o Moving tinyprintf and stm libraries under thirdparty.

13 files changed, 0 insertions, 1053 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/EWARM/stm32f10x_flash_offset.icf b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/EWARM/stm32f10x_flash_offset.icf
deleted file mode 100644
index 1efdb2b..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/EWARM/stm32f10x_flash_offset.icf
+++ /dev/null
@@ -1,31 +0,0 @@
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x08003000;
-/*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__   = 0x08003000 ;
-define symbol __ICFEDIT_region_ROM_end__     = 0x080FFFFF;
-define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
-define symbol __ICFEDIT_region_RAM_end__     = 0x20017FFF;
-/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__   = 0x400;
-define symbol __ICFEDIT_size_heap__     = 0x200;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
-
-define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
-define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
-
-initialize by copy { readwrite };
-do not initialize  { section .noinit };
-
-place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100B-EVAL/STM32F10x_offset.lsl b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100B-EVAL/STM32F10x_offset.lsl
deleted file mode 100644
index a3adbc0..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100B-EVAL/STM32F10x_offset.lsl
+++ /dev/null
@@ -1,155 +0,0 @@
-////////////////////////////////////////////////////////////////////////////
-//
-//  File        :  stm32f103_cmsis.lsl
-//
-//  Version     :  @(#)stm32f103_cmsis.lsl      1.2  09/06/04
-//
-//  Description :  LSL file for the STMicroelectronics STM32F103, CMSIS version
-//
-//  Copyright 2009 Altium BV     
-//
-//  NOTE:
-//      This file is derived from cm3.lsl and stm32f103.lsl.
-//      It is assumed that the user works with the ARMv7M architecture.
-//      Other architectures will not work with this lsl file.
-//
-////////////////////////////////////////////////////////////////////////////
-
-//
-// We do not want the vectors as defined in arm_arch.lsl
-//
-#define __NO_DEFAULT_AUTO_VECTORS       1
-#define __NR_OF_VECTORS                 76
-
-
-#ifndef __STACK
-#  define __STACK                       8k
-#endif
-#ifndef __HEAP
-#  define __HEAP                        2k
-#endif
-#ifndef __VECTOR_TABLE_ROM_ADDR
-#  define __VECTOR_TABLE_ROM_ADDR       0x08003000
-#endif
-#ifndef __XVWBUF
-#define __XVWBUF                        256             /* buffer used by CrossView */
-#endif
-
-#include <arm_arch.lsl>
-
-////////////////////////////////////////////////////////////////////////////
-//
-// In the STM32F10x, 3 different boot modes can be selected
-// - User Flash memory is selected as boot space
-// - SystemMemory is selected as boot space
-// - Embedded SRAM is selected as boot space
-//
-// This aliases the physical memory associated with each boot mode to Block
-// 000 (0x00000000 boot memory). Even when aliased in the boot memory space,
-// the related memory (Flash memory or SRAM) is still accessible at its
-// original memory space.
-//
-// If no memory is defined yet use the following memory settings
-//
-#ifndef __MEMORY
-
-memory stm32f103flash
-{
-    mau = 8;
-    type = rom;
-    size = 120k;
-    map ( size = 120k, dest_offset=0x08003000, dest=bus:ARM:local_bus);
-}
-
-memory stm32f103ram
-{
-    mau = 8;
-    type = ram;
-    size = 8k;
-    map ( size = 8k, dest_offset=0x20000000, dest=bus:ARM:local_bus);
-}
-
-#endif /* __MEMORY */
-
-section_layout ::linear
-{
-	group( contiguous )
-	{
-		select ".bss.stack";
-		select "stack";
-	}
-}
-
-
-//
-// Custom vector table defines interrupts according to CMSIS standard
-//
-# if defined(__CPU_ARMV7M__)
-section_setup ::linear
-{
-                // vector table with handler addresses
-                vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_ROM_ADDR,
-                                              template = ".text.handler_address",
-                                              template_symbol = "_lc_vector_handler",
-                                              vector_prefix = "_vector_",
-                                              fill = loop,
-                                              no_inline
-                                            )
-                {
-                        vector ( id = 0, fill = "_stacklabel" ); // FIXME: "_lc_ub_stack" does not work
-                        vector ( id = 1, fill = "_START" );
-                        vector ( id = 2, optional, fill = "NMI_Handler" );
-                        vector ( id = 3, optional, fill = "HardFault_Handler" );
-                        vector ( id = 4, optional, fill = "MemManage_Handler" );
-                        vector ( id = 5, optional, fill = "BusFault_Handler" );
-                        vector ( id = 6, optional, fill = "UsageFault_Handler" );
-                        vector ( id = 11, optional, fill = "SVC_Handler" );
-                        vector ( id = 12, optional, fill = "DebugMon_Handler" );
-                        vector ( id = 14, optional, fill = "PendSV_Handler" );
-                        vector ( id = 15, optional, fill = "SysTick_Handler" );
-
-                        // External Interrupts :
-                        vector ( id = 16, optional, fill = "WWDG_IRQHandler" );                 // Window Watchdog
-                        vector ( id = 17, optional, fill = "PVD_IRQHandler" );                  // PVD through EXTI Line detect
-                        vector ( id = 18, optional, fill = "TAMPER_IRQHandler" );               // Tamper
-                        vector ( id = 19, optional, fill = "RTC_IRQHandler" );                  // RTC
-                        vector ( id = 20, optional, fill = "FLASH_IRQHandler" );                // Flash
-                        vector ( id = 21, optional, fill = "RCC_IRQHandler" );                  // RCC
-                        vector ( id = 22, optional, fill = "EXTI0_IRQHandler" );                // EXTI Line 0
-                        vector ( id = 23, optional, fill = "EXTI1_IRQHandler" );                // EXTI Line 1
-                        vector ( id = 24, optional, fill = "EXTI2_IRQHandler" );                // EXTI Line 2
-                        vector ( id = 25, optional, fill = "EXTI3_IRQHandler" );                // EXTI Line 3
-                        vector ( id = 26, optional, fill = "EXTI4_IRQHandler" );                // EXTI Line 4
-                        vector ( id = 27, optional, fill = "DMA1_Channel1_IRQHandler" );        // DMA Channel 1
-                        vector ( id = 28, optional, fill = "DMA1_Channel2_IRQHandler" );        // DMA Channel 2
-                        vector ( id = 29, optional, fill = "DMA1_Channel3_IRQHandler" );        // DMA Channel 3
-                        vector ( id = 30, optional, fill = "DMA1_Channel4_IRQHandler" );        // DMA Channel 4
-                        vector ( id = 31, optional, fill = "DMA1_Channel5_IRQHandler" );        // DMA Channel 5
-                        vector ( id = 32, optional, fill = "DMA1_Channel6_IRQHandler" );        // DMA Channel 6
-                        vector ( id = 33, optional, fill = "DMA1_Channel7_IRQHandler" );        // DMA Channel 7
-                        vector ( id = 34, optional, fill = "ADC1_IRQHandler" );                 // ADC1                        
-                        vector ( id = 39, optional, fill = "EXTI9_5_IRQHandler" );              // EXTI Line 9..5
-                        vector ( id = 40, optional, fill = "TIM1_BRK_TIM15_IRQHandler" );       // TIM1 Break and TIM15
-                        vector ( id = 41, optional, fill = "TIM1_UP_TIM16_IRQHandler" );       // TIM1 Update and TIM16
-                        vector ( id = 42, optional, fill = "TIM1_TRG_COM_TIM17_IRQHandler" );   // TIM1 Trigger and Commutation and TIM17
-                        vector ( id = 43, optional, fill = "TIM1_CC_IRQHandler" );              // TIM1 Capture Compare
-                        vector ( id = 44, optional, fill = "TIM2_IRQHandler" );                 // TIM2
-                        vector ( id = 45, optional, fill = "TIM3_IRQHandler" );                 // TIM3
-                        vector ( id = 46, optional, fill = "TIM4_IRQHandler" );                 // TIM4
-                        vector ( id = 47, optional, fill = "I2C1_EV_IRQHandler" );              // I2C1 Event
-                        vector ( id = 48, optional, fill = "I2C1_ER_IRQHandler" );              // I2C1 Error
-                        vector ( id = 49, optional, fill = "I2C2_EV_IRQHandler" );              // I2C2 Event
-                        vector ( id = 50, optional, fill = "I2C2_ER_IRQHandler" );              // I2C2 Error
-                        vector ( id = 51, optional, fill = "SPI1_IRQHandler" );                 // SPI1
-                        vector ( id = 52, optional, fill = "SPI2_IRQHandler" );                 // SPI2
-                        vector ( id = 53, optional, fill = "USART1_IRQHandler" );               // USART1
-                        vector ( id = 54, optional, fill = "USART2_IRQHandler" );               // USART2
-                        vector ( id = 55, optional, fill = "USART3_IRQHandler" );               // USART3
-                        vector ( id = 56, optional, fill = "EXTI15_10_IRQHandler" );            // EXTI Line 15..10
-                        vector ( id = 57, optional, fill = "RTCAlarm_IRQHandler" );             // RTC Alarm through EXTI Line
-                        vector ( id = 58, optional, fill = "CEC_IRQHandler" );                  // HDMI-CEC                   
-                        vector ( id = 70, optional, fill = "TIM6_DAC_IRQHandler" );             // TIM6 and DAC underrun
-                        vector ( id = 71, optional, fill = "TIM7_IRQHandler" );                 // TIM7
-                }
-}
-# endif
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100B-EVAL/link_offset.lnk b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100B-EVAL/link_offset.lnk
deleted file mode 100644
index 2d9c35c..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100B-EVAL/link_offset.lnk
+++ /dev/null
@@ -1,4 +0,0 @@
--d"./settings/STM32F10x_offset.lsl"
---optimize=0
---map-file-format=2
-$(LinkObjects)
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100E-EVAL/STM32F10x_offset.lsl b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100E-EVAL/STM32F10x_offset.lsl
deleted file mode 100644
index c0c6865..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100E-EVAL/STM32F10x_offset.lsl
+++ /dev/null
@@ -1,168 +0,0 @@
-////////////////////////////////////////////////////////////////////////////
-//
-//  File        :  stm32f103_cmsis.lsl
-//
-//  Version     :  @(#)stm32f103_cmsis.lsl      1.2  09/06/04
-//
-//  Description :  LSL file for the STMicroelectronics STM32F103, CMSIS version
-//
-//  Copyright 2009 Altium BV     
-//
-//  NOTE:
-//      This file is derived from cm3.lsl and stm32f103.lsl.
-//      It is assumed that the user works with the ARMv7M architecture.
-//      Other architectures will not work with this lsl file.
-//
-////////////////////////////////////////////////////////////////////////////
-
-//
-// We do not want the vectors as defined in arm_arch.lsl
-//
-#define __NO_DEFAULT_AUTO_VECTORS       1
-#define __NR_OF_VECTORS                 76
-
-
-#ifndef __STACK
-#  define __STACK                       8k
-#endif
-#ifndef __HEAP
-#  define __HEAP                        2k
-#endif
-#ifndef __VECTOR_TABLE_ROM_ADDR
-#  define __VECTOR_TABLE_ROM_ADDR       0x08003000
-#endif
-#ifndef __XVWBUF
-#define __XVWBUF                        256             /* buffer used by CrossView */
-#endif
-
-#include <arm_arch.lsl>
-
-////////////////////////////////////////////////////////////////////////////
-//
-// In the STM32F10x, 3 different boot modes can be selected
-// - User Flash memory is selected as boot space
-// - SystemMemory is selected as boot space
-// - Embedded SRAM is selected as boot space
-//
-// This aliases the physical memory associated with each boot mode to Block
-// 000 (0x00000000 boot memory). Even when aliased in the boot memory space,
-// the related memory (Flash memory or SRAM) is still accessible at its
-// original memory space.
-//
-// If no memory is defined yet use the following memory settings
-//
-#ifndef __MEMORY
-
-memory stm32f103flash
-{
-    mau = 8;
-    type = rom;
-    size = 504k;
-    map ( size = 504k, dest_offset=0x08003000, dest=bus:ARM:local_bus);
-}
-
-memory stm32f103ram
-{
-    mau = 8;
-    type = ram;
-    size = 32k;
-    map ( size = 32k, dest_offset=0x20000000, dest=bus:ARM:local_bus);
-}
-
-#endif /* __MEMORY */
-
-
-section_layout ::linear
-{
-	group( contiguous )
-	{
-		select ".bss.stack";
-		select "stack";
-	}
-}
-
-
-//
-// Custom vector table defines interrupts according to CMSIS standard
-//
-# if defined(__CPU_ARMV7M__)
-section_setup ::linear
-{
-                // vector table with handler addresses
-                vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_ROM_ADDR,
-                                              template = ".text.handler_address",
-                                              template_symbol = "_lc_vector_handler",
-                                              vector_prefix = "_vector_",
-                                              fill = loop,
-                                              no_inline
-                                            )
-                {
-                        vector ( id = 0, fill = "_stacklabel" ); // FIXME: "_lc_ub_stack" does not work
-                        vector ( id = 1, fill = "_START" );
-                        vector ( id = 2, optional, fill = "NMI_Handler" );
-                        vector ( id = 3, optional, fill = "HardFault_Handler" );
-                        vector ( id = 4, optional, fill = "MemManage_Handler" );
-                        vector ( id = 5, optional, fill = "BusFault_Handler" );
-                        vector ( id = 6, optional, fill = "UsageFault_Handler" );
-                        vector ( id = 11, optional, fill = "SVC_Handler" );
-                        vector ( id = 12, optional, fill = "DebugMon_Handler" );
-                        vector ( id = 14, optional, fill = "PendSV_Handler" );
-                        vector ( id = 15, optional, fill = "SysTick_Handler" );
-
-                        // External Interrupts :
-                        vector ( id = 16, optional, fill = "WWDG_IRQHandler" );                 // Window Watchdog
-                        vector ( id = 17, optional, fill = "PVD_IRQHandler" );                  // PVD through EXTI Line detect
-                        vector ( id = 18, optional, fill = "TAMPER_IRQHandler" );               // Tamper
-                        vector ( id = 19, optional, fill = "RTC_IRQHandler" );                  // RTC
-                        vector ( id = 20, optional, fill = "FLASH_IRQHandler" );                // Flash
-                        vector ( id = 21, optional, fill = "RCC_IRQHandler" );                  // RCC
-                        vector ( id = 22, optional, fill = "EXTI0_IRQHandler" );                // EXTI Line 0
-                        vector ( id = 23, optional, fill = "EXTI1_IRQHandler" );                // EXTI Line 1
-                        vector ( id = 24, optional, fill = "EXTI2_IRQHandler" );                // EXTI Line 2
-                        vector ( id = 25, optional, fill = "EXTI3_IRQHandler" );                // EXTI Line 3
-                        vector ( id = 26, optional, fill = "EXTI4_IRQHandler" );                // EXTI Line 4
-                        vector ( id = 27, optional, fill = "DMA1_Channel1_IRQHandler" );          // DMA Channel 1
-                        vector ( id = 28, optional, fill = "DMA1_Channel2_IRQHandler" );          // DMA Channel 2
-                        vector ( id = 29, optional, fill = "DMA1_Channel3_IRQHandler" );          // DMA Channel 3
-                        vector ( id = 30, optional, fill = "DMA1_Channel4_IRQHandler" );          // DMA Channel 4
-                        vector ( id = 31, optional, fill = "DMA1_Channel5_IRQHandler" );          // DMA Channel 5
-                        vector ( id = 32, optional, fill = "DMA1_Channel6_IRQHandler" );          // DMA Channel 6
-                        vector ( id = 33, optional, fill = "DMA1_Channel7_IRQHandler" );          // DMA Channel 7
-                        vector ( id = 34, optional, fill = "ADC1_IRQHandler" );                   // ADC1 
-                        vector ( id = 39, optional, fill = "EXTI9_5_IRQHandler" );              // EXTI Line 9..5
-                        vector ( id = 40, optional, fill = "TIM1_BRK_TIM15_IRQHandler" );        // TIM1_BRK_TIM15_IRQHandler
-                        vector ( id = 41, optional, fill = "TIM1_UP_TIM16_IRQHandler" );              // TIM1_UP_TIM16_IRQHandler
-                        vector ( id = 42, optional, fill = "TIM1_TRG_COM_TIM17_IRQHandler" );         // TIM1_TRG_COM_TIM17_IRQHandler
-                        vector ( id = 43, optional, fill = "TIM1_CC_IRQHandler" );              // TIM1 Capture Compare
-                        vector ( id = 44, optional, fill = "TIM2_IRQHandler" );                 // TIM2
-                        vector ( id = 45, optional, fill = "TIM3_IRQHandler" );                 // TIM3
-                        vector ( id = 46, optional, fill = "TIM4_IRQHandler" );                 // TIM4
-                        vector ( id = 47, optional, fill = "I2C1_EV_IRQHandler" );              // I2C1 Event
-                        vector ( id = 48, optional, fill = "I2C1_ER_IRQHandler" );              // I2C1 Error
-                        vector ( id = 49, optional, fill = "I2C2_EV_IRQHandler" );              // I2C2 Event
-                        vector ( id = 50, optional, fill = "I2C2_ER_IRQHandler" );              // I2C2 Error
-                        vector ( id = 51, optional, fill = "SPI1_IRQHandler" );                 // SPI1
-                        vector ( id = 52, optional, fill = "SPI2_IRQHandler" );                 // SPI2
-                        vector ( id = 53, optional, fill = "USART1_IRQHandler" );               // USART1
-                        vector ( id = 54, optional, fill = "USART2_IRQHandler" );               // USART2
-                        vector ( id = 55, optional, fill = "USART3_IRQHandler" );               // USART3
-                        vector ( id = 56, optional, fill = "EXTI15_10_IRQHandler" );            // EXTI Line 15..10
-                        vector ( id = 57, optional, fill = "RTCAlarm_IRQHandler" );             // RTC Alarm through EXTI Line
-                        vector ( id = 58, optional, fill = "CEC_IRQHandler" );                 // CEC_IRQHandler
-                        vector ( id = 59, optional, fill = "TIM12_IRQHandler" );             // TIM12_IRQHandler
-                        vector ( id = 60, optional, fill = "TIM13_IRQHandler" );              // TIM13_IRQHandler
-                        vector ( id = 61, optional, fill = "TIM14_IRQHandler" );             // TIM14_IRQHandler
-                        vector ( id = 66, optional, fill = "TIM5_IRQHandler" );                 // TIM5
-                        vector ( id = 67, optional, fill = "SPI3_IRQHandler" );                 // SPI3
-                        vector ( id = 68, optional, fill = "UART4_IRQHandler" );                // UART4
-                        vector ( id = 69, optional, fill = "UART5_IRQHandler" );                // UART5
-                        vector ( id = 70, optional, fill = "TIM6_DAC_IRQHandler" );                 // TIM6_DAC_IRQHandler
-                        vector ( id = 71, optional, fill = "TIM7_IRQHandler" );                 // TIM7
-                        vector ( id = 72, optional, fill = "DMA2_Channel1_IRQHandler" );        // DMA2 Channel1
-                        vector ( id = 73, optional, fill = "DMA2_Channel2_IRQHandler" );        // DMA2 Channel2
-                        vector ( id = 74, optional, fill = "DMA2_Channel3_IRQHandler" );        // DMA2 Channel3
-                        vector ( id = 75, optional, fill = "DMA2_Channel4_5_IRQHandler" );      // DMA2 Channel4 and DMA2 Channel5
-                        vector ( id = 76, optional, fill = "DMA2_Channel5_IRQHandler" );      // DMA2 Channel5
-                }
-}
-# endif
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100E-EVAL/link_offset.lnk b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100E-EVAL/link_offset.lnk
deleted file mode 100644
index 2d9c35c..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM32100E-EVAL/link_offset.lnk
+++ /dev/null
@@ -1,4 +0,0 @@
--d"./settings/STM32F10x_offset.lsl"
---optimize=0
---map-file-format=2
-$(LinkObjects)
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210B-EVAL/STM32F10x_offset.lsl b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210B-EVAL/STM32F10x_offset.lsl
deleted file mode 100644
index 7d95809..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210B-EVAL/STM32F10x_offset.lsl
+++ /dev/null
@@ -1,157 +0,0 @@
-////////////////////////////////////////////////////////////////////////////
-//
-//  File        :  stm32f103_cmsis.lsl
-//
-//  Version     :  @(#)stm32f103_cmsis.lsl      1.2  09/06/04
-//
-//  Description :  LSL file for the STMicroelectronics STM32F103, CMSIS version
-//
-//  Copyright 2009 Altium BV     
-//
-//  NOTE:
-//      This file is derived from cm3.lsl and stm32f103.lsl.
-//      It is assumed that the user works with the ARMv7M architecture.
-//      Other architectures will not work with this lsl file.
-//
-////////////////////////////////////////////////////////////////////////////
-
-//
-// We do not want the vectors as defined in arm_arch.lsl
-//
-#define __NO_DEFAULT_AUTO_VECTORS       1
-#define __NR_OF_VECTORS                 76
-
-
-#ifndef __STACK
-#  define __STACK                       8k
-#endif
-#ifndef __HEAP
-#  define __HEAP                        2k
-#endif
-#ifndef __VECTOR_TABLE_ROM_ADDR
-#  define __VECTOR_TABLE_ROM_ADDR       0x08003000
-#endif
-#ifndef __XVWBUF
-#define __XVWBUF                        256             /* buffer used by CrossView */
-#endif
-
-#include <arm_arch.lsl>
-
-////////////////////////////////////////////////////////////////////////////
-//
-// In the STM32F10x, 3 different boot modes can be selected
-// - User Flash memory is selected as boot space
-// - SystemMemory is selected as boot space
-// - Embedded SRAM is selected as boot space
-//
-// This aliases the physical memory associated with each boot mode to Block
-// 000 (0x00000000 boot memory). Even when aliased in the boot memory space,
-// the related memory (Flash memory or SRAM) is still accessible at its
-// original memory space.
-//
-// If no memory is defined yet use the following memory settings
-//
-#ifndef __MEMORY
-
-memory stm32f103flash
-{
-    mau = 8;
-    type = rom;
-    size = 120k;
-    map ( size = 120k, dest_offset=0x08003000, dest=bus:ARM:local_bus);
-}
-
-memory stm32f103ram
-{
-    mau = 8;
-    type = ram;
-    size = 20k;
-    map ( size = 20k, dest_offset=0x20000000, dest=bus:ARM:local_bus);
-}
-
-#endif /* __MEMORY */
-
-section_layout ::linear
-{
-	group( contiguous )
-	{
-		select ".bss.stack";
-		select "stack";
-	}
-}
-
-
-//
-// Custom vector table defines interrupts according to CMSIS standard
-//
-# if defined(__CPU_ARMV7M__)
-section_setup ::linear
-{
-                // vector table with handler addresses
-                vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_ROM_ADDR,
-                                              template = ".text.handler_address",
-                                              template_symbol = "_lc_vector_handler",
-                                              vector_prefix = "_vector_",
-                                              fill = loop,
-                                              no_inline
-                                            )
-                {
-                        vector ( id = 0, fill = "_stacklabel" ); // FIXME: "_lc_ub_stack" does not work
-                        vector ( id = 1, fill = "_START" );
-                        vector ( id = 2, optional, fill = "NMI_Handler" );
-                        vector ( id = 3, optional, fill = "HardFault_Handler" );
-                        vector ( id = 4, optional, fill = "MemManage_Handler" );
-                        vector ( id = 5, optional, fill = "BusFault_Handler" );
-                        vector ( id = 6, optional, fill = "UsageFault_Handler" );
-                        vector ( id = 11, optional, fill = "SVC_Handler" );
-                        vector ( id = 12, optional, fill = "DebugMon_Handler" );
-                        vector ( id = 14, optional, fill = "PendSV_Handler" );
-                        vector ( id = 15, optional, fill = "SysTick_Handler" );
-
-                        // External Interrupts :
-                        vector ( id = 16, optional, fill = "WWDG_IRQHandler" );                 // Window Watchdog
-                        vector ( id = 17, optional, fill = "PVD_IRQHandler" );                  // PVD through EXTI Line detect
-                        vector ( id = 18, optional, fill = "TAMPER_IRQHandler" );               // Tamper
-                        vector ( id = 19, optional, fill = "RTC_IRQHandler" );                  // RTC
-                        vector ( id = 20, optional, fill = "FLASH_IRQHandler" );                // Flash
-                        vector ( id = 21, optional, fill = "RCC_IRQHandler" );                  // RCC
-                        vector ( id = 22, optional, fill = "EXTI0_IRQHandler" );                // EXTI Line 0
-                        vector ( id = 23, optional, fill = "EXTI1_IRQHandler" );                // EXTI Line 1
-                        vector ( id = 24, optional, fill = "EXTI2_IRQHandler" );                // EXTI Line 2
-                        vector ( id = 25, optional, fill = "EXTI3_IRQHandler" );                // EXTI Line 3
-                        vector ( id = 26, optional, fill = "EXTI4_IRQHandler" );                // EXTI Line 4
-                        vector ( id = 27, optional, fill = "DMA1_Channel1_IRQHandler" );          // DMA Channel 1
-                        vector ( id = 28, optional, fill = "DMA1_Channel2_IRQHandler" );          // DMA Channel 2
-                        vector ( id = 29, optional, fill = "DMA1_Channel3_IRQHandler" );          // DMA Channel 3
-                        vector ( id = 30, optional, fill = "DMA1_Channel4_IRQHandler" );          // DMA Channel 4
-                        vector ( id = 31, optional, fill = "DMA1_Channel5_IRQHandler" );          // DMA Channel 5
-                        vector ( id = 32, optional, fill = "DMA1_Channel6_IRQHandler" );          // DMA Channel 6
-                        vector ( id = 33, optional, fill = "DMA1_Channel7_IRQHandler" );          // DMA Channel 7
-                        vector ( id = 34, optional, fill = "ADC1_2_IRQHandler" );               // ADC1 and ADC2
-                        vector ( id = 35, optional, fill = "USB_HP_CAN1_TX_IRQHandler" );       // USB High Priority or CAN1 TX
-                        vector ( id = 36, optional, fill = "USB_LP_CAN1_RX0_IRQHandler" );       // USB LowPriority or CAN RX0
-                        vector ( id = 37, optional, fill = "CAN1_RX1_IRQHandler" );              // CAN1 RX1
-                        vector ( id = 38, optional, fill = "CAN1_SCE_IRQHandler" );              // CAN1 SCE
-                        vector ( id = 39, optional, fill = "EXTI9_5_IRQHandler" );              // EXTI Line 9..5
-                        vector ( id = 40, optional, fill = "TIM1_BRK_IRQHandler" );             // TIM1 Break
-                        vector ( id = 41, optional, fill = "TIM1_UP_IRQHandler" );              // TIM1 Update
-                        vector ( id = 42, optional, fill = "TIM1_TRG_COM_IRQHandler" );         // TIM1 Trigger and Commutation
-                        vector ( id = 43, optional, fill = "TIM1_CC_IRQHandler" );              // TIM1 Capture Compare
-                        vector ( id = 44, optional, fill = "TIM2_IRQHandler" );                 // TIM2
-                        vector ( id = 45, optional, fill = "TIM3_IRQHandler" );                 // TIM3
-                        vector ( id = 46, optional, fill = "TIM4_IRQHandler" );                 // TIM4
-                        vector ( id = 47, optional, fill = "I2C1_EV_IRQHandler" );              // I2C1 Event
-                        vector ( id = 48, optional, fill = "I2C1_ER_IRQHandler" );              // I2C1 Error
-                        vector ( id = 49, optional, fill = "I2C2_EV_IRQHandler" );              // I2C2 Event
-                        vector ( id = 50, optional, fill = "I2C2_ER_IRQHandler" );              // I2C2 Error
-                        vector ( id = 51, optional, fill = "SPI1_IRQHandler" );                 // SPI1
-                        vector ( id = 52, optional, fill = "SPI2_IRQHandler" );                 // SPI2
-                        vector ( id = 53, optional, fill = "USART1_IRQHandler" );               // USART1
-                        vector ( id = 54, optional, fill = "USART2_IRQHandler" );               // USART2
-                        vector ( id = 55, optional, fill = "USART3_IRQHandler" );               // USART3
-                        vector ( id = 56, optional, fill = "EXTI15_10_IRQHandler" );            // EXTI Line 15..10
-                        vector ( id = 57, optional, fill = "RTCAlarm_IRQHandler" );             // RTC Alarm through EXTI Line
-                        vector ( id = 58, optional, fill = "USBWakeUp_IRQHandler" );            // USB Wakeup from suspend
-                }
-}
-# endif
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210C-EVAL/link_offset.lnk b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210C-EVAL/link_offset.lnk
deleted file mode 100644
index 3f877d3..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210C-EVAL/link_offset.lnk
+++ /dev/null
@@ -1,5 +0,0 @@
--d"./settings/STM32F10x_offset.lsl"
---optimize=0
---map-file-format=2
-$(LinkObjects)
---output=.\Objects\$(Target)
\ No newline at end of file
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210E-EVAL/STM32F10x_offset.lsl b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210E-EVAL/STM32F10x_offset.lsl
deleted file mode 100644
index 65789ce..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210E-EVAL/STM32F10x_offset.lsl
+++ /dev/null
@@ -1,174 +0,0 @@
-////////////////////////////////////////////////////////////////////////////
-//
-//  File        :  stm32f103_cmsis.lsl
-//
-//  Version     :  @(#)stm32f103_cmsis.lsl      1.2  09/06/04
-//
-//  Description :  LSL file for the STMicroelectronics STM32F103, CMSIS version
-//
-//  Copyright 2009 Altium BV     
-//
-//  NOTE:
-//      This file is derived from cm3.lsl and stm32f103.lsl.
-//      It is assumed that the user works with the ARMv7M architecture.
-//      Other architectures will not work with this lsl file.
-//
-////////////////////////////////////////////////////////////////////////////
-
-//
-// We do not want the vectors as defined in arm_arch.lsl
-//
-#define __NO_DEFAULT_AUTO_VECTORS       1
-#define __NR_OF_VECTORS                 76
-
-
-#ifndef __STACK
-#  define __STACK                       8k
-#endif
-#ifndef __HEAP
-#  define __HEAP                        2k
-#endif
-#ifndef __VECTOR_TABLE_ROM_ADDR
-#  define __VECTOR_TABLE_ROM_ADDR       0x08003000
-#endif
-#ifndef __XVWBUF
-#define __XVWBUF                        256             /* buffer used by CrossView */
-#endif
-
-#include <arm_arch.lsl>
-
-////////////////////////////////////////////////////////////////////////////
-//
-// In the STM32F10x, 3 different boot modes can be selected
-// - User Flash memory is selected as boot space
-// - SystemMemory is selected as boot space
-// - Embedded SRAM is selected as boot space
-//
-// This aliases the physical memory associated with each boot mode to Block
-// 000 (0x00000000 boot memory). Even when aliased in the boot memory space,
-// the related memory (Flash memory or SRAM) is still accessible at its
-// original memory space.
-//
-// If no memory is defined yet use the following memory settings
-//
-#ifndef __MEMORY
-
-memory stm32f103flash
-{
-    mau = 8;
-    type = rom;
-    size = 504k;
-    map ( size = 504k, dest_offset=0x08003000, dest=bus:ARM:local_bus);
-}
-
-memory stm32f103ram
-{
-    mau = 8;
-    type = ram;
-    size = 64k;
-    map ( size = 64k, dest_offset=0x20000000, dest=bus:ARM:local_bus);
-}
-
-#endif /* __MEMORY */
-
-section_layout ::linear
-{
-	group( contiguous )
-	{
-		select ".bss.stack";
-		select "stack";
-	}
-}
-
-
-//
-// Custom vector table defines interrupts according to CMSIS standard
-//
-# if defined(__CPU_ARMV7M__)
-section_setup ::linear
-{
-                // vector table with handler addresses
-                vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_ROM_ADDR,
-                                              template = ".text.handler_address",
-                                              template_symbol = "_lc_vector_handler",
-                                              vector_prefix = "_vector_",
-                                              fill = loop,
-                                              no_inline
-                                            )
-                {
-                         vector ( id = 0, fill = "_stacklabel" ); // FIXME: "_lc_ub_stack" does not work
-                        vector ( id = 1, fill = "_START" );
-                        vector ( id = 2, optional, fill = "NMI_Handler" );
-                        vector ( id = 3, optional, fill = "HardFault_Handler" );
-                        vector ( id = 4, optional, fill = "MemManage_Handler" );
-                        vector ( id = 5, optional, fill = "BusFault_Handler" );
-                        vector ( id = 6, optional, fill = "UsageFault_Handler" );
-                        vector ( id = 11, optional, fill = "SVC_Handler" );
-                        vector ( id = 12, optional, fill = "DebugMon_Handler" );
-                        vector ( id = 14, optional, fill = "PendSV_Handler" );
-                        vector ( id = 15, optional, fill = "SysTick_Handler" );
-
-                        // External Interrupts :
-                        vector ( id = 16, optional, fill = "WWDG_IRQHandler" );                 // Window Watchdog
-                        vector ( id = 17, optional, fill = "PVD_IRQHandler" );                  // PVD through EXTI Line detect
-                        vector ( id = 18, optional, fill = "TAMPER_IRQHandler" );               // Tamper
-                        vector ( id = 19, optional, fill = "RTC_IRQHandler" );                  // RTC
-                        vector ( id = 20, optional, fill = "FLASH_IRQHandler" );                // Flash
-                        vector ( id = 21, optional, fill = "RCC_IRQHandler" );                  // RCC
-                        vector ( id = 22, optional, fill = "EXTI0_IRQHandler" );                // EXTI Line 0
-                        vector ( id = 23, optional, fill = "EXTI1_IRQHandler" );                // EXTI Line 1
-                        vector ( id = 24, optional, fill = "EXTI2_IRQHandler" );                // EXTI Line 2
-                        vector ( id = 25, optional, fill = "EXTI3_IRQHandler" );                // EXTI Line 3
-                        vector ( id = 26, optional, fill = "EXTI4_IRQHandler" );                // EXTI Line 4
-                        vector ( id = 27, optional, fill = "DMA1_Channel1_IRQHandler" );          // DMA Channel 1
-                        vector ( id = 28, optional, fill = "DMA1_Channel2_IRQHandler" );          // DMA Channel 2
-                        vector ( id = 29, optional, fill = "DMA1_Channel3_IRQHandler" );          // DMA Channel 3
-                        vector ( id = 30, optional, fill = "DMA1_Channel4_IRQHandler" );          // DMA Channel 4
-                        vector ( id = 31, optional, fill = "DMA1_Channel5_IRQHandler" );          // DMA Channel 5
-                        vector ( id = 32, optional, fill = "DMA1_Channel6_IRQHandler" );          // DMA Channel 6
-                        vector ( id = 33, optional, fill = "DMA1_Channel7_IRQHandler" );          // DMA Channel 7
-                        vector ( id = 34, optional, fill = "ADC1_2_IRQHandler" );               // ADC1 and ADC2
-                        vector ( id = 35, optional, fill = "USB_HP_CAN1_TX_IRQHandler" );        // USB High Priority or CAN1 TX
-                        vector ( id = 36, optional, fill = "USB_LP_CAN1_RX0_IRQHandler" );       // USB LowPriority or CAN1 RX0
-                        vector ( id = 37, optional, fill = "CAN1_RX1_IRQHandler" );              // CAN1 RX1
-                        vector ( id = 38, optional, fill = "CAN1_SCE_IRQHandler" );              // CAN1 SCE
-                        vector ( id = 39, optional, fill = "EXTI9_5_IRQHandler" );              // EXTI Line 9..5
-                        vector ( id = 40, optional, fill = "TIM1_BRK_IRQHandler" );             // TIM1 Break
-                        vector ( id = 41, optional, fill = "TIM1_UP_IRQHandler" );              // TIM1 Update
-                        vector ( id = 42, optional, fill = "TIM1_TRG_COM_IRQHandler" );         // TIM1 Trigger and Commutation
-                        vector ( id = 43, optional, fill = "TIM1_CC_IRQHandler" );              // TIM1 Capture Compare
-                        vector ( id = 44, optional, fill = "TIM2_IRQHandler" );                 // TIM2
-                        vector ( id = 45, optional, fill = "TIM3_IRQHandler" );                 // TIM3
-                        vector ( id = 46, optional, fill = "TIM4_IRQHandler" );                 // TIM4
-                        vector ( id = 47, optional, fill = "I2C1_EV_IRQHandler" );              // I2C1 Event
-                        vector ( id = 48, optional, fill = "I2C1_ER_IRQHandler" );              // I2C1 Error
-                        vector ( id = 49, optional, fill = "I2C2_EV_IRQHandler" );              // I2C2 Event
-                        vector ( id = 50, optional, fill = "I2C2_ER_IRQHandler" );              // I2C2 Error
-                        vector ( id = 51, optional, fill = "SPI1_IRQHandler" );                 // SPI1
-                        vector ( id = 52, optional, fill = "SPI2_IRQHandler" );                 // SPI2
-                        vector ( id = 53, optional, fill = "USART1_IRQHandler" );               // USART1
-                        vector ( id = 54, optional, fill = "USART2_IRQHandler" );               // USART2
-                        vector ( id = 55, optional, fill = "USART3_IRQHandler" );               // USART3
-                        vector ( id = 56, optional, fill = "EXTI15_10_IRQHandler" );            // EXTI Line 15..10
-                        vector ( id = 57, optional, fill = "RTCAlarm_IRQHandler" );             // RTC Alarm through EXTI Line
-                        vector ( id = 58, optional, fill = "USBWakeUp_IRQHandler" );            // USB Wakeup from suspend
-                        vector ( id = 59, optional, fill = "TIM8_BRK_IRQHandler" );             // TIM8 Break
-                        vector ( id = 60, optional, fill = "TIM8_UP_IRQHandler" );              // TIM8 Update
-                        vector ( id = 61, optional, fill = "TIM8_TRG_COM_IRQHandler" );         // TIM8 Trigger and Commutation
-                        vector ( id = 62, optional, fill = "TIM8_CC_IRQHandler" );              // TIM8 Capture Compare
-                        vector ( id = 63, optional, fill = "ADC3_IRQHandler" );                 // ADC3
-                        vector ( id = 64, optional, fill = "FSMC_IRQHandler" );                 // FSMC
-                        vector ( id = 65, optional, fill = "SDIO_IRQHandler" );                 // SDIO
-                        vector ( id = 66, optional, fill = "TIM5_IRQHandler" );                 // TIM5
-                        vector ( id = 67, optional, fill = "SPI3_IRQHandler" );                 // SPI3
-                        vector ( id = 68, optional, fill = "UART4_IRQHandler" );                // UART4
-                        vector ( id = 69, optional, fill = "UART5_IRQHandler" );                // UART5
-                        vector ( id = 70, optional, fill = "TIM6_IRQHandler" );                 // TIM6
-                        vector ( id = 71, optional, fill = "TIM7_IRQHandler" );                 // TIM7
-                        vector ( id = 72, optional, fill = "DMA2_Channel1_IRQHandler" );        // DMA2 Channel1
-                        vector ( id = 73, optional, fill = "DMA2_Channel2_IRQHandler" );        // DMA2 Channel2
-                        vector ( id = 74, optional, fill = "DMA2_Channel3_IRQHandler" );        // DMA2 Channel3
-                        vector ( id = 75, optional, fill = "DMA2_Channel4_5_IRQHandler" );      // DMA2 Channel4 and DMA2 Channel5
-                }
-}
-# endif
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210E-EVAL/link_offset.lnk b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210E-EVAL/link_offset.lnk
deleted file mode 100644
index 2d9c35c..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210E-EVAL/link_offset.lnk
+++ /dev/null
@@ -1,4 +0,0 @@
--d"./settings/STM32F10x_offset.lsl"
---optimize=0
---map-file-format=2
-$(LinkObjects)
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210X-XL/STM32F10x_offset.lsl b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210X-XL/STM32F10x_offset.lsl
deleted file mode 100644
index 3046e73..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210X-XL/STM32F10x_offset.lsl
+++ /dev/null
@@ -1,173 +0,0 @@
-////////////////////////////////////////////////////////////////////////////
-//
-//  File        :  stm32f103_cmsis.lsl
-//
-//  Version     :  @(#)stm32f103_cmsis.lsl      1.2  09/06/04
-//
-//  Description :  LSL file for the STMicroelectronics STM32F103, CMSIS version
-//
-//  Copyright 2009 Altium BV     
-//
-//  NOTE:
-//      This file is derived from cm3.lsl and stm32f103.lsl.
-//      It is assumed that the user works with the ARMv7M architecture.
-//      Other architectures will not work with this lsl file.
-//
-////////////////////////////////////////////////////////////////////////////
-
-//
-// We do not want the vectors as defined in arm_arch.lsl
-//
-#define __NO_DEFAULT_AUTO_VECTORS       1
-#define __NR_OF_VECTORS                 76
-
-
-#ifndef __STACK
-#  define __STACK                       8k
-#endif
-#ifndef __HEAP
-#  define __HEAP                        2k
-#endif
-#ifndef __VECTOR_TABLE_ROM_ADDR
-#  define __VECTOR_TABLE_ROM_ADDR       0x08003000
-#endif
-#ifndef __XVWBUF
-#define __XVWBUF                        256             /* buffer used by CrossView */
-#endif
-
-#include <arm_arch.lsl>
-
-////////////////////////////////////////////////////////////////////////////
-//
-// In the STM32F10x, 3 different boot modes can be selected
-// - User Flash memory is selected as boot space
-// - SystemMemory is selected as boot space
-// - Embedded SRAM is selected as boot space
-//
-// This aliases the physical memory associated with each boot mode to Block
-// 000 (0x00000000 boot memory). Even when aliased in the boot memory space,
-// the related memory (Flash memory or SRAM) is still accessible at its
-// original memory space.
-//
-// If no memory is defined yet use the following memory settings
-//
-#ifndef __MEMORY
-
-memory stm32f103flash
-{
-    mau = 8;
-    type = rom;
-    size =0xFE000;
-    map ( size = 0xFE000, dest_offset=0x08003000, dest=bus:ARM:local_bus);
-}
-
-memory stm32f103ram
-{
-    mau = 8;
-    type = ram;
-    size = 96k;
-    map ( size = 96k, dest_offset=0x20000000, dest=bus:ARM:local_bus);
-}
-
-#endif /* __MEMORY */
-
-section_layout ::linear
-{
-	group( contiguous )
-	{
-		select ".bss.stack";
-		select "stack";
-	}
-}
-
-//
-// Custom vector table defines interrupts according to CMSIS standard
-//
-# if defined(__CPU_ARMV7M__)
-section_setup ::linear
-{
-                // vector table with handler addresses
-                vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_ROM_ADDR,
-                                              template = ".text.handler_address",
-                                              template_symbol = "_lc_vector_handler",
-                                              vector_prefix = "_vector_",
-                                              fill = loop,
-                                              no_inline
-                                            )
-                {
-                         vector ( id = 0, fill = "_stacklabel" ); // FIXME: "_lc_ub_stack" does not work
-                        vector ( id = 1, fill = "_START" );
-                        vector ( id = 2, optional, fill = "NMI_Handler" );
-                        vector ( id = 3, optional, fill = "HardFault_Handler" );
-                        vector ( id = 4, optional, fill = "MemManage_Handler" );
-                        vector ( id = 5, optional, fill = "BusFault_Handler" );
-                        vector ( id = 6, optional, fill = "UsageFault_Handler" );
-                        vector ( id = 11, optional, fill = "SVC_Handler" );
-                        vector ( id = 12, optional, fill = "DebugMon_Handler" );
-                        vector ( id = 14, optional, fill = "PendSV_Handler" );
-                        vector ( id = 15, optional, fill = "SysTick_Handler" );
-
-                        // External Interrupts :
-                        vector ( id = 16, optional, fill = "WWDG_IRQHandler" );                 // Window Watchdog
-                        vector ( id = 17, optional, fill = "PVD_IRQHandler" );                  // PVD through EXTI Line detect
-                        vector ( id = 18, optional, fill = "TAMPER_IRQHandler" );               // Tamper
-                        vector ( id = 19, optional, fill = "RTC_IRQHandler" );                  // RTC
-                        vector ( id = 20, optional, fill = "FLASH_IRQHandler" );                // Flash
-                        vector ( id = 21, optional, fill = "RCC_IRQHandler" );                  // RCC
-                        vector ( id = 22, optional, fill = "EXTI0_IRQHandler" );                // EXTI Line 0
-                        vector ( id = 23, optional, fill = "EXTI1_IRQHandler" );                // EXTI Line 1
-                        vector ( id = 24, optional, fill = "EXTI2_IRQHandler" );                // EXTI Line 2
-                        vector ( id = 25, optional, fill = "EXTI3_IRQHandler" );                // EXTI Line 3
-                        vector ( id = 26, optional, fill = "EXTI4_IRQHandler" );                // EXTI Line 4
-                        vector ( id = 27, optional, fill = "DMA1_Channel1_IRQHandler" );          // DMA Channel 1
-                        vector ( id = 28, optional, fill = "DMA1_Channel2_IRQHandler" );          // DMA Channel 2
-                        vector ( id = 29, optional, fill = "DMA1_Channel3_IRQHandler" );          // DMA Channel 3
-                        vector ( id = 30, optional, fill = "DMA1_Channel4_IRQHandler" );          // DMA Channel 4
-                        vector ( id = 31, optional, fill = "DMA1_Channel5_IRQHandler" );          // DMA Channel 5
-                        vector ( id = 32, optional, fill = "DMA1_Channel6_IRQHandler" );          // DMA Channel 6
-                        vector ( id = 33, optional, fill = "DMA1_Channel7_IRQHandler" );          // DMA Channel 7
-                        vector ( id = 34, optional, fill = "ADC1_2_IRQHandler" );               // ADC1 and ADC2
-                        vector ( id = 35, optional, fill = "USB_HP_CAN1_TX_IRQHandler" );        // USB High Priority or CAN1 TX
-                        vector ( id = 36, optional, fill = "USB_LP_CAN1_RX0_IRQHandler" );       // USB LowPriority or CAN1 RX0
-                        vector ( id = 37, optional, fill = "CAN1_RX1_IRQHandler" );              // CAN1 RX1
-                        vector ( id = 38, optional, fill = "CAN1_SCE_IRQHandler" );              // CAN1 SCE
-                        vector ( id = 39, optional, fill = "EXTI9_5_IRQHandler" );              // EXTI Line 9..5
-                        vector ( id = 40, optional, fill = "TIM1_BRK_IRQHandler" );             // TIM1 Break
-                        vector ( id = 41, optional, fill = "TIM1_UP_IRQHandler" );              // TIM1 Update
-                        vector ( id = 42, optional, fill = "TIM1_TRG_COM_IRQHandler" );         // TIM1 Trigger and Commutation
-                        vector ( id = 43, optional, fill = "TIM1_CC_IRQHandler" );              // TIM1 Capture Compare
-                        vector ( id = 44, optional, fill = "TIM2_IRQHandler" );                 // TIM2
-                        vector ( id = 45, optional, fill = "TIM3_IRQHandler" );                 // TIM3
-                        vector ( id = 46, optional, fill = "TIM4_IRQHandler" );                 // TIM4
-                        vector ( id = 47, optional, fill = "I2C1_EV_IRQHandler" );              // I2C1 Event
-                        vector ( id = 48, optional, fill = "I2C1_ER_IRQHandler" );              // I2C1 Error
-                        vector ( id = 49, optional, fill = "I2C2_EV_IRQHandler" );              // I2C2 Event
-                        vector ( id = 50, optional, fill = "I2C2_ER_IRQHandler" );              // I2C2 Error
-                        vector ( id = 51, optional, fill = "SPI1_IRQHandler" );                 // SPI1
-                        vector ( id = 52, optional, fill = "SPI2_IRQHandler" );                 // SPI2
-                        vector ( id = 53, optional, fill = "USART1_IRQHandler" );               // USART1
-                        vector ( id = 54, optional, fill = "USART2_IRQHandler" );               // USART2
-                        vector ( id = 55, optional, fill = "USART3_IRQHandler" );               // USART3
-                        vector ( id = 56, optional, fill = "EXTI15_10_IRQHandler" );            // EXTI Line 15..10
-                        vector ( id = 57, optional, fill = "RTCAlarm_IRQHandler" );             // RTC Alarm through EXTI Line
-                        vector ( id = 58, optional, fill = "USBWakeUp_IRQHandler" );            // USB Wakeup from suspend
-                        vector ( id = 59, optional, fill = "TIM8_BRK_IRQHandler" );             // TIM8 Break
-                        vector ( id = 60, optional, fill = "TIM8_UP_IRQHandler" );              // TIM8 Update
-                        vector ( id = 61, optional, fill = "TIM8_TRG_COM_IRQHandler" );         // TIM8 Trigger and Commutation
-                        vector ( id = 62, optional, fill = "TIM8_CC_IRQHandler" );              // TIM8 Capture Compare
-                        vector ( id = 63, optional, fill = "ADC3_IRQHandler" );                 // ADC3
-                        vector ( id = 64, optional, fill = "FSMC_IRQHandler" );                 // FSMC
-                        vector ( id = 65, optional, fill = "SDIO_IRQHandler" );                 // SDIO
-                        vector ( id = 66, optional, fill = "TIM5_IRQHandler" );                 // TIM5
-                        vector ( id = 67, optional, fill = "SPI3_IRQHandler" );                 // SPI3
-                        vector ( id = 68, optional, fill = "UART4_IRQHandler" );                // UART4
-                        vector ( id = 69, optional, fill = "UART5_IRQHandler" );                // UART5
-                        vector ( id = 70, optional, fill = "TIM6_IRQHandler" );                 // TIM6
-                        vector ( id = 71, optional, fill = "TIM7_IRQHandler" );                 // TIM7
-                        vector ( id = 72, optional, fill = "DMA2_Channel1_IRQHandler" );        // DMA2 Channel1
-                        vector ( id = 73, optional, fill = "DMA2_Channel2_IRQHandler" );        // DMA2 Channel2
-                        vector ( id = 74, optional, fill = "DMA2_Channel3_IRQHandler" );        // DMA2 Channel3
-                        vector ( id = 75, optional, fill = "DMA2_Channel4_5_IRQHandler" );      // DMA2 Channel4 and DMA2 Channel5
-                }
-}
-# endif
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210X-XL/link_offset.lnk b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210X-XL/link_offset.lnk
deleted file mode 100644
index 2d9c35c..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210X-XL/link_offset.lnk
+++ /dev/null
@@ -1,4 +0,0 @@
--d"./settings/STM32F10x_offset.lsl"
---optimize=0
---map-file-format=2
-$(LinkObjects)
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/setstack.asm b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/setstack.asm
deleted file mode 100644
index 2c11b4c..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/setstack.asm
+++ /dev/null
@@ -1,4 +0,0 @@
-	.section	.bss.stack
-	.global	_stacklabel
-_stacklabel:
-	.endsec
\ No newline at end of file
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/TrueSTUDIO/stm32f10x_flash_offset.ld b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/TrueSTUDIO/stm32f10x_flash_offset.ld
deleted file mode 100644
index 9349b62..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/TrueSTUDIO/stm32f10x_flash_offset.ld
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
-*****************************************************************************
-**
-**  File        : stm32f10x_flash_offset.ld
-**
-**  Abstract    : Linker script for STM32F10x XL-density devices with
-**                1MByte FLASH, 96KByte RAM
-**
-**                Set heap size, stack size and stack location according
-**                to application requirements.
-**
-**                Set memory bank area and size if external memory is used.
-**
-**  Target      : STMicroelectronics STM32
-**
-**  Environment : Atollic TrueSTUDIO(R)
-**
-**  Distribution: The file is distributed “as is,” without any warranty
-**                of any kind.
-**
-**  (c)Copyright Atollic AB.
-**  You may use this file as-is or modify it according to the needs of your
-**  project. Distribution of this file (unmodified or modified) is not
-**  permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the
-**  rights to distribute the assembled, compiled & linked contents of this
-**  file as part of an application binary file, provided that it is built
-**  using the Atollic TrueSTUDIO(R) toolchain.
-**
-*****************************************************************************
-*/
-
-/* Entry Point */
-ENTRY(Reset_Handler)
-
-/* Highest address of the user mode stack */
-_estack = 0x20018000;    /* end of 96K RAM */
-
-/* Generate a link error if heap and stack don't fit into RAM */
-_Min_Heap_Size = 0;      /* required amount of heap  */
-_Min_Stack_Size = 0x200; /* required amount of stack */
-
-/* Specify the memory areas */
-MEMORY
-{
-  FLASH (rx)      : ORIGIN = 0x08003000, LENGTH = 1024K - 0x3000
-  RAM (xrw)       : ORIGIN = 0x20000000, LENGTH = 96K
-  MEMORY_B1 (rx)  : ORIGIN = 0x60000000, LENGTH = 0K
-}
-
-/* Define output sections */
-SECTIONS
-{
-  /* The startup code goes first into FLASH */
-  .isr_vector :
-  {
-    . = ALIGN(4);
-    KEEP(*(.isr_vector)) /* Startup code */
-    . = ALIGN(4);
-  } >FLASH
-
-  /* The program code and other data goes into FLASH */
-  .text :
-  {
-    . = ALIGN(4);
-    *(.text)           /* .text sections (code) */
-    *(.text*)          /* .text* sections (code) */
-    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
-    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
-    *(.glue_7)         /* glue arm to thumb code */
-    *(.glue_7t)        /* glue thumb to arm code */
-
-    KEEP (*(.init))
-    KEEP (*(.fini))
-
-    . = ALIGN(4);
-    _etext = .;        /* define a global symbols at end of code */
-  } >FLASH
-
-
-   .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
-    .ARM : {
-    __exidx_start = .;
-      *(.ARM.exidx*)
-      __exidx_end = .;
-    } >FLASH
-
-  .ARM.attributes : { *(.ARM.attributes) } > FLASH
-
-  .preinit_array     :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array*))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } >FLASH
-  .init_array :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT(.init_array.*)))
-    KEEP (*(.init_array*))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } >FLASH
-  .fini_array :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(.fini_array*))
-    KEEP (*(SORT(.fini_array.*)))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } >FLASH
-
-  /* used by the startup to initialize data */
-  _sidata = .;
-
-  /* Initialized data sections goes into RAM, load LMA copy after code */
-  .data : AT ( _sidata )
-  {
-    . = ALIGN(4);
-    _sdata = .;        /* create a global symbol at data start */
-    *(.data)           /* .data sections */
-    *(.data*)          /* .data* sections */
-
-    . = ALIGN(4);
-    _edata = .;        /* define a global symbol at data end */
-  } >RAM
-
-  /* Uninitialized data section */
-  . = ALIGN(4);
-  .bss :
-  {
-    /* This is used by the startup in order to initialize the .bss secion */
-    _sbss = .;         /* define a global symbol at bss start */
-    __bss_start__ = _sbss;
-    *(.bss)
-    *(.bss*)
-    *(COMMON)
-
-    . = ALIGN(4);
-    _ebss = .;         /* define a global symbol at bss end */
-    __bss_end__ = _ebss;
-  } >RAM
-
-  PROVIDE ( end = _ebss );
-  PROVIDE ( _end = _ebss );
-
-  /* User_heap_stack section, used to check that there is enough RAM left */
-  ._user_heap_stack :
-  {
-    . = ALIGN(4);
-    . = . + _Min_Heap_Size;
-    . = . + _Min_Stack_Size;
-    . = ALIGN(4);
-  } >RAM
-
-  /* MEMORY_bank1 section, code must be located here explicitly            */
-  /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
-  .memory_b1_text :
-  {
-    *(.mb1text)        /* .mb1text sections (code) */
-    *(.mb1text*)       /* .mb1text* sections (code)  */
-    *(.mb1rodata)      /* read-only data (constants) */
-    *(.mb1rodata*)
-  } >MEMORY_B1
-
-  /* Remove information from the standard libraries */
-  /DISCARD/ :
-  {
-    libc.a ( * )
-    libm.a ( * )
-    libgcc.a ( * )
-  }
-}