0000) -#define TIM_TRGOSource_Enable ((uint16_t)0x0010) -#define TIM_TRGOSource_Update ((uint16_t)0x0020) -#define TIM_TRGOSource_OC1 ((uint16_t)0x0030) -#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040) -#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050) -#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060) -#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070) -#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \ - ((SOURCE) == TIM_TRGOSource_Enable) || \ - ((SOURCE) == TIM_TRGOSource_Update) || \ - ((SOURCE) == TIM_TRGOSource_OC1) || \ - ((SOURCE) == TIM_TRGOSource_OC1Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC2Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC3Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC4Ref)) -/** - * @} - */ - -/** @defgroup TIM_Slave_Mode - * @{ - */ - -#define TIM_SlaveMode_Reset ((uint16_t)0x0004) -#define TIM_SlaveMode_Gated ((uint16_t)0x0005) -#define TIM_SlaveMode_Trigger ((uint16_t)0x0006) -#define TIM_SlaveMode_External1 ((uint16_t)0x0007) -#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \ - ((MODE) == TIM_SlaveMode_Gated) || \ - ((MODE) == TIM_SlaveMode_Trigger) || \ - ((MODE) == TIM_SlaveMode_External1)) -/** - * @} - */ - -/** @defgroup TIM_Master_Slave_Mode - * @{ - */ - -#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080) -#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000) -#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \ - ((STATE) == TIM_MasterSlaveMode_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Flags - * @{ - */ - -#define TIM_FLAG_Update ((uint16_t)0x0001) -#define TIM_FLAG_CC1 ((uint16_t)0x0002) -#define TIM_FLAG_CC2 ((uint16_t)0x0004) -#define TIM_FLAG_CC3 ((uint16_t)0x0008) -#define TIM_FLAG_CC4 ((uint16_t)0x0010) -#define TIM_FLAG_COM ((uint16_t)0x0020) -#define TIM_FLAG_Trigger ((uint16_t)0x0040) -#define TIM_FLAG_Break ((uint16_t)0x0080) -#define TIM_FLAG_CC1OF ((uint16_t)0x0200) -#define TIM_FLAG_CC2OF ((uint16_t)0x0400) -#define TIM_FLAG_CC3OF ((uint16_t)0x0800) -#define TIM_FLAG_CC4OF ((uint16_t)0x1000) -#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \ - ((FLAG) == TIM_FLAG_CC1) || \ - ((FLAG) == TIM_FLAG_CC2) || \ - ((FLAG) == TIM_FLAG_CC3) || \ - ((FLAG) == TIM_FLAG_CC4) || \ - ((FLAG) == TIM_FLAG_COM) || \ - ((FLAG) == TIM_FLAG_Trigger) || \ - ((FLAG) == TIM_FLAG_Break) || \ - ((FLAG) == TIM_FLAG_CC1OF) || \ - ((FLAG) == TIM_FLAG_CC2OF) || \ - ((FLAG) == TIM_FLAG_CC3OF) || \ - ((FLAG) == TIM_FLAG_CC4OF)) - - -#define IS_TIM_CLEAR_FLAG(TIM_FLAG) ((((TIM_FLAG) & (uint16_t)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Filer_Value - * @{ - */ - -#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) -/** - * @} - */ - -/** @defgroup TIM_External_Trigger_Filter - * @{ - */ - -#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF) -/** - * @} - */ - -/** @defgroup TIM_Legacy - * @{ - */ - -#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer -#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers -#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers -#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers -#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers -#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers -#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers -#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers -#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers -#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers -#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers -#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers -#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers -#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers -#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers -#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers -#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers -#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions - * @{ - */ - -void TIM_DeInit(TIM_TypeDef* TIMx); -void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); -void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); -void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); -void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct); -void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState); -void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource); -void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength); -void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState); -void TIM_InternalClockConfig(TIM_TypeDef* TIMx); -void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); -void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, - uint16_t TIM_ICPolarity, uint16_t ICFilter); -void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter); -void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, - uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter); -void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter); -void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode); -void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode); -void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); -void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, - uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity); -void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); -void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); -void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); -void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx); -void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN); -void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode); -void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource); -void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode); -void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource); -void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); -void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode); -void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter); -void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload); -void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1); -void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2); -void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3); -void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4); -void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD); -uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx); -uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx); -uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx); -uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx); -uint16_t TIM_GetCounter(TIM_TypeDef* TIMx); -uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx); -FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); -void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); -ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT); -void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_TIM_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h deleted file mode 100644 index 162fa87..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h +++ /dev/null @@ -1,412 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_usart.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the USART - * firmware library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_USART_H -#define __STM32F10x_USART_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup USART - * @{ - */ - -/** @defgroup USART_Exported_Types - * @{ - */ - -/** - * @brief USART Init Structure definition - */ - -typedef struct -{ - uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. - The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate))) - - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */ - - uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref USART_Word_Length */ - - uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref USART_Stop_Bits */ - - uint16_t USART_Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref USART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref USART_Mode */ - - uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled - or disabled. - This parameter can be a value of @ref USART_Hardware_Flow_Control */ -} USART_InitTypeDef; - -/** - * @brief USART Clock Init Structure definition - */ - -typedef struct -{ - - uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. - This parameter can be a value of @ref USART_Clock */ - - uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock. - This parameter can be a value of @ref USART_Clock_Polarity */ - - uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref USART_Clock_Phase */ - - uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted - data bit (MSB) has to be output on the SCLK pin in synchronous mode. - This parameter can be a value of @ref USART_Last_Bit */ -} USART_ClockInitTypeDef; - -/** - * @} - */ - -/** @defgroup USART_Exported_Constants - * @{ - */ - -#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3) || \ - ((PERIPH) == UART4) || \ - ((PERIPH) == UART5)) - -#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3)) - -#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3) || \ - ((PERIPH) == UART4)) -/** @defgroup USART_Word_Length - * @{ - */ - -#define USART_WordLength_8b ((uint16_t)0x0000) -#define USART_WordLength_9b ((uint16_t)0x1000) - -#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ - ((LENGTH) == USART_WordLength_9b)) -/** - * @} - */ - -/** @defgroup USART_Stop_Bits - * @{ - */ - -#define USART_StopBits_1 ((uint16_t)0x0000) -#define USART_StopBits_0_5 ((uint16_t)0x1000) -#define USART_StopBits_2 ((uint16_t)0x2000) -#define USART_StopBits_1_5 ((uint16_t)0x3000) -#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ - ((STOPBITS) == USART_StopBits_0_5) || \ - ((STOPBITS) == USART_StopBits_2) || \ - ((STOPBITS) == USART_StopBits_1_5)) -/** - * @} - */ - -/** @defgroup USART_Parity - * @{ - */ - -#define USART_Parity_No ((uint16_t)0x0000) -#define USART_Parity_Even ((uint16_t)0x0400) -#define USART_Parity_Odd ((uint16_t)0x0600) -#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ - ((PARITY) == USART_Parity_Even) || \ - ((PARITY) == USART_Parity_Odd)) -/** - * @} - */ - -/** @defgroup USART_Mode - * @{ - */ - -#define USART_Mode_Rx ((uint16_t)0x0004) -#define USART_Mode_Tx ((uint16_t)0x0008) -#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) -/** - * @} - */ - -/** @defgroup USART_Hardware_Flow_Control - * @{ - */ -#define USART_HardwareFlowControl_None ((uint16_t)0x0000) -#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) -#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) -#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) -#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ - (((CONTROL) == USART_HardwareFlowControl_None) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS) || \ - ((CONTROL) == USART_HardwareFlowControl_CTS) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) -/** - * @} - */ - -/** @defgroup USART_Clock - * @{ - */ -#define USART_Clock_Disable ((uint16_t)0x0000) -#define USART_Clock_Enable ((uint16_t)0x0800) -#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ - ((CLOCK) == USART_Clock_Enable)) -/** - * @} - */ - -/** @defgroup USART_Clock_Polarity - * @{ - */ - -#define USART_CPOL_Low ((uint16_t)0x0000) -#define USART_CPOL_High ((uint16_t)0x0400) -#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) - -/** - * @} - */ - -/** @defgroup USART_Clock_Phase - * @{ - */ - -#define USART_CPHA_1Edge ((uint16_t)0x0000) -#define USART_CPHA_2Edge ((uint16_t)0x0200) -#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) - -/** - * @} - */ - -/** @defgroup USART_Last_Bit - * @{ - */ - -#define USART_LastBit_Disable ((uint16_t)0x0000) -#define USART_LastBit_Enable ((uint16_t)0x0100) -#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ - ((LASTBIT) == USART_LastBit_Enable)) -/** - * @} - */ - -/** @defgroup USART_Interrupt_definition - * @{ - */ - -#define USART_IT_PE ((uint16_t)0x0028) -#define USART_IT_TXE ((uint16_t)0x0727) -#define USART_IT_TC ((uint16_t)0x0626) -#define USART_IT_RXNE ((uint16_t)0x0525) -#define USART_IT_IDLE ((uint16_t)0x0424) -#define USART_IT_LBD ((uint16_t)0x0846) -#define USART_IT_CTS ((uint16_t)0x096A) -#define USART_IT_ERR ((uint16_t)0x0060) -#define USART_IT_ORE ((uint16_t)0x0360) -#define USART_IT_NE ((uint16_t)0x0260) -#define USART_IT_FE ((uint16_t)0x0160) -#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) -#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ - ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) -#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) -/** - * @} - */ - -/** @defgroup USART_DMA_Requests - * @{ - */ - -#define USART_DMAReq_Tx ((uint16_t)0x0080) -#define USART_DMAReq_Rx ((uint16_t)0x0040) -#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00)) - -/** - * @} - */ - -/** @defgroup USART_WakeUp_methods - * @{ - */ - -#define USART_WakeUp_IdleLine ((uint16_t)0x0000) -#define USART_WakeUp_AddressMark ((uint16_t)0x0800) -#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ - ((WAKEUP) == USART_WakeUp_AddressMark)) -/** - * @} - */ - -/** @defgroup USART_LIN_Break_Detection_Length - * @{ - */ - -#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) -#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) -#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ - (((LENGTH) == USART_LINBreakDetectLength_10b) || \ - ((LENGTH) == USART_LINBreakDetectLength_11b)) -/** - * @} - */ - -/** @defgroup USART_IrDA_Low_Power - * @{ - */ - -#define USART_IrDAMode_LowPower ((uint16_t)0x0004) -#define USART_IrDAMode_Normal ((uint16_t)0x0000) -#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ - ((MODE) == USART_IrDAMode_Normal)) -/** - * @} - */ - -/** @defgroup USART_Flags - * @{ - */ - -#define USART_FLAG_CTS ((uint16_t)0x0200) -#define USART_FLAG_LBD ((uint16_t)0x0100) -#define USART_FLAG_TXE ((uint16_t)0x0080) -#define USART_FLAG_TC ((uint16_t)0x0040) -#define USART_FLAG_RXNE ((uint16_t)0x0020) -#define USART_FLAG_IDLE ((uint16_t)0x0010) -#define USART_FLAG_ORE ((uint16_t)0x0008) -#define USART_FLAG_NE ((uint16_t)0x0004) -#define USART_FLAG_FE ((uint16_t)0x0002) -#define USART_FLAG_PE ((uint16_t)0x0001) -#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ - ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ - ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ - ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ - ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) - -#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00)) -#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\ - ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \ - || ((USART_FLAG) != USART_FLAG_CTS)) -#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21)) -#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) -#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup USART_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Exported_Functions - * @{ - */ - -void USART_DeInit(USART_TypeDef* USARTx); -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); -void USART_StructInit(USART_InitTypeDef* USART_InitStruct); -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); -void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); -void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); -void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp); -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength); -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); -uint16_t USART_ReceiveData(USART_TypeDef* USARTx); -void USART_SendBreak(USART_TypeDef* USARTx); -void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); -void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode); -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); -void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); -void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_USART_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c deleted file mode 100644 index c0a5e11..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c +++ /dev/null @@ -1,225 +0,0 @@ -/** - ****************************************************************************** - * @file misc.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the miscellaneous firmware functions (add-on - * to CMSIS functions). - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "misc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup MISC - * @brief MISC driver modules - * @{ - */ - -/** @defgroup MISC_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup MISC_Private_Defines - * @{ - */ - -#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) -/** - * @} - */ - -/** @defgroup MISC_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup MISC_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup MISC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup MISC_Private_Functions - * @{ - */ - -/** - * @brief Configures the priority grouping: pre-emption priority and subpriority. - * @param NVIC_PriorityGroup: specifies the priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority - * 4 bits for subpriority - * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority - * 3 bits for subpriority - * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority - * 2 bits for subpriority - * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority - * 1 bits for subpriority - * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority - * 0 bits for subpriority - * @retval None - */ -void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); - - /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ - SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; -} - -/** - * @brief Initializes the NVIC peripheral according to the specified - * parameters in the NVIC_InitStruct. - * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains - * the configuration information for the specified NVIC peripheral. - * @retval None - */ -void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) -{ - uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); - assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); - - if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) - { - /* Compute the Corresponding IRQ Priority --------------------------------*/ - tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08; - tmppre = (0x4 - tmppriority); - tmpsub = tmpsub >> tmppriority; - - tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; - tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub; - tmppriority = tmppriority << 0x04; - - NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority; - - /* Enable the Selected IRQ Channels --------------------------------------*/ - NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = - (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); - } - else - { - /* Disable the Selected IRQ Channels -------------------------------------*/ - NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = - (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); - } -} - -/** - * @brief Sets the vector table location and Offset. - * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory. - * This parameter can be one of the following values: - * @arg NVIC_VectTab_RAM - * @arg NVIC_VectTab_FLASH - * @param Offset: Vector Table base offset field. This value must be a multiple - * of 0x200. - * @retval None - */ -void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset) -{ - /* Check the parameters */ - assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); - assert_param(IS_NVIC_OFFSET(Offset)); - - SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80); -} - -/** - * @brief Selects the condition for the system to enter low power mode. - * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. - * This parameter can be one of the following values: - * @arg NVIC_LP_SEVONPEND - * @arg NVIC_LP_SLEEPDEEP - * @arg NVIC_LP_SLEEPONEXIT - * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_NVIC_LP(LowPowerMode)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - SCB->SCR |= LowPowerMode; - } - else - { - SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); - } -} - -/** - * @brief Configures the SysTick clock source. - * @param SysTick_CLKSource: specifies the SysTick clock source. - * This parameter can be one of the following values: - * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source. - * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source. - * @retval None - */ -void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); - if (SysTick_CLKSource == SysTick_CLKSource_HCLK) - { - SysTick->CTRL |= SysTick_CLKSource_HCLK; - } - else - { - SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c deleted file mode 100644 index 997eecc..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c +++ /dev/null @@ -1,308 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_bkp.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the BKP firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_bkp.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup BKP - * @brief BKP driver modules - * @{ - */ - -/** @defgroup BKP_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_Defines - * @{ - */ - -/* ------------ BKP registers bit address in the alias region --------------- */ -#define BKP_OFFSET (BKP_BASE - PERIPH_BASE) - -/* --- CR Register ----*/ - -/* Alias word address of TPAL bit */ -#define CR_OFFSET (BKP_OFFSET + 0x30) -#define TPAL_BitNumber 0x01 -#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4)) - -/* Alias word address of TPE bit */ -#define TPE_BitNumber 0x00 -#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4)) - -/* --- CSR Register ---*/ - -/* Alias word address of TPIE bit */ -#define CSR_OFFSET (BKP_OFFSET + 0x34) -#define TPIE_BitNumber 0x02 -#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4)) - -/* Alias word address of TIF bit */ -#define TIF_BitNumber 0x09 -#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4)) - -/* Alias word address of TEF bit */ -#define TEF_BitNumber 0x08 -#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4)) - -/* ---------------------- BKP registers bit mask ------------------------ */ - -/* RTCCR register bit mask */ -#define RTCCR_CAL_MASK ((uint16_t)0xFF80) -#define RTCCR_MASK ((uint16_t)0xFC7F) - -/** - * @} - */ - - -/** @defgroup BKP_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the BKP peripheral registers to their default reset values. - * @param None - * @retval None - */ -void BKP_DeInit(void) -{ - RCC_BackupResetCmd(ENABLE); - RCC_BackupResetCmd(DISABLE); -} - -/** - * @brief Configures the Tamper Pin active level. - * @param BKP_TamperPinLevel: specifies the Tamper Pin active level. - * This parameter can be one of the following values: - * @arg BKP_TamperPinLevel_High: Tamper pin active on high level - * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level - * @retval None - */ -void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel) -{ - /* Check the parameters */ - assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel)); - *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel; -} - -/** - * @brief Enables or disables the Tamper Pin activation. - * @param NewState: new state of the Tamper Pin activation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void BKP_TamperPinCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the Tamper Pin Interrupt. - * @param NewState: new state of the Tamper Pin Interrupt. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void BKP_ITConfig(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState; -} - -/** - * @brief Select the RTC output source to output on the Tamper pin. - * @param BKP_RTCOutputSource: specifies the RTC output source. - * This parameter can be one of the following values: - * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin. - * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency - * divided by 64 on the Tamper pin. - * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on - * the Tamper pin. - * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on - * the Tamper pin. - * @retval None - */ -void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource) -{ - uint16_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource)); - tmpreg = BKP->RTCCR; - /* Clear CCO, ASOE and ASOS bits */ - tmpreg &= RTCCR_MASK; - - /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */ - tmpreg |= BKP_RTCOutputSource; - /* Store the new value */ - BKP->RTCCR = tmpreg; -} - -/** - * @brief Sets RTC Clock Calibration value. - * @param CalibrationValue: specifies the RTC Clock Calibration value. - * This parameter must be a number between 0 and 0x7F. - * @retval None - */ -void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue) -{ - uint16_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue)); - tmpreg = BKP->RTCCR; - /* Clear CAL[6:0] bits */ - tmpreg &= RTCCR_CAL_MASK; - /* Set CAL[6:0] bits according to CalibrationValue value */ - tmpreg |= CalibrationValue; - /* Store the new value */ - BKP->RTCCR = tmpreg; -} - -/** - * @brief Writes user data to the specified Data Backup Register. - * @param BKP_DR: specifies the Data Backup Register. - * This parameter can be BKP_DRx where x:[1, 42] - * @param Data: data to write - * @retval None - */ -void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_BKP_DR(BKP_DR)); - - tmp = (uint32_t)BKP_BASE; - tmp += BKP_DR; - - *(__IO uint32_t *) tmp = Data; -} - -/** - * @brief Reads data from the specified Data Backup Register. - * @param BKP_DR: specifies the Data Backup Register. - * This parameter can be BKP_DRx where x:[1, 42] - * @retval The content of the specified Data Backup Register - */ -uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_BKP_DR(BKP_DR)); - - tmp = (uint32_t)BKP_BASE; - tmp += BKP_DR; - - return (*(__IO uint16_t *) tmp); -} - -/** - * @brief Checks whether the Tamper Pin Event flag is set or not. - * @param None - * @retval The new state of the Tamper Pin Event flag (SET or RESET). - */ -FlagStatus BKP_GetFlagStatus(void) -{ - return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB); -} - -/** - * @brief Clears Tamper Pin Event pending flag. - * @param None - * @retval None - */ -void BKP_ClearFlag(void) -{ - /* Set CTE bit to clear Tamper Pin Event flag */ - BKP->CSR |= BKP_CSR_CTE; -} - -/** - * @brief Checks whether the Tamper Pin Interrupt has occurred or not. - * @param None - * @retval The new state of the Tamper Pin Interrupt (SET or RESET). - */ -ITStatus BKP_GetITStatus(void) -{ - return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB); -} - -/** - * @brief Clears Tamper Pin Interrupt pending bit. - * @param None - * @retval None - */ -void BKP_ClearITPendingBit(void) -{ - /* Set CTI bit to clear Tamper Pin Interrupt pending bit */ - BKP->CSR |= BKP_CSR_CTI; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c deleted file mode 100644 index ec8e049..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c +++ /dev/null @@ -1,1415 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_can.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the CAN firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_can.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup CAN - * @brief CAN driver modules - * @{ - */ - -/** @defgroup CAN_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup CAN_Private_Defines - * @{ - */ - -/* CAN Master Control Register bits */ - -#define MCR_DBF ((uint32_t)0x00010000) /* software master reset */ - -/* CAN Mailbox Transmit Request */ -#define TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */ - -/* CAN Filter Master Register bits */ -#define FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */ - -/* Time out for INAK bit */ -#define INAK_TIMEOUT ((uint32_t)0x0000FFFF) -/* Time out for SLAK bit */ -#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF) - - - -/* Flags in TSR register */ -#define CAN_FLAGS_TSR ((uint32_t)0x08000000) -/* Flags in RF1R register */ -#define CAN_FLAGS_RF1R ((uint32_t)0x04000000) -/* Flags in RF0R register */ -#define CAN_FLAGS_RF0R ((uint32_t)0x02000000) -/* Flags in MSR register */ -#define CAN_FLAGS_MSR ((uint32_t)0x01000000) -/* Flags in ESR register */ -#define CAN_FLAGS_ESR ((uint32_t)0x00F00000) - -/* Mailboxes definition */ -#define CAN_TXMAILBOX_0 ((uint8_t)0x00) -#define CAN_TXMAILBOX_1 ((uint8_t)0x01) -#define CAN_TXMAILBOX_2 ((uint8_t)0x02) - - - -#define CAN_MODE_MASK ((uint32_t) 0x00000003) -/** - * @} - */ - -/** @defgroup CAN_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup CAN_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup CAN_Private_FunctionPrototypes - * @{ - */ - -static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit); - -/** - * @} - */ - -/** @defgroup CAN_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the CAN peripheral registers to their default reset values. - * @param CANx: where x can be 1 or 2 to select the CAN peripheral. - * @retval None. - */ -void CAN_DeInit(CAN_TypeDef* CANx) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - if (CANx == CAN1) - { - /* Enable CAN1 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE); - /* Release CAN1 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE); - } - else - { - /* Enable CAN2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE); - /* Release CAN2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE); - } -} - -/** - * @brief Initializes the CAN peripheral according to the specified - * parameters in the CAN_InitStruct. - * @param CANx: where x can be 1 or 2 to to select the CAN - * peripheral. - * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure that - * contains the configuration information for the - * CAN peripheral. - * @retval Constant indicates initialization succeed which will be - * CAN_InitStatus_Failed or CAN_InitStatus_Success. - */ -uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct) -{ - uint8_t InitStatus = CAN_InitStatus_Failed; - uint32_t wait_ack = 0x00000000; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP)); - assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode)); - assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW)); - assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1)); - assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2)); - assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler)); - - /* Exit from sleep mode */ - CANx->MCR &= (~(uint32_t)CAN_MCR_SLEEP); - - /* Request initialisation */ - CANx->MCR |= CAN_MCR_INRQ ; - - /* Wait the acknowledge */ - while (((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) - { - wait_ack++; - } - - /* Check acknowledge */ - if ((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) - { - InitStatus = CAN_InitStatus_Failed; - } - else - { - /* Set the time triggered communication mode */ - if (CAN_InitStruct->CAN_TTCM == ENABLE) - { - CANx->MCR |= CAN_MCR_TTCM; - } - else - { - CANx->MCR &= ~(uint32_t)CAN_MCR_TTCM; - } - - /* Set the automatic bus-off management */ - if (CAN_InitStruct->CAN_ABOM == ENABLE) - { - CANx->MCR |= CAN_MCR_ABOM; - } - else - { - CANx->MCR &= ~(uint32_t)CAN_MCR_ABOM; - } - - /* Set the automatic wake-up mode */ - if (CAN_InitStruct->CAN_AWUM == ENABLE) - { - CANx->MCR |= CAN_MCR_AWUM; - } - else - { - CANx->MCR &= ~(uint32_t)CAN_MCR_AWUM; - } - - /* Set the no automatic retransmission */ - if (CAN_InitStruct->CAN_NART == ENABLE) - { - CANx->MCR |= CAN_MCR_NART; - } - else - { - CANx->MCR &= ~(uint32_t)CAN_MCR_NART; - } - - /* Set the receive FIFO locked mode */ - if (CAN_InitStruct->CAN_RFLM == ENABLE) - { - CANx->MCR |= CAN_MCR_RFLM; - } - else - { - CANx->MCR &= ~(uint32_t)CAN_MCR_RFLM; - } - - /* Set the transmit FIFO priority */ - if (CAN_InitStruct->CAN_TXFP == ENABLE) - { - CANx->MCR |= CAN_MCR_TXFP; - } - else - { - CANx->MCR &= ~(uint32_t)CAN_MCR_TXFP; - } - - /* Set the bit timing register */ - CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \ - ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \ - ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \ - ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \ - ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1); - - /* Request leave initialisation */ - CANx->MCR &= ~(uint32_t)CAN_MCR_INRQ; - - /* Wait the acknowledge */ - wait_ack = 0; - - while (((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) - { - wait_ack++; - } - - /* ...and check acknowledged */ - if ((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) - { - InitStatus = CAN_InitStatus_Failed; - } - else - { - InitStatus = CAN_InitStatus_Success ; - } - } - - /* At this step, return the status of initialization */ - return InitStatus; -} - -/** - * @brief Initializes the CAN peripheral according to the specified - * parameters in the CAN_FilterInitStruct. - * @param CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef - * structure that contains the configuration - * information. - * @retval None. - */ -void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct) -{ - uint32_t filter_number_bit_pos = 0; - /* Check the parameters */ - assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber)); - assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode)); - assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale)); - assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment)); - assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation)); - - filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber; - - /* Initialisation mode for the filter */ - CAN1->FMR |= FMR_FINIT; - - /* Filter Deactivation */ - CAN1->FA1R &= ~(uint32_t)filter_number_bit_pos; - - /* Filter Scale */ - if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit) - { - /* 16-bit scale for the filter */ - CAN1->FS1R &= ~(uint32_t)filter_number_bit_pos; - - /* First 16-bit identifier and First 16-bit mask */ - /* Or First 16-bit identifier and Second 16-bit identifier */ - CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = - ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) | - (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); - - /* Second 16-bit identifier and Second 16-bit mask */ - /* Or Third 16-bit identifier and Fourth 16-bit identifier */ - CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = - ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | - (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh); - } - - if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit) - { - /* 32-bit scale for the filter */ - CAN1->FS1R |= filter_number_bit_pos; - /* 32-bit identifier or First 32-bit identifier */ - CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = - ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) | - (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); - /* 32-bit mask or Second 32-bit identifier */ - CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = - ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | - (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow); - } - - /* Filter Mode */ - if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask) - { - /*Id/Mask mode for the filter*/ - CAN1->FM1R &= ~(uint32_t)filter_number_bit_pos; - } - else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ - { - /*Identifier list mode for the filter*/ - CAN1->FM1R |= (uint32_t)filter_number_bit_pos; - } - - /* Filter FIFO assignment */ - if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0) - { - /* FIFO 0 assignation for the filter */ - CAN1->FFA1R &= ~(uint32_t)filter_number_bit_pos; - } - - if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1) - { - /* FIFO 1 assignation for the filter */ - CAN1->FFA1R |= (uint32_t)filter_number_bit_pos; - } - - /* Filter activation */ - if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE) - { - CAN1->FA1R |= filter_number_bit_pos; - } - - /* Leave the initialisation mode for the filter */ - CAN1->FMR &= ~FMR_FINIT; -} - -/** - * @brief Fills each CAN_InitStruct member with its default value. - * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure which - * will be initialized. - * @retval None. - */ -void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct) -{ - /* Reset CAN init structure parameters values */ - - /* Initialize the time triggered communication mode */ - CAN_InitStruct->CAN_TTCM = DISABLE; - - /* Initialize the automatic bus-off management */ - CAN_InitStruct->CAN_ABOM = DISABLE; - - /* Initialize the automatic wake-up mode */ - CAN_InitStruct->CAN_AWUM = DISABLE; - - /* Initialize the no automatic retransmission */ - CAN_InitStruct->CAN_NART = DISABLE; - - /* Initialize the receive FIFO locked mode */ - CAN_InitStruct->CAN_RFLM = DISABLE; - - /* Initialize the transmit FIFO priority */ - CAN_InitStruct->CAN_TXFP = DISABLE; - - /* Initialize the CAN_Mode member */ - CAN_InitStruct->CAN_Mode = CAN_Mode_Normal; - - /* Initialize the CAN_SJW member */ - CAN_InitStruct->CAN_SJW = CAN_SJW_1tq; - - /* Initialize the CAN_BS1 member */ - CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq; - - /* Initialize the CAN_BS2 member */ - CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq; - - /* Initialize the CAN_Prescaler member */ - CAN_InitStruct->CAN_Prescaler = 1; -} - -/** - * @brief Select the start bank filter for slave CAN. - * @note This function applies only to STM32 Connectivity line devices. - * @param CAN_BankNumber: Select the start slave bank filter from 1..27. - * @retval None. - */ -void CAN_SlaveStartBank(uint8_t CAN_BankNumber) -{ - /* Check the parameters */ - assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber)); - - /* Enter Initialisation mode for the filter */ - CAN1->FMR |= FMR_FINIT; - - /* Select the start slave bank */ - CAN1->FMR &= (uint32_t)0xFFFFC0F1 ; - CAN1->FMR |= (uint32_t)(CAN_BankNumber)<<8; - - /* Leave Initialisation mode for the filter */ - CAN1->FMR &= ~FMR_FINIT; -} - -/** - * @brief Enables or disables the DBG Freeze for CAN. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param NewState: new state of the CAN peripheral. This parameter can - * be: ENABLE or DISABLE. - * @retval None. - */ -void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable Debug Freeze */ - CANx->MCR |= MCR_DBF; - } - else - { - /* Disable Debug Freeze */ - CANx->MCR &= ~MCR_DBF; - } -} - - -/** - * @brief Enables or disabes the CAN Time TriggerOperation communication mode. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param NewState : Mode new state , can be one of @ref FunctionalState. - * @note when enabled, Time stamp (TIME[15:0]) value is sent in the last - * two data bytes of the 8-byte message: TIME[7:0] in data byte 6 - * and TIME[15:8] in data byte 7 - * @note DLC must be programmed as 8 in order Time Stamp (2 bytes) to be - * sent over the CAN bus. - * @retval None - */ -void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the TTCM mode */ - CANx->MCR |= CAN_MCR_TTCM; - - /* Set TGT bits */ - CANx->sTxMailBox[0].TDTR |= ((uint32_t)CAN_TDT0R_TGT); - CANx->sTxMailBox[1].TDTR |= ((uint32_t)CAN_TDT1R_TGT); - CANx->sTxMailBox[2].TDTR |= ((uint32_t)CAN_TDT2R_TGT); - } - else - { - /* Disable the TTCM mode */ - CANx->MCR &= (uint32_t)(~(uint32_t)CAN_MCR_TTCM); - - /* Reset TGT bits */ - CANx->sTxMailBox[0].TDTR &= ((uint32_t)~CAN_TDT0R_TGT); - CANx->sTxMailBox[1].TDTR &= ((uint32_t)~CAN_TDT1R_TGT); - CANx->sTxMailBox[2].TDTR &= ((uint32_t)~CAN_TDT2R_TGT); - } -} -/** - * @brief Initiates the transmission of a message. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param TxMessage: pointer to a structure which contains CAN Id, CAN - * DLC and CAN data. - * @retval The number of the mailbox that is used for transmission - * or CAN_TxStatus_NoMailBox if there is no empty mailbox. - */ -uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage) -{ - uint8_t transmit_mailbox = 0; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_IDTYPE(TxMessage->IDE)); - assert_param(IS_CAN_RTR(TxMessage->RTR)); - assert_param(IS_CAN_DLC(TxMessage->DLC)); - - /* Select one empty transmit mailbox */ - if ((CANx->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) - { - transmit_mailbox = 0; - } - else if ((CANx->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) - { - transmit_mailbox = 1; - } - else if ((CANx->TSR&CAN_TSR_TME2) == CAN_TSR_TME2) - { - transmit_mailbox = 2; - } - else - { - transmit_mailbox = CAN_TxStatus_NoMailBox; - } - - if (transmit_mailbox != CAN_TxStatus_NoMailBox) - { - /* Set up the Id */ - CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ; - if (TxMessage->IDE == CAN_Id_Standard) - { - assert_param(IS_CAN_STDID(TxMessage->StdId)); - CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | \ - TxMessage->RTR); - } - else - { - assert_param(IS_CAN_EXTID(TxMessage->ExtId)); - CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId << 3) | \ - TxMessage->IDE | \ - TxMessage->RTR); - } - - /* Set up the DLC */ - TxMessage->DLC &= (uint8_t)0x0000000F; - CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0; - CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC; - - /* Set up the data field */ - CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) | - ((uint32_t)TxMessage->Data[2] << 16) | - ((uint32_t)TxMessage->Data[1] << 8) | - ((uint32_t)TxMessage->Data[0])); - CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) | - ((uint32_t)TxMessage->Data[6] << 16) | - ((uint32_t)TxMessage->Data[5] << 8) | - ((uint32_t)TxMessage->Data[4])); - /* Request transmission */ - CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ; - } - return transmit_mailbox; -} - -/** - * @brief Checks the transmission of a message. - * @param CANx: where x can be 1 or 2 to to select the - * CAN peripheral. - * @param TransmitMailbox: the number of the mailbox that is used for - * transmission. - * @retval CAN_TxStatus_Ok if the CAN driver transmits the message, CAN_TxStatus_Failed - * in an other case. - */ -uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox) -{ - uint32_t state = 0; - - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox)); - - switch (TransmitMailbox) - { - case (CAN_TXMAILBOX_0): - state = CANx->TSR & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0); - break; - case (CAN_TXMAILBOX_1): - state = CANx->TSR & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1); - break; - case (CAN_TXMAILBOX_2): - state = CANx->TSR & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2); - break; - default: - state = CAN_TxStatus_Failed; - break; - } - switch (state) - { - /* transmit pending */ - case (0x0): state = CAN_TxStatus_Pending; - break; - /* transmit failed */ - case (CAN_TSR_RQCP0 | CAN_TSR_TME0): state = CAN_TxStatus_Failed; - break; - case (CAN_TSR_RQCP1 | CAN_TSR_TME1): state = CAN_TxStatus_Failed; - break; - case (CAN_TSR_RQCP2 | CAN_TSR_TME2): state = CAN_TxStatus_Failed; - break; - /* transmit succeeded */ - case (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0):state = CAN_TxStatus_Ok; - break; - case (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1):state = CAN_TxStatus_Ok; - break; - case (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2):state = CAN_TxStatus_Ok; - break; - default: state = CAN_TxStatus_Failed; - break; - } - return (uint8_t) state; -} - -/** - * @brief Cancels a transmit request. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param Mailbox: Mailbox number. - * @retval None. - */ -void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox)); - /* abort transmission */ - switch (Mailbox) - { - case (CAN_TXMAILBOX_0): CANx->TSR |= CAN_TSR_ABRQ0; - break; - case (CAN_TXMAILBOX_1): CANx->TSR |= CAN_TSR_ABRQ1; - break; - case (CAN_TXMAILBOX_2): CANx->TSR |= CAN_TSR_ABRQ2; - break; - default: - break; - } -} - - -/** - * @brief Receives a message. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. - * @param RxMessage: pointer to a structure receive message which contains - * CAN Id, CAN DLC, CAN datas and FMI number. - * @retval None. - */ -void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_FIFO(FIFONumber)); - /* Get the Id */ - RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR; - if (RxMessage->IDE == CAN_Id_Standard) - { - RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21); - } - else - { - RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3); - } - - RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR; - /* Get the DLC */ - RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR; - /* Get the FMI */ - RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8); - /* Get the data field */ - RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR; - RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8); - RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16); - RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24); - RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR; - RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8); - RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16); - RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24); - /* Release the FIFO */ - /* Release FIFO0 */ - if (FIFONumber == CAN_FIFO0) - { - CANx->RF0R |= CAN_RF0R_RFOM0; - } - /* Release FIFO1 */ - else /* FIFONumber == CAN_FIFO1 */ - { - CANx->RF1R |= CAN_RF1R_RFOM1; - } -} - -/** - * @brief Releases the specified FIFO. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1. - * @retval None. - */ -void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_FIFO(FIFONumber)); - /* Release FIFO0 */ - if (FIFONumber == CAN_FIFO0) - { - CANx->RF0R |= CAN_RF0R_RFOM0; - } - /* Release FIFO1 */ - else /* FIFONumber == CAN_FIFO1 */ - { - CANx->RF1R |= CAN_RF1R_RFOM1; - } -} - -/** - * @brief Returns the number of pending messages. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. - * @retval NbMessage : which is the number of pending message. - */ -uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber) -{ - uint8_t message_pending=0; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_FIFO(FIFONumber)); - if (FIFONumber == CAN_FIFO0) - { - message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03); - } - else if (FIFONumber == CAN_FIFO1) - { - message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03); - } - else - { - message_pending = 0; - } - return message_pending; -} - - -/** - * @brief Select the CAN Operation mode. - * @param CAN_OperatingMode : CAN Operating Mode. This parameter can be one - * of @ref CAN_OperatingMode_TypeDef enumeration. - * @retval status of the requested mode which can be - * - CAN_ModeStatus_Failed CAN failed entering the specific mode - * - CAN_ModeStatus_Success CAN Succeed entering the specific mode - - */ -uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode) -{ - uint8_t status = CAN_ModeStatus_Failed; - - /* Timeout for INAK or also for SLAK bits*/ - uint32_t timeout = INAK_TIMEOUT; - - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_OPERATING_MODE(CAN_OperatingMode)); - - if (CAN_OperatingMode == CAN_OperatingMode_Initialization) - { - /* Request initialisation */ - CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_SLEEP)) | CAN_MCR_INRQ); - - /* Wait the acknowledge */ - while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) && (timeout != 0)) - { - timeout--; - } - if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) - { - status = CAN_ModeStatus_Failed; - } - else - { - status = CAN_ModeStatus_Success; - } - } - else if (CAN_OperatingMode == CAN_OperatingMode_Normal) - { - /* Request leave initialisation and sleep mode and enter Normal mode */ - CANx->MCR &= (uint32_t)(~(CAN_MCR_SLEEP|CAN_MCR_INRQ)); - - /* Wait the acknowledge */ - while (((CANx->MSR & CAN_MODE_MASK) != 0) && (timeout!=0)) - { - timeout--; - } - if ((CANx->MSR & CAN_MODE_MASK) != 0) - { - status = CAN_ModeStatus_Failed; - } - else - { - status = CAN_ModeStatus_Success; - } - } - else if (CAN_OperatingMode == CAN_OperatingMode_Sleep) - { - /* Request Sleep mode */ - CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); - - /* Wait the acknowledge */ - while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) && (timeout!=0)) - { - timeout--; - } - if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) - { - status = CAN_ModeStatus_Failed; - } - else - { - status = CAN_ModeStatus_Success; - } - } - else - { - status = CAN_ModeStatus_Failed; - } - - return (uint8_t) status; -} - -/** - * @brief Enters the low power mode. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @retval status: CAN_Sleep_Ok if sleep entered, CAN_Sleep_Failed in an - * other case. - */ -uint8_t CAN_Sleep(CAN_TypeDef* CANx) -{ - uint8_t sleepstatus = CAN_Sleep_Failed; - - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - /* Request Sleep mode */ - CANx->MCR = (((CANx->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); - - /* Sleep mode status */ - if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK) - { - /* Sleep mode not entered */ - sleepstatus = CAN_Sleep_Ok; - } - /* return sleep mode status */ - return (uint8_t)sleepstatus; -} - -/** - * @brief Wakes the CAN up. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @retval status: CAN_WakeUp_Ok if sleep mode left, CAN_WakeUp_Failed in an - * other case. - */ -uint8_t CAN_WakeUp(CAN_TypeDef* CANx) -{ - uint32_t wait_slak = SLAK_TIMEOUT; - uint8_t wakeupstatus = CAN_WakeUp_Failed; - - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - /* Wake up request */ - CANx->MCR &= ~(uint32_t)CAN_MCR_SLEEP; - - /* Sleep mode status */ - while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00)) - { - wait_slak--; - } - if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK) - { - /* wake up done : Sleep mode exited */ - wakeupstatus = CAN_WakeUp_Ok; - } - /* return wakeup status */ - return (uint8_t)wakeupstatus; -} - - -/** - * @brief Returns the CANx's last error code (LEC). - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @retval CAN_ErrorCode: specifies the Error code : - * - CAN_ERRORCODE_NoErr No Error - * - CAN_ERRORCODE_StuffErr Stuff Error - * - CAN_ERRORCODE_FormErr Form Error - * - CAN_ERRORCODE_ACKErr Acknowledgment Error - * - CAN_ERRORCODE_BitRecessiveErr Bit Recessive Error - * - CAN_ERRORCODE_BitDominantErr Bit Dominant Error - * - CAN_ERRORCODE_CRCErr CRC Error - * - CAN_ERRORCODE_SoftwareSetErr Software Set Error - */ - -uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx) -{ - uint8_t errorcode=0; - - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - /* Get the error code*/ - errorcode = (((uint8_t)CANx->ESR) & (uint8_t)CAN_ESR_LEC); - - /* Return the error code*/ - return errorcode; -} -/** - * @brief Returns the CANx Receive Error Counter (REC). - * @note In case of an error during reception, this counter is incremented - * by 1 or by 8 depending on the error condition as defined by the CAN - * standard. After every successful reception, the counter is - * decremented by 1 or reset to 120 if its value was higher than 128. - * When the counter value exceeds 127, the CAN controller enters the - * error passive state. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @retval CAN Receive Error Counter. - */ -uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx) -{ - uint8_t counter=0; - - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - /* Get the Receive Error Counter*/ - counter = (uint8_t)((CANx->ESR & CAN_ESR_REC)>> 24); - - /* Return the Receive Error Counter*/ - return counter; -} - - -/** - * @brief Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC). - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @retval LSB of the 9-bit CAN Transmit Error Counter. - */ -uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx) -{ - uint8_t counter=0; - - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - /* Get the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ - counter = (uint8_t)((CANx->ESR & CAN_ESR_TEC)>> 16); - - /* Return the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ - return counter; -} - - -/** - * @brief Enables or disables the specified CANx interrupts. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_IT: specifies the CAN interrupt sources to be enabled or disabled. - * This parameter can be: - * - CAN_IT_TME, - * - CAN_IT_FMP0, - * - CAN_IT_FF0, - * - CAN_IT_FOV0, - * - CAN_IT_FMP1, - * - CAN_IT_FF1, - * - CAN_IT_FOV1, - * - CAN_IT_EWG, - * - CAN_IT_EPV, - * - CAN_IT_LEC, - * - CAN_IT_ERR, - * - CAN_IT_WKU or - * - CAN_IT_SLK. - * @param NewState: new state of the CAN interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_IT(CAN_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected CANx interrupt */ - CANx->IER |= CAN_IT; - } - else - { - /* Disable the selected CANx interrupt */ - CANx->IER &= ~CAN_IT; - } -} -/** - * @brief Checks whether the specified CAN flag is set or not. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_FLAG: specifies the flag to check. - * This parameter can be one of the following flags: - * - CAN_FLAG_EWG - * - CAN_FLAG_EPV - * - CAN_FLAG_BOF - * - CAN_FLAG_RQCP0 - * - CAN_FLAG_RQCP1 - * - CAN_FLAG_RQCP2 - * - CAN_FLAG_FMP1 - * - CAN_FLAG_FF1 - * - CAN_FLAG_FOV1 - * - CAN_FLAG_FMP0 - * - CAN_FLAG_FF0 - * - CAN_FLAG_FOV0 - * - CAN_FLAG_WKU - * - CAN_FLAG_SLAK - * - CAN_FLAG_LEC - * @retval The new state of CAN_FLAG (SET or RESET). - */ -FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_GET_FLAG(CAN_FLAG)); - - - if((CAN_FLAG & CAN_FLAGS_ESR) != (uint32_t)RESET) - { - /* Check the status of the specified CAN flag */ - if ((CANx->ESR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) - { - /* CAN_FLAG is set */ - bitstatus = SET; - } - else - { - /* CAN_FLAG is reset */ - bitstatus = RESET; - } - } - else if((CAN_FLAG & CAN_FLAGS_MSR) != (uint32_t)RESET) - { - /* Check the status of the specified CAN flag */ - if ((CANx->MSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) - { - /* CAN_FLAG is set */ - bitstatus = SET; - } - else - { - /* CAN_FLAG is reset */ - bitstatus = RESET; - } - } - else if((CAN_FLAG & CAN_FLAGS_TSR) != (uint32_t)RESET) - { - /* Check the status of the specified CAN flag */ - if ((CANx->TSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) - { - /* CAN_FLAG is set */ - bitstatus = SET; - } - else - { - /* CAN_FLAG is reset */ - bitstatus = RESET; - } - } - else if((CAN_FLAG & CAN_FLAGS_RF0R) != (uint32_t)RESET) - { - /* Check the status of the specified CAN flag */ - if ((CANx->RF0R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) - { - /* CAN_FLAG is set */ - bitstatus = SET; - } - else - { - /* CAN_FLAG is reset */ - bitstatus = RESET; - } - } - else /* If(CAN_FLAG & CAN_FLAGS_RF1R != (uint32_t)RESET) */ - { - /* Check the status of the specified CAN flag */ - if ((uint32_t)(CANx->RF1R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) - { - /* CAN_FLAG is set */ - bitstatus = SET; - } - else - { - /* CAN_FLAG is reset */ - bitstatus = RESET; - } - } - /* Return the CAN_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the CAN's pending flags. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_FLAG: specifies the flag to clear. - * This parameter can be one of the following flags: - * - CAN_FLAG_RQCP0 - * - CAN_FLAG_RQCP1 - * - CAN_FLAG_RQCP2 - * - CAN_FLAG_FF1 - * - CAN_FLAG_FOV1 - * - CAN_FLAG_FF0 - * - CAN_FLAG_FOV0 - * - CAN_FLAG_WKU - * - CAN_FLAG_SLAK - * - CAN_FLAG_LEC - * @retval None. - */ -void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG) -{ - uint32_t flagtmp=0; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_CLEAR_FLAG(CAN_FLAG)); - - if (CAN_FLAG == CAN_FLAG_LEC) /* ESR register */ - { - /* Clear the selected CAN flags */ - CANx->ESR = (uint32_t)RESET; - } - else /* MSR or TSR or RF0R or RF1R */ - { - flagtmp = CAN_FLAG & 0x000FFFFF; - - if ((CAN_FLAG & CAN_FLAGS_RF0R)!=(uint32_t)RESET) - { - /* Receive Flags */ - CANx->RF0R = (uint32_t)(flagtmp); - } - else if ((CAN_FLAG & CAN_FLAGS_RF1R)!=(uint32_t)RESET) - { - /* Receive Flags */ - CANx->RF1R = (uint32_t)(flagtmp); - } - else if ((CAN_FLAG & CAN_FLAGS_TSR)!=(uint32_t)RESET) - { - /* Transmit Flags */ - CANx->TSR = (uint32_t)(flagtmp); - } - else /* If((CAN_FLAG & CAN_FLAGS_MSR)!=(uint32_t)RESET) */ - { - /* Operating mode Flags */ - CANx->MSR = (uint32_t)(flagtmp); - } - } -} - -/** - * @brief Checks whether the specified CANx interrupt has occurred or not. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_IT: specifies the CAN interrupt source to check. - * This parameter can be one of the following flags: - * - CAN_IT_TME - * - CAN_IT_FMP0 - * - CAN_IT_FF0 - * - CAN_IT_FOV0 - * - CAN_IT_FMP1 - * - CAN_IT_FF1 - * - CAN_IT_FOV1 - * - CAN_IT_WKU - * - CAN_IT_SLK - * - CAN_IT_EWG - * - CAN_IT_EPV - * - CAN_IT_BOF - * - CAN_IT_LEC - * - CAN_IT_ERR - * @retval The current state of CAN_IT (SET or RESET). - */ -ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT) -{ - ITStatus itstatus = RESET; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_IT(CAN_IT)); - - /* check the enable interrupt bit */ - if((CANx->IER & CAN_IT) != RESET) - { - /* in case the Interrupt is enabled, .... */ - switch (CAN_IT) - { - case CAN_IT_TME: - /* Check CAN_TSR_RQCPx bits */ - itstatus = CheckITStatus(CANx->TSR, CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2); - break; - case CAN_IT_FMP0: - /* Check CAN_RF0R_FMP0 bit */ - itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FMP0); - break; - case CAN_IT_FF0: - /* Check CAN_RF0R_FULL0 bit */ - itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FULL0); - break; - case CAN_IT_FOV0: - /* Check CAN_RF0R_FOVR0 bit */ - itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FOVR0); - break; - case CAN_IT_FMP1: - /* Check CAN_RF1R_FMP1 bit */ - itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FMP1); - break; - case CAN_IT_FF1: - /* Check CAN_RF1R_FULL1 bit */ - itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FULL1); - break; - case CAN_IT_FOV1: - /* Check CAN_RF1R_FOVR1 bit */ - itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FOVR1); - break; - case CAN_IT_WKU: - /* Check CAN_MSR_WKUI bit */ - itstatus = CheckITStatus(CANx->MSR, CAN_MSR_WKUI); - break; - case CAN_IT_SLK: - /* Check CAN_MSR_SLAKI bit */ - itstatus = CheckITStatus(CANx->MSR, CAN_MSR_SLAKI); - break; - case CAN_IT_EWG: - /* Check CAN_ESR_EWGF bit */ - itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EWGF); - break; - case CAN_IT_EPV: - /* Check CAN_ESR_EPVF bit */ - itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EPVF); - break; - case CAN_IT_BOF: - /* Check CAN_ESR_BOFF bit */ - itstatus = CheckITStatus(CANx->ESR, CAN_ESR_BOFF); - break; - case CAN_IT_LEC: - /* Check CAN_ESR_LEC bit */ - itstatus = CheckITStatus(CANx->ESR, CAN_ESR_LEC); - break; - case CAN_IT_ERR: - /* Check CAN_MSR_ERRI bit */ - itstatus = CheckITStatus(CANx->MSR, CAN_MSR_ERRI); - break; - default : - /* in case of error, return RESET */ - itstatus = RESET; - break; - } - } - else - { - /* in case the Interrupt is not enabled, return RESET */ - itstatus = RESET; - } - - /* Return the CAN_IT status */ - return itstatus; -} - -/** - * @brief Clears the CANx's interrupt pending bits. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_IT: specifies the interrupt pending bit to clear. - * - CAN_IT_TME - * - CAN_IT_FF0 - * - CAN_IT_FOV0 - * - CAN_IT_FF1 - * - CAN_IT_FOV1 - * - CAN_IT_WKU - * - CAN_IT_SLK - * - CAN_IT_EWG - * - CAN_IT_EPV - * - CAN_IT_BOF - * - CAN_IT_LEC - * - CAN_IT_ERR - * @retval None. - */ -void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_CLEAR_IT(CAN_IT)); - - switch (CAN_IT) - { - case CAN_IT_TME: - /* Clear CAN_TSR_RQCPx (rc_w1)*/ - CANx->TSR = CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2; - break; - case CAN_IT_FF0: - /* Clear CAN_RF0R_FULL0 (rc_w1)*/ - CANx->RF0R = CAN_RF0R_FULL0; - break; - case CAN_IT_FOV0: - /* Clear CAN_RF0R_FOVR0 (rc_w1)*/ - CANx->RF0R = CAN_RF0R_FOVR0; - break; - case CAN_IT_FF1: - /* Clear CAN_RF1R_FULL1 (rc_w1)*/ - CANx->RF1R = CAN_RF1R_FULL1; - break; - case CAN_IT_FOV1: - /* Clear CAN_RF1R_FOVR1 (rc_w1)*/ - CANx->RF1R = CAN_RF1R_FOVR1; - break; - case CAN_IT_WKU: - /* Clear CAN_MSR_WKUI (rc_w1)*/ - CANx->MSR = CAN_MSR_WKUI; - break; - case CAN_IT_SLK: - /* Clear CAN_MSR_SLAKI (rc_w1)*/ - CANx->MSR = CAN_MSR_SLAKI; - break; - case CAN_IT_EWG: - /* Clear CAN_MSR_ERRI (rc_w1) */ - CANx->MSR = CAN_MSR_ERRI; - /* Note : the corresponding Flag is cleared by hardware depending - of the CAN Bus status*/ - break; - case CAN_IT_EPV: - /* Clear CAN_MSR_ERRI (rc_w1) */ - CANx->MSR = CAN_MSR_ERRI; - /* Note : the corresponding Flag is cleared by hardware depending - of the CAN Bus status*/ - break; - case CAN_IT_BOF: - /* Clear CAN_MSR_ERRI (rc_w1) */ - CANx->MSR = CAN_MSR_ERRI; - /* Note : the corresponding Flag is cleared by hardware depending - of the CAN Bus status*/ - break; - case CAN_IT_LEC: - /* Clear LEC bits */ - CANx->ESR = RESET; - /* Clear CAN_MSR_ERRI (rc_w1) */ - CANx->MSR = CAN_MSR_ERRI; - break; - case CAN_IT_ERR: - /*Clear LEC bits */ - CANx->ESR = RESET; - /* Clear CAN_MSR_ERRI (rc_w1) */ - CANx->MSR = CAN_MSR_ERRI; - /* Note : BOFF, EPVF and EWGF Flags are cleared by hardware depending - of the CAN Bus status*/ - break; - default : - break; - } -} - -/** - * @brief Checks whether the CAN interrupt has occurred or not. - * @param CAN_Reg: specifies the CAN interrupt register to check. - * @param It_Bit: specifies the interrupt source bit to check. - * @retval The new state of the CAN Interrupt (SET or RESET). - */ -static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit) -{ - ITStatus pendingbitstatus = RESET; - - if ((CAN_Reg & It_Bit) != (uint32_t)RESET) - { - /* CAN_IT is set */ - pendingbitstatus = SET; - } - else - { - /* CAN_IT is reset */ - pendingbitstatus = RESET; - } - return pendingbitstatus; -} - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c deleted file mode 100644 index 4dc615f..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c +++ /dev/null @@ -1,433 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_cec.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the CEC firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_cec.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup CEC - * @brief CEC driver modules - * @{ - */ - -/** @defgroup CEC_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - - -/** @defgroup CEC_Private_Defines - * @{ - */ - -/* ------------ CEC registers bit address in the alias region ----------- */ -#define CEC_OFFSET (CEC_BASE - PERIPH_BASE) - -/* --- CFGR Register ---*/ - -/* Alias word address of PE bit */ -#define CFGR_OFFSET (CEC_OFFSET + 0x00) -#define PE_BitNumber 0x00 -#define CFGR_PE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (PE_BitNumber * 4)) - -/* Alias word address of IE bit */ -#define IE_BitNumber 0x01 -#define CFGR_IE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (IE_BitNumber * 4)) - -/* --- CSR Register ---*/ - -/* Alias word address of TSOM bit */ -#define CSR_OFFSET (CEC_OFFSET + 0x10) -#define TSOM_BitNumber 0x00 -#define CSR_TSOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TSOM_BitNumber * 4)) - -/* Alias word address of TEOM bit */ -#define TEOM_BitNumber 0x01 -#define CSR_TEOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEOM_BitNumber * 4)) - -#define CFGR_CLEAR_Mask (uint8_t)(0xF3) /* CFGR register Mask */ -#define FLAG_Mask ((uint32_t)0x00FFFFFF) /* CEC FLAG mask */ - -/** - * @} - */ - - -/** @defgroup CEC_Private_Macros - * @{ - */ - -/** - * @} - */ - - -/** @defgroup CEC_Private_Variables - * @{ - */ - -/** - * @} - */ - - -/** @defgroup CEC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - - -/** @defgroup CEC_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the CEC peripheral registers to their default reset - * values. - * @param None - * @retval None - */ -void CEC_DeInit(void) -{ - /* Enable CEC reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, ENABLE); - /* Release CEC from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, DISABLE); -} - - -/** - * @brief Initializes the CEC peripheral according to the specified - * parameters in the CEC_InitStruct. - * @param CEC_InitStruct: pointer to an CEC_InitTypeDef structure that - * contains the configuration information for the specified - * CEC peripheral. - * @retval None - */ -void CEC_Init(CEC_InitTypeDef* CEC_InitStruct) -{ - uint16_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_CEC_BIT_TIMING_ERROR_MODE(CEC_InitStruct->CEC_BitTimingMode)); - assert_param(IS_CEC_BIT_PERIOD_ERROR_MODE(CEC_InitStruct->CEC_BitPeriodMode)); - - /*---------------------------- CEC CFGR Configuration -----------------*/ - /* Get the CEC CFGR value */ - tmpreg = CEC->CFGR; - - /* Clear BTEM and BPEM bits */ - tmpreg &= CFGR_CLEAR_Mask; - - /* Configure CEC: Bit Timing Error and Bit Period Error */ - tmpreg |= (uint16_t)(CEC_InitStruct->CEC_BitTimingMode | CEC_InitStruct->CEC_BitPeriodMode); - - /* Write to CEC CFGR register*/ - CEC->CFGR = tmpreg; - -} - -/** - * @brief Enables or disables the specified CEC peripheral. - * @param NewState: new state of the CEC peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void CEC_Cmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CFGR_PE_BB = (uint32_t)NewState; - - if(NewState == DISABLE) - { - /* Wait until the PE bit is cleared by hardware (Idle Line detected) */ - while((CEC->CFGR & CEC_CFGR_PE) != (uint32_t)RESET) - { - } - } -} - -/** - * @brief Enables or disables the CEC interrupt. - * @param NewState: new state of the CEC interrupt. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void CEC_ITConfig(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CFGR_IE_BB = (uint32_t)NewState; -} - -/** - * @brief Defines the Own Address of the CEC device. - * @param CEC_OwnAddress: The CEC own address - * @retval None - */ -void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress) -{ - /* Check the parameters */ - assert_param(IS_CEC_ADDRESS(CEC_OwnAddress)); - - /* Set the CEC own address */ - CEC->OAR = CEC_OwnAddress; -} - -/** - * @brief Sets the CEC prescaler value. - * @param CEC_Prescaler: CEC prescaler new value - * @retval None - */ -void CEC_SetPrescaler(uint16_t CEC_Prescaler) -{ - /* Check the parameters */ - assert_param(IS_CEC_PRESCALER(CEC_Prescaler)); - - /* Set the Prescaler value*/ - CEC->PRES = CEC_Prescaler; -} - -/** - * @brief Transmits single data through the CEC peripheral. - * @param Data: the data to transmit. - * @retval None - */ -void CEC_SendDataByte(uint8_t Data) -{ - /* Transmit Data */ - CEC->TXD = Data ; -} - - -/** - * @brief Returns the most recent received data by the CEC peripheral. - * @param None - * @retval The received data. - */ -uint8_t CEC_ReceiveDataByte(void) -{ - /* Receive Data */ - return (uint8_t)(CEC->RXD); -} - -/** - * @brief Starts a new message. - * @param None - * @retval None - */ -void CEC_StartOfMessage(void) -{ - /* Starts of new message */ - *(__IO uint32_t *) CSR_TSOM_BB = (uint32_t)0x1; -} - -/** - * @brief Transmits message with or without an EOM bit. - * @param NewState: new state of the CEC Tx End Of Message. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void CEC_EndOfMessageCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - /* The data byte will be transmitted with or without an EOM bit*/ - *(__IO uint32_t *) CSR_TEOM_BB = (uint32_t)NewState; -} - -/** - * @brief Gets the CEC flag status - * @param CEC_FLAG: specifies the CEC flag to check. - * This parameter can be one of the following values: - * @arg CEC_FLAG_BTE: Bit Timing Error - * @arg CEC_FLAG_BPE: Bit Period Error - * @arg CEC_FLAG_RBTFE: Rx Block Transfer Finished Error - * @arg CEC_FLAG_SBE: Start Bit Error - * @arg CEC_FLAG_ACKE: Block Acknowledge Error - * @arg CEC_FLAG_LINE: Line Error - * @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error - * @arg CEC_FLAG_TEOM: Tx End Of Message - * @arg CEC_FLAG_TERR: Tx Error - * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished - * @arg CEC_FLAG_RSOM: Rx Start Of Message - * @arg CEC_FLAG_REOM: Rx End Of Message - * @arg CEC_FLAG_RERR: Rx Error - * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished - * @retval The new state of CEC_FLAG (SET or RESET) - */ -FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG) -{ - FlagStatus bitstatus = RESET; - uint32_t cecreg = 0, cecbase = 0; - - /* Check the parameters */ - assert_param(IS_CEC_GET_FLAG(CEC_FLAG)); - - /* Get the CEC peripheral base address */ - cecbase = (uint32_t)(CEC_BASE); - - /* Read flag register index */ - cecreg = CEC_FLAG >> 28; - - /* Get bit[23:0] of the flag */ - CEC_FLAG &= FLAG_Mask; - - if(cecreg != 0) - { - /* Flag in CEC ESR Register */ - CEC_FLAG = (uint32_t)(CEC_FLAG >> 16); - - /* Get the CEC ESR register address */ - cecbase += 0xC; - } - else - { - /* Get the CEC CSR register address */ - cecbase += 0x10; - } - - if(((*(__IO uint32_t *)cecbase) & CEC_FLAG) != (uint32_t)RESET) - { - /* CEC_FLAG is set */ - bitstatus = SET; - } - else - { - /* CEC_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the CEC_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the CEC's pending flags. - * @param CEC_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg CEC_FLAG_TERR: Tx Error - * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished - * @arg CEC_FLAG_RSOM: Rx Start Of Message - * @arg CEC_FLAG_REOM: Rx End Of Message - * @arg CEC_FLAG_RERR: Rx Error - * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished - * @retval None - */ -void CEC_ClearFlag(uint32_t CEC_FLAG) -{ - uint32_t tmp = 0x0; - - /* Check the parameters */ - assert_param(IS_CEC_CLEAR_FLAG(CEC_FLAG)); - - tmp = CEC->CSR & 0x2; - - /* Clear the selected CEC flags */ - CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_FLAG) & 0xFFFFFFFC) | tmp); -} - -/** - * @brief Checks whether the specified CEC interrupt has occurred or not. - * @param CEC_IT: specifies the CEC interrupt source to check. - * This parameter can be one of the following values: - * @arg CEC_IT_TERR: Tx Error - * @arg CEC_IT_TBTF: Tx Block Transfer Finished - * @arg CEC_IT_RERR: Rx Error - * @arg CEC_IT_RBTF: Rx Block Transfer Finished - * @retval The new state of CEC_IT (SET or RESET). - */ -ITStatus CEC_GetITStatus(uint8_t CEC_IT) -{ - ITStatus bitstatus = RESET; - uint32_t enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_CEC_GET_IT(CEC_IT)); - - /* Get the CEC IT enable bit status */ - enablestatus = (CEC->CFGR & (uint8_t)CEC_CFGR_IE) ; - - /* Check the status of the specified CEC interrupt */ - if (((CEC->CSR & CEC_IT) != (uint32_t)RESET) && enablestatus) - { - /* CEC_IT is set */ - bitstatus = SET; - } - else - { - /* CEC_IT is reset */ - bitstatus = RESET; - } - /* Return the CEC_IT status */ - return bitstatus; -} - -/** - * @brief Clears the CEC's interrupt pending bits. - * @param CEC_IT: specifies the CEC interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg CEC_IT_TERR: Tx Error - * @arg CEC_IT_TBTF: Tx Block Transfer Finished - * @arg CEC_IT_RERR: Rx Error - * @arg CEC_IT_RBTF: Rx Block Transfer Finished - * @retval None - */ -void CEC_ClearITPendingBit(uint16_t CEC_IT) -{ - uint32_t tmp = 0x0; - - /* Check the parameters */ - assert_param(IS_CEC_GET_IT(CEC_IT)); - - tmp = CEC->CSR & 0x2; - - /* Clear the selected CEC interrupt pending bits */ - CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_IT) & 0xFFFFFFFC) | tmp); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c deleted file mode 100644 index 96a8fde..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c +++ /dev/null @@ -1,162 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_dbgmcu.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the DBGMCU firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dbgmcu.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup DBGMCU - * @brief DBGMCU driver modules - * @{ - */ - -/** @defgroup DBGMCU_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Private_Defines - * @{ - */ - -#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) -/** - * @} - */ - -/** @defgroup DBGMCU_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Private_Functions - * @{ - */ - -/** - * @brief Returns the device revision identifier. - * @param None - * @retval Device revision identifier - */ -uint32_t DBGMCU_GetREVID(void) -{ - return(DBGMCU->IDCODE >> 16); -} - -/** - * @brief Returns the device identifier. - * @param None - * @retval Device identifier - */ -uint32_t DBGMCU_GetDEVID(void) -{ - return(DBGMCU->IDCODE & IDCODE_DEVID_MASK); -} - -/** - * @brief Configures the specified peripheral and low power mode behavior - * when the MCU under Debug mode. - * @param DBGMCU_Periph: specifies the peripheral and low power mode. - * This parameter can be any combination of the following values: - * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode - * @arg DBGMCU_STOP: Keep debugger connection during STOP mode - * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode - * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted - * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted - * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted - * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted - * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted - * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted - * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted - * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted - * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted - * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted - * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted - * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted - * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted - * @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted - * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted - * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted - * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted - * @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted - * @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted - * @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted - * @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted - * @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted - * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted - * @param NewState: new state of the specified peripheral in Debug mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - DBGMCU->CR |= DBGMCU_Periph; - } - else - { - DBGMCU->CR &= ~DBGMCU_Periph; - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c deleted file mode 100644 index bf072df..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c +++ /dev/null @@ -1,714 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_dma.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the DMA firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dma.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup DMA - * @brief DMA driver modules - * @{ - */ - -/** @defgroup DMA_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - -/** @defgroup DMA_Private_Defines - * @{ - */ - - -/* DMA1 Channelx interrupt pending bit masks */ -#define DMA1_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1)) -#define DMA1_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2)) -#define DMA1_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3)) -#define DMA1_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4)) -#define DMA1_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5)) -#define DMA1_Channel6_IT_Mask ((uint32_t)(DMA_ISR_GIF6 | DMA_ISR_TCIF6 | DMA_ISR_HTIF6 | DMA_ISR_TEIF6)) -#define DMA1_Channel7_IT_Mask ((uint32_t)(DMA_ISR_GIF7 | DMA_ISR_TCIF7 | DMA_ISR_HTIF7 | DMA_ISR_TEIF7)) - -/* DMA2 Channelx interrupt pending bit masks */ -#define DMA2_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1)) -#define DMA2_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2)) -#define DMA2_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3)) -#define DMA2_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4)) -#define DMA2_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5)) - -/* DMA2 FLAG mask */ -#define FLAG_Mask ((uint32_t)0x10000000) - -/* DMA registers Masks */ -#define CCR_CLEAR_Mask ((uint32_t)0xFFFF800F) - -/** - * @} - */ - -/** @defgroup DMA_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup DMA_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup DMA_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup DMA_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the DMAy Channelx registers to their default reset - * values. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @retval None - */ -void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - - /* Disable the selected DMAy Channelx */ - DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN); - - /* Reset DMAy Channelx control register */ - DMAy_Channelx->CCR = 0; - - /* Reset DMAy Channelx remaining bytes register */ - DMAy_Channelx->CNDTR = 0; - - /* Reset DMAy Channelx peripheral address register */ - DMAy_Channelx->CPAR = 0; - - /* Reset DMAy Channelx memory address register */ - DMAy_Channelx->CMAR = 0; - - if (DMAy_Channelx == DMA1_Channel1) - { - /* Reset interrupt pending bits for DMA1 Channel1 */ - DMA1->IFCR |= DMA1_Channel1_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel2) - { - /* Reset interrupt pending bits for DMA1 Channel2 */ - DMA1->IFCR |= DMA1_Channel2_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel3) - { - /* Reset interrupt pending bits for DMA1 Channel3 */ - DMA1->IFCR |= DMA1_Channel3_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel4) - { - /* Reset interrupt pending bits for DMA1 Channel4 */ - DMA1->IFCR |= DMA1_Channel4_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel5) - { - /* Reset interrupt pending bits for DMA1 Channel5 */ - DMA1->IFCR |= DMA1_Channel5_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel6) - { - /* Reset interrupt pending bits for DMA1 Channel6 */ - DMA1->IFCR |= DMA1_Channel6_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel7) - { - /* Reset interrupt pending bits for DMA1 Channel7 */ - DMA1->IFCR |= DMA1_Channel7_IT_Mask; - } - else if (DMAy_Channelx == DMA2_Channel1) - { - /* Reset interrupt pending bits for DMA2 Channel1 */ - DMA2->IFCR |= DMA2_Channel1_IT_Mask; - } - else if (DMAy_Channelx == DMA2_Channel2) - { - /* Reset interrupt pending bits for DMA2 Channel2 */ - DMA2->IFCR |= DMA2_Channel2_IT_Mask; - } - else if (DMAy_Channelx == DMA2_Channel3) - { - /* Reset interrupt pending bits for DMA2 Channel3 */ - DMA2->IFCR |= DMA2_Channel3_IT_Mask; - } - else if (DMAy_Channelx == DMA2_Channel4) - { - /* Reset interrupt pending bits for DMA2 Channel4 */ - DMA2->IFCR |= DMA2_Channel4_IT_Mask; - } - else - { - if (DMAy_Channelx == DMA2_Channel5) - { - /* Reset interrupt pending bits for DMA2 Channel5 */ - DMA2->IFCR |= DMA2_Channel5_IT_Mask; - } - } -} - -/** - * @brief Initializes the DMAy Channelx according to the specified - * parameters in the DMA_InitStruct. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that - * contains the configuration information for the specified DMA Channel. - * @retval None - */ -void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR)); - assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize)); - assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode)); - assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority)); - assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M)); - -/*--------------------------- DMAy Channelx CCR Configuration -----------------*/ - /* Get the DMAy_Channelx CCR value */ - tmpreg = DMAy_Channelx->CCR; - /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ - tmpreg &= CCR_CLEAR_Mask; - /* Configure DMAy Channelx: data transfer, data size, priority level and mode */ - /* Set DIR bit according to DMA_DIR value */ - /* Set CIRC bit according to DMA_Mode value */ - /* Set PINC bit according to DMA_PeripheralInc value */ - /* Set MINC bit according to DMA_MemoryInc value */ - /* Set PSIZE bits according to DMA_PeripheralDataSize value */ - /* Set MSIZE bits according to DMA_MemoryDataSize value */ - /* Set PL bits according to DMA_Priority value */ - /* Set the MEM2MEM bit according to DMA_M2M value */ - tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode | - DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | - DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | - DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M; - - /* Write to DMAy Channelx CCR */ - DMAy_Channelx->CCR = tmpreg; - -/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ - /* Write to DMAy Channelx CNDTR */ - DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize; - -/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/ - /* Write to DMAy Channelx CPAR */ - DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr; - -/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/ - /* Write to DMAy Channelx CMAR */ - DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr; -} - -/** - * @brief Fills each DMA_InitStruct member with its default value. - * @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct) -{ -/*-------------- Reset DMA init structure parameters values ------------------*/ - /* Initialize the DMA_PeripheralBaseAddr member */ - DMA_InitStruct->DMA_PeripheralBaseAddr = 0; - /* Initialize the DMA_MemoryBaseAddr member */ - DMA_InitStruct->DMA_MemoryBaseAddr = 0; - /* Initialize the DMA_DIR member */ - DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC; - /* Initialize the DMA_BufferSize member */ - DMA_InitStruct->DMA_BufferSize = 0; - /* Initialize the DMA_PeripheralInc member */ - DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; - /* Initialize the DMA_MemoryInc member */ - DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; - /* Initialize the DMA_PeripheralDataSize member */ - DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; - /* Initialize the DMA_MemoryDataSize member */ - DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; - /* Initialize the DMA_Mode member */ - DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; - /* Initialize the DMA_Priority member */ - DMA_InitStruct->DMA_Priority = DMA_Priority_Low; - /* Initialize the DMA_M2M member */ - DMA_InitStruct->DMA_M2M = DMA_M2M_Disable; -} - -/** - * @brief Enables or disables the specified DMAy Channelx. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @param NewState: new state of the DMAy Channelx. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DMAy Channelx */ - DMAy_Channelx->CCR |= DMA_CCR1_EN; - } - else - { - /* Disable the selected DMAy Channelx */ - DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN); - } -} - -/** - * @brief Enables or disables the specified DMAy Channelx interrupts. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @param DMA_IT: specifies the DMA interrupts sources to be enabled - * or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @param NewState: new state of the specified DMA interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_DMA_CONFIG_IT(DMA_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected DMA interrupts */ - DMAy_Channelx->CCR |= DMA_IT; - } - else - { - /* Disable the selected DMA interrupts */ - DMAy_Channelx->CCR &= ~DMA_IT; - } -} - -/** - * @brief Sets the number of data units in the current DMAy Channelx transfer. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @param DataNumber: The number of data units in the current DMAy Channelx - * transfer. - * @note This function can only be used when the DMAy_Channelx is disabled. - * @retval None. - */ -void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - -/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ - /* Write to DMAy Channelx CNDTR */ - DMAy_Channelx->CNDTR = DataNumber; -} - -/** - * @brief Returns the number of remaining data units in the current - * DMAy Channelx transfer. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @retval The number of remaining data units in the current DMAy Channelx - * transfer. - */ -uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - /* Return the number of remaining data units for DMAy Channelx */ - return ((uint16_t)(DMAy_Channelx->CNDTR)); -} - -/** - * @brief Checks whether the specified DMAy Channelx flag is set or not. - * @param DMAy_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. - * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. - * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. - * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. - * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. - * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. - * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. - * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. - * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. - * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. - * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. - * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. - * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. - * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. - * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. - * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. - * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. - * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. - * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. - * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. - * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag. - * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. - * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. - * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. - * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag. - * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. - * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. - * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. - * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag. - * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. - * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. - * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. - * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag. - * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. - * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. - * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. - * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag. - * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. - * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. - * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. - * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag. - * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. - * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. - * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. - * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag. - * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. - * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. - * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. - * @retval The new state of DMAy_FLAG (SET or RESET). - */ -FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG) -{ - FlagStatus bitstatus = RESET; - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_GET_FLAG(DMAy_FLAG)); - - /* Calculate the used DMAy */ - if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET) - { - /* Get DMA2 ISR register value */ - tmpreg = DMA2->ISR ; - } - else - { - /* Get DMA1 ISR register value */ - tmpreg = DMA1->ISR ; - } - - /* Check the status of the specified DMAy flag */ - if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET) - { - /* DMAy_FLAG is set */ - bitstatus = SET; - } - else - { - /* DMAy_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the DMAy_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the DMAy Channelx's pending flags. - * @param DMAy_FLAG: specifies the flag to clear. - * This parameter can be any combination (for the same DMA) of the following values: - * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. - * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. - * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. - * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. - * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. - * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. - * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. - * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. - * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. - * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. - * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. - * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. - * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. - * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. - * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. - * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. - * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. - * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. - * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. - * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. - * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag. - * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. - * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. - * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. - * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag. - * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. - * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. - * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. - * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag. - * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. - * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. - * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. - * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag. - * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. - * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. - * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. - * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag. - * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. - * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. - * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. - * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag. - * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. - * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. - * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. - * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag. - * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. - * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. - * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. - * @retval None - */ -void DMA_ClearFlag(uint32_t DMAy_FLAG) -{ - /* Check the parameters */ - assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG)); - - /* Calculate the used DMAy */ - if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET) - { - /* Clear the selected DMAy flags */ - DMA2->IFCR = DMAy_FLAG; - } - else - { - /* Clear the selected DMAy flags */ - DMA1->IFCR = DMAy_FLAG; - } -} - -/** - * @brief Checks whether the specified DMAy Channelx interrupt has occurred or not. - * @param DMAy_IT: specifies the DMAy interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. - * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. - * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. - * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. - * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. - * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. - * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. - * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. - * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. - * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. - * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. - * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. - * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. - * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. - * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. - * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. - * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. - * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. - * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. - * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. - * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt. - * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. - * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. - * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. - * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt. - * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. - * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. - * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. - * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt. - * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. - * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. - * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. - * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt. - * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. - * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. - * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. - * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt. - * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. - * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. - * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. - * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt. - * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. - * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. - * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. - * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt. - * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. - * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. - * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. - * @retval The new state of DMAy_IT (SET or RESET). - */ -ITStatus DMA_GetITStatus(uint32_t DMAy_IT) -{ - ITStatus bitstatus = RESET; - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_GET_IT(DMAy_IT)); - - /* Calculate the used DMA */ - if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET) - { - /* Get DMA2 ISR register value */ - tmpreg = DMA2->ISR; - } - else - { - /* Get DMA1 ISR register value */ - tmpreg = DMA1->ISR; - } - - /* Check the status of the specified DMAy interrupt */ - if ((tmpreg & DMAy_IT) != (uint32_t)RESET) - { - /* DMAy_IT is set */ - bitstatus = SET; - } - else - { - /* DMAy_IT is reset */ - bitstatus = RESET; - } - /* Return the DMA_IT status */ - return bitstatus; -} - -/** - * @brief Clears the DMAy Channelx's interrupt pending bits. - * @param DMAy_IT: specifies the DMAy interrupt pending bit to clear. - * This parameter can be any combination (for the same DMA) of the following values: - * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. - * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. - * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. - * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. - * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. - * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. - * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. - * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. - * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. - * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. - * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. - * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. - * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. - * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. - * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. - * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. - * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. - * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. - * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. - * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. - * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt. - * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. - * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. - * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. - * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt. - * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. - * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. - * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. - * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt. - * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. - * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. - * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. - * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt. - * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. - * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. - * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. - * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt. - * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. - * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. - * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. - * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt. - * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. - * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. - * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. - * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt. - * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. - * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. - * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. - * @retval None - */ -void DMA_ClearITPendingBit(uint32_t DMAy_IT) -{ - /* Check the parameters */ - assert_param(IS_DMA_CLEAR_IT(DMAy_IT)); - - /* Calculate the used DMAy */ - if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET) - { - /* Clear the selected DMAy interrupt pending bits */ - DMA2->IFCR = DMAy_IT; - } - else - { - /* Clear the selected DMAy interrupt pending bits */ - DMA1->IFCR = DMAy_IT; - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c deleted file mode 100644 index b6290d5..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c +++ /dev/null @@ -1,269 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_exti.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the EXTI firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_exti.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup EXTI - * @brief EXTI driver modules - * @{ - */ - -/** @defgroup EXTI_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup EXTI_Private_Defines - * @{ - */ - -#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */ - -/** - * @} - */ - -/** @defgroup EXTI_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup EXTI_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup EXTI_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup EXTI_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the EXTI peripheral registers to their default reset values. - * @param None - * @retval None - */ -void EXTI_DeInit(void) -{ - EXTI->IMR = 0x00000000; - EXTI->EMR = 0x00000000; - EXTI->RTSR = 0x00000000; - EXTI->FTSR = 0x00000000; - EXTI->PR = 0x000FFFFF; -} - -/** - * @brief Initializes the EXTI peripheral according to the specified - * parameters in the EXTI_InitStruct. - * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure - * that contains the configuration information for the EXTI peripheral. - * @retval None - */ -void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) -{ - uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); - assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); - assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); - assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); - - tmp = (uint32_t)EXTI_BASE; - - if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) - { - /* Clear EXTI line configuration */ - EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; - EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; - - tmp += EXTI_InitStruct->EXTI_Mode; - - *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; - - /* Clear Rising Falling edge configuration */ - EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; - EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; - - /* Select the trigger for the selected external interrupts */ - if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) - { - /* Rising Falling edge */ - EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; - EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; - } - else - { - tmp = (uint32_t)EXTI_BASE; - tmp += EXTI_InitStruct->EXTI_Trigger; - - *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; - } - } - else - { - tmp += EXTI_InitStruct->EXTI_Mode; - - /* Disable the selected external lines */ - *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line; - } -} - -/** - * @brief Fills each EXTI_InitStruct member with its reset value. - * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) -{ - EXTI_InitStruct->EXTI_Line = EXTI_LINENONE; - EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; - EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStruct->EXTI_LineCmd = DISABLE; -} - -/** - * @brief Generates a Software interrupt. - * @param EXTI_Line: specifies the EXTI lines to be enabled or disabled. - * This parameter can be any combination of EXTI_Linex where x can be (0..19). - * @retval None - */ -void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->SWIER |= EXTI_Line; -} - -/** - * @brief Checks whether the specified EXTI line flag is set or not. - * @param EXTI_Line: specifies the EXTI line flag to check. - * This parameter can be: - * @arg EXTI_Linex: External interrupt line x where x(0..19) - * @retval The new state of EXTI_Line (SET or RESET). - */ -FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_GET_EXTI_LINE(EXTI_Line)); - - if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the EXTI's line pending flags. - * @param EXTI_Line: specifies the EXTI lines flags to clear. - * This parameter can be any combination of EXTI_Linex where x can be (0..19). - * @retval None - */ -void EXTI_ClearFlag(uint32_t EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->PR = EXTI_Line; -} - -/** - * @brief Checks whether the specified EXTI line is asserted or not. - * @param EXTI_Line: specifies the EXTI line to check. - * This parameter can be: - * @arg EXTI_Linex: External interrupt line x where x(0..19) - * @retval The new state of EXTI_Line (SET or RESET). - */ -ITStatus EXTI_GetITStatus(uint32_t EXTI_Line) -{ - ITStatus bitstatus = RESET; - uint32_t enablestatus = 0; - /* Check the parameters */ - assert_param(IS_GET_EXTI_LINE(EXTI_Line)); - - enablestatus = EXTI->IMR & EXTI_Line; - if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the EXTI's line pending bits. - * @param EXTI_Line: specifies the EXTI lines to clear. - * This parameter can be any combination of EXTI_Linex where x can be (0..19). - * @retval None - */ -void EXTI_ClearITPendingBit(uint32_t EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->PR = EXTI_Line; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c deleted file mode 100644 index cdff9e9..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c +++ /dev/null @@ -1,1684 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_flash.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the FLASH firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_flash.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup FLASH - * @brief FLASH driver modules - * @{ - */ - -/** @defgroup FLASH_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup FLASH_Private_Defines - * @{ - */ - -/* Flash Access Control Register bits */ -#define ACR_LATENCY_Mask ((uint32_t)0x00000038) -#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7) -#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF) - -/* Flash Access Control Register bits */ -#define ACR_PRFTBS_Mask ((uint32_t)0x00000020) - -/* Flash Control Register bits */ -#define CR_PG_Set ((uint32_t)0x00000001) -#define CR_PG_Reset ((uint32_t)0x00001FFE) -#define CR_PER_Set ((uint32_t)0x00000002) -#define CR_PER_Reset ((uint32_t)0x00001FFD) -#define CR_MER_Set ((uint32_t)0x00000004) -#define CR_MER_Reset ((uint32_t)0x00001FFB) -#define CR_OPTPG_Set ((uint32_t)0x00000010) -#define CR_OPTPG_Reset ((uint32_t)0x00001FEF) -#define CR_OPTER_Set ((uint32_t)0x00000020) -#define CR_OPTER_Reset ((uint32_t)0x00001FDF) -#define CR_STRT_Set ((uint32_t)0x00000040) -#define CR_LOCK_Set ((uint32_t)0x00000080) - -/* FLASH Mask */ -#define RDPRT_Mask ((uint32_t)0x00000002) -#define WRP0_Mask ((uint32_t)0x000000FF) -#define WRP1_Mask ((uint32_t)0x0000FF00) -#define WRP2_Mask ((uint32_t)0x00FF0000) -#define WRP3_Mask ((uint32_t)0xFF000000) -#define OB_USER_BFB2 ((uint16_t)0x0008) - -/* FLASH Keys */ -#define RDP_Key ((uint16_t)0x00A5) -#define FLASH_KEY1 ((uint32_t)0x45670123) -#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) - -/* FLASH BANK address */ -#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF) - -/* Delay definition */ -#define EraseTimeout ((uint32_t)0x000B0000) -#define ProgramTimeout ((uint32_t)0x00002000) -/** - * @} - */ - -/** @defgroup FLASH_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup FLASH_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup FLASH_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup FLASH_Private_Functions - * @{ - */ - -/** -@code - - This driver provides functions to configure and program the Flash memory of all STM32F10x devices, - including the latest STM32F10x_XL density devices. - - STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability: - - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each) - - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each) - While other STM32F10x devices features only one bank with memory up to 512 Kbytes. - - In version V3.3.0, some functions were updated and new ones were added to support - STM32F10x_XL devices. Thus some functions manages all devices, while other are - dedicated for XL devices only. - - The table below presents the list of available functions depending on the used STM32F10x devices. - - *************************************************** - * Legacy functions used for all STM32F10x devices * - *************************************************** - +----------------------------------------------------------------------------------------------------------------------------------+ - | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | - | | devices | devices | | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_SetLatency | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_HalfCycleAccessCmd | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_PrefetchBufferCmd | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. | - | | | | - For other devices: unlock Bank1 and it is equivalent | - | | | | to FLASH_UnlockBank1 function. | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. | - | | | | - For other devices: lock Bank1 and it is equivalent | - | | | | to FLASH_LockBank1 function. | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 | - | | | | - For other devices: erase a page in Bank1 | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 | - | | | | - For other devices: erase all pages in Bank1 | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_EraseOptionBytes | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_ProgramOptionByteData | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_EnableWriteProtection | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_ReadOutProtection | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_UserOptionByteConfig | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_GetUserOptionByte | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_GetReadOutProtectionStatus | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_GetPrefetchBufferStatus | Yes | Yes | No change | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts| - | | | | - For other devices: enable Bank1's interrupts | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status| - | | | | - For other devices: return Bank1's flag status | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag | - | | | | - For other devices: clear Bank1's flag | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) | - | | | | equivalent to FLASH_GetBank1Status function | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) | - | | | | equivalent to: FLASH_WaitForLastBank1Operation function | - +----------------------------------------------------------------------------------------------------------------------------------+ - - ************************************************************************************************************************ - * New functions used for all STM32F10x devices to manage Bank1: * - * - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 * - * - For other devices, these functions are optional (covered by functions listed above) * - ************************************************************************************************************************ - +----------------------------------------------------------------------------------------------------------------------------------+ - | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | - | | devices | devices | | - |----------------------------------------------------------------------------------------------------------------------------------| - | FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_LockBank1 | Yes | Yes | - Lock Bank1 | - |----------------------------------------------------------------------------------------------------------------------------------| - | FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 | - |----------------------------------------------------------------------------------------------------------------------------------| - | FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 | - |----------------------------------------------------------------------------------------------------------------------------------| - | FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation | - +----------------------------------------------------------------------------------------------------------------------------------+ - - ***************************************************************************** - * New Functions used only with STM32F10x_XL density devices to manage Bank2 * - ***************************************************************************** - +----------------------------------------------------------------------------------------------------------------------------------+ - | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | - | | devices | devices | | - |----------------------------------------------------------------------------------------------------------------------------------| - | FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 | - |----------------------------------------------------------------------------------------------------------------------------------| - |FLASH_LockBank2 | Yes | No | - Lock Bank2 | - |----------------------------------------------------------------------------------------------------------------------------------| - | FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 | - |----------------------------------------------------------------------------------------------------------------------------------| - | FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 | - |----------------------------------------------------------------------------------------------------------------------------------| - | FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation | - |----------------------------------------------------------------------------------------------------------------------------------| - | FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 | - +----------------------------------------------------------------------------------------------------------------------------------+ -@endcode -*/ - - -/** - * @brief Sets the code latency value. - * @note This function can be used for all STM32F10x devices. - * @param FLASH_Latency: specifies the FLASH Latency value. - * This parameter can be one of the following values: - * @arg FLASH_Latency_0: FLASH Zero Latency cycle - * @arg FLASH_Latency_1: FLASH One Latency cycle - * @arg FLASH_Latency_2: FLASH Two Latency cycles - * @retval None - */ -void FLASH_SetLatency(uint32_t FLASH_Latency) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_FLASH_LATENCY(FLASH_Latency)); - - /* Read the ACR register */ - tmpreg = FLASH->ACR; - - /* Sets the Latency value */ - tmpreg &= ACR_LATENCY_Mask; - tmpreg |= FLASH_Latency; - - /* Write the ACR register */ - FLASH->ACR = tmpreg; -} - -/** - * @brief Enables or disables the Half cycle flash access. - * @note This function can be used for all STM32F10x devices. - * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode. - * This parameter can be one of the following values: - * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable - * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable - * @retval None - */ -void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess) -{ - /* Check the parameters */ - assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess)); - - /* Enable or disable the Half cycle access */ - FLASH->ACR &= ACR_HLFCYA_Mask; - FLASH->ACR |= FLASH_HalfCycleAccess; -} - -/** - * @brief Enables or disables the Prefetch Buffer. - * @note This function can be used for all STM32F10x devices. - * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status. - * This parameter can be one of the following values: - * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable - * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable - * @retval None - */ -void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer) -{ - /* Check the parameters */ - assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); - - /* Enable or disable the Prefetch Buffer */ - FLASH->ACR &= ACR_PRFTBE_Mask; - FLASH->ACR |= FLASH_PrefetchBuffer; -} - -/** - * @brief Unlocks the FLASH Program Erase Controller. - * @note This function can be used for all STM32F10x devices. - * - For STM32F10X_XL devices this function unlocks Bank1 and Bank2. - * - For all other devices it unlocks Bank1 and it is equivalent - * to FLASH_UnlockBank1 function.. - * @param None - * @retval None - */ -void FLASH_Unlock(void) -{ - /* Authorize the FPEC of Bank1 Access */ - FLASH->KEYR = FLASH_KEY1; - FLASH->KEYR = FLASH_KEY2; - -#ifdef STM32F10X_XL - /* Authorize the FPEC of Bank2 Access */ - FLASH->KEYR2 = FLASH_KEY1; - FLASH->KEYR2 = FLASH_KEY2; -#endif /* STM32F10X_XL */ -} -/** - * @brief Unlocks the FLASH Bank1 Program Erase Controller. - * @note This function can be used for all STM32F10x devices. - * - For STM32F10X_XL devices this function unlocks Bank1. - * - For all other devices it unlocks Bank1 and it is - * equivalent to FLASH_Unlock function. - * @param None - * @retval None - */ -void FLASH_UnlockBank1(void) -{ - /* Authorize the FPEC of Bank1 Access */ - FLASH->KEYR = FLASH_KEY1; - FLASH->KEYR = FLASH_KEY2; -} - -#ifdef STM32F10X_XL -/** - * @brief Unlocks the FLASH Bank2 Program Erase Controller. - * @note This function can be used only for STM32F10X_XL density devices. - * @param None - * @retval None - */ -void FLASH_UnlockBank2(void) -{ - /* Authorize the FPEC of Bank2 Access */ - FLASH->KEYR2 = FLASH_KEY1; - FLASH->KEYR2 = FLASH_KEY2; - -} -#endif /* STM32F10X_XL */ - -/** - * @brief Locks the FLASH Program Erase Controller. - * @note This function can be used for all STM32F10x devices. - * - For STM32F10X_XL devices this function Locks Bank1 and Bank2. - * - For all other devices it Locks Bank1 and it is equivalent - * to FLASH_LockBank1 function. - * @param None - * @retval None - */ -void FLASH_Lock(void) -{ - /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */ - FLASH->CR |= CR_LOCK_Set; - -#ifdef STM32F10X_XL - /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */ - FLASH->CR2 |= CR_LOCK_Set; -#endif /* STM32F10X_XL */ -} - -/** - * @brief Locks the FLASH Bank1 Program Erase Controller. - * @note this function can be used for all STM32F10x devices. - * - For STM32F10X_XL devices this function Locks Bank1. - * - For all other devices it Locks Bank1 and it is equivalent - * to FLASH_Lock function. - * @param None - * @retval None - */ -void FLASH_LockBank1(void) -{ - /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */ - FLASH->CR |= CR_LOCK_Set; -} - -#ifdef STM32F10X_XL -/** - * @brief Locks the FLASH Bank2 Program Erase Controller. - * @note This function can be used only for STM32F10X_XL density devices. - * @param None - * @retval None - */ -void FLASH_LockBank2(void) -{ - /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */ - FLASH->CR2 |= CR_LOCK_Set; -} -#endif /* STM32F10X_XL */ - -/** - * @brief Erases a specified FLASH page. - * @note This function can be used for all STM32F10x devices. - * @param Page_Address: The page address to be erased. - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_ErasePage(uint32_t Page_Address) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Page_Address)); - -#ifdef STM32F10X_XL - if(Page_Address < FLASH_BANK1_END_ADDRESS) - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank1Operation(EraseTimeout); - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase the page */ - FLASH->CR|= CR_PER_Set; - FLASH->AR = Page_Address; - FLASH->CR|= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank1Operation(EraseTimeout); - - /* Disable the PER Bit */ - FLASH->CR &= CR_PER_Reset; - } - } - else - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(EraseTimeout); - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase the page */ - FLASH->CR2|= CR_PER_Set; - FLASH->AR2 = Page_Address; - FLASH->CR2|= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(EraseTimeout); - - /* Disable the PER Bit */ - FLASH->CR2 &= CR_PER_Reset; - } - } -#else - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase the page */ - FLASH->CR|= CR_PER_Set; - FLASH->AR = Page_Address; - FLASH->CR|= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - /* Disable the PER Bit */ - FLASH->CR &= CR_PER_Reset; - } -#endif /* STM32F10X_XL */ - - /* Return the Erase Status */ - return status; -} - -/** - * @brief Erases all FLASH pages. - * @note This function can be used for all STM32F10x devices. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_EraseAllPages(void) -{ - FLASH_Status status = FLASH_COMPLETE; - -#ifdef STM32F10X_XL - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank1Operation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all pages */ - FLASH->CR |= CR_MER_Set; - FLASH->CR |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank1Operation(EraseTimeout); - - /* Disable the MER Bit */ - FLASH->CR &= CR_MER_Reset; - } - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all pages */ - FLASH->CR2 |= CR_MER_Set; - FLASH->CR2 |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(EraseTimeout); - - /* Disable the MER Bit */ - FLASH->CR2 &= CR_MER_Reset; - } -#else - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all pages */ - FLASH->CR |= CR_MER_Set; - FLASH->CR |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - /* Disable the MER Bit */ - FLASH->CR &= CR_MER_Reset; - } -#endif /* STM32F10X_XL */ - - /* Return the Erase Status */ - return status; -} - -/** - * @brief Erases all Bank1 FLASH pages. - * @note This function can be used for all STM32F10x devices. - * - For STM32F10X_XL devices this function erases all Bank1 pages. - * - For all other devices it erases all Bank1 pages and it is equivalent - * to FLASH_EraseAllPages function. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_EraseAllBank1Pages(void) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank1Operation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all pages */ - FLASH->CR |= CR_MER_Set; - FLASH->CR |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank1Operation(EraseTimeout); - - /* Disable the MER Bit */ - FLASH->CR &= CR_MER_Reset; - } - /* Return the Erase Status */ - return status; -} - -#ifdef STM32F10X_XL -/** - * @brief Erases all Bank2 FLASH pages. - * @note This function can be used only for STM32F10x_XL density devices. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_EraseAllBank2Pages(void) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all pages */ - FLASH->CR2 |= CR_MER_Set; - FLASH->CR2 |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(EraseTimeout); - - /* Disable the MER Bit */ - FLASH->CR2 &= CR_MER_Reset; - } - /* Return the Erase Status */ - return status; -} -#endif /* STM32F10X_XL */ - -/** - * @brief Erases the FLASH option bytes. - * @note This functions erases all option bytes except the Read protection (RDP). - * @note This function can be used for all STM32F10x devices. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_EraseOptionBytes(void) -{ - uint16_t rdptmp = RDP_Key; - - FLASH_Status status = FLASH_COMPLETE; - - /* Get the actual read protection Option Byte value */ - if(FLASH_GetReadOutProtectionStatus() != RESET) - { - rdptmp = 0x00; - } - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - if(status == FLASH_COMPLETE) - { - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* if the previous operation is completed, proceed to erase the option bytes */ - FLASH->CR |= CR_OPTER_Set; - FLASH->CR |= CR_STRT_Set; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the erase operation is completed, disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - /* Restore the last read protection Option Byte value */ - OB->RDP = (uint16_t)rdptmp; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - else - { - if (status != FLASH_TIMEOUT) - { - /* Disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - } - /* Return the erase status */ - return status; -} - -/** - * @brief Programs a word at a specified address. - * @note This function can be used for all STM32F10x devices. - * @param Address: specifies the address to be programmed. - * @param Data: specifies the data to be programmed. - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) -{ - FLASH_Status status = FLASH_COMPLETE; - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - -#ifdef STM32F10X_XL - if(Address < FLASH_BANK1_END_ADDRESS - 2) - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank1Operation(ProgramTimeout); - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new first - half word */ - FLASH->CR |= CR_PG_Set; - - *(__IO uint16_t*)Address = (uint16_t)Data; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new second - half word */ - tmp = Address + 2; - - *(__IO uint16_t*) tmp = Data >> 16; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - else - { - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - } - else if(Address == (FLASH_BANK1_END_ADDRESS - 1)) - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank1Operation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new first - half word */ - FLASH->CR |= CR_PG_Set; - - *(__IO uint16_t*)Address = (uint16_t)Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank1Operation(ProgramTimeout); - - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - else - { - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new second - half word */ - FLASH->CR2 |= CR_PG_Set; - tmp = Address + 2; - - *(__IO uint16_t*) tmp = Data >> 16; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(ProgramTimeout); - - /* Disable the PG Bit */ - FLASH->CR2 &= CR_PG_Reset; - } - else - { - /* Disable the PG Bit */ - FLASH->CR2 &= CR_PG_Reset; - } - } - else - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new first - half word */ - FLASH->CR2 |= CR_PG_Set; - - *(__IO uint16_t*)Address = (uint16_t)Data; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new second - half word */ - tmp = Address + 2; - - *(__IO uint16_t*) tmp = Data >> 16; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(ProgramTimeout); - - /* Disable the PG Bit */ - FLASH->CR2 &= CR_PG_Reset; - } - else - { - /* Disable the PG Bit */ - FLASH->CR2 &= CR_PG_Reset; - } - } - } -#else - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new first - half word */ - FLASH->CR |= CR_PG_Set; - - *(__IO uint16_t*)Address = (uint16_t)Data; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new second - half word */ - tmp = Address + 2; - - *(__IO uint16_t*) tmp = Data >> 16; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - else - { - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } -#endif /* STM32F10X_XL */ - - /* Return the Program Status */ - return status; -} - -/** - * @brief Programs a half word at a specified address. - * @note This function can be used for all STM32F10x devices. - * @param Address: specifies the address to be programmed. - * @param Data: specifies the data to be programmed. - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - -#ifdef STM32F10X_XL - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(Address < FLASH_BANK1_END_ADDRESS) - { - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new data */ - FLASH->CR |= CR_PG_Set; - - *(__IO uint16_t*)Address = Data; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank1Operation(ProgramTimeout); - - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - else - { - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new data */ - FLASH->CR2 |= CR_PG_Set; - - *(__IO uint16_t*)Address = Data; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastBank2Operation(ProgramTimeout); - - /* Disable the PG Bit */ - FLASH->CR2 &= CR_PG_Reset; - } - } -#else - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new data */ - FLASH->CR |= CR_PG_Set; - - *(__IO uint16_t*)Address = Data; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } -#endif /* STM32F10X_XL */ - - /* Return the Program Status */ - return status; -} - -/** - * @brief Programs a half word at a specified Option Byte Data address. - * @note This function can be used for all STM32F10x devices. - * @param Address: specifies the address to be programmed. - * This parameter can be 0x1FFFF804 or 0x1FFFF806. - * @param Data: specifies the data to be programmed. - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Check the parameters */ - assert_param(IS_OB_DATA_ADDRESS(Address)); - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - /* Enables the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - *(__IO uint16_t*)Address = Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the Option Byte Data Program Status */ - return status; -} - -/** - * @brief Write protects the desired pages - * @note This function can be used for all STM32F10x devices. - * @param FLASH_Pages: specifies the address of the pages to be write protected. - * This parameter can be: - * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31 - * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3 - * and FLASH_WRProt_Pages124to127 - * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and - * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255 - * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and - * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127 - * @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and - * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511 - * @arg FLASH_WRProt_AllPages - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages) -{ - uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; - - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages)); - - FLASH_Pages = (uint32_t)(~FLASH_Pages); - WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask); - WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8); - WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16); - WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorizes the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - FLASH->CR |= CR_OPTPG_Set; - if(WRP0_Data != 0xFF) - { - OB->WRP0 = WRP0_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF)) - { - OB->WRP1 = WRP1_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF)) - { - OB->WRP2 = WRP2_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - - if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF)) - { - OB->WRP3 = WRP3_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the write protection operation Status */ - return status; -} - -/** - * @brief Enables or disables the read out protection. - * @note If the user has already programmed the other option bytes before calling - * this function, he must re-program them since this function erases all option bytes. - * @note This function can be used for all STM32F10x devices. - * @param Newstate: new state of the ReadOut Protection. - * This parameter can be: ENABLE or DISABLE. - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - status = FLASH_WaitForLastOperation(EraseTimeout); - if(status == FLASH_COMPLETE) - { - /* Authorizes the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - FLASH->CR |= CR_OPTER_Set; - FLASH->CR |= CR_STRT_Set; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - if(status == FLASH_COMPLETE) - { - /* if the erase operation is completed, disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - if(NewState != DISABLE) - { - OB->RDP = 0x00; - } - else - { - OB->RDP = RDP_Key; - } - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - else - { - if(status != FLASH_TIMEOUT) - { - /* Disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - } - } - } - /* Return the protection operation Status */ - return status; -} - -/** - * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. - * @note This function can be used for all STM32F10x devices. - * @param OB_IWDG: Selects the IWDG mode - * This parameter can be one of the following values: - * @arg OB_IWDG_SW: Software IWDG selected - * @arg OB_IWDG_HW: Hardware IWDG selected - * @param OB_STOP: Reset event when entering STOP mode. - * This parameter can be one of the following values: - * @arg OB_STOP_NoRST: No reset generated when entering in STOP - * @arg OB_STOP_RST: Reset generated when entering in STOP - * @param OB_STDBY: Reset event when entering Standby mode. - * This parameter can be one of the following values: - * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY - * @arg OB_STDBY_RST: Reset generated when entering in STANDBY - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); - assert_param(IS_OB_STOP_SOURCE(OB_STOP)); - assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); - - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - - OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8))); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the Option Byte program Status */ - return status; -} - -#ifdef STM32F10X_XL -/** - * @brief Configures to boot from Bank1 or Bank2. - * @note This function can be used only for STM32F10x_XL density devices. - * @param FLASH_BOOT: select the FLASH Bank to boot from. - * This parameter can be one of the following values: - * @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash - * position and this parameter is selected the device will boot from Bank1(Default). - * @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash - * position and this parameter is selected the device will boot from Bank2 or Bank1, - * depending on the activation of the bank. The active banks are checked in - * the following order: Bank2, followed by Bank1. - * The active bank is recognized by the value programmed at the base address - * of the respective bank (corresponding to the initial stack pointer value - * in the interrupt vector table). - * For more information, please refer to AN2606 from www.st.com. - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT) -{ - FLASH_Status status = FLASH_COMPLETE; - assert_param(IS_FLASH_BOOT(FLASH_BOOT)); - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - - if(FLASH_BOOT == FLASH_BOOT_Bank1) - { - OB->USER |= OB_USER_BFB2; - } - else - { - OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2)); - } - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the Option Byte program Status */ - return status; -} -#endif /* STM32F10X_XL */ - -/** - * @brief Returns the FLASH User Option Bytes values. - * @note This function can be used for all STM32F10x devices. - * @param None - * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1) - * and RST_STDBY(Bit2). - */ -uint32_t FLASH_GetUserOptionByte(void) -{ - /* Return the User Option Byte */ - return (uint32_t)(FLASH->OBR >> 2); -} - -/** - * @brief Returns the FLASH Write Protection Option Bytes Register value. - * @note This function can be used for all STM32F10x devices. - * @param None - * @retval The FLASH Write Protection Option Bytes Register value - */ -uint32_t FLASH_GetWriteProtectionOptionByte(void) -{ - /* Return the Flash write protection Register value */ - return (uint32_t)(FLASH->WRPR); -} - -/** - * @brief Checks whether the FLASH Read Out Protection Status is set or not. - * @note This function can be used for all STM32F10x devices. - * @param None - * @retval FLASH ReadOut Protection Status(SET or RESET) - */ -FlagStatus FLASH_GetReadOutProtectionStatus(void) -{ - FlagStatus readoutstatus = RESET; - if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET) - { - readoutstatus = SET; - } - else - { - readoutstatus = RESET; - } - return readoutstatus; -} - -/** - * @brief Checks whether the FLASH Prefetch Buffer status is set or not. - * @note This function can be used for all STM32F10x devices. - * @param None - * @retval FLASH Prefetch Buffer Status (SET or RESET). - */ -FlagStatus FLASH_GetPrefetchBufferStatus(void) -{ - FlagStatus bitstatus = RESET; - - if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */ - return bitstatus; -} - -/** - * @brief Enables or disables the specified FLASH interrupts. - * @note This function can be used for all STM32F10x devices. - * - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts - for Bank1 and Bank2. - * - For other devices it enables or disables the specified FLASH interrupts for Bank1. - * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg FLASH_IT_ERROR: FLASH Error Interrupt - * @arg FLASH_IT_EOP: FLASH end of operation Interrupt - * @param NewState: new state of the specified Flash interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState) -{ -#ifdef STM32F10X_XL - /* Check the parameters */ - assert_param(IS_FLASH_IT(FLASH_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if((FLASH_IT & 0x80000000) != 0x0) - { - if(NewState != DISABLE) - { - /* Enable the interrupt sources */ - FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF); - } - else - { - /* Disable the interrupt sources */ - FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF); - } - } - else - { - if(NewState != DISABLE) - { - /* Enable the interrupt sources */ - FLASH->CR |= FLASH_IT; - } - else - { - /* Disable the interrupt sources */ - FLASH->CR &= ~(uint32_t)FLASH_IT; - } - } -#else - /* Check the parameters */ - assert_param(IS_FLASH_IT(FLASH_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if(NewState != DISABLE) - { - /* Enable the interrupt sources */ - FLASH->CR |= FLASH_IT; - } - else - { - /* Disable the interrupt sources */ - FLASH->CR &= ~(uint32_t)FLASH_IT; - } -#endif /* STM32F10X_XL */ -} - -/** - * @brief Checks whether the specified FLASH flag is set or not. - * @note This function can be used for all STM32F10x devices. - * - For STM32F10X_XL devices, this function checks whether the specified - * Bank1 or Bank2 flag is set or not. - * - For other devices, it checks whether the specified Bank1 flag is - * set or not. - * @param FLASH_FLAG: specifies the FLASH flag to check. - * This parameter can be one of the following values: - * @arg FLASH_FLAG_BSY: FLASH Busy flag - * @arg FLASH_FLAG_PGERR: FLASH Program error flag - * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag - * @arg FLASH_FLAG_EOP: FLASH End of Operation flag - * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag - * @retval The new state of FLASH_FLAG (SET or RESET). - */ -FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG) -{ - FlagStatus bitstatus = RESET; - -#ifdef STM32F10X_XL - /* Check the parameters */ - assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; - if(FLASH_FLAG == FLASH_FLAG_OPTERR) - { - if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } - else - { - if((FLASH_FLAG & 0x80000000) != 0x0) - { - if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } - else - { - if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } - } -#else - /* Check the parameters */ - assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; - if(FLASH_FLAG == FLASH_FLAG_OPTERR) - { - if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } - else - { - if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } -#endif /* STM32F10X_XL */ - - /* Return the new state of FLASH_FLAG (SET or RESET) */ - return bitstatus; -} - -/** - * @brief Clears the FLASH's pending flags. - * @note This function can be used for all STM32F10x devices. - * - For STM32F10X_XL devices, this function clears Bank1 or Bank2’s pending flags - * - For other devices, it clears Bank1’s pending flags. - * @param FLASH_FLAG: specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_PGERR: FLASH Program error flag - * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag - * @arg FLASH_FLAG_EOP: FLASH End of Operation flag - * @retval None - */ -void FLASH_ClearFlag(uint32_t FLASH_FLAG) -{ -#ifdef STM32F10X_XL - /* Check the parameters */ - assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; - - if((FLASH_FLAG & 0x80000000) != 0x0) - { - /* Clear the flags */ - FLASH->SR2 = FLASH_FLAG; - } - else - { - /* Clear the flags */ - FLASH->SR = FLASH_FLAG; - } - -#else - /* Check the parameters */ - assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; - - /* Clear the flags */ - FLASH->SR = FLASH_FLAG; -#endif /* STM32F10X_XL */ -} - -/** - * @brief Returns the FLASH Status. - * @note This function can be used for all STM32F10x devices, it is equivalent - * to FLASH_GetBank1Status function. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, - * FLASH_ERROR_WRP or FLASH_COMPLETE - */ -FLASH_Status FLASH_GetStatus(void) -{ - FLASH_Status flashstatus = FLASH_COMPLETE; - - if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) - { - flashstatus = FLASH_BUSY; - } - else - { - if((FLASH->SR & FLASH_FLAG_PGERR) != 0) - { - flashstatus = FLASH_ERROR_PG; - } - else - { - if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 ) - { - flashstatus = FLASH_ERROR_WRP; - } - else - { - flashstatus = FLASH_COMPLETE; - } - } - } - /* Return the Flash Status */ - return flashstatus; -} - -/** - * @brief Returns the FLASH Bank1 Status. - * @note This function can be used for all STM32F10x devices, it is equivalent - * to FLASH_GetStatus function. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, - * FLASH_ERROR_WRP or FLASH_COMPLETE - */ -FLASH_Status FLASH_GetBank1Status(void) -{ - FLASH_Status flashstatus = FLASH_COMPLETE; - - if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY) - { - flashstatus = FLASH_BUSY; - } - else - { - if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0) - { - flashstatus = FLASH_ERROR_PG; - } - else - { - if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 ) - { - flashstatus = FLASH_ERROR_WRP; - } - else - { - flashstatus = FLASH_COMPLETE; - } - } - } - /* Return the Flash Status */ - return flashstatus; -} - -#ifdef STM32F10X_XL -/** - * @brief Returns the FLASH Bank2 Status. - * @note This function can be used for STM32F10x_XL density devices. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, - * FLASH_ERROR_WRP or FLASH_COMPLETE - */ -FLASH_Status FLASH_GetBank2Status(void) -{ - FLASH_Status flashstatus = FLASH_COMPLETE; - - if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) - { - flashstatus = FLASH_BUSY; - } - else - { - if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0) - { - flashstatus = FLASH_ERROR_PG; - } - else - { - if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 ) - { - flashstatus = FLASH_ERROR_WRP; - } - else - { - flashstatus = FLASH_COMPLETE; - } - } - } - /* Return the Flash Status */ - return flashstatus; -} -#endif /* STM32F10X_XL */ -/** - * @brief Waits for a Flash operation to complete or a TIMEOUT to occur. - * @note This function can be used for all STM32F10x devices, - * it is equivalent to FLASH_WaitForLastBank1Operation. - * - For STM32F10X_XL devices this function waits for a Bank1 Flash operation - * to complete or a TIMEOUT to occur. - * - For all other devices it waits for a Flash operation to complete - * or a TIMEOUT to occur. - * @param Timeout: FLASH programming Timeout - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check for the Flash Status */ - status = FLASH_GetBank1Status(); - /* Wait for a Flash operation to complete or a TIMEOUT to occur */ - while((status == FLASH_BUSY) && (Timeout != 0x00)) - { - status = FLASH_GetBank1Status(); - Timeout--; - } - if(Timeout == 0x00 ) - { - status = FLASH_TIMEOUT; - } - /* Return the operation status */ - return status; -} - -/** - * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. - * @note This function can be used for all STM32F10x devices, - * it is equivalent to FLASH_WaitForLastOperation. - * @param Timeout: FLASH programming Timeout - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check for the Flash Status */ - status = FLASH_GetBank1Status(); - /* Wait for a Flash operation to complete or a TIMEOUT to occur */ - while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00)) - { - status = FLASH_GetBank1Status(); - Timeout--; - } - if(Timeout == 0x00 ) - { - status = FLASH_TIMEOUT; - } - /* Return the operation status */ - return status; -} - -#ifdef STM32F10X_XL -/** - * @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur. - * @note This function can be used only for STM32F10x_XL density devices. - * @param Timeout: FLASH programming Timeout - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check for the Flash Status */ - status = FLASH_GetBank2Status(); - /* Wait for a Flash operation to complete or a TIMEOUT to occur */ - while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00)) - { - status = FLASH_GetBank2Status(); - Timeout--; - } - if(Timeout == 0x00 ) - { - status = FLASH_TIMEOUT; - } - /* Return the operation status */ - return status; -} -#endif /* STM32F10X_XL */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c deleted file mode 100644 index 457ff11..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c +++ /dev/null @@ -1,650 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_gpio.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the GPIO firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_gpio.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup GPIO - * @brief GPIO driver modules - * @{ - */ - -/** @defgroup GPIO_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup GPIO_Private_Defines - * @{ - */ - -/* ------------ RCC registers bit address in the alias region ----------------*/ -#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE) - -/* --- EVENTCR Register -----*/ - -/* Alias word address of EVOE bit */ -#define EVCR_OFFSET (AFIO_OFFSET + 0x00) -#define EVOE_BitNumber ((uint8_t)0x07) -#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4)) - - -/* --- MAPR Register ---*/ -/* Alias word address of MII_RMII_SEL bit */ -#define MAPR_OFFSET (AFIO_OFFSET + 0x04) -#define MII_RMII_SEL_BitNumber ((u8)0x17) -#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4)) - - -#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80) -#define LSB_MASK ((uint16_t)0xFFFF) -#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000) -#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF) -#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000) -#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000) -/** - * @} - */ - -/** @defgroup GPIO_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup GPIO_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup GPIO_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup GPIO_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the GPIOx peripheral registers to their default reset values. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @retval None - */ -void GPIO_DeInit(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - if (GPIOx == GPIOA) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE); - } - else if (GPIOx == GPIOB) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE); - } - else if (GPIOx == GPIOC) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE); - } - else if (GPIOx == GPIOD) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE); - } - else if (GPIOx == GPIOE) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE); - } - else if (GPIOx == GPIOF) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE); - } - else - { - if (GPIOx == GPIOG) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE); - } - } -} - -/** - * @brief Deinitializes the Alternate Functions (remap, event control - * and EXTI configuration) registers to their default reset values. - * @param None - * @retval None - */ -void GPIO_AFIODeInit(void) -{ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE); -} - -/** - * @brief Initializes the GPIOx peripheral according to the specified - * parameters in the GPIO_InitStruct. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that - * contains the configuration information for the specified GPIO peripheral. - * @retval None - */ -void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) -{ - uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00; - uint32_t tmpreg = 0x00, pinmask = 0x00; - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); - assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); - -/*---------------------------- GPIO Mode Configuration -----------------------*/ - currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F); - if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00) - { - /* Check the parameters */ - assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); - /* Output mode */ - currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed; - } -/*---------------------------- GPIO CRL Configuration ------------------------*/ - /* Configure the eight low port pins */ - if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00) - { - tmpreg = GPIOx->CRL; - for (pinpos = 0x00; pinpos < 0x08; pinpos++) - { - pos = ((uint32_t)0x01) << pinpos; - /* Get the port pins position */ - currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; - if (currentpin == pos) - { - pos = pinpos << 2; - /* Clear the corresponding low control register bits */ - pinmask = ((uint32_t)0x0F) << pos; - tmpreg &= ~pinmask; - /* Write the mode configuration in the corresponding bits */ - tmpreg |= (currentmode << pos); - /* Reset the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) - { - GPIOx->BRR = (((uint32_t)0x01) << pinpos); - } - else - { - /* Set the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) - { - GPIOx->BSRR = (((uint32_t)0x01) << pinpos); - } - } - } - } - GPIOx->CRL = tmpreg; - } -/*---------------------------- GPIO CRH Configuration ------------------------*/ - /* Configure the eight high port pins */ - if (GPIO_InitStruct->GPIO_Pin > 0x00FF) - { - tmpreg = GPIOx->CRH; - for (pinpos = 0x00; pinpos < 0x08; pinpos++) - { - pos = (((uint32_t)0x01) << (pinpos + 0x08)); - /* Get the port pins position */ - currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos); - if (currentpin == pos) - { - pos = pinpos << 2; - /* Clear the corresponding high control register bits */ - pinmask = ((uint32_t)0x0F) << pos; - tmpreg &= ~pinmask; - /* Write the mode configuration in the corresponding bits */ - tmpreg |= (currentmode << pos); - /* Reset the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) - { - GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08)); - } - /* Set the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) - { - GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08)); - } - } - } - GPIOx->CRH = tmpreg; - } -} - -/** - * @brief Fills each GPIO_InitStruct member with its default value. - * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) -{ - /* Reset GPIO init structure parameters values */ - GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; - GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING; -} - -/** - * @brief Reads the specified input port pin. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bit to read. - * This parameter can be GPIO_Pin_x where x can be (0..15). - * @retval The input port pin value. - */ -uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint8_t bitstatus = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET) - { - bitstatus = (uint8_t)Bit_SET; - } - else - { - bitstatus = (uint8_t)Bit_RESET; - } - return bitstatus; -} - -/** - * @brief Reads the specified GPIO input data port. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @retval GPIO input data port value. - */ -uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - return ((uint16_t)GPIOx->IDR); -} - -/** - * @brief Reads the specified output data port bit. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bit to read. - * This parameter can be GPIO_Pin_x where x can be (0..15). - * @retval The output port pin value. - */ -uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint8_t bitstatus = 0x00; - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET) - { - bitstatus = (uint8_t)Bit_SET; - } - else - { - bitstatus = (uint8_t)Bit_RESET; - } - return bitstatus; -} - -/** - * @brief Reads the specified GPIO output data port. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @retval GPIO output data port value. - */ -uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - return ((uint16_t)GPIOx->ODR); -} - -/** - * @brief Sets the selected data port bits. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bits to be written. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->BSRR = GPIO_Pin; -} - -/** - * @brief Clears the selected data port bits. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bits to be written. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->BRR = GPIO_Pin; -} - -/** - * @brief Sets or clears the selected data port bit. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bit to be written. - * This parameter can be one of GPIO_Pin_x where x can be (0..15). - * @param BitVal: specifies the value to be written to the selected bit. - * This parameter can be one of the BitAction enum values: - * @arg Bit_RESET: to clear the port pin - * @arg Bit_SET: to set the port pin - * @retval None - */ -void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_BIT_ACTION(BitVal)); - - if (BitVal != Bit_RESET) - { - GPIOx->BSRR = GPIO_Pin; - } - else - { - GPIOx->BRR = GPIO_Pin; - } -} - -/** - * @brief Writes data to the specified GPIO data port. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param PortVal: specifies the value to be written to the port output data register. - * @retval None - */ -void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - GPIOx->ODR = PortVal; -} - -/** - * @brief Locks GPIO Pins configuration registers. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bit to be written. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint32_t tmp = 0x00010000; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - tmp |= GPIO_Pin; - /* Set LCKK bit */ - GPIOx->LCKR = tmp; - /* Reset LCKK bit */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKK bit */ - GPIOx->LCKR = tmp; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; -} - -/** - * @brief Selects the GPIO pin used as Event output. - * @param GPIO_PortSource: selects the GPIO port to be used as source - * for Event output. - * This parameter can be GPIO_PortSourceGPIOx where x can be (A..E). - * @param GPIO_PinSource: specifies the pin for the Event output. - * This parameter can be GPIO_PinSourcex where x can be (0..15). - * @retval None - */ -void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) -{ - uint32_t tmpreg = 0x00; - /* Check the parameters */ - assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource)); - assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); - - tmpreg = AFIO->EVCR; - /* Clear the PORT[6:4] and PIN[3:0] bits */ - tmpreg &= EVCR_PORTPINCONFIG_MASK; - tmpreg |= (uint32_t)GPIO_PortSource << 0x04; - tmpreg |= GPIO_PinSource; - AFIO->EVCR = tmpreg; -} - -/** - * @brief Enables or disables the Event Output. - * @param NewState: new state of the Event output. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void GPIO_EventOutputCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState; -} - -/** - * @brief Changes the mapping of the specified pin. - * @param GPIO_Remap: selects the pin to remap. - * This parameter can be one of the following values: - * @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping - * @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping - * @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping - * @arg GPIO_Remap_USART2 : USART2 Alternate Function mapping - * @arg GPIO_PartialRemap_USART3 : USART3 Partial Alternate Function mapping - * @arg GPIO_FullRemap_USART3 : USART3 Full Alternate Function mapping - * @arg GPIO_PartialRemap_TIM1 : TIM1 Partial Alternate Function mapping - * @arg GPIO_FullRemap_TIM1 : TIM1 Full Alternate Function mapping - * @arg GPIO_PartialRemap1_TIM2 : TIM2 Partial1 Alternate Function mapping - * @arg GPIO_PartialRemap2_TIM2 : TIM2 Partial2 Alternate Function mapping - * @arg GPIO_FullRemap_TIM2 : TIM2 Full Alternate Function mapping - * @arg GPIO_PartialRemap_TIM3 : TIM3 Partial Alternate Function mapping - * @arg GPIO_FullRemap_TIM3 : TIM3 Full Alternate Function mapping - * @arg GPIO_Remap_TIM4 : TIM4 Alternate Function mapping - * @arg GPIO_Remap1_CAN1 : CAN1 Alternate Function mapping - * @arg GPIO_Remap2_CAN1 : CAN1 Alternate Function mapping - * @arg GPIO_Remap_PD01 : PD01 Alternate Function mapping - * @arg GPIO_Remap_TIM5CH4_LSI : LSI connected to TIM5 Channel4 input capture for calibration - * @arg GPIO_Remap_ADC1_ETRGINJ : ADC1 External Trigger Injected Conversion remapping - * @arg GPIO_Remap_ADC1_ETRGREG : ADC1 External Trigger Regular Conversion remapping - * @arg GPIO_Remap_ADC2_ETRGINJ : ADC2 External Trigger Injected Conversion remapping - * @arg GPIO_Remap_ADC2_ETRGREG : ADC2 External Trigger Regular Conversion remapping - * @arg GPIO_Remap_ETH : Ethernet remapping (only for Connectivity line devices) - * @arg GPIO_Remap_CAN2 : CAN2 remapping (only for Connectivity line devices) - * @arg GPIO_Remap_SWJ_NoJTRST : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST - * @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled - * @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP) - * @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) - * When the SPI3/I2S3 is remapped using this function, the SWJ is configured - * to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST. - * @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected - * to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices) - * If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to - * Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output. - * @arg GPIO_Remap_PTP_PPS : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) - * @arg GPIO_Remap_TIM15 : TIM15 Alternate Function mapping (only for Value line devices) - * @arg GPIO_Remap_TIM16 : TIM16 Alternate Function mapping (only for Value line devices) - * @arg GPIO_Remap_TIM17 : TIM17 Alternate Function mapping (only for Value line devices) - * @arg GPIO_Remap_CEC : CEC Alternate Function mapping (only for Value line devices) - * @arg GPIO_Remap_TIM1_DMA : TIM1 DMA requests mapping (only for Value line devices) - * @arg GPIO_Remap_TIM9 : TIM9 Alternate Function mapping (only for XL-density devices) - * @arg GPIO_Remap_TIM10 : TIM10 Alternate Function mapping (only for XL-density devices) - * @arg GPIO_Remap_TIM11 : TIM11 Alternate Function mapping (only for XL-density devices) - * @arg GPIO_Remap_TIM13 : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) - * @arg GPIO_Remap_TIM14 : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) - * @arg GPIO_Remap_FSMC_NADV : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) - * @arg GPIO_Remap_TIM67_DAC_DMA : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) - * @arg GPIO_Remap_TIM12 : TIM12 Alternate Function mapping (only for High density Value line devices) - * @arg GPIO_Remap_MISC : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, - * only for High density Value line devices) - * @param NewState: new state of the port pin remapping. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState) -{ - uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_REMAP(GPIO_Remap)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if((GPIO_Remap & 0x80000000) == 0x80000000) - { - tmpreg = AFIO->MAPR2; - } - else - { - tmpreg = AFIO->MAPR; - } - - tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10; - tmp = GPIO_Remap & LSB_MASK; - - if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) - { - tmpreg &= DBGAFR_SWJCFG_MASK; - AFIO->MAPR &= DBGAFR_SWJCFG_MASK; - } - else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK) - { - tmp1 = ((uint32_t)0x03) << tmpmask; - tmpreg &= ~tmp1; - tmpreg |= ~DBGAFR_SWJCFG_MASK; - } - else - { - tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10)); - tmpreg |= ~DBGAFR_SWJCFG_MASK; - } - - if (NewState != DISABLE) - { - tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10)); - } - - if((GPIO_Remap & 0x80000000) == 0x80000000) - { - AFIO->MAPR2 = tmpreg; - } - else - { - AFIO->MAPR = tmpreg; - } -} - -/** - * @brief Selects the GPIO pin used as EXTI Line. - * @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines. - * This parameter can be GPIO_PortSourceGPIOx where x can be (A..G). - * @param GPIO_PinSource: specifies the EXTI line to be configured. - * This parameter can be GPIO_PinSourcex where x can be (0..15). - * @retval None - */ -void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) -{ - uint32_t tmp = 0x00; - /* Check the parameters */ - assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource)); - assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); - - tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)); - AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp; - AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03))); -} - -/** - * @brief Selects the Ethernet media interface. - * @note This function applies only to STM32 Connectivity line devices. - * @param GPIO_ETH_MediaInterface: specifies the Media Interface mode. - * This parameter can be one of the following values: - * @arg GPIO_ETH_MediaInterface_MII: MII mode - * @arg GPIO_ETH_MediaInterface_RMII: RMII mode - * @retval None - */ -void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface) -{ - assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface)); - - /* Configure MII_RMII selection bit */ - *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c deleted file mode 100644 index 4ea321c..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c +++ /dev/null @@ -1,1331 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_i2c.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the I2C firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_i2c.h" -#include "stm32f10x_rcc.h" - - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup I2C - * @brief I2C driver modules - * @{ - */ - -/** @defgroup I2C_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup I2C_Private_Defines - * @{ - */ - -/* I2C SPE mask */ -#define CR1_PE_Set ((uint16_t)0x0001) -#define CR1_PE_Reset ((uint16_t)0xFFFE) - -/* I2C START mask */ -#define CR1_START_Set ((uint16_t)0x0100) -#define CR1_START_Reset ((uint16_t)0xFEFF) - -/* I2C STOP mask */ -#define CR1_STOP_Set ((uint16_t)0x0200) -#define CR1_STOP_Reset ((uint16_t)0xFDFF) - -/* I2C ACK mask */ -#define CR1_ACK_Set ((uint16_t)0x0400) -#define CR1_ACK_Reset ((uint16_t)0xFBFF) - -/* I2C ENGC mask */ -#define CR1_ENGC_Set ((uint16_t)0x0040) -#define CR1_ENGC_Reset ((uint16_t)0xFFBF) - -/* I2C SWRST mask */ -#define CR1_SWRST_Set ((uint16_t)0x8000) -#define CR1_SWRST_Reset ((uint16_t)0x7FFF) - -/* I2C PEC mask */ -#define CR1_PEC_Set ((uint16_t)0x1000) -#define CR1_PEC_Reset ((uint16_t)0xEFFF) - -/* I2C ENPEC mask */ -#define CR1_ENPEC_Set ((uint16_t)0x0020) -#define CR1_ENPEC_Reset ((uint16_t)0xFFDF) - -/* I2C ENARP mask */ -#define CR1_ENARP_Set ((uint16_t)0x0010) -#define CR1_ENARP_Reset ((uint16_t)0xFFEF) - -/* I2C NOSTRETCH mask */ -#define CR1_NOSTRETCH_Set ((uint16_t)0x0080) -#define CR1_NOSTRETCH_Reset ((uint16_t)0xFF7F) - -/* I2C registers Masks */ -#define CR1_CLEAR_Mask ((uint16_t)0xFBF5) - -/* I2C DMAEN mask */ -#define CR2_DMAEN_Set ((uint16_t)0x0800) -#define CR2_DMAEN_Reset ((uint16_t)0xF7FF) - -/* I2C LAST mask */ -#define CR2_LAST_Set ((uint16_t)0x1000) -#define CR2_LAST_Reset ((uint16_t)0xEFFF) - -/* I2C FREQ mask */ -#define CR2_FREQ_Reset ((uint16_t)0xFFC0) - -/* I2C ADD0 mask */ -#define OAR1_ADD0_Set ((uint16_t)0x0001) -#define OAR1_ADD0_Reset ((uint16_t)0xFFFE) - -/* I2C ENDUAL mask */ -#define OAR2_ENDUAL_Set ((uint16_t)0x0001) -#define OAR2_ENDUAL_Reset ((uint16_t)0xFFFE) - -/* I2C ADD2 mask */ -#define OAR2_ADD2_Reset ((uint16_t)0xFF01) - -/* I2C F/S mask */ -#define CCR_FS_Set ((uint16_t)0x8000) - -/* I2C CCR mask */ -#define CCR_CCR_Set ((uint16_t)0x0FFF) - -/* I2C FLAG mask */ -#define FLAG_Mask ((uint32_t)0x00FFFFFF) - -/* I2C Interrupt Enable mask */ -#define ITEN_Mask ((uint32_t)0x07000000) - -/** - * @} - */ - -/** @defgroup I2C_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup I2C_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup I2C_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup I2C_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the I2Cx peripheral registers to their default reset values. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @retval None - */ -void I2C_DeInit(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - if (I2Cx == I2C1) - { - /* Enable I2C1 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE); - /* Release I2C1 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE); - } - else - { - /* Enable I2C2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE); - /* Release I2C2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE); - } -} - -/** - * @brief Initializes the I2Cx peripheral according to the specified - * parameters in the I2C_InitStruct. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_InitStruct: pointer to a I2C_InitTypeDef structure that - * contains the configuration information for the specified I2C peripheral. - * @retval None - */ -void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct) -{ - uint16_t tmpreg = 0, freqrange = 0; - uint16_t result = 0x04; - uint32_t pclk1 = 8000000; - RCC_ClocksTypeDef rcc_clocks; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed)); - assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode)); - assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle)); - assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1)); - assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack)); - assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress)); - -/*---------------------------- I2Cx CR2 Configuration ------------------------*/ - /* Get the I2Cx CR2 value */ - tmpreg = I2Cx->CR2; - /* Clear frequency FREQ[5:0] bits */ - tmpreg &= CR2_FREQ_Reset; - /* Get pclk1 frequency value */ - RCC_GetClocksFreq(&rcc_clocks); - pclk1 = rcc_clocks.PCLK1_Frequency; - /* Set frequency bits depending on pclk1 value */ - freqrange = (uint16_t)(pclk1 / 1000000); - tmpreg |= freqrange; - /* Write to I2Cx CR2 */ - I2Cx->CR2 = tmpreg; - -/*---------------------------- I2Cx CCR Configuration ------------------------*/ - /* Disable the selected I2C peripheral to configure TRISE */ - I2Cx->CR1 &= CR1_PE_Reset; - /* Reset tmpreg value */ - /* Clear F/S, DUTY and CCR[11:0] bits */ - tmpreg = 0; - - /* Configure speed in standard mode */ - if (I2C_InitStruct->I2C_ClockSpeed <= 100000) - { - /* Standard mode speed calculate */ - result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1)); - /* Test if CCR value is under 0x4*/ - if (result < 0x04) - { - /* Set minimum allowed value */ - result = 0x04; - } - /* Set speed value for standard mode */ - tmpreg |= result; - /* Set Maximum Rise Time for standard mode */ - I2Cx->TRISE = freqrange + 1; - } - /* Configure speed in fast mode */ - else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/ - { - if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2) - { - /* Fast mode speed calculate: Tlow/Thigh = 2 */ - result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3)); - } - else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/ - { - /* Fast mode speed calculate: Tlow/Thigh = 16/9 */ - result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25)); - /* Set DUTY bit */ - result |= I2C_DutyCycle_16_9; - } - - /* Test if CCR value is under 0x1*/ - if ((result & CCR_CCR_Set) == 0) - { - /* Set minimum allowed value */ - result |= (uint16_t)0x0001; - } - /* Set speed value and set F/S bit for fast mode */ - tmpreg |= (uint16_t)(result | CCR_FS_Set); - /* Set Maximum Rise Time for fast mode */ - I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1); - } - - /* Write to I2Cx CCR */ - I2Cx->CCR = tmpreg; - /* Enable the selected I2C peripheral */ - I2Cx->CR1 |= CR1_PE_Set; - -/*---------------------------- I2Cx CR1 Configuration ------------------------*/ - /* Get the I2Cx CR1 value */ - tmpreg = I2Cx->CR1; - /* Clear ACK, SMBTYPE and SMBUS bits */ - tmpreg &= CR1_CLEAR_Mask; - /* Configure I2Cx: mode and acknowledgement */ - /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */ - /* Set ACK bit according to I2C_Ack value */ - tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack); - /* Write to I2Cx CR1 */ - I2Cx->CR1 = tmpreg; - -/*---------------------------- I2Cx OAR1 Configuration -----------------------*/ - /* Set I2Cx Own Address1 and acknowledged address */ - I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1); -} - -/** - * @brief Fills each I2C_InitStruct member with its default value. - * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized. - * @retval None - */ -void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct) -{ -/*---------------- Reset I2C init structure parameters values ----------------*/ - /* initialize the I2C_ClockSpeed member */ - I2C_InitStruct->I2C_ClockSpeed = 5000; - /* Initialize the I2C_Mode member */ - I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; - /* Initialize the I2C_DutyCycle member */ - I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2; - /* Initialize the I2C_OwnAddress1 member */ - I2C_InitStruct->I2C_OwnAddress1 = 0; - /* Initialize the I2C_Ack member */ - I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; - /* Initialize the I2C_AcknowledgedAddress member */ - I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; -} - -/** - * @brief Enables or disables the specified I2C peripheral. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2Cx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C peripheral */ - I2Cx->CR1 |= CR1_PE_Set; - } - else - { - /* Disable the selected I2C peripheral */ - I2Cx->CR1 &= CR1_PE_Reset; - } -} - -/** - * @brief Enables or disables the specified I2C DMA requests. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C DMA transfer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C DMA requests */ - I2Cx->CR2 |= CR2_DMAEN_Set; - } - else - { - /* Disable the selected I2C DMA requests */ - I2Cx->CR2 &= CR2_DMAEN_Reset; - } -} - -/** - * @brief Specifies if the next DMA transfer will be the last one. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C DMA last transfer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Next DMA transfer is the last transfer */ - I2Cx->CR2 |= CR2_LAST_Set; - } - else - { - /* Next DMA transfer is not the last transfer */ - I2Cx->CR2 &= CR2_LAST_Reset; - } -} - -/** - * @brief Generates I2Cx communication START condition. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C START condition generation. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Generate a START condition */ - I2Cx->CR1 |= CR1_START_Set; - } - else - { - /* Disable the START condition generation */ - I2Cx->CR1 &= CR1_START_Reset; - } -} - -/** - * @brief Generates I2Cx communication STOP condition. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C STOP condition generation. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Generate a STOP condition */ - I2Cx->CR1 |= CR1_STOP_Set; - } - else - { - /* Disable the STOP condition generation */ - I2Cx->CR1 &= CR1_STOP_Reset; - } -} - -/** - * @brief Enables or disables the specified I2C acknowledge feature. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C Acknowledgement. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the acknowledgement */ - I2Cx->CR1 |= CR1_ACK_Set; - } - else - { - /* Disable the acknowledgement */ - I2Cx->CR1 &= CR1_ACK_Reset; - } -} - -/** - * @brief Configures the specified I2C own address2. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param Address: specifies the 7bit I2C own address2. - * @retval None. - */ -void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address) -{ - uint16_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Get the old register value */ - tmpreg = I2Cx->OAR2; - - /* Reset I2Cx Own address2 bit [7:1] */ - tmpreg &= OAR2_ADD2_Reset; - - /* Set I2Cx Own address2 */ - tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE); - - /* Store the new register value */ - I2Cx->OAR2 = tmpreg; -} - -/** - * @brief Enables or disables the specified I2C dual addressing mode. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C dual addressing mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable dual addressing mode */ - I2Cx->OAR2 |= OAR2_ENDUAL_Set; - } - else - { - /* Disable dual addressing mode */ - I2Cx->OAR2 &= OAR2_ENDUAL_Reset; - } -} - -/** - * @brief Enables or disables the specified I2C general call feature. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C General call. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable generall call */ - I2Cx->CR1 |= CR1_ENGC_Set; - } - else - { - /* Disable generall call */ - I2Cx->CR1 &= CR1_ENGC_Reset; - } -} - -/** - * @brief Enables or disables the specified I2C interrupts. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg I2C_IT_BUF: Buffer interrupt mask - * @arg I2C_IT_EVT: Event interrupt mask - * @arg I2C_IT_ERR: Error interrupt mask - * @param NewState: new state of the specified I2C interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_I2C_CONFIG_IT(I2C_IT)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C interrupts */ - I2Cx->CR2 |= I2C_IT; - } - else - { - /* Disable the selected I2C interrupts */ - I2Cx->CR2 &= (uint16_t)~I2C_IT; - } -} - -/** - * @brief Sends a data byte through the I2Cx peripheral. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param Data: Byte to be transmitted.. - * @retval None - */ -void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - /* Write in the DR register the data to be sent */ - I2Cx->DR = Data; -} - -/** - * @brief Returns the most recent received data by the I2Cx peripheral. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @retval The value of the received data. - */ -uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - /* Return the data in the DR register */ - return (uint8_t)I2Cx->DR; -} - -/** - * @brief Transmits the address byte to select the slave device. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param Address: specifies the slave address which will be transmitted - * @param I2C_Direction: specifies whether the I2C device will be a - * Transmitter or a Receiver. This parameter can be one of the following values - * @arg I2C_Direction_Transmitter: Transmitter mode - * @arg I2C_Direction_Receiver: Receiver mode - * @retval None. - */ -void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DIRECTION(I2C_Direction)); - /* Test on the direction to set/reset the read/write bit */ - if (I2C_Direction != I2C_Direction_Transmitter) - { - /* Set the address bit0 for read */ - Address |= OAR1_ADD0_Set; - } - else - { - /* Reset the address bit0 for write */ - Address &= OAR1_ADD0_Reset; - } - /* Send the address */ - I2Cx->DR = Address; -} - -/** - * @brief Reads the specified I2C register and returns its value. - * @param I2C_Register: specifies the register to read. - * This parameter can be one of the following values: - * @arg I2C_Register_CR1: CR1 register. - * @arg I2C_Register_CR2: CR2 register. - * @arg I2C_Register_OAR1: OAR1 register. - * @arg I2C_Register_OAR2: OAR2 register. - * @arg I2C_Register_DR: DR register. - * @arg I2C_Register_SR1: SR1 register. - * @arg I2C_Register_SR2: SR2 register. - * @arg I2C_Register_CCR: CCR register. - * @arg I2C_Register_TRISE: TRISE register. - * @retval The value of the read register. - */ -uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_REGISTER(I2C_Register)); - - tmp = (uint32_t) I2Cx; - tmp += I2C_Register; - - /* Return the selected register value */ - return (*(__IO uint16_t *) tmp); -} - -/** - * @brief Enables or disables the specified I2C software reset. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C software reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Peripheral under reset */ - I2Cx->CR1 |= CR1_SWRST_Set; - } - else - { - /* Peripheral not under reset */ - I2Cx->CR1 &= CR1_SWRST_Reset; - } -} - -/** - * @brief Selects the specified I2C NACK position in master receiver mode. - * This function is useful in I2C Master Receiver mode when the number - * of data to be received is equal to 2. In this case, this function - * should be called (with parameter I2C_NACKPosition_Next) before data - * reception starts,as described in the 2-byte reception procedure - * recommended in Reference Manual in Section: Master receiver. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_NACKPosition: specifies the NACK position. - * This parameter can be one of the following values: - * @arg I2C_NACKPosition_Next: indicates that the next byte will be the last - * received byte. - * @arg I2C_NACKPosition_Current: indicates that current byte is the last - * received byte. - * - * @note This function configures the same bit (POS) as I2C_PECPositionConfig() - * but is intended to be used in I2C mode while I2C_PECPositionConfig() - * is intended to used in SMBUS mode. - * - * @retval None - */ -void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition)); - - /* Check the input parameter */ - if (I2C_NACKPosition == I2C_NACKPosition_Next) - { - /* Next byte in shift register is the last received byte */ - I2Cx->CR1 |= I2C_NACKPosition_Next; - } - else - { - /* Current byte in shift register is the last received byte */ - I2Cx->CR1 &= I2C_NACKPosition_Current; - } -} - -/** - * @brief Drives the SMBusAlert pin high or low for the specified I2C. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_SMBusAlert: specifies SMBAlert pin level. - * This parameter can be one of the following values: - * @arg I2C_SMBusAlert_Low: SMBAlert pin driven low - * @arg I2C_SMBusAlert_High: SMBAlert pin driven high - * @retval None - */ -void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert)); - if (I2C_SMBusAlert == I2C_SMBusAlert_Low) - { - /* Drive the SMBusAlert pin Low */ - I2Cx->CR1 |= I2C_SMBusAlert_Low; - } - else - { - /* Drive the SMBusAlert pin High */ - I2Cx->CR1 &= I2C_SMBusAlert_High; - } -} - -/** - * @brief Enables or disables the specified I2C PEC transfer. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C PEC transmission. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C PEC transmission */ - I2Cx->CR1 |= CR1_PEC_Set; - } - else - { - /* Disable the selected I2C PEC transmission */ - I2Cx->CR1 &= CR1_PEC_Reset; - } -} - -/** - * @brief Selects the specified I2C PEC position. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_PECPosition: specifies the PEC position. - * This parameter can be one of the following values: - * @arg I2C_PECPosition_Next: indicates that the next byte is PEC - * @arg I2C_PECPosition_Current: indicates that current byte is PEC - * - * @note This function configures the same bit (POS) as I2C_NACKPositionConfig() - * but is intended to be used in SMBUS mode while I2C_NACKPositionConfig() - * is intended to used in I2C mode. - * - * @retval None - */ -void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition)); - if (I2C_PECPosition == I2C_PECPosition_Next) - { - /* Next byte in shift register is PEC */ - I2Cx->CR1 |= I2C_PECPosition_Next; - } - else - { - /* Current byte in shift register is PEC */ - I2Cx->CR1 &= I2C_PECPosition_Current; - } -} - -/** - * @brief Enables or disables the PEC value calculation of the transferred bytes. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2Cx PEC value calculation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C PEC calculation */ - I2Cx->CR1 |= CR1_ENPEC_Set; - } - else - { - /* Disable the selected I2C PEC calculation */ - I2Cx->CR1 &= CR1_ENPEC_Reset; - } -} - -/** - * @brief Returns the PEC value for the specified I2C. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @retval The PEC value. - */ -uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - /* Return the selected I2C PEC value */ - return ((I2Cx->SR2) >> 8); -} - -/** - * @brief Enables or disables the specified I2C ARP. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2Cx ARP. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C ARP */ - I2Cx->CR1 |= CR1_ENARP_Set; - } - else - { - /* Disable the selected I2C ARP */ - I2Cx->CR1 &= CR1_ENARP_Reset; - } -} - -/** - * @brief Enables or disables the specified I2C Clock stretching. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2Cx Clock stretching. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState == DISABLE) - { - /* Enable the selected I2C Clock stretching */ - I2Cx->CR1 |= CR1_NOSTRETCH_Set; - } - else - { - /* Disable the selected I2C Clock stretching */ - I2Cx->CR1 &= CR1_NOSTRETCH_Reset; - } -} - -/** - * @brief Selects the specified I2C fast mode duty cycle. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_DutyCycle: specifies the fast mode duty cycle. - * This parameter can be one of the following values: - * @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2 - * @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9 - * @retval None - */ -void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle)); - if (I2C_DutyCycle != I2C_DutyCycle_16_9) - { - /* I2C fast mode Tlow/Thigh=2 */ - I2Cx->CCR &= I2C_DutyCycle_2; - } - else - { - /* I2C fast mode Tlow/Thigh=16/9 */ - I2Cx->CCR |= I2C_DutyCycle_16_9; - } -} - - - -/** - * @brief - **************************************************************************************** - * - * I2C State Monitoring Functions - * - **************************************************************************************** - * This I2C driver provides three different ways for I2C state monitoring - * depending on the application requirements and constraints: - * - * - * 1) Basic state monitoring: - * Using I2C_CheckEvent() function: - * It compares the status registers (SR1 and SR2) content to a given event - * (can be the combination of one or more flags). - * It returns SUCCESS if the current status includes the given flags - * and returns ERROR if one or more flags are missing in the current status. - * - When to use: - * - This function is suitable for most applications as well as for startup - * activity since the events are fully described in the product reference manual - * (RM0008). - * - It is also suitable for users who need to define their own events. - * - Limitations: - * - If an error occurs (ie. error flags are set besides to the monitored flags), - * the I2C_CheckEvent() function may return SUCCESS despite the communication - * hold or corrupted real state. - * In this case, it is advised to use error interrupts to monitor the error - * events and handle them in the interrupt IRQ handler. - * - * @note - * For error management, it is advised to use the following functions: - * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). - * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. - * Where x is the peripheral instance (I2C1, I2C2 ...) - * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler() - * in order to determine which error occured. - * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() - * and/or I2C_GenerateStop() in order to clear the error flag and source, - * and return to correct communication status. - * - * - * 2) Advanced state monitoring: - * Using the function I2C_GetLastEvent() which returns the image of both status - * registers in a single word (uint32_t) (Status Register 2 value is shifted left - * by 16 bits and concatenated to Status Register 1). - * - When to use: - * - This function is suitable for the same applications above but it allows to - * overcome the mentioned limitation of I2C_GetFlagStatus() function. - * The returned value could be compared to events already defined in the - * library (stm32f10x_i2c.h) or to custom values defined by user. - * - This function is suitable when multiple flags are monitored at the same time. - * - At the opposite of I2C_CheckEvent() function, this function allows user to - * choose when an event is accepted (when all events flags are set and no - * other flags are set or just when the needed flags are set like - * I2C_CheckEvent() function). - * - Limitations: - * - User may need to define his own events. - * - Same remark concerning the error management is applicable for this - * function if user decides to check only regular communication flags (and - * ignores error flags). - * - * - * 3) Flag-based state monitoring: - * Using the function I2C_GetFlagStatus() which simply returns the status of - * one single flag (ie. I2C_FLAG_RXNE ...). - * - When to use: - * - This function could be used for specific applications or in debug phase. - * - It is suitable when only one flag checking is needed (most I2C events - * are monitored through multiple flags). - * - Limitations: - * - When calling this function, the Status register is accessed. Some flags are - * cleared when the status register is accessed. So checking the status - * of one Flag, may clear other ones. - * - Function may need to be called twice or more in order to monitor one - * single event. - * - * For detailed description of Events, please refer to section I2C_Events in - * stm32f10x_i2c.h file. - * - */ - -/** - * - * 1) Basic state monitoring - ******************************************************************************* - */ - -/** - * @brief Checks whether the last I2Cx Event is equal to the one passed - * as parameter. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_EVENT: specifies the event to be checked. - * This parameter can be one of the following values: - * @arg I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED : EV1 - * @arg I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED : EV1 - * @arg I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED : EV1 - * @arg I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED : EV1 - * @arg I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED : EV1 - * @arg I2C_EVENT_SLAVE_BYTE_RECEIVED : EV2 - * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF) : EV2 - * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL) : EV2 - * @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED : EV3 - * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF) : EV3 - * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL) : EV3 - * @arg I2C_EVENT_SLAVE_ACK_FAILURE : EV3_2 - * @arg I2C_EVENT_SLAVE_STOP_DETECTED : EV4 - * @arg I2C_EVENT_MASTER_MODE_SELECT : EV5 - * @arg I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED : EV6 - * @arg I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED : EV6 - * @arg I2C_EVENT_MASTER_BYTE_RECEIVED : EV7 - * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTING : EV8 - * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED : EV8_2 - * @arg I2C_EVENT_MASTER_MODE_ADDRESS10 : EV9 - * - * @note: For detailed description of Events, please refer to section - * I2C_Events in stm32f10x_i2c.h file. - * - * @retval An ErrorStatus enumeration value: - * - SUCCESS: Last event is equal to the I2C_EVENT - * - ERROR: Last event is different from the I2C_EVENT - */ -ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT) -{ - uint32_t lastevent = 0; - uint32_t flag1 = 0, flag2 = 0; - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_EVENT(I2C_EVENT)); - - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = flag2 << 16; - - /* Get the last event value from I2C status register */ - lastevent = (flag1 | flag2) & FLAG_Mask; - - /* Check whether the last event contains the I2C_EVENT */ - if ((lastevent & I2C_EVENT) == I2C_EVENT) - { - /* SUCCESS: last event is equal to I2C_EVENT */ - status = SUCCESS; - } - else - { - /* ERROR: last event is different from I2C_EVENT */ - status = ERROR; - } - /* Return status */ - return status; -} - -/** - * - * 2) Advanced state monitoring - ******************************************************************************* - */ - -/** - * @brief Returns the last I2Cx Event. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * - * @note: For detailed description of Events, please refer to section - * I2C_Events in stm32f10x_i2c.h file. - * - * @retval The last event - */ -uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx) -{ - uint32_t lastevent = 0; - uint32_t flag1 = 0, flag2 = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = flag2 << 16; - - /* Get the last event value from I2C status register */ - lastevent = (flag1 | flag2) & FLAG_Mask; - - /* Return status */ - return lastevent; -} - -/** - * - * 3) Flag-based state monitoring - ******************************************************************************* - */ - -/** - * @brief Checks whether the specified I2C flag is set or not. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2C_FLAG_DUALF: Dual flag (Slave mode) - * @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode) - * @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode) - * @arg I2C_FLAG_GENCALL: General call header flag (Slave mode) - * @arg I2C_FLAG_TRA: Transmitter/Receiver flag - * @arg I2C_FLAG_BUSY: Bus busy flag - * @arg I2C_FLAG_MSL: Master/Slave flag - * @arg I2C_FLAG_SMBALERT: SMBus Alert flag - * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_FLAG_PECERR: PEC error in reception flag - * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_FLAG_BERR: Bus error flag - * @arg I2C_FLAG_TXE: Data register empty flag (Transmitter) - * @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag - * @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode) - * @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode) - * @arg I2C_FLAG_BTF: Byte transfer finished flag - * @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL" - * Address matched flag (Slave mode)"ENDA" - * @arg I2C_FLAG_SB: Start bit flag (Master mode) - * @retval The new state of I2C_FLAG (SET or RESET). - */ -FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) -{ - FlagStatus bitstatus = RESET; - __IO uint32_t i2creg = 0, i2cxbase = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_GET_FLAG(I2C_FLAG)); - - /* Get the I2Cx peripheral base address */ - i2cxbase = (uint32_t)I2Cx; - - /* Read flag register index */ - i2creg = I2C_FLAG >> 28; - - /* Get bit[23:0] of the flag */ - I2C_FLAG &= FLAG_Mask; - - if(i2creg != 0) - { - /* Get the I2Cx SR1 register address */ - i2cxbase += 0x14; - } - else - { - /* Flag in I2Cx SR2 Register */ - I2C_FLAG = (uint32_t)(I2C_FLAG >> 16); - /* Get the I2Cx SR2 register address */ - i2cxbase += 0x18; - } - - if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET) - { - /* I2C_FLAG is set */ - bitstatus = SET; - } - else - { - /* I2C_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the I2C_FLAG status */ - return bitstatus; -} - - - -/** - * @brief Clears the I2Cx's pending flags. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg I2C_FLAG_SMBALERT: SMBus Alert flag - * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_FLAG_PECERR: PEC error in reception flag - * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_FLAG_BERR: Bus error flag - * - * @note - * - STOPF (STOP detection) is cleared by software sequence: a read operation - * to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation - * to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). - * - ADD10 (10-bit header sent) is cleared by software sequence: a read - * operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the - * second byte of the address in DR register. - * - BTF (Byte Transfer Finished) is cleared by software sequence: a read - * operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a - * read/write to I2C_DR register (I2C_SendData()). - * - ADDR (Address sent) is cleared by software sequence: a read operation to - * I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to - * I2C_SR2 register ((void)(I2Cx->SR2)). - * - SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1 - * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR - * register (I2C_SendData()). - * @retval None - */ -void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) -{ - uint32_t flagpos = 0; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); - /* Get the I2C flag position */ - flagpos = I2C_FLAG & FLAG_Mask; - /* Clear the selected I2C flag */ - I2Cx->SR1 = (uint16_t)~flagpos; -} - -/** - * @brief Checks whether the specified I2C interrupt has occurred or not. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_IT: specifies the interrupt source to check. - * This parameter can be one of the following values: - * @arg I2C_IT_SMBALERT: SMBus Alert flag - * @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_IT_PECERR: PEC error in reception flag - * @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_IT_AF: Acknowledge failure flag - * @arg I2C_IT_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_IT_BERR: Bus error flag - * @arg I2C_IT_TXE: Data register empty flag (Transmitter) - * @arg I2C_IT_RXNE: Data register not empty (Receiver) flag - * @arg I2C_IT_STOPF: Stop detection flag (Slave mode) - * @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode) - * @arg I2C_IT_BTF: Byte transfer finished flag - * @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL" - * Address matched flag (Slave mode)"ENDAD" - * @arg I2C_IT_SB: Start bit flag (Master mode) - * @retval The new state of I2C_IT (SET or RESET). - */ -ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT) -{ - ITStatus bitstatus = RESET; - uint32_t enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_GET_IT(I2C_IT)); - - /* Check if the interrupt source is enabled or not */ - enablestatus = (uint32_t)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CR2)) ; - - /* Get bit[23:0] of the flag */ - I2C_IT &= FLAG_Mask; - - /* Check the status of the specified I2C flag */ - if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus) - { - /* I2C_IT is set */ - bitstatus = SET; - } - else - { - /* I2C_IT is reset */ - bitstatus = RESET; - } - /* Return the I2C_IT status */ - return bitstatus; -} - -/** - * @brief Clears the I2Cx’s interrupt pending bits. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_IT: specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg I2C_IT_SMBALERT: SMBus Alert interrupt - * @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt - * @arg I2C_IT_PECERR: PEC error in reception interrupt - * @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode) - * @arg I2C_IT_AF: Acknowledge failure interrupt - * @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode) - * @arg I2C_IT_BERR: Bus error interrupt - * - * @note - * - STOPF (STOP detection) is cleared by software sequence: a read operation - * to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to - * I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). - * - ADD10 (10-bit header sent) is cleared by software sequence: a read - * operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second - * byte of the address in I2C_DR register. - * - BTF (Byte Transfer Finished) is cleared by software sequence: a read - * operation to I2C_SR1 register (I2C_GetITStatus()) followed by a - * read/write to I2C_DR register (I2C_SendData()). - * - ADDR (Address sent) is cleared by software sequence: a read operation to - * I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to - * I2C_SR2 register ((void)(I2Cx->SR2)). - * - SB (Start Bit) is cleared by software sequence: a read operation to - * I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to - * I2C_DR register (I2C_SendData()). - * @retval None - */ -void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT) -{ - uint32_t flagpos = 0; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLEAR_IT(I2C_IT)); - /* Get the I2C flag position */ - flagpos = I2C_IT & FLAG_Mask; - /* Clear the selected I2C flag */ - I2Cx->SR1 = (uint16_t)~flagpos; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c deleted file mode 100644 index c7cbf7e..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c +++ /dev/null @@ -1,190 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_iwdg.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the IWDG firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_iwdg.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup IWDG - * @brief IWDG driver modules - * @{ - */ - -/** @defgroup IWDG_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup IWDG_Private_Defines - * @{ - */ - -/* ---------------------- IWDG registers bit mask ----------------------------*/ - -/* KR register bit mask */ -#define KR_KEY_Reload ((uint16_t)0xAAAA) -#define KR_KEY_Enable ((uint16_t)0xCCCC) - -/** - * @} - */ - -/** @defgroup IWDG_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup IWDG_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup IWDG_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup IWDG_Private_Functions - * @{ - */ - -/** - * @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers. - * @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers. - * This parameter can be one of the following values: - * @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers - * @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers - * @retval None - */ -void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess) -{ - /* Check the parameters */ - assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess)); - IWDG->KR = IWDG_WriteAccess; -} - -/** - * @brief Sets IWDG Prescaler value. - * @param IWDG_Prescaler: specifies the IWDG Prescaler value. - * This parameter can be one of the following values: - * @arg IWDG_Prescaler_4: IWDG prescaler set to 4 - * @arg IWDG_Prescaler_8: IWDG prescaler set to 8 - * @arg IWDG_Prescaler_16: IWDG prescaler set to 16 - * @arg IWDG_Prescaler_32: IWDG prescaler set to 32 - * @arg IWDG_Prescaler_64: IWDG prescaler set to 64 - * @arg IWDG_Prescaler_128: IWDG prescaler set to 128 - * @arg IWDG_Prescaler_256: IWDG prescaler set to 256 - * @retval None - */ -void IWDG_SetPrescaler(uint8_t IWDG_Prescaler) -{ - /* Check the parameters */ - assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler)); - IWDG->PR = IWDG_Prescaler; -} - -/** - * @brief Sets IWDG Reload value. - * @param Reload: specifies the IWDG Reload value. - * This parameter must be a number between 0 and 0x0FFF. - * @retval None - */ -void IWDG_SetReload(uint16_t Reload) -{ - /* Check the parameters */ - assert_param(IS_IWDG_RELOAD(Reload)); - IWDG->RLR = Reload; -} - -/** - * @brief Reloads IWDG counter with value defined in the reload register - * (write access to IWDG_PR and IWDG_RLR registers disabled). - * @param None - * @retval None - */ -void IWDG_ReloadCounter(void) -{ - IWDG->KR = KR_KEY_Reload; -} - -/** - * @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled). - * @param None - * @retval None - */ -void IWDG_Enable(void) -{ - IWDG->KR = KR_KEY_Enable; -} - -/** - * @brief Checks whether the specified IWDG flag is set or not. - * @param IWDG_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg IWDG_FLAG_PVU: Prescaler Value Update on going - * @arg IWDG_FLAG_RVU: Reload Value Update on going - * @retval The new state of IWDG_FLAG (SET or RESET). - */ -FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_IWDG_FLAG(IWDG_FLAG)); - if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the flag status */ - return bitstatus; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c deleted file mode 100644 index a5a5c57..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c +++ /dev/null @@ -1,307 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_pwr.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the PWR firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_pwr.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup PWR - * @brief PWR driver modules - * @{ - */ - -/** @defgroup PWR_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup PWR_Private_Defines - * @{ - */ - -/* --------- PWR registers bit address in the alias region ---------- */ -#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ - -/* Alias word address of DBP bit */ -#define CR_OFFSET (PWR_OFFSET + 0x00) -#define DBP_BitNumber 0x08 -#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4)) - -/* Alias word address of PVDE bit */ -#define PVDE_BitNumber 0x04 -#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4)) - -/* --- CSR Register ---*/ - -/* Alias word address of EWUP bit */ -#define CSR_OFFSET (PWR_OFFSET + 0x04) -#define EWUP_BitNumber 0x08 -#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4)) - -/* ------------------ PWR registers bit mask ------------------------ */ - -/* CR register bit mask */ -#define CR_DS_MASK ((uint32_t)0xFFFFFFFC) -#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F) - - -/** - * @} - */ - -/** @defgroup PWR_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup PWR_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup PWR_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup PWR_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the PWR peripheral registers to their default reset values. - * @param None - * @retval None - */ -void PWR_DeInit(void) -{ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); -} - -/** - * @brief Enables or disables access to the RTC and backup registers. - * @param NewState: new state of the access to the RTC and backup registers. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_BackupAccessCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the Power Voltage Detector(PVD). - * @param NewState: new state of the PVD. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_PVDCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). - * @param PWR_PVDLevel: specifies the PVD detection level - * This parameter can be one of the following values: - * @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V - * @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V - * @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V - * @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V - * @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V - * @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V - * @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V - * @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V - * @retval None - */ -void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel)); - tmpreg = PWR->CR; - /* Clear PLS[7:5] bits */ - tmpreg &= CR_PLS_MASK; - /* Set PLS[7:5] bits according to PWR_PVDLevel value */ - tmpreg |= PWR_PVDLevel; - /* Store the new value */ - PWR->CR = tmpreg; -} - -/** - * @brief Enables or disables the WakeUp Pin functionality. - * @param NewState: new state of the WakeUp Pin functionality. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_WakeUpPinCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState; -} - -/** - * @brief Enters STOP mode. - * @param PWR_Regulator: specifies the regulator state in STOP mode. - * This parameter can be one of the following values: - * @arg PWR_Regulator_ON: STOP mode with regulator ON - * @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode - * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction - * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction - * @retval None - */ -void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(PWR_Regulator)); - assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); - - /* Select the regulator state in STOP mode ---------------------------------*/ - tmpreg = PWR->CR; - /* Clear PDDS and LPDS bits */ - tmpreg &= CR_DS_MASK; - /* Set LPDS bit according to PWR_Regulator value */ - tmpreg |= PWR_Regulator; - /* Store the new value */ - PWR->CR = tmpreg; - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP; - - /* Select STOP mode entry --------------------------------------------------*/ - if(PWR_STOPEntry == PWR_STOPEntry_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __WFE(); - } - - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP); -} - -/** - * @brief Enters STANDBY mode. - * @param None - * @retval None - */ -void PWR_EnterSTANDBYMode(void) -{ - /* Clear Wake-up flag */ - PWR->CR |= PWR_CR_CWUF; - /* Select STANDBY mode */ - PWR->CR |= PWR_CR_PDDS; - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP; -/* This option is used to ensure that store operations are completed */ -#if defined ( __CC_ARM ) - __force_stores(); -#endif - /* Request Wait For Interrupt */ - __WFI(); -} - -/** - * @brief Checks whether the specified PWR flag is set or not. - * @param PWR_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag - * @arg PWR_FLAG_SB: StandBy flag - * @arg PWR_FLAG_PVDO: PVD Output - * @retval The new state of PWR_FLAG (SET or RESET). - */ -FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_PWR_GET_FLAG(PWR_FLAG)); - - if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the flag status */ - return bitstatus; -} - -/** - * @brief Clears the PWR's pending flags. - * @param PWR_FLAG: specifies the flag to clear. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag - * @arg PWR_FLAG_SB: StandBy flag - * @retval None - */ -void PWR_ClearFlag(uint32_t PWR_FLAG) -{ - /* Check the parameters */ - assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG)); - - PWR->CR |= PWR_FLAG << 2; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c deleted file mode 100644 index a29034b..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c +++ /dev/null @@ -1,1470 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_rcc.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the RCC firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup RCC - * @brief RCC driver modules - * @{ - */ - -/** @defgroup RCC_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup RCC_Private_Defines - * @{ - */ - -/* ------------ RCC registers bit address in the alias region ----------- */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ - -/* Alias word address of HSION bit */ -#define CR_OFFSET (RCC_OFFSET + 0x00) -#define HSION_BitNumber 0x00 -#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) - -/* Alias word address of PLLON bit */ -#define PLLON_BitNumber 0x18 -#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) - -#ifdef STM32F10X_CL - /* Alias word address of PLL2ON bit */ - #define PLL2ON_BitNumber 0x1A - #define CR_PLL2ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4)) - - /* Alias word address of PLL3ON bit */ - #define PLL3ON_BitNumber 0x1C - #define CR_PLL3ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4)) -#endif /* STM32F10X_CL */ - -/* Alias word address of CSSON bit */ -#define CSSON_BitNumber 0x13 -#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) - -/* --- CFGR Register ---*/ - -/* Alias word address of USBPRE bit */ -#define CFGR_OFFSET (RCC_OFFSET + 0x04) - -#ifndef STM32F10X_CL - #define USBPRE_BitNumber 0x16 - #define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4)) -#else - #define OTGFSPRE_BitNumber 0x16 - #define CFGR_OTGFSPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4)) -#endif /* STM32F10X_CL */ - -/* --- BDCR Register ---*/ - -/* Alias word address of RTCEN bit */ -#define BDCR_OFFSET (RCC_OFFSET + 0x20) -#define RTCEN_BitNumber 0x0F -#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) - -/* Alias word address of BDRST bit */ -#define BDRST_BitNumber 0x10 -#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) - -/* --- CSR Register ---*/ - -/* Alias word address of LSION bit */ -#define CSR_OFFSET (RCC_OFFSET + 0x24) -#define LSION_BitNumber 0x00 -#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) - -#ifdef STM32F10X_CL -/* --- CFGR2 Register ---*/ - - /* Alias word address of I2S2SRC bit */ - #define CFGR2_OFFSET (RCC_OFFSET + 0x2C) - #define I2S2SRC_BitNumber 0x11 - #define CFGR2_I2S2SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4)) - - /* Alias word address of I2S3SRC bit */ - #define I2S3SRC_BitNumber 0x12 - #define CFGR2_I2S3SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4)) -#endif /* STM32F10X_CL */ - -/* ---------------------- RCC registers bit mask ------------------------ */ - -/* CR register bit mask */ -#define CR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF) -#define CR_HSEBYP_Set ((uint32_t)0x00040000) -#define CR_HSEON_Reset ((uint32_t)0xFFFEFFFF) -#define CR_HSEON_Set ((uint32_t)0x00010000) -#define CR_HSITRIM_Mask ((uint32_t)0xFFFFFF07) - -/* CFGR register bit mask */ -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) - #define CFGR_PLL_Mask ((uint32_t)0xFFC2FFFF) -#else - #define CFGR_PLL_Mask ((uint32_t)0xFFC0FFFF) -#endif /* STM32F10X_CL */ - -#define CFGR_PLLMull_Mask ((uint32_t)0x003C0000) -#define CFGR_PLLSRC_Mask ((uint32_t)0x00010000) -#define CFGR_PLLXTPRE_Mask ((uint32_t)0x00020000) -#define CFGR_SWS_Mask ((uint32_t)0x0000000C) -#define CFGR_SW_Mask ((uint32_t)0xFFFFFFFC) -#define CFGR_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F) -#define CFGR_HPRE_Set_Mask ((uint32_t)0x000000F0) -#define CFGR_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF) -#define CFGR_PPRE1_Set_Mask ((uint32_t)0x00000700) -#define CFGR_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF) -#define CFGR_PPRE2_Set_Mask ((uint32_t)0x00003800) -#define CFGR_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF) -#define CFGR_ADCPRE_Set_Mask ((uint32_t)0x0000C000) - -/* CSR register bit mask */ -#define CSR_RMVF_Set ((uint32_t)0x01000000) - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) -/* CFGR2 register bit mask */ - #define CFGR2_PREDIV1SRC ((uint32_t)0x00010000) - #define CFGR2_PREDIV1 ((uint32_t)0x0000000F) -#endif -#ifdef STM32F10X_CL - #define CFGR2_PREDIV2 ((uint32_t)0x000000F0) - #define CFGR2_PLL2MUL ((uint32_t)0x00000F00) - #define CFGR2_PLL3MUL ((uint32_t)0x0000F000) -#endif /* STM32F10X_CL */ - -/* RCC Flag Mask */ -#define FLAG_Mask ((uint8_t)0x1F) - -/* CIR register byte 2 (Bits[15:8]) base address */ -#define CIR_BYTE2_ADDRESS ((uint32_t)0x40021009) - -/* CIR register byte 3 (Bits[23:16]) base address */ -#define CIR_BYTE3_ADDRESS ((uint32_t)0x4002100A) - -/* CFGR register byte 4 (Bits[31:24]) base address */ -#define CFGR_BYTE4_ADDRESS ((uint32_t)0x40021007) - -/* BDCR register base address */ -#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) - -/** - * @} - */ - -/** @defgroup RCC_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup RCC_Private_Variables - * @{ - */ - -static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; -static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8}; - -/** - * @} - */ - -/** @defgroup RCC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup RCC_Private_Functions - * @{ - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @param None - * @retval None - */ -void RCC_DeInit(void) -{ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#ifndef STM32F10X_CL - RCC->CFGR &= (uint32_t)0xF8FF0000; -#else - RCC->CFGR &= (uint32_t)0xF0FF0000; -#endif /* STM32F10X_CL */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= (uint32_t)0xFF80FFFF; - -#ifdef STM32F10X_CL - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= (uint32_t)0xEBFFFFFF; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#else - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; -#endif /* STM32F10X_CL */ - -} - -/** - * @brief Configures the External High Speed oscillator (HSE). - * @note HSE can not be stopped if it is used directly or through the PLL as system clock. - * @param RCC_HSE: specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg RCC_HSE_OFF: HSE oscillator OFF - * @arg RCC_HSE_ON: HSE oscillator ON - * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock - * @retval None - */ -void RCC_HSEConfig(uint32_t RCC_HSE) -{ - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_HSE)); - /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ - /* Reset HSEON bit */ - RCC->CR &= CR_HSEON_Reset; - /* Reset HSEBYP bit */ - RCC->CR &= CR_HSEBYP_Reset; - /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */ - switch(RCC_HSE) - { - case RCC_HSE_ON: - /* Set HSEON bit */ - RCC->CR |= CR_HSEON_Set; - break; - - case RCC_HSE_Bypass: - /* Set HSEBYP and HSEON bits */ - RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set; - break; - - default: - break; - } -} - -/** - * @brief Waits for HSE start-up. - * @param None - * @retval An ErrorStatus enumuration value: - * - SUCCESS: HSE oscillator is stable and ready to use - * - ERROR: HSE oscillator not yet ready - */ -ErrorStatus RCC_WaitForHSEStartUp(void) -{ - __IO uint32_t StartUpCounter = 0; - ErrorStatus status = ERROR; - FlagStatus HSEStatus = RESET; - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); - StartUpCounter++; - } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET)); - - if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) - { - status = SUCCESS; - } - else - { - status = ERROR; - } - return (status); -} - -/** - * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. - * @param HSICalibrationValue: specifies the calibration trimming value. - * This parameter must be a number between 0 and 0x1F. - * @retval None - */ -void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); - tmpreg = RCC->CR; - /* Clear HSITRIM[4:0] bits */ - tmpreg &= CR_HSITRIM_Mask; - /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ - tmpreg |= (uint32_t)HSICalibrationValue << 3; - /* Store the new value */ - RCC->CR = tmpreg; -} - -/** - * @brief Enables or disables the Internal High Speed oscillator (HSI). - * @note HSI can not be stopped if it is used directly or through the PLL as system clock. - * @param NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_HSICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the PLL clock source and multiplication factor. - * @note This function must be used only when the PLL is disabled. - * @param RCC_PLLSource: specifies the PLL entry clock source. - * For @b STM32_Connectivity_line_devices or @b STM32_Value_line_devices, - * this parameter can be one of the following values: - * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry - * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry - * For @b other_STM32_devices, this parameter can be one of the following values: - * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry - * @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry - * @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry - * @param RCC_PLLMul: specifies the PLL multiplication factor. - * For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5} - * For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16] - * @retval None - */ -void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); - assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); - - tmpreg = RCC->CFGR; - /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ - tmpreg &= CFGR_PLL_Mask; - /* Set the PLL configuration bits */ - tmpreg |= RCC_PLLSource | RCC_PLLMul; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Enables or disables the PLL. - * @note The PLL can not be disabled if it is used as system clock. - * @param NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_PLLCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState; -} - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) -/** - * @brief Configures the PREDIV1 division factor. - * @note - * - This function must be used only when the PLL is disabled. - * - This function applies only to STM32 Connectivity line and Value line - * devices. - * @param RCC_PREDIV1_Source: specifies the PREDIV1 clock source. - * This parameter can be one of the following values: - * @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock - * @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock - * @note - * For @b STM32_Value_line_devices this parameter is always RCC_PREDIV1_Source_HSE - * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor. - * This parameter can be RCC_PREDIV1_Divx where x:[1,16] - * @retval None - */ -void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source)); - assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div)); - - tmpreg = RCC->CFGR2; - /* Clear PREDIV1[3:0] and PREDIV1SRC bits */ - tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC); - /* Set the PREDIV1 clock source and division factor */ - tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ; - /* Store the new value */ - RCC->CFGR2 = tmpreg; -} -#endif - -#ifdef STM32F10X_CL -/** - * @brief Configures the PREDIV2 division factor. - * @note - * - This function must be used only when both PLL2 and PLL3 are disabled. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor. - * This parameter can be RCC_PREDIV2_Divx where x:[1,16] - * @retval None - */ -void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div)); - - tmpreg = RCC->CFGR2; - /* Clear PREDIV2[3:0] bits */ - tmpreg &= ~CFGR2_PREDIV2; - /* Set the PREDIV2 division factor */ - tmpreg |= RCC_PREDIV2_Div; - /* Store the new value */ - RCC->CFGR2 = tmpreg; -} - -/** - * @brief Configures the PLL2 multiplication factor. - * @note - * - This function must be used only when the PLL2 is disabled. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_PLL2Mul: specifies the PLL2 multiplication factor. - * This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20} - * @retval None - */ -void RCC_PLL2Config(uint32_t RCC_PLL2Mul) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul)); - - tmpreg = RCC->CFGR2; - /* Clear PLL2Mul[3:0] bits */ - tmpreg &= ~CFGR2_PLL2MUL; - /* Set the PLL2 configuration bits */ - tmpreg |= RCC_PLL2Mul; - /* Store the new value */ - RCC->CFGR2 = tmpreg; -} - - -/** - * @brief Enables or disables the PLL2. - * @note - * - The PLL2 can not be disabled if it is used indirectly as system clock - * (i.e. it is used as PLL clock entry that is used as System clock). - * - This function applies only to STM32 Connectivity line devices. - * @param NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_PLL2Cmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState; -} - - -/** - * @brief Configures the PLL3 multiplication factor. - * @note - * - This function must be used only when the PLL3 is disabled. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_PLL3Mul: specifies the PLL3 multiplication factor. - * This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20} - * @retval None - */ -void RCC_PLL3Config(uint32_t RCC_PLL3Mul) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul)); - - tmpreg = RCC->CFGR2; - /* Clear PLL3Mul[3:0] bits */ - tmpreg &= ~CFGR2_PLL3MUL; - /* Set the PLL3 configuration bits */ - tmpreg |= RCC_PLL3Mul; - /* Store the new value */ - RCC->CFGR2 = tmpreg; -} - - -/** - * @brief Enables or disables the PLL3. - * @note This function applies only to STM32 Connectivity line devices. - * @param NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_PLL3Cmd(FunctionalState NewState) -{ - /* Check the parameters */ - - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState; -} -#endif /* STM32F10X_CL */ - -/** - * @brief Configures the system clock (SYSCLK). - * @param RCC_SYSCLKSource: specifies the clock source used as system clock. - * This parameter can be one of the following values: - * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock - * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock - * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock - * @retval None - */ -void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); - tmpreg = RCC->CFGR; - /* Clear SW[1:0] bits */ - tmpreg &= CFGR_SW_Mask; - /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ - tmpreg |= RCC_SYSCLKSource; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Returns the clock source used as system clock. - * @param None - * @retval The clock source used as system clock. The returned value can - * be one of the following: - * - 0x00: HSI used as system clock - * - 0x04: HSE used as system clock - * - 0x08: PLL used as system clock - */ -uint8_t RCC_GetSYSCLKSource(void) -{ - return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask)); -} - -/** - * @brief Configures the AHB clock (HCLK). - * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from - * the system clock (SYSCLK). - * This parameter can be one of the following values: - * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK - * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 - * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 - * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 - * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 - * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 - * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 - * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 - * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 - * @retval None - */ -void RCC_HCLKConfig(uint32_t RCC_SYSCLK) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_HCLK(RCC_SYSCLK)); - tmpreg = RCC->CFGR; - /* Clear HPRE[3:0] bits */ - tmpreg &= CFGR_HPRE_Reset_Mask; - /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ - tmpreg |= RCC_SYSCLK; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Configures the Low Speed APB clock (PCLK1). - * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from - * the AHB clock (HCLK). - * This parameter can be one of the following values: - * @arg RCC_HCLK_Div1: APB1 clock = HCLK - * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2 - * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4 - * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8 - * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16 - * @retval None - */ -void RCC_PCLK1Config(uint32_t RCC_HCLK) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_PCLK(RCC_HCLK)); - tmpreg = RCC->CFGR; - /* Clear PPRE1[2:0] bits */ - tmpreg &= CFGR_PPRE1_Reset_Mask; - /* Set PPRE1[2:0] bits according to RCC_HCLK value */ - tmpreg |= RCC_HCLK; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Configures the High Speed APB clock (PCLK2). - * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from - * the AHB clock (HCLK). - * This parameter can be one of the following values: - * @arg RCC_HCLK_Div1: APB2 clock = HCLK - * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2 - * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4 - * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8 - * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16 - * @retval None - */ -void RCC_PCLK2Config(uint32_t RCC_HCLK) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_PCLK(RCC_HCLK)); - tmpreg = RCC->CFGR; - /* Clear PPRE2[2:0] bits */ - tmpreg &= CFGR_PPRE2_Reset_Mask; - /* Set PPRE2[2:0] bits according to RCC_HCLK value */ - tmpreg |= RCC_HCLK << 3; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Enables or disables the specified RCC interrupts. - * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled. - * - * For @b STM32_Connectivity_line_devices, this parameter can be any combination - * of the following values - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt - * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt - * - * For @b other_STM32_devices, this parameter can be any combination of the - * following values - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * - * @param NewState: new state of the specified RCC interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_IT(RCC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */ - *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT; - } - else - { - /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */ - *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT; - } -} - -#ifndef STM32F10X_CL -/** - * @brief Configures the USB clock (USBCLK). - * @param RCC_USBCLKSource: specifies the USB clock source. This clock is - * derived from the PLL output. - * This parameter can be one of the following values: - * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB - * clock source - * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source - * @retval None - */ -void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource)); - - *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource; -} -#else -/** - * @brief Configures the USB OTG FS clock (OTGFSCLK). - * This function applies only to STM32 Connectivity line devices. - * @param RCC_OTGFSCLKSource: specifies the USB OTG FS clock source. - * This clock is derived from the PLL output. - * This parameter can be one of the following values: - * @arg RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source - * @arg RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source - * @retval None - */ -void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource)); - - *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource; -} -#endif /* STM32F10X_CL */ - -/** - * @brief Configures the ADC clock (ADCCLK). - * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from - * the APB2 clock (PCLK2). - * This parameter can be one of the following values: - * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2 - * @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4 - * @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6 - * @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8 - * @retval None - */ -void RCC_ADCCLKConfig(uint32_t RCC_PCLK2) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_ADCCLK(RCC_PCLK2)); - tmpreg = RCC->CFGR; - /* Clear ADCPRE[1:0] bits */ - tmpreg &= CFGR_ADCPRE_Reset_Mask; - /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */ - tmpreg |= RCC_PCLK2; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -#ifdef STM32F10X_CL -/** - * @brief Configures the I2S2 clock source(I2S2CLK). - * @note - * - This function must be called before enabling I2S2 APB clock. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_I2S2CLKSource: specifies the I2S2 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry - * @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry - * @retval None - */ -void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource)); - - *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource; -} - -/** - * @brief Configures the I2S3 clock source(I2S2CLK). - * @note - * - This function must be called before enabling I2S3 APB clock. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_I2S3CLKSource: specifies the I2S3 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry - * @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry - * @retval None - */ -void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource)); - - *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource; -} -#endif /* STM32F10X_CL */ - -/** - * @brief Configures the External Low Speed oscillator (LSE). - * @param RCC_LSE: specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg RCC_LSE_OFF: LSE oscillator OFF - * @arg RCC_LSE_ON: LSE oscillator ON - * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock - * @retval None - */ -void RCC_LSEConfig(uint8_t RCC_LSE) -{ - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_LSE)); - /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ - /* Reset LSEON bit */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; - /* Reset LSEBYP bit */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; - /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ - switch(RCC_LSE) - { - case RCC_LSE_ON: - /* Set LSEON bit */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON; - break; - - case RCC_LSE_Bypass: - /* Set LSEBYP and LSEON bits */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; - break; - - default: - break; - } -} - -/** - * @brief Enables or disables the Internal Low Speed oscillator (LSI). - * @note LSI can not be disabled if the IWDG is running. - * @param NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_LSICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the RTC clock (RTCCLK). - * @note Once the RTC clock is selected it can't be changed unless the Backup domain is reset. - * @param RCC_RTCCLKSource: specifies the RTC clock source. - * This parameter can be one of the following values: - * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock - * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock - * @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock - * @retval None - */ -void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); - /* Select the RTC clock source */ - RCC->BDCR |= RCC_RTCCLKSource; -} - -/** - * @brief Enables or disables the RTC clock. - * @note This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function. - * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_RTCCLKCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState; -} - -/** - * @brief Returns the frequencies of different on chip clocks. - * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold - * the clocks frequencies. - * @note The result of this function could be not correct when using - * fractional value for HSE crystal. - * @retval None - */ -void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) -{ - uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0; - -#ifdef STM32F10X_CL - uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - uint32_t prediv1factor = 0; -#endif - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & CFGR_SWS_Mask; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock */ - RCC_Clocks->SYSCLK_Frequency = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock */ - - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & CFGR_PLLMull_Mask; - pllsource = RCC->CFGR & CFGR_PLLSRC_Mask; - -#ifndef STM32F10X_CL - pllmull = ( pllmull >> 18) + 2; - - if (pllsource == 0x00) - {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ - RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; - } - else - { - #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; - /* HSE oscillator clock selected as PREDIV1 clock entry */ - RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; - #else - /* HSE selected as PLL clock entry */ - if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET) - {/* HSE oscillator clock divided by 2 */ - RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull; - } - else - { - RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull; - } - #endif - } -#else - pllmull = pllmull >> 18; - - if (pllmull != 0x0D) - { - pllmull += 2; - } - else - { /* PLL multiplication factor = PLL input clock * 6.5 */ - pllmull = 13 / 2; - } - - if (pllsource == 0x00) - {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ - RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; - } - else - {/* PREDIV1 selected as PLL clock entry */ - - /* Get PREDIV1 clock source and division factor */ - prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC; - prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; - - if (prediv1source == 0) - { /* HSE oscillator clock selected as PREDIV1 clock entry */ - RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; - } - else - {/* PLL2 clock selected as PREDIV1 clock entry */ - - /* Get PREDIV2 division factor and PLL2 multiplication factor */ - prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1; - pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2; - RCC_Clocks->SYSCLK_Frequency = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; - } - } -#endif /* STM32F10X_CL */ - break; - - default: - RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; - break; - } - - /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/ - /* Get HCLK prescaler */ - tmp = RCC->CFGR & CFGR_HPRE_Set_Mask; - tmp = tmp >> 4; - presc = APBAHBPrescTable[tmp]; - /* HCLK clock frequency */ - RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; - /* Get PCLK1 prescaler */ - tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask; - tmp = tmp >> 8; - presc = APBAHBPrescTable[tmp]; - /* PCLK1 clock frequency */ - RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; - /* Get PCLK2 prescaler */ - tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask; - tmp = tmp >> 11; - presc = APBAHBPrescTable[tmp]; - /* PCLK2 clock frequency */ - RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; - /* Get ADCCLK prescaler */ - tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask; - tmp = tmp >> 14; - presc = ADCPrescTable[tmp]; - /* ADCCLK clock frequency */ - RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc; -} - -/** - * @brief Enables or disables the AHB peripheral clock. - * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. - * - * For @b STM32_Connectivity_line_devices, this parameter can be any combination - * of the following values: - * @arg RCC_AHBPeriph_DMA1 - * @arg RCC_AHBPeriph_DMA2 - * @arg RCC_AHBPeriph_SRAM - * @arg RCC_AHBPeriph_FLITF - * @arg RCC_AHBPeriph_CRC - * @arg RCC_AHBPeriph_OTG_FS - * @arg RCC_AHBPeriph_ETH_MAC - * @arg RCC_AHBPeriph_ETH_MAC_Tx - * @arg RCC_AHBPeriph_ETH_MAC_Rx - * - * For @b other_STM32_devices, this parameter can be any combination of the - * following values: - * @arg RCC_AHBPeriph_DMA1 - * @arg RCC_AHBPeriph_DMA2 - * @arg RCC_AHBPeriph_SRAM - * @arg RCC_AHBPeriph_FLITF - * @arg RCC_AHBPeriph_CRC - * @arg RCC_AHBPeriph_FSMC - * @arg RCC_AHBPeriph_SDIO - * - * @note SRAM and FLITF clock can be disabled only during sleep mode. - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHBENR |= RCC_AHBPeriph; - } - else - { - RCC->AHBENR &= ~RCC_AHBPeriph; - } -} - -/** - * @brief Enables or disables the High Speed APB (APB2) peripheral clock. - * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, - * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, - * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, - * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, - * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, - * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, - * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB2ENR |= RCC_APB2Periph; - } - else - { - RCC->APB2ENR &= ~RCC_APB2Periph; - } -} - -/** - * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. - * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, - * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, - * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, - * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, - * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, - * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, - * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, - * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB1ENR |= RCC_APB1Periph; - } - else - { - RCC->APB1ENR &= ~RCC_APB1Periph; - } -} - -#ifdef STM32F10X_CL -/** - * @brief Forces or releases AHB peripheral reset. - * @note This function applies only to STM32 Connectivity line devices. - * @param RCC_AHBPeriph: specifies the AHB peripheral to reset. - * This parameter can be any combination of the following values: - * @arg RCC_AHBPeriph_OTG_FS - * @arg RCC_AHBPeriph_ETH_MAC - * @param NewState: new state of the specified peripheral reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHBRSTR |= RCC_AHBPeriph; - } - else - { - RCC->AHBRSTR &= ~RCC_AHBPeriph; - } -} -#endif /* STM32F10X_CL */ - -/** - * @brief Forces or releases High Speed APB (APB2) peripheral reset. - * @param RCC_APB2Periph: specifies the APB2 peripheral to reset. - * This parameter can be any combination of the following values: - * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, - * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, - * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, - * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, - * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, - * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, - * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 - * @param NewState: new state of the specified peripheral reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB2RSTR |= RCC_APB2Periph; - } - else - { - RCC->APB2RSTR &= ~RCC_APB2Periph; - } -} - -/** - * @brief Forces or releases Low Speed APB (APB1) peripheral reset. - * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. - * This parameter can be any combination of the following values: - * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, - * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, - * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, - * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, - * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, - * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, - * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, - * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB1RSTR |= RCC_APB1Periph; - } - else - { - RCC->APB1RSTR &= ~RCC_APB1Periph; - } -} - -/** - * @brief Forces or releases the Backup domain reset. - * @param NewState: new state of the Backup domain reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_BackupResetCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the Clock Security System. - * @param NewState: new state of the Clock Security System.. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_ClockSecuritySystemCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState; -} - -/** - * @brief Selects the clock source to output on MCO pin. - * @param RCC_MCO: specifies the clock source to output. - * - * For @b STM32_Connectivity_line_devices, this parameter can be one of the - * following values: - * @arg RCC_MCO_NoClock: No clock selected - * @arg RCC_MCO_SYSCLK: System clock selected - * @arg RCC_MCO_HSI: HSI oscillator clock selected - * @arg RCC_MCO_HSE: HSE oscillator clock selected - * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected - * @arg RCC_MCO_PLL2CLK: PLL2 clock selected - * @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected - * @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected - * @arg RCC_MCO_PLL3CLK: PLL3 clock selected - * - * For @b other_STM32_devices, this parameter can be one of the following values: - * @arg RCC_MCO_NoClock: No clock selected - * @arg RCC_MCO_SYSCLK: System clock selected - * @arg RCC_MCO_HSI: HSI oscillator clock selected - * @arg RCC_MCO_HSE: HSE oscillator clock selected - * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected - * - * @retval None - */ -void RCC_MCOConfig(uint8_t RCC_MCO) -{ - /* Check the parameters */ - assert_param(IS_RCC_MCO(RCC_MCO)); - - /* Perform Byte access to MCO bits to select the MCO source */ - *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO; -} - -/** - * @brief Checks whether the specified RCC flag is set or not. - * @param RCC_FLAG: specifies the flag to check. - * - * For @b STM32_Connectivity_line_devices, this parameter can be one of the - * following values: - * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready - * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready - * @arg RCC_FLAG_PLLRDY: PLL clock ready - * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready - * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready - * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready - * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready - * @arg RCC_FLAG_PINRST: Pin reset - * @arg RCC_FLAG_PORRST: POR/PDR reset - * @arg RCC_FLAG_SFTRST: Software reset - * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset - * @arg RCC_FLAG_WWDGRST: Window Watchdog reset - * @arg RCC_FLAG_LPWRRST: Low Power reset - * - * For @b other_STM32_devices, this parameter can be one of the following values: - * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready - * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready - * @arg RCC_FLAG_PLLRDY: PLL clock ready - * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready - * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready - * @arg RCC_FLAG_PINRST: Pin reset - * @arg RCC_FLAG_PORRST: POR/PDR reset - * @arg RCC_FLAG_SFTRST: Software reset - * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset - * @arg RCC_FLAG_WWDGRST: Window Watchdog reset - * @arg RCC_FLAG_LPWRRST: Low Power reset - * - * @retval The new state of RCC_FLAG (SET or RESET). - */ -FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) -{ - uint32_t tmp = 0; - uint32_t statusreg = 0; - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_RCC_FLAG(RCC_FLAG)); - - /* Get the RCC register index */ - tmp = RCC_FLAG >> 5; - if (tmp == 1) /* The flag to check is in CR register */ - { - statusreg = RCC->CR; - } - else if (tmp == 2) /* The flag to check is in BDCR register */ - { - statusreg = RCC->BDCR; - } - else /* The flag to check is in CSR register */ - { - statusreg = RCC->CSR; - } - - /* Get the flag position */ - tmp = RCC_FLAG & FLAG_Mask; - if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the flag status */ - return bitstatus; -} - -/** - * @brief Clears the RCC reset flags. - * @note The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, - * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST - * @param None - * @retval None - */ -void RCC_ClearFlag(void) -{ - /* Set RMVF bit to clear the reset flags */ - RCC->CSR |= CSR_RMVF_Set; -} - -/** - * @brief Checks whether the specified RCC interrupt has occurred or not. - * @param RCC_IT: specifies the RCC interrupt source to check. - * - * For @b STM32_Connectivity_line_devices, this parameter can be one of the - * following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt - * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt - * @arg RCC_IT_CSS: Clock Security System interrupt - * - * For @b other_STM32_devices, this parameter can be one of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * @arg RCC_IT_CSS: Clock Security System interrupt - * - * @retval The new state of RCC_IT (SET or RESET). - */ -ITStatus RCC_GetITStatus(uint8_t RCC_IT) -{ - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_RCC_GET_IT(RCC_IT)); - - /* Check the status of the specified RCC interrupt */ - if ((RCC->CIR & RCC_IT) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the RCC_IT status */ - return bitstatus; -} - -/** - * @brief Clears the RCC's interrupt pending bits. - * @param RCC_IT: specifies the interrupt pending bit to clear. - * - * For @b STM32_Connectivity_line_devices, this parameter can be any combination - * of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt - * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt - * @arg RCC_IT_CSS: Clock Security System interrupt - * - * For @b other_STM32_devices, this parameter can be any combination of the - * following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * - * @arg RCC_IT_CSS: Clock Security System interrupt - * @retval None - */ -void RCC_ClearITPendingBit(uint8_t RCC_IT) -{ - /* Check the parameters */ - assert_param(IS_RCC_CLEAR_IT(RCC_IT)); - - /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt - pending bits */ - *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c deleted file mode 100644 index f05aef5..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c +++ /dev/null @@ -1,339 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_rtc.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the RTC firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_rtc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup RTC - * @brief RTC driver modules - * @{ - */ - -/** @defgroup RTC_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - -/** @defgroup RTC_Private_Defines - * @{ - */ -#define RTC_LSB_MASK ((uint32_t)0x0000FFFF) /*!< RTC LSB Mask */ -#define PRLH_MSB_MASK ((uint32_t)0x000F0000) /*!< RTC Prescaler MSB Mask */ - -/** - * @} - */ - -/** @defgroup RTC_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup RTC_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup RTC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup RTC_Private_Functions - * @{ - */ - -/** - * @brief Enables or disables the specified RTC interrupts. - * @param RTC_IT: specifies the RTC interrupts sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_OW: Overflow interrupt - * @arg RTC_IT_ALR: Alarm interrupt - * @arg RTC_IT_SEC: Second interrupt - * @param NewState: new state of the specified RTC interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RTC_IT(RTC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RTC->CRH |= RTC_IT; - } - else - { - RTC->CRH &= (uint16_t)~RTC_IT; - } -} - -/** - * @brief Enters the RTC configuration mode. - * @param None - * @retval None - */ -void RTC_EnterConfigMode(void) -{ - /* Set the CNF flag to enter in the Configuration Mode */ - RTC->CRL |= RTC_CRL_CNF; -} - -/** - * @brief Exits from the RTC configuration mode. - * @param None - * @retval None - */ -void RTC_ExitConfigMode(void) -{ - /* Reset the CNF flag to exit from the Configuration Mode */ - RTC->CRL &= (uint16_t)~((uint16_t)RTC_CRL_CNF); -} - -/** - * @brief Gets the RTC counter value. - * @param None - * @retval RTC counter value. - */ -uint32_t RTC_GetCounter(void) -{ - uint16_t tmp = 0; - tmp = RTC->CNTL; - return (((uint32_t)RTC->CNTH << 16 ) | tmp) ; -} - -/** - * @brief Sets the RTC counter value. - * @param CounterValue: RTC counter new value. - * @retval None - */ -void RTC_SetCounter(uint32_t CounterValue) -{ - RTC_EnterConfigMode(); - /* Set RTC COUNTER MSB word */ - RTC->CNTH = CounterValue >> 16; - /* Set RTC COUNTER LSB word */ - RTC->CNTL = (CounterValue & RTC_LSB_MASK); - RTC_ExitConfigMode(); -} - -/** - * @brief Sets the RTC prescaler value. - * @param PrescalerValue: RTC prescaler new value. - * @retval None - */ -void RTC_SetPrescaler(uint32_t PrescalerValue) -{ - /* Check the parameters */ - assert_param(IS_RTC_PRESCALER(PrescalerValue)); - - RTC_EnterConfigMode(); - /* Set RTC PRESCALER MSB word */ - RTC->PRLH = (PrescalerValue & PRLH_MSB_MASK) >> 16; - /* Set RTC PRESCALER LSB word */ - RTC->PRLL = (PrescalerValue & RTC_LSB_MASK); - RTC_ExitConfigMode(); -} - -/** - * @brief Sets the RTC alarm value. - * @param AlarmValue: RTC alarm new value. - * @retval None - */ -void RTC_SetAlarm(uint32_t AlarmValue) -{ - RTC_EnterConfigMode(); - /* Set the ALARM MSB word */ - RTC->ALRH = AlarmValue >> 16; - /* Set the ALARM LSB word */ - RTC->ALRL = (AlarmValue & RTC_LSB_MASK); - RTC_ExitConfigMode(); -} - -/** - * @brief Gets the RTC divider value. - * @param None - * @retval RTC Divider value. - */ -uint32_t RTC_GetDivider(void) -{ - uint32_t tmp = 0x00; - tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16; - tmp |= RTC->DIVL; - return tmp; -} - -/** - * @brief Waits until last write operation on RTC registers has finished. - * @note This function must be called before any write to RTC registers. - * @param None - * @retval None - */ -void RTC_WaitForLastTask(void) -{ - /* Loop until RTOFF flag is set */ - while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET) - { - } -} - -/** - * @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL) - * are synchronized with RTC APB clock. - * @note This function must be called before any read operation after an APB reset - * or an APB clock stop. - * @param None - * @retval None - */ -void RTC_WaitForSynchro(void) -{ - /* Clear RSF flag */ - RTC->CRL &= (uint16_t)~RTC_FLAG_RSF; - /* Loop until RSF flag is set */ - while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET) - { - } -} - -/** - * @brief Checks whether the specified RTC flag is set or not. - * @param RTC_FLAG: specifies the flag to check. - * This parameter can be one the following values: - * @arg RTC_FLAG_RTOFF: RTC Operation OFF flag - * @arg RTC_FLAG_RSF: Registers Synchronized flag - * @arg RTC_FLAG_OW: Overflow flag - * @arg RTC_FLAG_ALR: Alarm flag - * @arg RTC_FLAG_SEC: Second flag - * @retval The new state of RTC_FLAG (SET or RESET). - */ -FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); - - if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the RTC's pending flags. - * @param RTC_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after - * an APB reset or an APB Clock stop. - * @arg RTC_FLAG_OW: Overflow flag - * @arg RTC_FLAG_ALR: Alarm flag - * @arg RTC_FLAG_SEC: Second flag - * @retval None - */ -void RTC_ClearFlag(uint16_t RTC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); - - /* Clear the corresponding RTC flag */ - RTC->CRL &= (uint16_t)~RTC_FLAG; -} - -/** - * @brief Checks whether the specified RTC interrupt has occurred or not. - * @param RTC_IT: specifies the RTC interrupts sources to check. - * This parameter can be one of the following values: - * @arg RTC_IT_OW: Overflow interrupt - * @arg RTC_IT_ALR: Alarm interrupt - * @arg RTC_IT_SEC: Second interrupt - * @retval The new state of the RTC_IT (SET or RESET). - */ -ITStatus RTC_GetITStatus(uint16_t RTC_IT) -{ - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_RTC_GET_IT(RTC_IT)); - - bitstatus = (ITStatus)(RTC->CRL & RTC_IT); - if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the RTC's interrupt pending bits. - * @param RTC_IT: specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg RTC_IT_OW: Overflow interrupt - * @arg RTC_IT_ALR: Alarm interrupt - * @arg RTC_IT_SEC: Second interrupt - * @retval None - */ -void RTC_ClearITPendingBit(uint16_t RTC_IT) -{ - /* Check the parameters */ - assert_param(IS_RTC_IT(RTC_IT)); - - /* Clear the corresponding RTC pending bit */ - RTC->CRL &= (uint16_t)~RTC_IT; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c deleted file mode 100644 index 4ec65b2..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c +++ /dev/null @@ -1,908 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_spi.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the SPI firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_spi.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup SPI - * @brief SPI driver modules - * @{ - */ - -/** @defgroup SPI_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - - -/** @defgroup SPI_Private_Defines - * @{ - */ - -/* SPI SPE mask */ -#define CR1_SPE_Set ((uint16_t)0x0040) -#define CR1_SPE_Reset ((uint16_t)0xFFBF) - -/* I2S I2SE mask */ -#define I2SCFGR_I2SE_Set ((uint16_t)0x0400) -#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF) - -/* SPI CRCNext mask */ -#define CR1_CRCNext_Set ((uint16_t)0x1000) - -/* SPI CRCEN mask */ -#define CR1_CRCEN_Set ((uint16_t)0x2000) -#define CR1_CRCEN_Reset ((uint16_t)0xDFFF) - -/* SPI SSOE mask */ -#define CR2_SSOE_Set ((uint16_t)0x0004) -#define CR2_SSOE_Reset ((uint16_t)0xFFFB) - -/* SPI registers Masks */ -#define CR1_CLEAR_Mask ((uint16_t)0x3040) -#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040) - -/* SPI or I2S mode selection masks */ -#define SPI_Mode_Select ((uint16_t)0xF7FF) -#define I2S_Mode_Select ((uint16_t)0x0800) - -/* I2S clock source selection masks */ -#define I2S2_CLOCK_SRC ((uint32_t)(0x00020000)) -#define I2S3_CLOCK_SRC ((uint32_t)(0x00040000)) -#define I2S_MUL_MASK ((uint32_t)(0x0000F000)) -#define I2S_DIV_MASK ((uint32_t)(0x000000F0)) - -/** - * @} - */ - -/** @defgroup SPI_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup SPI_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup SPI_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup SPI_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the SPIx peripheral registers to their default - * reset values (Affects also the I2Ss). - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @retval None - */ -void SPI_I2S_DeInit(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - if (SPIx == SPI1) - { - /* Enable SPI1 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); - /* Release SPI1 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); - } - else if (SPIx == SPI2) - { - /* Enable SPI2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); - /* Release SPI2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); - } - else - { - if (SPIx == SPI3) - { - /* Enable SPI3 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE); - /* Release SPI3 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE); - } - } -} - -/** - * @brief Initializes the SPIx peripheral according to the specified - * parameters in the SPI_InitStruct. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that - * contains the configuration information for the specified SPI peripheral. - * @retval None - */ -void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) -{ - uint16_t tmpreg = 0; - - /* check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Check the SPI parameters */ - assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); - assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); - assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize)); - assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); - assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); - assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); - assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); - assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); - assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); - -/*---------------------------- SPIx CR1 Configuration ------------------------*/ - /* Get the SPIx CR1 value */ - tmpreg = SPIx->CR1; - /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */ - tmpreg &= CR1_CLEAR_Mask; - /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler - master/salve mode, CPOL and CPHA */ - /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ - /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */ - /* Set LSBFirst bit according to SPI_FirstBit value */ - /* Set BR bits according to SPI_BaudRatePrescaler value */ - /* Set CPOL bit according to SPI_CPOL value */ - /* Set CPHA bit according to SPI_CPHA value */ - tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | - SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | - SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | - SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); - /* Write to SPIx CR1 */ - SPIx->CR1 = tmpreg; - - /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ - SPIx->I2SCFGR &= SPI_Mode_Select; - -/*---------------------------- SPIx CRCPOLY Configuration --------------------*/ - /* Write to SPIx CRCPOLY */ - SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; -} - -/** - * @brief Initializes the SPIx peripheral according to the specified - * parameters in the I2S_InitStruct. - * @param SPIx: where x can be 2 or 3 to select the SPI peripheral - * (configured in I2S mode). - * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that - * contains the configuration information for the specified SPI peripheral - * configured in I2S mode. - * @note - * The function calculates the optimal prescaler needed to obtain the most - * accurate audio frequency (depending on the I2S clock source, the PLL values - * and the product configuration). But in case the prescaler value is greater - * than 511, the default value (0x02) will be configured instead. * - * @retval None - */ -void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) -{ - uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; - uint32_t tmp = 0; - RCC_ClocksTypeDef RCC_Clocks; - uint32_t sourceclock = 0; - - /* Check the I2S parameters */ - assert_param(IS_SPI_23_PERIPH(SPIx)); - assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); - assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); - assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); - assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); - assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); - assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); - -/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; - SPIx->I2SPR = 0x0002; - - /* Get the I2SCFGR register value */ - tmpreg = SPIx->I2SCFGR; - - /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ - if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) - { - i2sodd = (uint16_t)0; - i2sdiv = (uint16_t)2; - } - /* If the requested audio frequency is not the default, compute the prescaler */ - else - { - /* Check the frame length (For the Prescaler computing) */ - if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) - { - /* Packet length is 16 bits */ - packetlength = 1; - } - else - { - /* Packet length is 32 bits */ - packetlength = 2; - } - - /* Get the I2S clock source mask depending on the peripheral number */ - if(((uint32_t)SPIx) == SPI2_BASE) - { - /* The mask is relative to I2S2 */ - tmp = I2S2_CLOCK_SRC; - } - else - { - /* The mask is relative to I2S3 */ - tmp = I2S3_CLOCK_SRC; - } - - /* Check the I2S clock source configuration depending on the Device: - Only Connectivity line devices have the PLL3 VCO clock */ -#ifdef STM32F10X_CL - if((RCC->CFGR2 & tmp) != 0) - { - /* Get the configuration bits of RCC PLL3 multiplier */ - tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12); - - /* Get the value of the PLL3 multiplier */ - if((tmp > 5) && (tmp < 15)) - { - /* Multiplier is between 8 and 14 (value 15 is forbidden) */ - tmp += 2; - } - else - { - if (tmp == 15) - { - /* Multiplier is 20 */ - tmp = 20; - } - } - /* Get the PREDIV2 value */ - sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1); - - /* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */ - sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2); - } - else - { - /* I2S Clock source is System clock: Get System Clock frequency */ - RCC_GetClocksFreq(&RCC_Clocks); - - /* Get the source clock value: based on System Clock value */ - sourceclock = RCC_Clocks.SYSCLK_Frequency; - } -#else /* STM32F10X_HD */ - /* I2S Clock source is System clock: Get System Clock frequency */ - RCC_GetClocksFreq(&RCC_Clocks); - - /* Get the source clock value: based on System Clock value */ - sourceclock = RCC_Clocks.SYSCLK_Frequency; -#endif /* STM32F10X_CL */ - - /* Compute the Real divider depending on the MCLK output state with a floating point */ - if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) - { - /* MCLK output is enabled */ - tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); - } - else - { - /* MCLK output is disabled */ - tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5); - } - - /* Remove the floating point */ - tmp = tmp / 10; - - /* Check the parity of the divider */ - i2sodd = (uint16_t)(tmp & (uint16_t)0x0001); - - /* Compute the i2sdiv prescaler */ - i2sdiv = (uint16_t)((tmp - i2sodd) / 2); - - /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ - i2sodd = (uint16_t) (i2sodd << 8); - } - - /* Test if the divider is 1 or 0 or greater than 0xFF */ - if ((i2sdiv < 2) || (i2sdiv > 0xFF)) - { - /* Set the default values */ - i2sdiv = 2; - i2sodd = 0; - } - - /* Write to SPIx I2SPR register the computed value */ - SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput)); - - /* Configure the I2S with the SPI_InitStruct values */ - tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \ - (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ - (uint16_t)I2S_InitStruct->I2S_CPOL)))); - - /* Write to SPIx I2SCFGR */ - SPIx->I2SCFGR = tmpreg; -} - -/** - * @brief Fills each SPI_InitStruct member with its default value. - * @param SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized. - * @retval None - */ -void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) -{ -/*--------------- Reset SPI init structure parameters values -----------------*/ - /* Initialize the SPI_Direction member */ - SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; - /* initialize the SPI_Mode member */ - SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; - /* initialize the SPI_DataSize member */ - SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; - /* Initialize the SPI_CPOL member */ - SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; - /* Initialize the SPI_CPHA member */ - SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; - /* Initialize the SPI_NSS member */ - SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; - /* Initialize the SPI_BaudRatePrescaler member */ - SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; - /* Initialize the SPI_FirstBit member */ - SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; - /* Initialize the SPI_CRCPolynomial member */ - SPI_InitStruct->SPI_CRCPolynomial = 7; -} - -/** - * @brief Fills each I2S_InitStruct member with its default value. - * @param I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized. - * @retval None - */ -void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) -{ -/*--------------- Reset I2S init structure parameters values -----------------*/ - /* Initialize the I2S_Mode member */ - I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; - - /* Initialize the I2S_Standard member */ - I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; - - /* Initialize the I2S_DataFormat member */ - I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; - - /* Initialize the I2S_MCLKOutput member */ - I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; - - /* Initialize the I2S_AudioFreq member */ - I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; - - /* Initialize the I2S_CPOL member */ - I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; -} - -/** - * @brief Enables or disables the specified SPI peripheral. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param NewState: new state of the SPIx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI peripheral */ - SPIx->CR1 |= CR1_SPE_Set; - } - else - { - /* Disable the selected SPI peripheral */ - SPIx->CR1 &= CR1_SPE_Reset; - } -} - -/** - * @brief Enables or disables the specified SPI peripheral (in I2S mode). - * @param SPIx: where x can be 2 or 3 to select the SPI peripheral. - * @param NewState: new state of the SPIx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_23_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI peripheral (in I2S mode) */ - SPIx->I2SCFGR |= I2SCFGR_I2SE_Set; - } - else - { - /* Disable the selected SPI peripheral (in I2S mode) */ - SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset; - } -} - -/** - * @brief Enables or disables the specified SPI/I2S interrupts. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled. - * This parameter can be one of the following values: - * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask - * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask - * @arg SPI_I2S_IT_ERR: Error interrupt mask - * @param NewState: new state of the specified SPI/I2S interrupt. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) -{ - uint16_t itpos = 0, itmask = 0 ; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); - - /* Get the SPI/I2S IT index */ - itpos = SPI_I2S_IT >> 4; - - /* Set the IT mask */ - itmask = (uint16_t)1 << (uint16_t)itpos; - - if (NewState != DISABLE) - { - /* Enable the selected SPI/I2S interrupt */ - SPIx->CR2 |= itmask; - } - else - { - /* Disable the selected SPI/I2S interrupt */ - SPIx->CR2 &= (uint16_t)~itmask; - } -} - -/** - * @brief Enables or disables the SPIx/I2Sx DMA interface. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @param SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request - * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request - * @param NewState: new state of the selected SPI/I2S DMA transfer request. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq)); - if (NewState != DISABLE) - { - /* Enable the selected SPI/I2S DMA requests */ - SPIx->CR2 |= SPI_I2S_DMAReq; - } - else - { - /* Disable the selected SPI/I2S DMA requests */ - SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq; - } -} - -/** - * @brief Transmits a Data through the SPIx/I2Sx peripheral. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @param Data : Data to be transmitted. - * @retval None - */ -void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Write in the DR register the data to be sent */ - SPIx->DR = Data; -} - -/** - * @brief Returns the most recent received data by the SPIx/I2Sx peripheral. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @retval The value of the received data. - */ -uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Return the data in the DR register */ - return SPIx->DR; -} - -/** - * @brief Configures internally by software the NSS pin for the selected SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state. - * This parameter can be one of the following values: - * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally - * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally - * @retval None - */ -void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); - if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) - { - /* Set NSS pin internally by software */ - SPIx->CR1 |= SPI_NSSInternalSoft_Set; - } - else - { - /* Reset NSS pin internally by software */ - SPIx->CR1 &= SPI_NSSInternalSoft_Reset; - } -} - -/** - * @brief Enables or disables the SS output for the selected SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param NewState: new state of the SPIx SS output. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI SS output */ - SPIx->CR2 |= CR2_SSOE_Set; - } - else - { - /* Disable the selected SPI SS output */ - SPIx->CR2 &= CR2_SSOE_Reset; - } -} - -/** - * @brief Configures the data size for the selected SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param SPI_DataSize: specifies the SPI data size. - * This parameter can be one of the following values: - * @arg SPI_DataSize_16b: Set data frame format to 16bit - * @arg SPI_DataSize_8b: Set data frame format to 8bit - * @retval None - */ -void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_DATASIZE(SPI_DataSize)); - /* Clear DFF bit */ - SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b; - /* Set new DFF bit value */ - SPIx->CR1 |= SPI_DataSize; -} - -/** - * @brief Transmit the SPIx CRC value. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @retval None - */ -void SPI_TransmitCRC(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Enable the selected SPI CRC transmission */ - SPIx->CR1 |= CR1_CRCNext_Set; -} - -/** - * @brief Enables or disables the CRC value calculation of the transferred bytes. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param NewState: new state of the SPIx CRC value calculation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI CRC calculation */ - SPIx->CR1 |= CR1_CRCEN_Set; - } - else - { - /* Disable the selected SPI CRC calculation */ - SPIx->CR1 &= CR1_CRCEN_Reset; - } -} - -/** - * @brief Returns the transmit or the receive CRC register value for the specified SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param SPI_CRC: specifies the CRC register to be read. - * This parameter can be one of the following values: - * @arg SPI_CRC_Tx: Selects Tx CRC register - * @arg SPI_CRC_Rx: Selects Rx CRC register - * @retval The selected CRC register value.. - */ -uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC) -{ - uint16_t crcreg = 0; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_CRC(SPI_CRC)); - if (SPI_CRC != SPI_CRC_Rx) - { - /* Get the Tx CRC register */ - crcreg = SPIx->TXCRCR; - } - else - { - /* Get the Rx CRC register */ - crcreg = SPIx->RXCRCR; - } - /* Return the selected CRC register */ - return crcreg; -} - -/** - * @brief Returns the CRC Polynomial register value for the specified SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @retval The CRC Polynomial register value. - */ -uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Return the CRC polynomial register */ - return SPIx->CRCPR; -} - -/** - * @brief Selects the data transfer direction in bi-directional mode for the specified SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param SPI_Direction: specifies the data transfer direction in bi-directional mode. - * This parameter can be one of the following values: - * @arg SPI_Direction_Tx: Selects Tx transmission direction - * @arg SPI_Direction_Rx: Selects Rx receive direction - * @retval None - */ -void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_DIRECTION(SPI_Direction)); - if (SPI_Direction == SPI_Direction_Tx) - { - /* Set the Tx only mode */ - SPIx->CR1 |= SPI_Direction_Tx; - } - else - { - /* Set the Rx only mode */ - SPIx->CR1 &= SPI_Direction_Rx; - } -} - -/** - * @brief Checks whether the specified SPI/I2S flag is set or not. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @param SPI_I2S_FLAG: specifies the SPI/I2S flag to check. - * This parameter can be one of the following values: - * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag. - * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. - * @arg SPI_I2S_FLAG_BSY: Busy flag. - * @arg SPI_I2S_FLAG_OVR: Overrun flag. - * @arg SPI_FLAG_MODF: Mode Fault flag. - * @arg SPI_FLAG_CRCERR: CRC Error flag. - * @arg I2S_FLAG_UDR: Underrun Error flag. - * @arg I2S_FLAG_CHSIDE: Channel Side flag. - * @retval The new state of SPI_I2S_FLAG (SET or RESET). - */ -FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); - /* Check the status of the specified SPI/I2S flag */ - if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET) - { - /* SPI_I2S_FLAG is set */ - bitstatus = SET; - } - else - { - /* SPI_I2S_FLAG is reset */ - bitstatus = RESET; - } - /* Return the SPI_I2S_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the SPIx CRC Error (CRCERR) flag. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * @param SPI_I2S_FLAG: specifies the SPI flag to clear. - * This function clears only CRCERR flag. - * @note - * - OVR (OverRun error) flag is cleared by software sequence: a read - * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read - * operation to SPI_SR register (SPI_I2S_GetFlagStatus()). - * - UDR (UnderRun error) flag is cleared by a read operation to - * SPI_SR register (SPI_I2S_GetFlagStatus()). - * - MODF (Mode Fault) flag is cleared by software sequence: a read/write - * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a - * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI). - * @retval None - */ -void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG)); - - /* Clear the selected SPI CRC Error (CRCERR) flag */ - SPIx->SR = (uint16_t)~SPI_I2S_FLAG; -} - -/** - * @brief Checks whether the specified SPI/I2S interrupt has occurred or not. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to check. - * This parameter can be one of the following values: - * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt. - * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. - * @arg SPI_I2S_IT_OVR: Overrun interrupt. - * @arg SPI_IT_MODF: Mode Fault interrupt. - * @arg SPI_IT_CRCERR: CRC Error interrupt. - * @arg I2S_IT_UDR: Underrun Error interrupt. - * @retval The new state of SPI_I2S_IT (SET or RESET). - */ -ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) -{ - ITStatus bitstatus = RESET; - uint16_t itpos = 0, itmask = 0, enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); - - /* Get the SPI/I2S IT index */ - itpos = 0x01 << (SPI_I2S_IT & 0x0F); - - /* Get the SPI/I2S IT mask */ - itmask = SPI_I2S_IT >> 4; - - /* Set the IT mask */ - itmask = 0x01 << itmask; - - /* Get the SPI_I2S_IT enable bit status */ - enablestatus = (SPIx->CR2 & itmask) ; - - /* Check the status of the specified SPI/I2S interrupt */ - if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus) - { - /* SPI_I2S_IT is set */ - bitstatus = SET; - } - else - { - /* SPI_I2S_IT is reset */ - bitstatus = RESET; - } - /* Return the SPI_I2S_IT status */ - return bitstatus; -} - -/** - * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear. - * This function clears only CRCERR interrupt pending bit. - * @note - * - OVR (OverRun Error) interrupt pending bit is cleared by software - * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData()) - * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()). - * - UDR (UnderRun Error) interrupt pending bit is cleared by a read - * operation to SPI_SR register (SPI_I2S_GetITStatus()). - * - MODF (Mode Fault) interrupt pending bit is cleared by software sequence: - * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus()) - * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable - * the SPI). - * @retval None - */ -void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) -{ - uint16_t itpos = 0; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT)); - - /* Get the SPI IT index */ - itpos = 0x01 << (SPI_I2S_IT & 0x0F); - - /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */ - SPIx->SR = (uint16_t)~itpos; -} -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c deleted file mode 100644 index bfb4dd1..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c +++ /dev/null @@ -1,2890 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_tim.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the TIM firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_tim.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup TIM - * @brief TIM driver modules - * @{ - */ - -/** @defgroup TIM_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Defines - * @{ - */ - -/* ---------------------- TIM registers bit mask ------------------------ */ -#define SMCR_ETR_Mask ((uint16_t)0x00FF) -#define CCMR_Offset ((uint16_t)0x0018) -#define CCER_CCE_Set ((uint16_t)0x0001) -#define CCER_CCNE_Set ((uint16_t)0x0004) - -/** - * @} - */ - -/** @defgroup TIM_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_FunctionPrototypes - * @{ - */ - -static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -/** - * @} - */ - -/** @defgroup TIM_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the TIMx peripheral registers to their default reset values. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @retval None - */ -void TIM_DeInit(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - if (TIMx == TIM1) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); - } - else if (TIMx == TIM2) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); - } - else if (TIMx == TIM3) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); - } - else if (TIMx == TIM4) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); - } - else if (TIMx == TIM5) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); - } - else if (TIMx == TIM6) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); - } - else if (TIMx == TIM7) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); - } - else if (TIMx == TIM8) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); - } - else if (TIMx == TIM9) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE); - } - else if (TIMx == TIM10) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE); - } - else if (TIMx == TIM11) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE); - } - else if (TIMx == TIM12) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE); - } - else if (TIMx == TIM13) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE); - } - else if (TIMx == TIM14) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE); - } - else if (TIMx == TIM15) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE); - } - else if (TIMx == TIM16) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE); - } - else - { - if (TIMx == TIM17) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE); - } - } -} - -/** - * @brief Initializes the TIMx Time Base Unit peripheral according to - * the specified parameters in the TIM_TimeBaseInitStruct. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef - * structure that contains the configuration information for the - * specified TIM peripheral. - * @retval None - */ -void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) -{ - uint16_t tmpcr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); - assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); - - tmpcr1 = TIMx->CR1; - - if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)|| - (TIMx == TIM4) || (TIMx == TIM5)) - { - /* Select the Counter Mode */ - tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); - tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode; - } - - if((TIMx != TIM6) && (TIMx != TIM7)) - { - /* Set the clock division */ - tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD)); - tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision; - } - - TIMx->CR1 = tmpcr1; - - /* Set the Autoreload value */ - TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; - - /* Set the Prescaler value */ - TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; - - if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17)) - { - /* Set the Repetition Counter value */ - TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; - } - - /* Generate an update event to reload the Prescaler and the Repetition counter - values immediately */ - TIMx->EGR = TIM_PSCReloadMode_Immediate; -} - -/** - * @brief Initializes the TIMx Channel1 according to the specified - * parameters in the TIM_OCInitStruct. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= (uint16_t)(~(uint16_t)TIM_CCER_CC1E); - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC1M)); - tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC1S)); - - /* Select the Output Compare Mode */ - tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1P)); - /* Set the Output Compare Polarity */ - tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; - - /* Set the Output State */ - tmpccer |= TIM_OCInitStruct->TIM_OutputState; - - if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| - (TIMx == TIM16)|| (TIMx == TIM17)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NP)); - /* Set the Output N Polarity */ - tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; - - /* Reset the Output N State */ - tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NE)); - /* Set the Output N State */ - tmpccer |= TIM_OCInitStruct->TIM_OutputNState; - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1)); - tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1N)); - - /* Set the Output Idle state */ - tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; - /* Set the Output N Idle state */ - tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIMx Channel2 according to the specified - * parameters in the TIM_OCInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select - * the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC2E)); - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC2M)); - tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S)); - - /* Select the Output Compare Mode */ - tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2P)); - /* Set the Output Compare Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4); - - /* Set the Output State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4); - - if((TIMx == TIM1) || (TIMx == TIM8)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NP)); - /* Set the Output N Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4); - - /* Reset the Output N State */ - tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NE)); - /* Set the Output N State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2)); - tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2N)); - - /* Set the Output Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2); - /* Set the Output N Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIMx Channel3 according to the specified - * parameters in the TIM_OCInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC3E)); - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC3M)); - tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC3S)); - /* Select the Output Compare Mode */ - tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3P)); - /* Set the Output Compare Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8); - - /* Set the Output State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8); - - if((TIMx == TIM1) || (TIMx == TIM8)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NP)); - /* Set the Output N Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8); - /* Reset the Output N State */ - tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NE)); - - /* Set the Output N State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8); - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3)); - tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3N)); - /* Set the Output Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4); - /* Set the Output N Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIMx Channel4 according to the specified - * parameters in the TIM_OCInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - /* Disable the Channel 2: Reset the CC4E Bit */ - TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC4E)); - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC4M)); - tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC4S)); - - /* Select the Output Compare Mode */ - tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC4P)); - /* Set the Output Compare Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12); - - /* Set the Output State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12); - - if((TIMx == TIM1) || (TIMx == TIM8)) - { - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - /* Reset the Output Compare IDLE State */ - tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS4)); - /* Set the Output Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIM peripheral according to the specified - * parameters in the TIM_ICInitStruct. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel)); - assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); - assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); - - if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || - (TIMx == TIM4) ||(TIMx == TIM5)) - { - assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); - } - else - { - assert_param(IS_TIM_IC_POLARITY_LITE(TIM_ICInitStruct->TIM_ICPolarity)); - } - if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) - { - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - /* TI1 Configuration */ - TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) - { - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - /* TI2 Configuration */ - TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) - { - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - /* TI3 Configuration */ - TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else - { - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - /* TI4 Configuration */ - TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } -} - -/** - * @brief Configures the TIM peripheral according to the specified - * parameters in the TIM_ICInitStruct to measure an external PWM signal. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - uint16_t icoppositepolarity = TIM_ICPolarity_Rising; - uint16_t icoppositeselection = TIM_ICSelection_DirectTI; - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - /* Select the Opposite Input Polarity */ - if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) - { - icoppositepolarity = TIM_ICPolarity_Falling; - } - else - { - icoppositepolarity = TIM_ICPolarity_Rising; - } - /* Select the Opposite Input */ - if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) - { - icoppositeselection = TIM_ICSelection_IndirectTI; - } - else - { - icoppositeselection = TIM_ICSelection_DirectTI; - } - if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) - { - /* TI1 Configuration */ - TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - /* TI2 Configuration */ - TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else - { - /* TI2 Configuration */ - TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - /* TI1 Configuration */ - TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } -} - -/** - * @brief Configures the: Break feature, dead time, Lock level, the OSSI, - * the OSSR State and the AOE(automatic output enable). - * @param TIMx: where x can be 1 or 8 to select the TIM - * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that - * contains the BDTR Register configuration information for the TIM peripheral. - * @retval None - */ -void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState)); - assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState)); - assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel)); - assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break)); - assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity)); - assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput)); - /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | - TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | - TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | - TIM_BDTRInitStruct->TIM_AutomaticOutput; -} - -/** - * @brief Fills each TIM_TimeBaseInitStruct member with its default value. - * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef - * structure which will be initialized. - * @retval None - */ -void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) -{ - /* Set the default configuration */ - TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF; - TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; - TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; - TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; - TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; -} - -/** - * @brief Fills each TIM_OCInitStruct member with its default value. - * @param TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure which will - * be initialized. - * @retval None - */ -void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - /* Set the default configuration */ - TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; - TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; - TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; - TIM_OCInitStruct->TIM_Pulse = 0x0000; - TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; - TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; - TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; - TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; -} - -/** - * @brief Fills each TIM_ICInitStruct member with its default value. - * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will - * be initialized. - * @retval None - */ -void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - /* Set the default configuration */ - TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; - TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; - TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; - TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; - TIM_ICInitStruct->TIM_ICFilter = 0x00; -} - -/** - * @brief Fills each TIM_BDTRInitStruct member with its default value. - * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which - * will be initialized. - * @retval None - */ -void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct) -{ - /* Set the default configuration */ - TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; - TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; - TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; - TIM_BDTRInitStruct->TIM_DeadTime = 0x00; - TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; - TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; - TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; -} - -/** - * @brief Enables or disables the specified TIM peripheral. - * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. - * @param NewState: new state of the TIMx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the TIM Counter */ - TIMx->CR1 |= TIM_CR1_CEN; - } - else - { - /* Disable the TIM Counter */ - TIMx->CR1 &= (uint16_t)(~((uint16_t)TIM_CR1_CEN)); - } -} - -/** - * @brief Enables or disables the TIM peripheral Main Outputs. - * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral. - * @param NewState: new state of the TIM peripheral Main Outputs. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the TIM Main Output */ - TIMx->BDTR |= TIM_BDTR_MOE; - } - else - { - /* Disable the TIM Main Output */ - TIMx->BDTR &= (uint16_t)(~((uint16_t)TIM_BDTR_MOE)); - } -} - -/** - * @brief Enables or disables the specified TIM interrupts. - * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. - * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg TIM_IT_Update: TIM update Interrupt source - * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source - * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source - * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source - * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source - * @arg TIM_IT_COM: TIM Commutation Interrupt source - * @arg TIM_IT_Trigger: TIM Trigger Interrupt source - * @arg TIM_IT_Break: TIM Break Interrupt source - * @note - * - TIM6 and TIM7 can only generate an update interrupt. - * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, - * TIM_IT_CC2 or TIM_IT_Trigger. - * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. - * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. - * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. - * @param NewState: new state of the TIM interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_IT(TIM_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the Interrupt sources */ - TIMx->DIER |= TIM_IT; - } - else - { - /* Disable the Interrupt sources */ - TIMx->DIER &= (uint16_t)~TIM_IT; - } -} - -/** - * @brief Configures the TIMx event to be generate by software. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param TIM_EventSource: specifies the event source. - * This parameter can be one or more of the following values: - * @arg TIM_EventSource_Update: Timer update Event source - * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source - * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source - * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source - * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source - * @arg TIM_EventSource_COM: Timer COM event source - * @arg TIM_EventSource_Trigger: Timer Trigger Event source - * @arg TIM_EventSource_Break: Timer Break event source - * @note - * - TIM6 and TIM7 can only generate an update event. - * - TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8. - * @retval None - */ -void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource)); - - /* Set the event sources */ - TIMx->EGR = TIM_EventSource; -} - -/** - * @brief Configures the TIMx's DMA interface. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select - * the TIM peripheral. - * @param TIM_DMABase: DMA Base address. - * This parameter can be one of the following values: - * @arg TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR, - * TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR, - * TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER, - * TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR, - * TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2, - * TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR, - * TIM_DMABase_DCR. - * @param TIM_DMABurstLength: DMA Burst length. - * This parameter can be one value between: - * TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers. - * @retval None - */ -void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST4_PERIPH(TIMx)); - assert_param(IS_TIM_DMA_BASE(TIM_DMABase)); - assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); - /* Set the DMA Base and the DMA Burst Length */ - TIMx->DCR = TIM_DMABase | TIM_DMABurstLength; -} - -/** - * @brief Enables or disables the TIMx's DMA Requests. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 15, 16 or 17 - * to select the TIM peripheral. - * @param TIM_DMASource: specifies the DMA Request sources. - * This parameter can be any combination of the following values: - * @arg TIM_DMA_Update: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_Trigger: TIM Trigger DMA source - * @param NewState: new state of the DMA Request sources. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST9_PERIPH(TIMx)); - assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the DMA sources */ - TIMx->DIER |= TIM_DMASource; - } - else - { - /* Disable the DMA sources */ - TIMx->DIER &= (uint16_t)~TIM_DMASource; - } -} - -/** - * @brief Configures the TIMx internal Clock - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 - * to select the TIM peripheral. - * @retval None - */ -void TIM_InternalClockConfig(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - /* Disable slave mode to clock the prescaler directly with the internal clock */ - TIMx->SMCR &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); -} - -/** - * @brief Configures the TIMx Internal Trigger as External Clock - * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_ITRSource: Trigger source. - * This parameter can be one of the following values: - * @param TIM_TS_ITR0: Internal Trigger 0 - * @param TIM_TS_ITR1: Internal Trigger 1 - * @param TIM_TS_ITR2: Internal Trigger 2 - * @param TIM_TS_ITR3: Internal Trigger 3 - * @retval None - */ -void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); - /* Select the Internal Trigger */ - TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); - /* Select the External clock mode1 */ - TIMx->SMCR |= TIM_SlaveMode_External1; -} - -/** - * @brief Configures the TIMx Trigger as External Clock - * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_TIxExternalCLKSource: Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector - * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1 - * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2 - * @param TIM_ICPolarity: specifies the TIx Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param ICFilter : specifies the filter value. - * This parameter must be a value between 0x0 and 0xF. - * @retval None - */ -void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, - uint16_t TIM_ICPolarity, uint16_t ICFilter) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource)); - assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity)); - assert_param(IS_TIM_IC_FILTER(ICFilter)); - /* Configure the Timer Input Clock Source */ - if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) - { - TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); - } - else - { - TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); - } - /* Select the Trigger source */ - TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); - /* Select the External clock mode1 */ - TIMx->SMCR |= TIM_SlaveMode_External1; -} - -/** - * @brief Configures the External clock Mode1 - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. - * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. - * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. - * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity: The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. - * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. - * @param ExtTRGFilter: External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter) -{ - uint16_t tmpsmcr = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - /* Configure the ETR Clock source */ - TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - /* Reset the SMS Bits */ - tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); - /* Select the External clock mode1 */ - tmpsmcr |= TIM_SlaveMode_External1; - /* Select the Trigger selection : ETRF */ - tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS)); - tmpsmcr |= TIM_TS_ETRF; - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Configures the External clock Mode2 - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. - * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. - * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. - * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity: The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. - * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. - * @param ExtTRGFilter: External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, - uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - /* Configure the ETR Clock source */ - TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); - /* Enable the External clock mode2 */ - TIMx->SMCR |= TIM_SMCR_ECE; -} - -/** - * @brief Configures the TIMx External Trigger (ETR). - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. - * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. - * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. - * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity: The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. - * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. - * @param ExtTRGFilter: External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter) -{ - uint16_t tmpsmcr = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - tmpsmcr = TIMx->SMCR; - /* Reset the ETR Bits */ - tmpsmcr &= SMCR_ETR_Mask; - /* Set the Prescaler, the Filter value and the Polarity */ - tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8))); - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Configures the TIMx Prescaler. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param Prescaler: specifies the Prescaler Register value - * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode - * This parameter can be one of the following values: - * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event. - * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediately. - * @retval None - */ -void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); - /* Set the Prescaler value */ - TIMx->PSC = Prescaler; - /* Set or reset the UG Bit */ - TIMx->EGR = TIM_PSCReloadMode; -} - -/** - * @brief Specifies the TIMx Counter Mode to be used. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_CounterMode: specifies the Counter Mode to be used - * This parameter can be one of the following values: - * @arg TIM_CounterMode_Up: TIM Up Counting Mode - * @arg TIM_CounterMode_Down: TIM Down Counting Mode - * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 - * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 - * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 - * @retval None - */ -void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode) -{ - uint16_t tmpcr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode)); - tmpcr1 = TIMx->CR1; - /* Reset the CMS and DIR Bits */ - tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); - /* Set the Counter Mode */ - tmpcr1 |= TIM_CounterMode; - /* Write to TIMx CR1 register */ - TIMx->CR1 = tmpcr1; -} - -/** - * @brief Selects the Input Trigger source - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_InputTriggerSource: The Input Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal Trigger 0 - * @arg TIM_TS_ITR1: Internal Trigger 1 - * @arg TIM_TS_ITR2: Internal Trigger 2 - * @arg TIM_TS_ITR3: Internal Trigger 3 - * @arg TIM_TS_TI1F_ED: TI1 Edge Detector - * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 - * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 - * @arg TIM_TS_ETRF: External Trigger input - * @retval None - */ -void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) -{ - uint16_t tmpsmcr = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - /* Reset the TS Bits */ - tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS)); - /* Set the Input Trigger source */ - tmpsmcr |= TIM_InputTriggerSource; - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Configures the TIMx Encoder Interface. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_EncoderMode: specifies the TIMx Encoder Mode. - * This parameter can be one of the following values: - * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level. - * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level. - * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending - * on the level of the other input. - * @param TIM_IC1Polarity: specifies the IC1 Polarity - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Falling: IC Falling edge. - * @arg TIM_ICPolarity_Rising: IC Rising edge. - * @param TIM_IC2Polarity: specifies the IC2 Polarity - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Falling: IC Falling edge. - * @arg TIM_ICPolarity_Rising: IC Rising edge. - * @retval None - */ -void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, - uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity) -{ - uint16_t tmpsmcr = 0; - uint16_t tmpccmr1 = 0; - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST5_PERIPH(TIMx)); - assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); - assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); - assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Set the encoder Mode */ - tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); - tmpsmcr |= TIM_EncoderMode; - - /* Select the Capture Compare 1 and the Capture Compare 2 as input */ - tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S))); - tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0; - - /* Set the TI1 and the TI2 Polarities */ - tmpccer &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCER_CC1P)) & ((uint16_t)~((uint16_t)TIM_CCER_CC2P))); - tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4)); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Forces the TIMx output 1 waveform to active or inactive level. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC1REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF. - * @retval None - */ -void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC1M Bits */ - tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1M); - /* Configure The Forced output Mode */ - tmpccmr1 |= TIM_ForcedAction; - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Forces the TIMx output 2 waveform to active or inactive level. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC2REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF. - * @retval None - */ -void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC2M Bits */ - tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2M); - /* Configure The Forced output Mode */ - tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8); - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Forces the TIMx output 3 waveform to active or inactive level. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC3REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF. - * @retval None - */ -void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC1M Bits */ - tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3M); - /* Configure The Forced output Mode */ - tmpccmr2 |= TIM_ForcedAction; - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Forces the TIMx output 4 waveform to active or inactive level. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC4REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF. - * @retval None - */ -void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC2M Bits */ - tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4M); - /* Configure The Forced output Mode */ - tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8); - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Enables or disables TIMx peripheral Preload register on ARR. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param NewState: new state of the TIMx peripheral Preload register - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the ARR Preload Bit */ - TIMx->CR1 |= TIM_CR1_ARPE; - } - else - { - /* Reset the ARR Preload Bit */ - TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_ARPE); - } -} - -/** - * @brief Selects the TIM peripheral Commutation event. - * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral - * @param NewState: new state of the Commutation event. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the COM Bit */ - TIMx->CR2 |= TIM_CR2_CCUS; - } - else - { - /* Reset the COM Bit */ - TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCUS); - } -} - -/** - * @brief Selects the TIMx peripheral Capture Compare DMA source. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select - * the TIM peripheral. - * @param NewState: new state of the Capture Compare DMA source - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST4_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the CCDS Bit */ - TIMx->CR2 |= TIM_CR2_CCDS; - } - else - { - /* Reset the CCDS Bit */ - TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCDS); - } -} - -/** - * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8 or 15 - * to select the TIMx peripheral - * @param NewState: new state of the Capture Compare Preload Control bit - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST5_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the CCPC Bit */ - TIMx->CR2 |= TIM_CR2_CCPC; - } - else - { - /* Reset the CCPC Bit */ - TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCPC); - } -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR1. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC1PE Bit */ - tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1PE); - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr1 |= TIM_OCPreload; - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR2. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select - * the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC2PE Bit */ - tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2PE); - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8); - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR3. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC3PE Bit */ - tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3PE); - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr2 |= TIM_OCPreload; - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR4. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC4PE Bit */ - tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4PE); - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8); - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Configures the TIMx Output Compare 1 Fast feature. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC1FE Bit */ - tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1FE); - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr1 |= TIM_OCFast; - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Configures the TIMx Output Compare 2 Fast feature. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select - * the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC2FE Bit */ - tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2FE); - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr1 |= (uint16_t)(TIM_OCFast << 8); - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Configures the TIMx Output Compare 3 Fast feature. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC3FE Bit */ - tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3FE); - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr2 |= TIM_OCFast; - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Configures the TIMx Output Compare 4 Fast feature. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC4FE Bit */ - tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4FE); - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr2 |= (uint16_t)(TIM_OCFast << 8); - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Clears or safeguards the OCREF1 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1CE Bit */ - tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1CE); - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr1 |= TIM_OCClear; - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Clears or safeguards the OCREF2 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC2CE Bit */ - tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2CE); - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr1 |= (uint16_t)(TIM_OCClear << 8); - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Clears or safeguards the OCREF3 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC3CE Bit */ - tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3CE); - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr2 |= TIM_OCClear; - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Clears or safeguards the OCREF4 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC4CE Bit */ - tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4CE); - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr2 |= (uint16_t)(TIM_OCClear << 8); - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Configures the TIMx channel 1 polarity. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC1 Polarity - * This parameter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - tmpccer = TIMx->CCER; - /* Set or Reset the CC1P Bit */ - tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1P); - tmpccer |= TIM_OCPolarity; - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx Channel 1N polarity. - * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral. - * @param TIM_OCNPolarity: specifies the OC1N Polarity - * This parameter can be one of the following values: - * @arg TIM_OCNPolarity_High: Output Compare active high - * @arg TIM_OCNPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - /* Set or Reset the CC1NP Bit */ - tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1NP); - tmpccer |= TIM_OCNPolarity; - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx channel 2 polarity. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC2 Polarity - * This parameter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - tmpccer = TIMx->CCER; - /* Set or Reset the CC2P Bit */ - tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2P); - tmpccer |= (uint16_t)(TIM_OCPolarity << 4); - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx Channel 2N polarity. - * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. - * @param TIM_OCNPolarity: specifies the OC2N Polarity - * This parameter can be one of the following values: - * @arg TIM_OCNPolarity_High: Output Compare active high - * @arg TIM_OCNPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - /* Set or Reset the CC2NP Bit */ - tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2NP); - tmpccer |= (uint16_t)(TIM_OCNPolarity << 4); - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx channel 3 polarity. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC3 Polarity - * This parameter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - tmpccer = TIMx->CCER; - /* Set or Reset the CC3P Bit */ - tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3P); - tmpccer |= (uint16_t)(TIM_OCPolarity << 8); - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx Channel 3N polarity. - * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. - * @param TIM_OCNPolarity: specifies the OC3N Polarity - * This parameter can be one of the following values: - * @arg TIM_OCNPolarity_High: Output Compare active high - * @arg TIM_OCNPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) -{ - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST1_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - /* Set or Reset the CC3NP Bit */ - tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3NP); - tmpccer |= (uint16_t)(TIM_OCNPolarity << 8); - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx channel 4 polarity. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC4 Polarity - * This parameter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - tmpccer = TIMx->CCER; - /* Set or Reset the CC4P Bit */ - tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC4P); - tmpccer |= (uint16_t)(TIM_OCPolarity << 12); - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel x. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param TIM_Channel: specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_Channel_1: TIM Channel 1 - * @arg TIM_Channel_2: TIM Channel 2 - * @arg TIM_Channel_3: TIM Channel 3 - * @arg TIM_Channel_4: TIM Channel 4 - * @param TIM_CCx: specifies the TIM Channel CCxE bit new state. - * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. - * @retval None - */ -void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx) -{ - uint16_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_CCX(TIM_CCx)); - - tmp = CCER_CCE_Set << TIM_Channel; - - /* Reset the CCxE Bit */ - TIMx->CCER &= (uint16_t)~ tmp; - - /* Set or reset the CCxE Bit */ - TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel); -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel xN. - * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral. - * @param TIM_Channel: specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_Channel_1: TIM Channel 1 - * @arg TIM_Channel_2: TIM Channel 2 - * @arg TIM_Channel_3: TIM Channel 3 - * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state. - * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. - * @retval None - */ -void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN) -{ - uint16_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST2_PERIPH(TIMx)); - assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_CCXN(TIM_CCxN)); - - tmp = CCER_CCNE_Set << TIM_Channel; - - /* Reset the CCxNE Bit */ - TIMx->CCER &= (uint16_t) ~tmp; - - /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel); -} - -/** - * @brief Selects the TIM Output Compare Mode. - * @note This function disables the selected channel before changing the Output - * Compare Mode. - * User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param TIM_Channel: specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_Channel_1: TIM Channel 1 - * @arg TIM_Channel_2: TIM Channel 2 - * @arg TIM_Channel_3: TIM Channel 3 - * @arg TIM_Channel_4: TIM Channel 4 - * @param TIM_OCMode: specifies the TIM Output Compare Mode. - * This parameter can be one of the following values: - * @arg TIM_OCMode_Timing - * @arg TIM_OCMode_Active - * @arg TIM_OCMode_Toggle - * @arg TIM_OCMode_PWM1 - * @arg TIM_OCMode_PWM2 - * @arg TIM_ForcedAction_Active - * @arg TIM_ForcedAction_InActive - * @retval None - */ -void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode) -{ - uint32_t tmp = 0; - uint16_t tmp1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_OCM(TIM_OCMode)); - - tmp = (uint32_t) TIMx; - tmp += CCMR_Offset; - - tmp1 = CCER_CCE_Set << (uint16_t)TIM_Channel; - - /* Disable the Channel: Reset the CCxE Bit */ - TIMx->CCER &= (uint16_t) ~tmp1; - - if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3)) - { - tmp += (TIM_Channel>>1); - - /* Reset the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC1M); - - /* Configure the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp |= TIM_OCMode; - } - else - { - tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1; - - /* Reset the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC2M); - - /* Configure the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8); - } -} - -/** - * @brief Enables or Disables the TIMx Update event. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param NewState: new state of the TIMx UDIS bit - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the Update Disable Bit */ - TIMx->CR1 |= TIM_CR1_UDIS; - } - else - { - /* Reset the Update Disable Bit */ - TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_UDIS); - } -} - -/** - * @brief Configures the TIMx Update Request Interrupt source. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param TIM_UpdateSource: specifies the Update source. - * This parameter can be one of the following values: - * @arg TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow - or the setting of UG bit, or an update generation - through the slave mode controller. - * @arg TIM_UpdateSource_Global: Source of update is counter overflow/underflow. - * @retval None - */ -void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); - if (TIM_UpdateSource != TIM_UpdateSource_Global) - { - /* Set the URS Bit */ - TIMx->CR1 |= TIM_CR1_URS; - } - else - { - /* Reset the URS Bit */ - TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_URS); - } -} - -/** - * @brief Enables or disables the TIMx's Hall sensor interface. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param NewState: new state of the TIMx Hall sensor interface. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the TI1S Bit */ - TIMx->CR2 |= TIM_CR2_TI1S; - } - else - { - /* Reset the TI1S Bit */ - TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_TI1S); - } -} - -/** - * @brief Selects the TIMx's One Pulse Mode. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param TIM_OPMode: specifies the OPM Mode to be used. - * This parameter can be one of the following values: - * @arg TIM_OPMode_Single - * @arg TIM_OPMode_Repetitive - * @retval None - */ -void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_OPM_MODE(TIM_OPMode)); - /* Reset the OPM Bit */ - TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_OPM); - /* Configure the OPM Mode */ - TIMx->CR1 |= TIM_OPMode; -} - -/** - * @brief Selects the TIMx Trigger Output Mode. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_TRGOSource: specifies the Trigger Output source. - * This paramter can be one of the following values: - * - * - For all TIMx - * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output (TRGO). - * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO). - * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO). - * - * - For all TIMx except TIM6 and TIM7 - * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag - * is to be set, as soon as a capture or compare match occurs (TRGO). - * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO). - * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO). - * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO). - * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO). - * - * @retval None - */ -void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST7_PERIPH(TIMx)); - assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); - /* Reset the MMS Bits */ - TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_MMS); - /* Select the TRGO source */ - TIMx->CR2 |= TIM_TRGOSource; -} - -/** - * @brief Selects the TIMx Slave Mode. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_SlaveMode: specifies the Timer Slave Mode. - * This parameter can be one of the following values: - * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes - * the counter and triggers an update of the registers. - * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high. - * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI. - * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter. - * @retval None - */ -void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); - /* Reset the SMS Bits */ - TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_SMS); - /* Select the Slave Mode */ - TIMx->SMCR |= TIM_SlaveMode; -} - -/** - * @brief Sets or Resets the TIMx Master/Slave Mode. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. - * This parameter can be one of the following values: - * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer - * and its slaves (through TRGO). - * @arg TIM_MasterSlaveMode_Disable: No action - * @retval None - */ -void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); - /* Reset the MSM Bit */ - TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_MSM); - - /* Set or Reset the MSM Bit */ - TIMx->SMCR |= TIM_MasterSlaveMode; -} - -/** - * @brief Sets the TIMx Counter Register value - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param Counter: specifies the Counter register new value. - * @retval None - */ -void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - /* Set the Counter Register value */ - TIMx->CNT = Counter; -} - -/** - * @brief Sets the TIMx Autoreload Register value - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param Autoreload: specifies the Autoreload register new value. - * @retval None - */ -void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - /* Set the Autoreload Register value */ - TIMx->ARR = Autoreload; -} - -/** - * @brief Sets the TIMx Capture Compare1 Register value - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param Compare1: specifies the Capture Compare1 register new value. - * @retval None - */ -void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - /* Set the Capture Compare1 Register value */ - TIMx->CCR1 = Compare1; -} - -/** - * @brief Sets the TIMx Capture Compare2 Register value - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. - * @param Compare2: specifies the Capture Compare2 register new value. - * @retval None - */ -void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - /* Set the Capture Compare2 Register value */ - TIMx->CCR2 = Compare2; -} - -/** - * @brief Sets the TIMx Capture Compare3 Register value - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param Compare3: specifies the Capture Compare3 register new value. - * @retval None - */ -void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - /* Set the Capture Compare3 Register value */ - TIMx->CCR3 = Compare3; -} - -/** - * @brief Sets the TIMx Capture Compare4 Register value - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param Compare4: specifies the Capture Compare4 register new value. - * @retval None - */ -void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - /* Set the Capture Compare4 Register value */ - TIMx->CCR4 = Compare4; -} - -/** - * @brief Sets the TIMx Input Capture 1 prescaler. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - /* Reset the IC1PSC Bits */ - TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC1PSC); - /* Set the IC1PSC value */ - TIMx->CCMR1 |= TIM_ICPSC; -} - -/** - * @brief Sets the TIMx Input Capture 2 prescaler. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - /* Reset the IC2PSC Bits */ - TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC2PSC); - /* Set the IC2PSC value */ - TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8); -} - -/** - * @brief Sets the TIMx Input Capture 3 prescaler. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - /* Reset the IC3PSC Bits */ - TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC3PSC); - /* Set the IC3PSC value */ - TIMx->CCMR2 |= TIM_ICPSC; -} - -/** - * @brief Sets the TIMx Input Capture 4 prescaler. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - /* Reset the IC4PSC Bits */ - TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC4PSC); - /* Set the IC4PSC value */ - TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8); -} - -/** - * @brief Sets the TIMx Clock Division value. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select - * the TIM peripheral. - * @param TIM_CKD: specifies the clock division value. - * This parameter can be one of the following value: - * @arg TIM_CKD_DIV1: TDTS = Tck_tim - * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim - * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim - * @retval None - */ -void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - assert_param(IS_TIM_CKD_DIV(TIM_CKD)); - /* Reset the CKD Bits */ - TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_CKD); - /* Set the CKD value */ - TIMx->CR1 |= TIM_CKD; -} - -/** - * @brief Gets the TIMx Input Capture 1 value. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @retval Capture Compare 1 Register value. - */ -uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST8_PERIPH(TIMx)); - /* Get the Capture 1 Register value */ - return TIMx->CCR1; -} - -/** - * @brief Gets the TIMx Input Capture 2 value. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. - * @retval Capture Compare 2 Register value. - */ -uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST6_PERIPH(TIMx)); - /* Get the Capture 2 Register value */ - return TIMx->CCR2; -} - -/** - * @brief Gets the TIMx Input Capture 3 value. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @retval Capture Compare 3 Register value. - */ -uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - /* Get the Capture 3 Register value */ - return TIMx->CCR3; -} - -/** - * @brief Gets the TIMx Input Capture 4 value. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @retval Capture Compare 4 Register value. - */ -uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_LIST3_PERIPH(TIMx)); - /* Get the Capture 4 Register value */ - return TIMx->CCR4; -} - -/** - * @brief Gets the TIMx Counter value. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @retval Counter Register value. - */ -uint16_t TIM_GetCounter(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - /* Get the Counter Register value */ - return TIMx->CNT; -} - -/** - * @brief Gets the TIMx Prescaler value. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @retval Prescaler Register value. - */ -uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - /* Get the Prescaler Register value */ - return TIMx->PSC; -} - -/** - * @brief Checks whether the specified TIM flag is set or not. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param TIM_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg TIM_FLAG_Update: TIM update Flag - * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag - * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag - * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag - * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag - * @arg TIM_FLAG_COM: TIM Commutation Flag - * @arg TIM_FLAG_Trigger: TIM Trigger Flag - * @arg TIM_FLAG_Break: TIM Break Flag - * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag - * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag - * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag - * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag - * @note - * - TIM6 and TIM7 can have only one update flag. - * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, - * TIM_FLAG_CC2 or TIM_FLAG_Trigger. - * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1. - * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15. - * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. - * @retval The new state of TIM_FLAG (SET or RESET). - */ -FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) -{ - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_GET_FLAG(TIM_FLAG)); - - if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the TIMx's pending flags. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param TIM_FLAG: specifies the flag bit to clear. - * This parameter can be any combination of the following values: - * @arg TIM_FLAG_Update: TIM update Flag - * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag - * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag - * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag - * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag - * @arg TIM_FLAG_COM: TIM Commutation Flag - * @arg TIM_FLAG_Trigger: TIM Trigger Flag - * @arg TIM_FLAG_Break: TIM Break Flag - * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag - * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag - * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag - * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag - * @note - * - TIM6 and TIM7 can have only one update flag. - * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, - * TIM_FLAG_CC2 or TIM_FLAG_Trigger. - * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1. - * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15. - * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. - * @retval None - */ -void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_CLEAR_FLAG(TIM_FLAG)); - - /* Clear the flags */ - TIMx->SR = (uint16_t)~TIM_FLAG; -} - -/** - * @brief Checks whether the TIM interrupt has occurred or not. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param TIM_IT: specifies the TIM interrupt source to check. - * This parameter can be one of the following values: - * @arg TIM_IT_Update: TIM update Interrupt source - * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source - * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source - * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source - * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source - * @arg TIM_IT_COM: TIM Commutation Interrupt source - * @arg TIM_IT_Trigger: TIM Trigger Interrupt source - * @arg TIM_IT_Break: TIM Break Interrupt source - * @note - * - TIM6 and TIM7 can generate only an update interrupt. - * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, - * TIM_IT_CC2 or TIM_IT_Trigger. - * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. - * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. - * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. - * @retval The new state of the TIM_IT(SET or RESET). - */ -ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT) -{ - ITStatus bitstatus = RESET; - uint16_t itstatus = 0x0, itenable = 0x0; - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_GET_IT(TIM_IT)); - - itstatus = TIMx->SR & TIM_IT; - - itenable = TIMx->DIER & TIM_IT; - if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the TIMx's interrupt pending bits. - * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. - * @param TIM_IT: specifies the pending bit to clear. - * This parameter can be any combination of the following values: - * @arg TIM_IT_Update: TIM1 update Interrupt source - * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source - * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source - * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source - * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source - * @arg TIM_IT_COM: TIM Commutation Interrupt source - * @arg TIM_IT_Trigger: TIM Trigger Interrupt source - * @arg TIM_IT_Break: TIM Break Interrupt source - * @note - * - TIM6 and TIM7 can generate only an update interrupt. - * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, - * TIM_IT_CC2 or TIM_IT_Trigger. - * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. - * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. - * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. - * @retval None - */ -void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_IT(TIM_IT)); - /* Clear the IT pending Bit */ - TIMx->SR = (uint16_t)~TIM_IT; -} - -/** - * @brief Configure the TI1 as Input. - * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1. - * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2. - * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr1 = 0, tmpccer = 0; - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC1E); - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - /* Select the Input and set the filter */ - tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC1F))); - tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); - - if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || - (TIMx == TIM4) ||(TIMx == TIM5)) - { - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P)); - tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); - } - else - { - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P | TIM_CCER_CC1NP)); - tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); - } - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI2 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2. - * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1. - * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0; - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC2E); - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - tmp = (uint16_t)(TIM_ICPolarity << 4); - /* Select the Input and set the filter */ - tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC2S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC2F))); - tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12); - tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8); - - if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || - (TIMx == TIM4) ||(TIMx == TIM5)) - { - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P)); - tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E); - } - else - { - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P | TIM_CCER_CC2NP)); - tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC2E); - } - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI3 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3. - * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4. - * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC3E); - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - tmp = (uint16_t)(TIM_ICPolarity << 8); - /* Select the Input and set the filter */ - tmpccmr2 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR2_CC3S)) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC3F))); - tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); - - if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || - (TIMx == TIM4) ||(TIMx == TIM5)) - { - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P)); - tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E); - } - else - { - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC3NP)); - tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC3E); - } - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI4 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4. - * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3. - * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC4E); - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - tmp = (uint16_t)(TIM_ICPolarity << 12); - /* Select the Input and set the filter */ - tmpccmr2 &= (uint16_t)((uint16_t)(~(uint16_t)TIM_CCMR2_CC4S) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC4F))); - tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8); - tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12); - - if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || - (TIMx == TIM4) ||(TIMx == TIM5)) - { - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC4P)); - tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E); - } - else - { - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC4NP)); - tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC4E); - } - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c deleted file mode 100644 index e794eae..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c +++ /dev/null @@ -1,1058 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_usart.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the USART firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_usart.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup USART - * @brief USART driver modules - * @{ - */ - -/** @defgroup USART_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Private_Defines - * @{ - */ - -#define CR1_UE_Set ((uint16_t)0x2000) /*!< USART Enable Mask */ -#define CR1_UE_Reset ((uint16_t)0xDFFF) /*!< USART Disable Mask */ - -#define CR1_WAKE_Mask ((uint16_t)0xF7FF) /*!< USART WakeUp Method Mask */ - -#define CR1_RWU_Set ((uint16_t)0x0002) /*!< USART mute mode Enable Mask */ -#define CR1_RWU_Reset ((uint16_t)0xFFFD) /*!< USART mute mode Enable Mask */ -#define CR1_SBK_Set ((uint16_t)0x0001) /*!< USART Break Character send Mask */ -#define CR1_CLEAR_Mask ((uint16_t)0xE9F3) /*!< USART CR1 Mask */ -#define CR2_Address_Mask ((uint16_t)0xFFF0) /*!< USART address Mask */ - -#define CR2_LINEN_Set ((uint16_t)0x4000) /*!< USART LIN Enable Mask */ -#define CR2_LINEN_Reset ((uint16_t)0xBFFF) /*!< USART LIN Disable Mask */ - -#define CR2_LBDL_Mask ((uint16_t)0xFFDF) /*!< USART LIN Break detection Mask */ -#define CR2_STOP_CLEAR_Mask ((uint16_t)0xCFFF) /*!< USART CR2 STOP Bits Mask */ -#define CR2_CLOCK_CLEAR_Mask ((uint16_t)0xF0FF) /*!< USART CR2 Clock Mask */ - -#define CR3_SCEN_Set ((uint16_t)0x0020) /*!< USART SC Enable Mask */ -#define CR3_SCEN_Reset ((uint16_t)0xFFDF) /*!< USART SC Disable Mask */ - -#define CR3_NACK_Set ((uint16_t)0x0010) /*!< USART SC NACK Enable Mask */ -#define CR3_NACK_Reset ((uint16_t)0xFFEF) /*!< USART SC NACK Disable Mask */ - -#define CR3_HDSEL_Set ((uint16_t)0x0008) /*!< USART Half-Duplex Enable Mask */ -#define CR3_HDSEL_Reset ((uint16_t)0xFFF7) /*!< USART Half-Duplex Disable Mask */ - -#define CR3_IRLP_Mask ((uint16_t)0xFFFB) /*!< USART IrDA LowPower mode Mask */ -#define CR3_CLEAR_Mask ((uint16_t)0xFCFF) /*!< USART CR3 Mask */ - -#define CR3_IREN_Set ((uint16_t)0x0002) /*!< USART IrDA Enable Mask */ -#define CR3_IREN_Reset ((uint16_t)0xFFFD) /*!< USART IrDA Disable Mask */ -#define GTPR_LSB_Mask ((uint16_t)0x00FF) /*!< Guard Time Register LSB Mask */ -#define GTPR_MSB_Mask ((uint16_t)0xFF00) /*!< Guard Time Register MSB Mask */ -#define IT_Mask ((uint16_t)0x001F) /*!< USART Interrupt Mask */ - -/* USART OverSampling-8 Mask */ -#define CR1_OVER8_Set ((u16)0x8000) /* USART OVER8 mode Enable Mask */ -#define CR1_OVER8_Reset ((u16)0x7FFF) /* USART OVER8 mode Disable Mask */ - -/* USART One Bit Sampling Mask */ -#define CR3_ONEBITE_Set ((u16)0x0800) /* USART ONEBITE mode Enable Mask */ -#define CR3_ONEBITE_Reset ((u16)0xF7FF) /* USART ONEBITE mode Disable Mask */ - -/** - * @} - */ - -/** @defgroup USART_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the USARTx peripheral registers to their default reset values. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @retval None - */ -void USART_DeInit(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - if (USARTx == USART1) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); - } - else if (USARTx == USART2) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); - } - else if (USARTx == USART3) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); - } - else if (USARTx == UART4) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); - } - else - { - if (USARTx == UART5) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); - } - } -} - -/** - * @brief Initializes the USARTx peripheral according to the specified - * parameters in the USART_InitStruct . - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_InitStruct: pointer to a USART_InitTypeDef structure - * that contains the configuration information for the specified USART - * peripheral. - * @retval None - */ -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) -{ - uint32_t tmpreg = 0x00, apbclock = 0x00; - uint32_t integerdivider = 0x00; - uint32_t fractionaldivider = 0x00; - uint32_t usartxbase = 0; - RCC_ClocksTypeDef RCC_ClocksStatus; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); - assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); - assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); - assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); - assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); - assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); - /* The hardware flow control is available only for USART1, USART2 and USART3 */ - if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - usartxbase = (uint32_t)USARTx; - -/*---------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = USARTx->CR2; - /* Clear STOP[13:12] bits */ - tmpreg &= CR2_STOP_CLEAR_Mask; - /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ - /* Set STOP[13:12] bits according to USART_StopBits value */ - tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; - - /* Write to USART CR2 */ - USARTx->CR2 = (uint16_t)tmpreg; - -/*---------------------------- USART CR1 Configuration -----------------------*/ - tmpreg = USARTx->CR1; - /* Clear M, PCE, PS, TE and RE bits */ - tmpreg &= CR1_CLEAR_Mask; - /* Configure the USART Word Length, Parity and mode ----------------------- */ - /* Set the M bits according to USART_WordLength value */ - /* Set PCE and PS bits according to USART_Parity value */ - /* Set TE and RE bits according to USART_Mode value */ - tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | - USART_InitStruct->USART_Mode; - /* Write to USART CR1 */ - USARTx->CR1 = (uint16_t)tmpreg; - -/*---------------------------- USART CR3 Configuration -----------------------*/ - tmpreg = USARTx->CR3; - /* Clear CTSE and RTSE bits */ - tmpreg &= CR3_CLEAR_Mask; - /* Configure the USART HFC -------------------------------------------------*/ - /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ - tmpreg |= USART_InitStruct->USART_HardwareFlowControl; - /* Write to USART CR3 */ - USARTx->CR3 = (uint16_t)tmpreg; - -/*---------------------------- USART BRR Configuration -----------------------*/ - /* Configure the USART Baud Rate -------------------------------------------*/ - RCC_GetClocksFreq(&RCC_ClocksStatus); - if (usartxbase == USART1_BASE) - { - apbclock = RCC_ClocksStatus.PCLK2_Frequency; - } - else - { - apbclock = RCC_ClocksStatus.PCLK1_Frequency; - } - - /* Determine the integer part */ - if ((USARTx->CR1 & CR1_OVER8_Set) != 0) - { - /* Integer part computing in case Oversampling mode is 8 Samples */ - integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate))); - } - else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ - { - /* Integer part computing in case Oversampling mode is 16 Samples */ - integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate))); - } - tmpreg = (integerdivider / 100) << 4; - - /* Determine the fractional part */ - fractionaldivider = integerdivider - (100 * (tmpreg >> 4)); - - /* Implement the fractional part in the register */ - if ((USARTx->CR1 & CR1_OVER8_Set) != 0) - { - tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07); - } - else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ - { - tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F); - } - - /* Write to USART BRR */ - USARTx->BRR = (uint16_t)tmpreg; -} - -/** - * @brief Fills each USART_InitStruct member with its default value. - * @param USART_InitStruct: pointer to a USART_InitTypeDef structure - * which will be initialized. - * @retval None - */ -void USART_StructInit(USART_InitTypeDef* USART_InitStruct) -{ - /* USART_InitStruct members default value */ - USART_InitStruct->USART_BaudRate = 9600; - USART_InitStruct->USART_WordLength = USART_WordLength_8b; - USART_InitStruct->USART_StopBits = USART_StopBits_1; - USART_InitStruct->USART_Parity = USART_Parity_No ; - USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; -} - -/** - * @brief Initializes the USARTx peripheral Clock according to the - * specified parameters in the USART_ClockInitStruct . - * @param USARTx: where x can be 1, 2, 3 to select the USART peripheral. - * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef - * structure that contains the configuration information for the specified - * USART peripheral. - * @note The Smart Card and Synchronous modes are not available for UART4 and UART5. - * @retval None - */ -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) -{ - uint32_t tmpreg = 0x00; - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); - assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); - assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); - assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); - -/*---------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = USARTx->CR2; - /* Clear CLKEN, CPOL, CPHA and LBCL bits */ - tmpreg &= CR2_CLOCK_CLEAR_Mask; - /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ - /* Set CLKEN bit according to USART_Clock value */ - /* Set CPOL bit according to USART_CPOL value */ - /* Set CPHA bit according to USART_CPHA value */ - /* Set LBCL bit according to USART_LastBit value */ - tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | - USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; - /* Write to USART CR2 */ - USARTx->CR2 = (uint16_t)tmpreg; -} - -/** - * @brief Fills each USART_ClockInitStruct member with its default value. - * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef - * structure which will be initialized. - * @retval None - */ -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) -{ - /* USART_ClockInitStruct members default value */ - USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; - USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; - USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; - USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; -} - -/** - * @brief Enables or disables the specified USART peripheral. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the USARTx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected USART by setting the UE bit in the CR1 register */ - USARTx->CR1 |= CR1_UE_Set; - } - else - { - /* Disable the selected USART by clearing the UE bit in the CR1 register */ - USARTx->CR1 &= CR1_UE_Reset; - } -} - -/** - * @brief Enables or disables the specified USART interrupts. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled. - * This parameter can be one of the following values: - * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg USART_IT_LBD: LIN Break detection interrupt - * @arg USART_IT_TXE: Transmit Data Register empty interrupt - * @arg USART_IT_TC: Transmission complete interrupt - * @arg USART_IT_RXNE: Receive Data register not empty interrupt - * @arg USART_IT_IDLE: Idle line detection interrupt - * @arg USART_IT_PE: Parity Error interrupt - * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @param NewState: new state of the specified USARTx interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState) -{ - uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00; - uint32_t usartxbase = 0x00; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CONFIG_IT(USART_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - /* The CTS interrupt is not available for UART4 and UART5 */ - if (USART_IT == USART_IT_CTS) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - usartxbase = (uint32_t)USARTx; - - /* Get the USART register index */ - usartreg = (((uint8_t)USART_IT) >> 0x05); - - /* Get the interrupt position */ - itpos = USART_IT & IT_Mask; - itmask = (((uint32_t)0x01) << itpos); - - if (usartreg == 0x01) /* The IT is in CR1 register */ - { - usartxbase += 0x0C; - } - else if (usartreg == 0x02) /* The IT is in CR2 register */ - { - usartxbase += 0x10; - } - else /* The IT is in CR3 register */ - { - usartxbase += 0x14; - } - if (NewState != DISABLE) - { - *(__IO uint32_t*)usartxbase |= itmask; - } - else - { - *(__IO uint32_t*)usartxbase &= ~itmask; - } -} - -/** - * @brief Enables or disables the USART’s DMA interface. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_DMAReq: specifies the DMA request. - * This parameter can be any combination of the following values: - * @arg USART_DMAReq_Tx: USART DMA transmit request - * @arg USART_DMAReq_Rx: USART DMA receive request - * @param NewState: new state of the DMA Request sources. - * This parameter can be: ENABLE or DISABLE. - * @note The DMA mode is not available for UART5 except in the STM32 - * High density value line devices(STM32F10X_HD_VL). - * @retval None - */ -void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_DMAREQ(USART_DMAReq)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the DMA transfer for selected requests by setting the DMAT and/or - DMAR bits in the USART CR3 register */ - USARTx->CR3 |= USART_DMAReq; - } - else - { - /* Disable the DMA transfer for selected requests by clearing the DMAT and/or - DMAR bits in the USART CR3 register */ - USARTx->CR3 &= (uint16_t)~USART_DMAReq; - } -} - -/** - * @brief Sets the address of the USART node. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_Address: Indicates the address of the USART node. - * @retval None - */ -void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_ADDRESS(USART_Address)); - - /* Clear the USART address */ - USARTx->CR2 &= CR2_Address_Mask; - /* Set the USART address node */ - USARTx->CR2 |= USART_Address; -} - -/** - * @brief Selects the USART WakeUp method. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_WakeUp: specifies the USART wakeup method. - * This parameter can be one of the following values: - * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection - * @arg USART_WakeUp_AddressMark: WakeUp by an address mark - * @retval None - */ -void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_WAKEUP(USART_WakeUp)); - - USARTx->CR1 &= CR1_WAKE_Mask; - USARTx->CR1 |= USART_WakeUp; -} - -/** - * @brief Determines if the USART is in mute mode or not. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the USART mute mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ - USARTx->CR1 |= CR1_RWU_Set; - } - else - { - /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ - USARTx->CR1 &= CR1_RWU_Reset; - } -} - -/** - * @brief Sets the USART LIN Break detection length. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_LINBreakDetectLength: specifies the LIN break detection length. - * This parameter can be one of the following values: - * @arg USART_LINBreakDetectLength_10b: 10-bit break detection - * @arg USART_LINBreakDetectLength_11b: 11-bit break detection - * @retval None - */ -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); - - USARTx->CR2 &= CR2_LBDL_Mask; - USARTx->CR2 |= USART_LINBreakDetectLength; -} - -/** - * @brief Enables or disables the USART’s LIN mode. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the USART LIN mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ - USARTx->CR2 |= CR2_LINEN_Set; - } - else - { - /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ - USARTx->CR2 &= CR2_LINEN_Reset; - } -} - -/** - * @brief Transmits single data through the USARTx peripheral. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param Data: the data to transmit. - * @retval None - */ -void USART_SendData(USART_TypeDef* USARTx, uint16_t Data) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_DATA(Data)); - - /* Transmit Data */ - USARTx->DR = (Data & (uint16_t)0x01FF); -} - -/** - * @brief Returns the most recent received data by the USARTx peripheral. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @retval The received data. - */ -uint16_t USART_ReceiveData(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Receive Data */ - return (uint16_t)(USARTx->DR & (uint16_t)0x01FF); -} - -/** - * @brief Transmits break characters. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @retval None - */ -void USART_SendBreak(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Send break characters */ - USARTx->CR1 |= CR1_SBK_Set; -} - -/** - * @brief Sets the specified USART guard time. - * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. - * @param USART_GuardTime: specifies the guard time. - * @note The guard time bits are not available for UART4 and UART5. - * @retval None - */ -void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - - /* Clear the USART Guard time */ - USARTx->GTPR &= GTPR_LSB_Mask; - /* Set the USART guard time */ - USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); -} - -/** - * @brief Sets the system clock prescaler. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_Prescaler: specifies the prescaler clock. - * @note The function is used for IrDA mode with UART4 and UART5. - * @retval None - */ -void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Clear the USART prescaler */ - USARTx->GTPR &= GTPR_MSB_Mask; - /* Set the USART prescaler */ - USARTx->GTPR |= USART_Prescaler; -} - -/** - * @brief Enables or disables the USART’s Smart Card mode. - * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. - * @param NewState: new state of the Smart Card mode. - * This parameter can be: ENABLE or DISABLE. - * @note The Smart Card mode is not available for UART4 and UART5. - * @retval None - */ -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the SC mode by setting the SCEN bit in the CR3 register */ - USARTx->CR3 |= CR3_SCEN_Set; - } - else - { - /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ - USARTx->CR3 &= CR3_SCEN_Reset; - } -} - -/** - * @brief Enables or disables NACK transmission. - * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. - * @param NewState: new state of the NACK transmission. - * This parameter can be: ENABLE or DISABLE. - * @note The Smart Card mode is not available for UART4 and UART5. - * @retval None - */ -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ - USARTx->CR3 |= CR3_NACK_Set; - } - else - { - /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ - USARTx->CR3 &= CR3_NACK_Reset; - } -} - -/** - * @brief Enables or disables the USART’s Half Duplex communication. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the USART Communication. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ - USARTx->CR3 |= CR3_HDSEL_Set; - } - else - { - /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ - USARTx->CR3 &= CR3_HDSEL_Reset; - } -} - - -/** - * @brief Enables or disables the USART's 8x oversampling mode. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the USART one bit sampling method. - * This parameter can be: ENABLE or DISABLE. - * @note - * This function has to be called before calling USART_Init() - * function in order to have correct baudrate Divider value. - * @retval None - */ -void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */ - USARTx->CR1 |= CR1_OVER8_Set; - } - else - { - /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */ - USARTx->CR1 &= CR1_OVER8_Reset; - } -} - -/** - * @brief Enables or disables the USART's one bit sampling method. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the USART one bit sampling method. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */ - USARTx->CR3 |= CR3_ONEBITE_Set; - } - else - { - /* Disable tthe one bit method by clearing the ONEBITE bit in the CR3 register */ - USARTx->CR3 &= CR3_ONEBITE_Reset; - } -} - -/** - * @brief Configures the USART's IrDA interface. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_IrDAMode: specifies the IrDA mode. - * This parameter can be one of the following values: - * @arg USART_IrDAMode_LowPower - * @arg USART_IrDAMode_Normal - * @retval None - */ -void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); - - USARTx->CR3 &= CR3_IRLP_Mask; - USARTx->CR3 |= USART_IrDAMode; -} - -/** - * @brief Enables or disables the USART's IrDA interface. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the IrDA mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ - USARTx->CR3 |= CR3_IREN_Set; - } - else - { - /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ - USARTx->CR3 &= CR3_IREN_Reset; - } -} - -/** - * @brief Checks whether the specified USART flag is set or not. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) - * @arg USART_FLAG_LBD: LIN Break detection flag - * @arg USART_FLAG_TXE: Transmit data register empty flag - * @arg USART_FLAG_TC: Transmission Complete flag - * @arg USART_FLAG_RXNE: Receive data register not empty flag - * @arg USART_FLAG_IDLE: Idle Line detection flag - * @arg USART_FLAG_ORE: OverRun Error flag - * @arg USART_FLAG_NE: Noise Error flag - * @arg USART_FLAG_FE: Framing Error flag - * @arg USART_FLAG_PE: Parity Error flag - * @retval The new state of USART_FLAG (SET or RESET). - */ -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_FLAG(USART_FLAG)); - /* The CTS flag is not available for UART4 and UART5 */ - if (USART_FLAG == USART_FLAG_CTS) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the USARTx's pending flags. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). - * @arg USART_FLAG_LBD: LIN Break detection flag. - * @arg USART_FLAG_TC: Transmission Complete flag. - * @arg USART_FLAG_RXNE: Receive data register not empty flag. - * - * @note - * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun - * error) and IDLE (Idle line detected) flags are cleared by software - * sequence: a read operation to USART_SR register (USART_GetFlagStatus()) - * followed by a read operation to USART_DR register (USART_ReceiveData()). - * - RXNE flag can be also cleared by a read to the USART_DR register - * (USART_ReceiveData()). - * - TC flag can be also cleared by software sequence: a read operation to - * USART_SR register (USART_GetFlagStatus()) followed by a write operation - * to USART_DR register (USART_SendData()). - * - TXE flag is cleared only by a write to the USART_DR register - * (USART_SendData()). - * @retval None - */ -void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); - /* The CTS flag is not available for UART4 and UART5 */ - if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - USARTx->SR = (uint16_t)~USART_FLAG; -} - -/** - * @brief Checks whether the specified USART interrupt has occurred or not. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_IT: specifies the USART interrupt source to check. - * This parameter can be one of the following values: - * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg USART_IT_LBD: LIN Break detection interrupt - * @arg USART_IT_TXE: Tansmit Data Register empty interrupt - * @arg USART_IT_TC: Transmission complete interrupt - * @arg USART_IT_RXNE: Receive Data register not empty interrupt - * @arg USART_IT_IDLE: Idle line detection interrupt - * @arg USART_IT_ORE: OverRun Error interrupt - * @arg USART_IT_NE: Noise Error interrupt - * @arg USART_IT_FE: Framing Error interrupt - * @arg USART_IT_PE: Parity Error interrupt - * @retval The new state of USART_IT (SET or RESET). - */ -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT) -{ - uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00; - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_GET_IT(USART_IT)); - /* The CTS interrupt is not available for UART4 and UART5 */ - if (USART_IT == USART_IT_CTS) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - /* Get the USART register index */ - usartreg = (((uint8_t)USART_IT) >> 0x05); - /* Get the interrupt position */ - itmask = USART_IT & IT_Mask; - itmask = (uint32_t)0x01 << itmask; - - if (usartreg == 0x01) /* The IT is in CR1 register */ - { - itmask &= USARTx->CR1; - } - else if (usartreg == 0x02) /* The IT is in CR2 register */ - { - itmask &= USARTx->CR2; - } - else /* The IT is in CR3 register */ - { - itmask &= USARTx->CR3; - } - - bitpos = USART_IT >> 0x08; - bitpos = (uint32_t)0x01 << bitpos; - bitpos &= USARTx->SR; - if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - return bitstatus; -} - -/** - * @brief Clears the USARTx's interrupt pending bits. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_IT: specifies the interrupt pending bit to clear. - * This parameter can be one of the following values: - * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg USART_IT_LBD: LIN Break detection interrupt - * @arg USART_IT_TC: Transmission complete interrupt. - * @arg USART_IT_RXNE: Receive Data register not empty interrupt. - * - * @note - * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun - * error) and IDLE (Idle line detected) pending bits are cleared by - * software sequence: a read operation to USART_SR register - * (USART_GetITStatus()) followed by a read operation to USART_DR register - * (USART_ReceiveData()). - * - RXNE pending bit can be also cleared by a read to the USART_DR register - * (USART_ReceiveData()). - * - TC pending bit can be also cleared by software sequence: a read - * operation to USART_SR register (USART_GetITStatus()) followed by a write - * operation to USART_DR register (USART_SendData()). - * - TXE pending bit is cleared only by a write to the USART_DR register - * (USART_SendData()). - * @retval None - */ -void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT) -{ - uint16_t bitpos = 0x00, itmask = 0x00; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CLEAR_IT(USART_IT)); - /* The CTS interrupt is not available for UART4 and UART5 */ - if (USART_IT == USART_IT_CTS) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - bitpos = USART_IT >> 0x08; - itmask = ((uint16_t)0x01 << (uint16_t)bitpos); - USARTx->SR = (uint16_t)~itmask; -} -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c deleted file mode 100644 index 4a901e4..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c +++ /dev/null @@ -1,224 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_wwdg.c - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file provides all the WWDG firmware functions. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_wwdg.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup WWDG - * @brief WWDG driver modules - * @{ - */ - -/** @defgroup WWDG_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup WWDG_Private_Defines - * @{ - */ - -/* ----------- WWDG registers bit address in the alias region ----------- */ -#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE) - -/* Alias word address of EWI bit */ -#define CFR_OFFSET (WWDG_OFFSET + 0x04) -#define EWI_BitNumber 0x09 -#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4)) - -/* --------------------- WWDG registers bit mask ------------------------ */ - -/* CR register bit mask */ -#define CR_WDGA_Set ((uint32_t)0x00000080) - -/* CFR register bit mask */ -#define CFR_WDGTB_Mask ((uint32_t)0xFFFFFE7F) -#define CFR_W_Mask ((uint32_t)0xFFFFFF80) -#define BIT_Mask ((uint8_t)0x7F) - -/** - * @} - */ - -/** @defgroup WWDG_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup WWDG_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup WWDG_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup WWDG_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the WWDG peripheral registers to their default reset values. - * @param None - * @retval None - */ -void WWDG_DeInit(void) -{ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE); -} - -/** - * @brief Sets the WWDG Prescaler. - * @param WWDG_Prescaler: specifies the WWDG Prescaler. - * This parameter can be one of the following values: - * @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1 - * @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2 - * @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4 - * @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8 - * @retval None - */ -void WWDG_SetPrescaler(uint32_t WWDG_Prescaler) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler)); - /* Clear WDGTB[1:0] bits */ - tmpreg = WWDG->CFR & CFR_WDGTB_Mask; - /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */ - tmpreg |= WWDG_Prescaler; - /* Store the new value */ - WWDG->CFR = tmpreg; -} - -/** - * @brief Sets the WWDG window value. - * @param WindowValue: specifies the window value to be compared to the downcounter. - * This parameter value must be lower than 0x80. - * @retval None - */ -void WWDG_SetWindowValue(uint8_t WindowValue) -{ - __IO uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_WWDG_WINDOW_VALUE(WindowValue)); - /* Clear W[6:0] bits */ - - tmpreg = WWDG->CFR & CFR_W_Mask; - - /* Set W[6:0] bits according to WindowValue value */ - tmpreg |= WindowValue & (uint32_t) BIT_Mask; - - /* Store the new value */ - WWDG->CFR = tmpreg; -} - -/** - * @brief Enables the WWDG Early Wakeup interrupt(EWI). - * @param None - * @retval None - */ -void WWDG_EnableIT(void) -{ - *(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE; -} - -/** - * @brief Sets the WWDG counter value. - * @param Counter: specifies the watchdog counter value. - * This parameter must be a number between 0x40 and 0x7F. - * @retval None - */ -void WWDG_SetCounter(uint8_t Counter) -{ - /* Check the parameters */ - assert_param(IS_WWDG_COUNTER(Counter)); - /* Write to T[6:0] bits to configure the counter value, no need to do - a read-modify-write; writing a 0 to WDGA bit does nothing */ - WWDG->CR = Counter & BIT_Mask; -} - -/** - * @brief Enables WWDG and load the counter value. - * @param Counter: specifies the watchdog counter value. - * This parameter must be a number between 0x40 and 0x7F. - * @retval None - */ -void WWDG_Enable(uint8_t Counter) -{ - /* Check the parameters */ - assert_param(IS_WWDG_COUNTER(Counter)); - WWDG->CR = CR_WDGA_Set | Counter; -} - -/** - * @brief Checks whether the Early Wakeup interrupt flag is set or not. - * @param None - * @retval The new state of the Early Wakeup interrupt flag (SET or RESET) - */ -FlagStatus WWDG_GetFlagStatus(void) -{ - return (FlagStatus)(WWDG->SR); -} - -/** - * @brief Clears Early Wakeup interrupt flag. - * @param None - * @retval None - */ -void WWDG_ClearFlag(void) -{ - WWDG->SR = (uint32_t)RESET; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |