o Moving tinyprintf and stm libraries under thirdparty.

1 files changed, 0 insertions, 1684 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c
deleted file mode 100644
index cdff9e9..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c
+++ /dev/null
@@ -1,1684 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f10x_flash.c
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    11-March-2011
-  * @brief   This file provides all the FLASH firmware functions.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_flash.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Driver
-  * @{
-  */
-
-/** @defgroup FLASH 
-  * @brief FLASH driver modules
-  * @{
-  */ 
-
-/** @defgroup FLASH_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */ 
-
-/** @defgroup FLASH_Private_Defines
-  * @{
-  */ 
-
-/* Flash Access Control Register bits */
-#define ACR_LATENCY_Mask         ((uint32_t)0x00000038)
-#define ACR_HLFCYA_Mask          ((uint32_t)0xFFFFFFF7)
-#define ACR_PRFTBE_Mask          ((uint32_t)0xFFFFFFEF)
-
-/* Flash Access Control Register bits */
-#define ACR_PRFTBS_Mask          ((uint32_t)0x00000020) 
-
-/* Flash Control Register bits */
-#define CR_PG_Set                ((uint32_t)0x00000001)
-#define CR_PG_Reset              ((uint32_t)0x00001FFE) 
-#define CR_PER_Set               ((uint32_t)0x00000002)
-#define CR_PER_Reset             ((uint32_t)0x00001FFD)
-#define CR_MER_Set               ((uint32_t)0x00000004)
-#define CR_MER_Reset             ((uint32_t)0x00001FFB)
-#define CR_OPTPG_Set             ((uint32_t)0x00000010)
-#define CR_OPTPG_Reset           ((uint32_t)0x00001FEF)
-#define CR_OPTER_Set             ((uint32_t)0x00000020)
-#define CR_OPTER_Reset           ((uint32_t)0x00001FDF)
-#define CR_STRT_Set              ((uint32_t)0x00000040)
-#define CR_LOCK_Set              ((uint32_t)0x00000080)
-
-/* FLASH Mask */
-#define RDPRT_Mask               ((uint32_t)0x00000002)
-#define WRP0_Mask                ((uint32_t)0x000000FF)
-#define WRP1_Mask                ((uint32_t)0x0000FF00)
-#define WRP2_Mask                ((uint32_t)0x00FF0000)
-#define WRP3_Mask                ((uint32_t)0xFF000000)
-#define OB_USER_BFB2             ((uint16_t)0x0008)
-
-/* FLASH Keys */
-#define RDP_Key                  ((uint16_t)0x00A5)
-#define FLASH_KEY1               ((uint32_t)0x45670123)
-#define FLASH_KEY2               ((uint32_t)0xCDEF89AB)
-
-/* FLASH BANK address */
-#define FLASH_BANK1_END_ADDRESS   ((uint32_t)0x807FFFF)
-
-/* Delay definition */   
-#define EraseTimeout          ((uint32_t)0x000B0000)
-#define ProgramTimeout        ((uint32_t)0x00002000)
-/**
-  * @}
-  */ 
-
-/** @defgroup FLASH_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */ 
-
-/** @defgroup FLASH_Private_Variables
-  * @{
-  */
-
-/**
-  * @}
-  */ 
-
-/** @defgroup FLASH_Private_FunctionPrototypes
-  * @{
-  */
-  
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_Private_Functions
-  * @{
-  */
-
-/**
-@code  
- 
- This driver provides functions to configure and program the Flash memory of all STM32F10x devices,
- including the latest STM32F10x_XL density devices. 
-
- STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability:
-    - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each)
-    - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each)
- While other STM32F10x devices features only one bank with memory up to 512 Kbytes.
-
- In version V3.3.0, some functions were updated and new ones were added to support
- STM32F10x_XL devices. Thus some functions manages all devices, while other are 
- dedicated for XL devices only.
- 
- The table below presents the list of available functions depending on the used STM32F10x devices.  
-      
-   ***************************************************
-   * Legacy functions used for all STM32F10x devices *
-   ***************************************************
-   +----------------------------------------------------------------------------------------------------------------------------------+
-   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
-   |                                    |   devices  |  devices      |                                                                |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_SetLatency                    |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_HalfCycleAccessCmd            |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_PrefetchBufferCmd             |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_Unlock                        |    Yes     |      Yes      | - For STM32F10X_XL devices: unlock Bank1 and Bank2.            |
-   |                                    |            |               | - For other devices: unlock Bank1 and it is equivalent         |
-   |                                    |            |               |   to FLASH_UnlockBank1 function.                               |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_Lock                          |    Yes     |      Yes      | - For STM32F10X_XL devices: lock Bank1 and Bank2.              |
-   |                                    |            |               | - For other devices: lock Bank1 and it is equivalent           |
-   |                                    |            |               |   to FLASH_LockBank1 function.                                 |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_ErasePage                     |    Yes     |      Yes      | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2    |
-   |                                    |            |               | - For other devices: erase a page in Bank1                     |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_EraseAllPages                 |    Yes     |      Yes      | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 |
-   |                                    |            |               | - For other devices: erase all pages in Bank1                  |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_EraseOptionBytes              |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_ProgramWord                   |    Yes     |      Yes      | Updated to program up to 1MByte (depending on the used device) |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_ProgramHalfWord               |    Yes     |      Yes      | Updated to program up to 1MByte (depending on the used device) |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_ProgramOptionByteData         |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_EnableWriteProtection         |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_ReadOutProtection             |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_UserOptionByteConfig          |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_GetUserOptionByte             |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_GetWriteProtectionOptionByte  |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_GetReadOutProtectionStatus    |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_GetPrefetchBufferStatus       |    Yes     |      Yes      | No change                                                      |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_ITConfig                      |    Yes     |      Yes      | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts|
-   |                                    |            |               | - For other devices: enable Bank1's interrupts                 |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_GetFlagStatus                 |    Yes     |      Yes      | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status|
-   |                                    |            |               | - For other devices: return Bank1's flag status                |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_ClearFlag                     |    Yes     |      Yes      | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag       |
-   |                                    |            |               | - For other devices: clear Bank1's flag                        |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_GetStatus                     |    Yes     |      Yes      | - Return the status of Bank1 (for all devices)                 |
-   |                                    |            |               |   equivalent to FLASH_GetBank1Status function                  |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_WaitForLastOperation          |    Yes     |      Yes      | - Wait for Bank1 last operation (for all devices)              |
-   |                                    |            |               |   equivalent to: FLASH_WaitForLastBank1Operation function      |
-   +----------------------------------------------------------------------------------------------------------------------------------+
-
-   ************************************************************************************************************************
-   * New functions used for all STM32F10x devices to manage Bank1:                                                        *
-   *   - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 *
-   *   - For other devices, these functions are optional (covered by functions listed above)                              *
-   ************************************************************************************************************************
-   +----------------------------------------------------------------------------------------------------------------------------------+
-   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
-   |                                    |   devices  |  devices      |                                                                |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   | FLASH_UnlockBank1                  |    Yes     |      Yes      | - Unlock Bank1                                                 |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_LockBank1                     |    Yes     |      Yes      | - Lock Bank1                                                   |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   | FLASH_EraseAllBank1Pages           |    Yes     |      Yes      | - Erase all pages in Bank1                                     |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   | FLASH_GetBank1Status               |    Yes     |      Yes      | - Return the status of Bank1                                   |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   | FLASH_WaitForLastBank1Operation    |    Yes     |      Yes      | - Wait for Bank1 last operation                                |
-   +----------------------------------------------------------------------------------------------------------------------------------+
-
-   *****************************************************************************
-   * New Functions used only with STM32F10x_XL density devices to manage Bank2 *
-   *****************************************************************************
-   +----------------------------------------------------------------------------------------------------------------------------------+
-   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
-   |                                    |   devices  |  devices      |                                                                |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   | FLASH_UnlockBank2                  |    Yes     |      No       | - Unlock Bank2                                                 |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   |FLASH_LockBank2                     |    Yes     |      No       | - Lock Bank2                                                   |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   | FLASH_EraseAllBank2Pages           |    Yes     |      No       | - Erase all pages in Bank2                                     |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   | FLASH_GetBank2Status               |    Yes     |      No       | - Return the status of Bank2                                   |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   | FLASH_WaitForLastBank2Operation    |    Yes     |      No       | - Wait for Bank2 last operation                                |
-   |----------------------------------------------------------------------------------------------------------------------------------|
-   | FLASH_BootConfig                   |    Yes     |      No       | - Configure to boot from Bank1 or Bank2                        |
-   +----------------------------------------------------------------------------------------------------------------------------------+
-@endcode
-*/
-
-
-/**
-  * @brief  Sets the code latency value.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  FLASH_Latency: specifies the FLASH Latency value.
-  *   This parameter can be one of the following values:
-  *     @arg FLASH_Latency_0: FLASH Zero Latency cycle
-  *     @arg FLASH_Latency_1: FLASH One Latency cycle
-  *     @arg FLASH_Latency_2: FLASH Two Latency cycles
-  * @retval None
-  */
-void FLASH_SetLatency(uint32_t FLASH_Latency)
-{
-  uint32_t tmpreg = 0;
-  
-  /* Check the parameters */
-  assert_param(IS_FLASH_LATENCY(FLASH_Latency));
-  
-  /* Read the ACR register */
-  tmpreg = FLASH->ACR;  
-  
-  /* Sets the Latency value */
-  tmpreg &= ACR_LATENCY_Mask;
-  tmpreg |= FLASH_Latency;
-  
-  /* Write the ACR register */
-  FLASH->ACR = tmpreg;
-}
-
-/**
-  * @brief  Enables or disables the Half cycle flash access.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode.
-  *   This parameter can be one of the following values:
-  *     @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable
-  *     @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable
-  * @retval None
-  */
-void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess)
-{
-  /* Check the parameters */
-  assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess));
-  
-  /* Enable or disable the Half cycle access */
-  FLASH->ACR &= ACR_HLFCYA_Mask;
-  FLASH->ACR |= FLASH_HalfCycleAccess;
-}
-
-/**
-  * @brief  Enables or disables the Prefetch Buffer.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  FLASH_PrefetchBuffer: specifies the Prefetch buffer status.
-  *   This parameter can be one of the following values:
-  *     @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable
-  *     @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable
-  * @retval None
-  */
-void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer)
-{
-  /* Check the parameters */
-  assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer));
-  
-  /* Enable or disable the Prefetch Buffer */
-  FLASH->ACR &= ACR_PRFTBE_Mask;
-  FLASH->ACR |= FLASH_PrefetchBuffer;
-}
-
-/**
-  * @brief  Unlocks the FLASH Program Erase Controller.
-  * @note   This function can be used for all STM32F10x devices.
-  *         - For STM32F10X_XL devices this function unlocks Bank1 and Bank2.
-  *         - For all other devices it unlocks Bank1 and it is equivalent 
-  *           to FLASH_UnlockBank1 function.. 
-  * @param  None
-  * @retval None
-  */
-void FLASH_Unlock(void)
-{
-  /* Authorize the FPEC of Bank1 Access */
-  FLASH->KEYR = FLASH_KEY1;
-  FLASH->KEYR = FLASH_KEY2;
-
-#ifdef STM32F10X_XL
-  /* Authorize the FPEC of Bank2 Access */
-  FLASH->KEYR2 = FLASH_KEY1;
-  FLASH->KEYR2 = FLASH_KEY2;
-#endif /* STM32F10X_XL */
-}
-/**
-  * @brief  Unlocks the FLASH Bank1 Program Erase Controller.
-  * @note   This function can be used for all STM32F10x devices.
-  *         - For STM32F10X_XL devices this function unlocks Bank1.
-  *         - For all other devices it unlocks Bank1 and it is 
-  *           equivalent to FLASH_Unlock function.
-  * @param  None
-  * @retval None
-  */
-void FLASH_UnlockBank1(void)
-{
-  /* Authorize the FPEC of Bank1 Access */
-  FLASH->KEYR = FLASH_KEY1;
-  FLASH->KEYR = FLASH_KEY2;
-}
-
-#ifdef STM32F10X_XL
-/**
-  * @brief  Unlocks the FLASH Bank2 Program Erase Controller.
-  * @note   This function can be used only for STM32F10X_XL density devices.
-  * @param  None
-  * @retval None
-  */
-void FLASH_UnlockBank2(void)
-{
-  /* Authorize the FPEC of Bank2 Access */
-  FLASH->KEYR2 = FLASH_KEY1;
-  FLASH->KEYR2 = FLASH_KEY2;
-
-}
-#endif /* STM32F10X_XL */
-
-/**
-  * @brief  Locks the FLASH Program Erase Controller.
-  * @note   This function can be used for all STM32F10x devices.
-  *         - For STM32F10X_XL devices this function Locks Bank1 and Bank2.
-  *         - For all other devices it Locks Bank1 and it is equivalent 
-  *           to FLASH_LockBank1 function.
-  * @param  None
-  * @retval None
-  */
-void FLASH_Lock(void)
-{
-  /* Set the Lock Bit to lock the FPEC and the CR of  Bank1 */
-  FLASH->CR |= CR_LOCK_Set;
-
-#ifdef STM32F10X_XL
-  /* Set the Lock Bit to lock the FPEC and the CR of  Bank2 */
-  FLASH->CR2 |= CR_LOCK_Set;
-#endif /* STM32F10X_XL */
-}
-
-/**
-  * @brief  Locks the FLASH Bank1 Program Erase Controller.
-  * @note   this function can be used for all STM32F10x devices.
-  *         - For STM32F10X_XL devices this function Locks Bank1.
-  *         - For all other devices it Locks Bank1 and it is equivalent 
-  *           to FLASH_Lock function.
-  * @param  None
-  * @retval None
-  */
-void FLASH_LockBank1(void)
-{
-  /* Set the Lock Bit to lock the FPEC and the CR of  Bank1 */
-  FLASH->CR |= CR_LOCK_Set;
-}
-
-#ifdef STM32F10X_XL
-/**
-  * @brief  Locks the FLASH Bank2 Program Erase Controller.
-  * @note   This function can be used only for STM32F10X_XL density devices.
-  * @param  None
-  * @retval None
-  */
-void FLASH_LockBank2(void)
-{
-  /* Set the Lock Bit to lock the FPEC and the CR of  Bank2 */
-  FLASH->CR2 |= CR_LOCK_Set;
-}
-#endif /* STM32F10X_XL */
-
-/**
-  * @brief  Erases a specified FLASH page.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  Page_Address: The page address to be erased.
-  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
-{
-  FLASH_Status status = FLASH_COMPLETE;
-  /* Check the parameters */
-  assert_param(IS_FLASH_ADDRESS(Page_Address));
-
-#ifdef STM32F10X_XL
-  if(Page_Address < FLASH_BANK1_END_ADDRESS)  
-  {
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-    if(status == FLASH_COMPLETE)
-    { 
-      /* if the previous operation is completed, proceed to erase the page */
-      FLASH->CR|= CR_PER_Set;
-      FLASH->AR = Page_Address; 
-      FLASH->CR|= CR_STRT_Set;
-    
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-
-      /* Disable the PER Bit */
-      FLASH->CR &= CR_PER_Reset;
-    }
-  }
-  else
-  {
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastBank2Operation(EraseTimeout);
-    if(status == FLASH_COMPLETE)
-    { 
-      /* if the previous operation is completed, proceed to erase the page */
-      FLASH->CR2|= CR_PER_Set;
-      FLASH->AR2 = Page_Address; 
-      FLASH->CR2|= CR_STRT_Set;
-    
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastBank2Operation(EraseTimeout);
-      
-      /* Disable the PER Bit */
-      FLASH->CR2 &= CR_PER_Reset;
-    }
-  }
-#else
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastOperation(EraseTimeout);
-  
-  if(status == FLASH_COMPLETE)
-  { 
-    /* if the previous operation is completed, proceed to erase the page */
-    FLASH->CR|= CR_PER_Set;
-    FLASH->AR = Page_Address; 
-    FLASH->CR|= CR_STRT_Set;
-    
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastOperation(EraseTimeout);
-    
-    /* Disable the PER Bit */
-    FLASH->CR &= CR_PER_Reset;
-  }
-#endif /* STM32F10X_XL */
-
-  /* Return the Erase Status */
-  return status;
-}
-
-/**
-  * @brief  Erases all FLASH pages.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  None
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_EraseAllPages(void)
-{
-  FLASH_Status status = FLASH_COMPLETE;
-
-#ifdef STM32F10X_XL
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-  
-  if(status == FLASH_COMPLETE)
-  {
-    /* if the previous operation is completed, proceed to erase all pages */
-     FLASH->CR |= CR_MER_Set;
-     FLASH->CR |= CR_STRT_Set;
-    
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-    
-    /* Disable the MER Bit */
-    FLASH->CR &= CR_MER_Reset;
-  }    
-  if(status == FLASH_COMPLETE)
-  {
-    /* if the previous operation is completed, proceed to erase all pages */
-     FLASH->CR2 |= CR_MER_Set;
-     FLASH->CR2 |= CR_STRT_Set;
-    
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastBank2Operation(EraseTimeout);
-    
-    /* Disable the MER Bit */
-    FLASH->CR2 &= CR_MER_Reset;
-  }
-#else
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastOperation(EraseTimeout);
-  if(status == FLASH_COMPLETE)
-  {
-    /* if the previous operation is completed, proceed to erase all pages */
-     FLASH->CR |= CR_MER_Set;
-     FLASH->CR |= CR_STRT_Set;
-    
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastOperation(EraseTimeout);
-
-    /* Disable the MER Bit */
-    FLASH->CR &= CR_MER_Reset;
-  }
-#endif /* STM32F10X_XL */
-
-  /* Return the Erase Status */
-  return status;
-}
-
-/**
-  * @brief  Erases all Bank1 FLASH pages.
-  * @note   This function can be used for all STM32F10x devices.
-  *         - For STM32F10X_XL devices this function erases all Bank1 pages.
-  *         - For all other devices it erases all Bank1 pages and it is equivalent 
-  *           to FLASH_EraseAllPages function.
-  * @param  None
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_EraseAllBank1Pages(void)
-{
-  FLASH_Status status = FLASH_COMPLETE;
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-  
-  if(status == FLASH_COMPLETE)
-  {
-    /* if the previous operation is completed, proceed to erase all pages */
-     FLASH->CR |= CR_MER_Set;
-     FLASH->CR |= CR_STRT_Set;
-    
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-    
-    /* Disable the MER Bit */
-    FLASH->CR &= CR_MER_Reset;
-  }    
-  /* Return the Erase Status */
-  return status;
-}
-
-#ifdef STM32F10X_XL
-/**
-  * @brief  Erases all Bank2 FLASH pages.
-  * @note   This function can be used only for STM32F10x_XL density devices.
-  * @param  None
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_EraseAllBank2Pages(void)
-{
-  FLASH_Status status = FLASH_COMPLETE;
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastBank2Operation(EraseTimeout);
-  
-  if(status == FLASH_COMPLETE)
-  {
-    /* if the previous operation is completed, proceed to erase all pages */
-     FLASH->CR2 |= CR_MER_Set;
-     FLASH->CR2 |= CR_STRT_Set;
-    
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastBank2Operation(EraseTimeout);
-
-    /* Disable the MER Bit */
-    FLASH->CR2 &= CR_MER_Reset;
-  }    
-  /* Return the Erase Status */
-  return status;
-}
-#endif /* STM32F10X_XL */
-
-/**
-  * @brief  Erases the FLASH option bytes.
-  * @note   This functions erases all option bytes except the Read protection (RDP). 
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  None
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_EraseOptionBytes(void)
-{
-  uint16_t rdptmp = RDP_Key;
-
-  FLASH_Status status = FLASH_COMPLETE;
-
-  /* Get the actual read protection Option Byte value */ 
-  if(FLASH_GetReadOutProtectionStatus() != RESET)
-  {
-    rdptmp = 0x00;  
-  }
-
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastOperation(EraseTimeout);
-  if(status == FLASH_COMPLETE)
-  {
-    /* Authorize the small information block programming */
-    FLASH->OPTKEYR = FLASH_KEY1;
-    FLASH->OPTKEYR = FLASH_KEY2;
-    
-    /* if the previous operation is completed, proceed to erase the option bytes */
-    FLASH->CR |= CR_OPTER_Set;
-    FLASH->CR |= CR_STRT_Set;
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastOperation(EraseTimeout);
-    
-    if(status == FLASH_COMPLETE)
-    {
-      /* if the erase operation is completed, disable the OPTER Bit */
-      FLASH->CR &= CR_OPTER_Reset;
-       
-      /* Enable the Option Bytes Programming operation */
-      FLASH->CR |= CR_OPTPG_Set;
-      /* Restore the last read protection Option Byte value */
-      OB->RDP = (uint16_t)rdptmp; 
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastOperation(ProgramTimeout);
- 
-      if(status != FLASH_TIMEOUT)
-      {
-        /* if the program operation is completed, disable the OPTPG Bit */
-        FLASH->CR &= CR_OPTPG_Reset;
-      }
-    }
-    else
-    {
-      if (status != FLASH_TIMEOUT)
-      {
-        /* Disable the OPTPG Bit */
-        FLASH->CR &= CR_OPTPG_Reset;
-      }
-    }  
-  }
-  /* Return the erase status */
-  return status;
-}
-
-/**
-  * @brief  Programs a word at a specified address.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  Address: specifies the address to be programmed.
-  * @param  Data: specifies the data to be programmed.
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. 
-  */
-FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
-{
-  FLASH_Status status = FLASH_COMPLETE;
-  __IO uint32_t tmp = 0;
-
-  /* Check the parameters */
-  assert_param(IS_FLASH_ADDRESS(Address));
-
-#ifdef STM32F10X_XL
-  if(Address < FLASH_BANK1_END_ADDRESS - 2)
-  { 
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastBank1Operation(ProgramTimeout); 
-    if(status == FLASH_COMPLETE)
-    {
-      /* if the previous operation is completed, proceed to program the new first 
-        half word */
-      FLASH->CR |= CR_PG_Set;
-  
-      *(__IO uint16_t*)Address = (uint16_t)Data;
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastOperation(ProgramTimeout);
- 
-      if(status == FLASH_COMPLETE)
-      {
-        /* if the previous operation is completed, proceed to program the new second 
-        half word */
-        tmp = Address + 2;
-
-        *(__IO uint16_t*) tmp = Data >> 16;
-    
-        /* Wait for last operation to be completed */
-        status = FLASH_WaitForLastOperation(ProgramTimeout);
-        
-        /* Disable the PG Bit */
-        FLASH->CR &= CR_PG_Reset;
-      }
-      else
-      {
-        /* Disable the PG Bit */
-        FLASH->CR &= CR_PG_Reset;
-       }
-    }
-  }
-  else if(Address == (FLASH_BANK1_END_ADDRESS - 1))
-  {
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
-
-    if(status == FLASH_COMPLETE)
-    {
-      /* if the previous operation is completed, proceed to program the new first 
-        half word */
-      FLASH->CR |= CR_PG_Set;
-  
-      *(__IO uint16_t*)Address = (uint16_t)Data;
-
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
-      
-	  /* Disable the PG Bit */
-      FLASH->CR &= CR_PG_Reset;
-    }
-    else
-    {
-      /* Disable the PG Bit */
-      FLASH->CR &= CR_PG_Reset;
-    }
-
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-
-    if(status == FLASH_COMPLETE)
-    {
-      /* if the previous operation is completed, proceed to program the new second 
-      half word */
-      FLASH->CR2 |= CR_PG_Set;
-      tmp = Address + 2;
-
-      *(__IO uint16_t*) tmp = Data >> 16;
-    
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-        
-      /* Disable the PG Bit */
-      FLASH->CR2 &= CR_PG_Reset;
-    }
-    else
-    {
-      /* Disable the PG Bit */
-      FLASH->CR2 &= CR_PG_Reset;
-    }
-  }
-  else
-  {
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-
-    if(status == FLASH_COMPLETE)
-    {
-      /* if the previous operation is completed, proceed to program the new first 
-        half word */
-      FLASH->CR2 |= CR_PG_Set;
-  
-      *(__IO uint16_t*)Address = (uint16_t)Data;
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
- 
-      if(status == FLASH_COMPLETE)
-      {
-        /* if the previous operation is completed, proceed to program the new second 
-        half word */
-        tmp = Address + 2;
-
-        *(__IO uint16_t*) tmp = Data >> 16;
-    
-        /* Wait for last operation to be completed */
-        status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-        
-        /* Disable the PG Bit */
-        FLASH->CR2 &= CR_PG_Reset;
-      }
-      else
-      {
-        /* Disable the PG Bit */
-        FLASH->CR2 &= CR_PG_Reset;
-      }
-    }
-  }
-#else
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastOperation(ProgramTimeout);
-  
-  if(status == FLASH_COMPLETE)
-  {
-    /* if the previous operation is completed, proceed to program the new first 
-    half word */
-    FLASH->CR |= CR_PG_Set;
-  
-    *(__IO uint16_t*)Address = (uint16_t)Data;
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastOperation(ProgramTimeout);
- 
-    if(status == FLASH_COMPLETE)
-    {
-      /* if the previous operation is completed, proceed to program the new second 
-      half word */
-      tmp = Address + 2;
-
-      *(__IO uint16_t*) tmp = Data >> 16;
-    
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastOperation(ProgramTimeout);
-        
-      /* Disable the PG Bit */
-      FLASH->CR &= CR_PG_Reset;
-    }
-    else
-    {
-      /* Disable the PG Bit */
-      FLASH->CR &= CR_PG_Reset;
-    }
-  }         
-#endif /* STM32F10X_XL */
-   
-  /* Return the Program Status */
-  return status;
-}
-
-/**
-  * @brief  Programs a half word at a specified address.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  Address: specifies the address to be programmed.
-  * @param  Data: specifies the data to be programmed.
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. 
-  */
-FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
-{
-  FLASH_Status status = FLASH_COMPLETE;
-  /* Check the parameters */
-  assert_param(IS_FLASH_ADDRESS(Address));
-
-#ifdef STM32F10X_XL
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastOperation(ProgramTimeout);
-  
-  if(Address < FLASH_BANK1_END_ADDRESS)
-  {
-    if(status == FLASH_COMPLETE)
-    {
-      /* if the previous operation is completed, proceed to program the new data */
-      FLASH->CR |= CR_PG_Set;
-  
-      *(__IO uint16_t*)Address = Data;
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
-
-      /* Disable the PG Bit */
-      FLASH->CR &= CR_PG_Reset;
-    }
-  }
-  else
-  {
-    if(status == FLASH_COMPLETE)
-    {
-      /* if the previous operation is completed, proceed to program the new data */
-      FLASH->CR2 |= CR_PG_Set;
-  
-      *(__IO uint16_t*)Address = Data;
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-
-      /* Disable the PG Bit */
-      FLASH->CR2 &= CR_PG_Reset;
-    }
-  }
-#else
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastOperation(ProgramTimeout);
-  
-  if(status == FLASH_COMPLETE)
-  {
-    /* if the previous operation is completed, proceed to program the new data */
-    FLASH->CR |= CR_PG_Set;
-  
-    *(__IO uint16_t*)Address = Data;
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastOperation(ProgramTimeout);
-    
-    /* Disable the PG Bit */
-    FLASH->CR &= CR_PG_Reset;
-  } 
-#endif  /* STM32F10X_XL */
-  
-  /* Return the Program Status */
-  return status;
-}
-
-/**
-  * @brief  Programs a half word at a specified Option Byte Data address.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  Address: specifies the address to be programmed.
-  *   This parameter can be 0x1FFFF804 or 0x1FFFF806. 
-  * @param  Data: specifies the data to be programmed.
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. 
-  */
-FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data)
-{
-  FLASH_Status status = FLASH_COMPLETE;
-  /* Check the parameters */
-  assert_param(IS_OB_DATA_ADDRESS(Address));
-  status = FLASH_WaitForLastOperation(ProgramTimeout);
-
-  if(status == FLASH_COMPLETE)
-  {
-    /* Authorize the small information block programming */
-    FLASH->OPTKEYR = FLASH_KEY1;
-    FLASH->OPTKEYR = FLASH_KEY2;
-    /* Enables the Option Bytes Programming operation */
-    FLASH->CR |= CR_OPTPG_Set; 
-    *(__IO uint16_t*)Address = Data;
-    
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastOperation(ProgramTimeout);
-    if(status != FLASH_TIMEOUT)
-    {
-      /* if the program operation is completed, disable the OPTPG Bit */
-      FLASH->CR &= CR_OPTPG_Reset;
-    }
-  }
-  /* Return the Option Byte Data Program Status */
-  return status;
-}
-
-/**
-  * @brief  Write protects the desired pages
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  FLASH_Pages: specifies the address of the pages to be write protected.
-  *   This parameter can be:
-  *     @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31  
-  *     @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3
-  *       and FLASH_WRProt_Pages124to127
-  *     @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and
-  *       FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255
-  *     @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and
-  *       FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127    
-  *     @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and
-  *       FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511
-  *     @arg FLASH_WRProt_AllPages
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages)
-{
-  uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
-  
-  FLASH_Status status = FLASH_COMPLETE;
-  
-  /* Check the parameters */
-  assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages));
-  
-  FLASH_Pages = (uint32_t)(~FLASH_Pages);
-  WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask);
-  WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8);
-  WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16);
-  WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24);
-  
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastOperation(ProgramTimeout);
-  
-  if(status == FLASH_COMPLETE)
-  {
-    /* Authorizes the small information block programming */
-    FLASH->OPTKEYR = FLASH_KEY1;
-    FLASH->OPTKEYR = FLASH_KEY2;
-    FLASH->CR |= CR_OPTPG_Set;
-    if(WRP0_Data != 0xFF)
-    {
-      OB->WRP0 = WRP0_Data;
-      
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastOperation(ProgramTimeout);
-    }
-    if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF))
-    {
-      OB->WRP1 = WRP1_Data;
-      
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastOperation(ProgramTimeout);
-    }
-    if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF))
-    {
-      OB->WRP2 = WRP2_Data;
-      
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastOperation(ProgramTimeout);
-    }
-    
-    if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF))
-    {
-      OB->WRP3 = WRP3_Data;
-     
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastOperation(ProgramTimeout);
-    }
-          
-    if(status != FLASH_TIMEOUT)
-    {
-      /* if the program operation is completed, disable the OPTPG Bit */
-      FLASH->CR &= CR_OPTPG_Reset;
-    }
-  } 
-  /* Return the write protection operation Status */
-  return status;       
-}
-
-/**
-  * @brief  Enables or disables the read out protection.
-  * @note   If the user has already programmed the other option bytes before calling 
-  *   this function, he must re-program them since this function erases all option bytes.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  Newstate: new state of the ReadOut Protection.
-  *   This parameter can be: ENABLE or DISABLE.
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState)
-{
-  FLASH_Status status = FLASH_COMPLETE;
-  /* Check the parameters */
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-  status = FLASH_WaitForLastOperation(EraseTimeout);
-  if(status == FLASH_COMPLETE)
-  {
-    /* Authorizes the small information block programming */
-    FLASH->OPTKEYR = FLASH_KEY1;
-    FLASH->OPTKEYR = FLASH_KEY2;
-    FLASH->CR |= CR_OPTER_Set;
-    FLASH->CR |= CR_STRT_Set;
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastOperation(EraseTimeout);
-    if(status == FLASH_COMPLETE)
-    {
-      /* if the erase operation is completed, disable the OPTER Bit */
-      FLASH->CR &= CR_OPTER_Reset;
-      /* Enable the Option Bytes Programming operation */
-      FLASH->CR |= CR_OPTPG_Set; 
-      if(NewState != DISABLE)
-      {
-        OB->RDP = 0x00;
-      }
-      else
-      {
-        OB->RDP = RDP_Key;  
-      }
-      /* Wait for last operation to be completed */
-      status = FLASH_WaitForLastOperation(EraseTimeout); 
-    
-      if(status != FLASH_TIMEOUT)
-      {
-        /* if the program operation is completed, disable the OPTPG Bit */
-        FLASH->CR &= CR_OPTPG_Reset;
-      }
-    }
-    else 
-    {
-      if(status != FLASH_TIMEOUT)
-      {
-        /* Disable the OPTER Bit */
-        FLASH->CR &= CR_OPTER_Reset;
-      }
-    }
-  }
-  /* Return the protection operation Status */
-  return status;       
-}
-
-/**
-  * @brief  Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  OB_IWDG: Selects the IWDG mode
-  *   This parameter can be one of the following values:
-  *     @arg OB_IWDG_SW: Software IWDG selected
-  *     @arg OB_IWDG_HW: Hardware IWDG selected
-  * @param  OB_STOP: Reset event when entering STOP mode.
-  *   This parameter can be one of the following values:
-  *     @arg OB_STOP_NoRST: No reset generated when entering in STOP
-  *     @arg OB_STOP_RST: Reset generated when entering in STOP
-  * @param  OB_STDBY: Reset event when entering Standby mode.
-  *   This parameter can be one of the following values:
-  *     @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY
-  *     @arg OB_STDBY_RST: Reset generated when entering in STANDBY
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, 
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY)
-{
-  FLASH_Status status = FLASH_COMPLETE; 
-
-  /* Check the parameters */
-  assert_param(IS_OB_IWDG_SOURCE(OB_IWDG));
-  assert_param(IS_OB_STOP_SOURCE(OB_STOP));
-  assert_param(IS_OB_STDBY_SOURCE(OB_STDBY));
-
-  /* Authorize the small information block programming */
-  FLASH->OPTKEYR = FLASH_KEY1;
-  FLASH->OPTKEYR = FLASH_KEY2;
-  
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastOperation(ProgramTimeout);
-  
-  if(status == FLASH_COMPLETE)
-  {  
-    /* Enable the Option Bytes Programming operation */
-    FLASH->CR |= CR_OPTPG_Set; 
-           
-    OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8))); 
-  
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastOperation(ProgramTimeout);
-    if(status != FLASH_TIMEOUT)
-    {
-      /* if the program operation is completed, disable the OPTPG Bit */
-      FLASH->CR &= CR_OPTPG_Reset;
-    }
-  }    
-  /* Return the Option Byte program Status */
-  return status;
-}
-
-#ifdef STM32F10X_XL
-/**
-  * @brief  Configures to boot from Bank1 or Bank2.  
-  * @note   This function can be used only for STM32F10x_XL density devices.
-  * @param  FLASH_BOOT: select the FLASH Bank to boot from.
-  *   This parameter can be one of the following values:
-  *     @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash
-  *        position and this parameter is selected the device will boot from Bank1(Default).
-  *     @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash
-  *        position and this parameter is selected the device will boot from Bank2 or Bank1,
-  *        depending on the activation of the bank. The active banks are checked in
-  *        the following order: Bank2, followed by Bank1.
-  *        The active bank is recognized by the value programmed at the base address
-  *        of the respective bank (corresponding to the initial stack pointer value
-  *        in the interrupt vector table).
-  *        For more information, please refer to AN2606 from www.st.com.    
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, 
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT)
-{ 
-  FLASH_Status status = FLASH_COMPLETE; 
-  assert_param(IS_FLASH_BOOT(FLASH_BOOT));
-  /* Authorize the small information block programming */
-  FLASH->OPTKEYR = FLASH_KEY1;
-  FLASH->OPTKEYR = FLASH_KEY2;
-  
-  /* Wait for last operation to be completed */
-  status = FLASH_WaitForLastOperation(ProgramTimeout);
-  
-  if(status == FLASH_COMPLETE)
-  {  
-    /* Enable the Option Bytes Programming operation */
-    FLASH->CR |= CR_OPTPG_Set; 
-
-    if(FLASH_BOOT == FLASH_BOOT_Bank1)
-    {
-      OB->USER |= OB_USER_BFB2;
-    }
-    else
-    {
-      OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2));
-    }
-    /* Wait for last operation to be completed */
-    status = FLASH_WaitForLastOperation(ProgramTimeout);
-    if(status != FLASH_TIMEOUT)
-    {
-      /* if the program operation is completed, disable the OPTPG Bit */
-      FLASH->CR &= CR_OPTPG_Reset;
-    }
-  }    
-  /* Return the Option Byte program Status */
-  return status;
-}
-#endif /* STM32F10X_XL */
-
-/**
-  * @brief  Returns the FLASH User Option Bytes values.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  None
-  * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
-  *         and RST_STDBY(Bit2).
-  */
-uint32_t FLASH_GetUserOptionByte(void)
-{
-  /* Return the User Option Byte */
-  return (uint32_t)(FLASH->OBR >> 2);
-}
-
-/**
-  * @brief  Returns the FLASH Write Protection Option Bytes Register value.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  None
-  * @retval The FLASH Write Protection  Option Bytes Register value
-  */
-uint32_t FLASH_GetWriteProtectionOptionByte(void)
-{
-  /* Return the Flash write protection Register value */
-  return (uint32_t)(FLASH->WRPR);
-}
-
-/**
-  * @brief  Checks whether the FLASH Read Out Protection Status is set or not.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  None
-  * @retval FLASH ReadOut Protection Status(SET or RESET)
-  */
-FlagStatus FLASH_GetReadOutProtectionStatus(void)
-{
-  FlagStatus readoutstatus = RESET;
-  if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
-  {
-    readoutstatus = SET;
-  }
-  else
-  {
-    readoutstatus = RESET;
-  }
-  return readoutstatus;
-}
-
-/**
-  * @brief  Checks whether the FLASH Prefetch Buffer status is set or not.
-  * @note   This function can be used for all STM32F10x devices.
-  * @param  None
-  * @retval FLASH Prefetch Buffer Status (SET or RESET).
-  */
-FlagStatus FLASH_GetPrefetchBufferStatus(void)
-{
-  FlagStatus bitstatus = RESET;
-  
-  if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET)
-  {
-    bitstatus = SET;
-  }
-  else
-  {
-    bitstatus = RESET;
-  }
-  /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */
-  return bitstatus; 
-}
-
-/**
-  * @brief  Enables or disables the specified FLASH interrupts.
-  * @note   This function can be used for all STM32F10x devices.
-  *         - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts
-              for Bank1 and Bank2.
-  *         - For other devices it enables or disables the specified FLASH interrupts for Bank1.
-  * @param  FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled.
-  *   This parameter can be any combination of the following values:
-  *     @arg FLASH_IT_ERROR: FLASH Error Interrupt
-  *     @arg FLASH_IT_EOP: FLASH end of operation Interrupt
-  * @param  NewState: new state of the specified Flash interrupts.
-  *   This parameter can be: ENABLE or DISABLE.      
-  * @retval None 
-  */
-void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
-{
-#ifdef STM32F10X_XL
-  /* Check the parameters */
-  assert_param(IS_FLASH_IT(FLASH_IT)); 
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-
-  if((FLASH_IT & 0x80000000) != 0x0)
-  {
-    if(NewState != DISABLE)
-    {
-      /* Enable the interrupt sources */
-      FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF);
-    }
-    else
-    {
-      /* Disable the interrupt sources */
-      FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF);
-    }
-  }
-  else
-  {
-    if(NewState != DISABLE)
-    {
-      /* Enable the interrupt sources */
-      FLASH->CR |= FLASH_IT;
-    }
-    else
-    {
-      /* Disable the interrupt sources */
-      FLASH->CR &= ~(uint32_t)FLASH_IT;
-    }
-  }
-#else
-  /* Check the parameters */
-  assert_param(IS_FLASH_IT(FLASH_IT)); 
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-
-  if(NewState != DISABLE)
-  {
-    /* Enable the interrupt sources */
-    FLASH->CR |= FLASH_IT;
-  }
-  else
-  {
-    /* Disable the interrupt sources */
-    FLASH->CR &= ~(uint32_t)FLASH_IT;
-  }
-#endif /* STM32F10X_XL */
-}
-
-/**
-  * @brief  Checks whether the specified FLASH flag is set or not.
-  * @note   This function can be used for all STM32F10x devices.
-  *         - For STM32F10X_XL devices, this function checks whether the specified 
-  *           Bank1 or Bank2 flag is set or not.
-  *         - For other devices, it checks whether the specified Bank1 flag is 
-  *           set or not.
-  * @param  FLASH_FLAG: specifies the FLASH flag to check.
-  *   This parameter can be one of the following values:
-  *     @arg FLASH_FLAG_BSY: FLASH Busy flag           
-  *     @arg FLASH_FLAG_PGERR: FLASH Program error flag       
-  *     @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag      
-  *     @arg FLASH_FLAG_EOP: FLASH End of Operation flag           
-  *     @arg FLASH_FLAG_OPTERR:  FLASH Option Byte error flag     
-  * @retval The new state of FLASH_FLAG (SET or RESET).
-  */
-FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
-{
-  FlagStatus bitstatus = RESET;
-
-#ifdef STM32F10X_XL
-  /* Check the parameters */
-  assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
-  if(FLASH_FLAG == FLASH_FLAG_OPTERR) 
-  {
-    if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
-    {
-      bitstatus = SET;
-    }
-    else
-    {
-      bitstatus = RESET;
-    }
-  }
-  else
-  {
-    if((FLASH_FLAG & 0x80000000) != 0x0)
-    {
-      if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET)
-      {
-        bitstatus = SET;
-      }
-      else
-      {
-        bitstatus = RESET;
-      }
-    }
-    else
-    {
-      if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
-      {
-        bitstatus = SET;
-      }
-      else
-      {
-        bitstatus = RESET;
-      }
-    }
-  }
-#else
-  /* Check the parameters */
-  assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
-  if(FLASH_FLAG == FLASH_FLAG_OPTERR) 
-  {
-    if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
-    {
-      bitstatus = SET;
-    }
-    else
-    {
-      bitstatus = RESET;
-    }
-  }
-  else
-  {
-   if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
-    {
-      bitstatus = SET;
-    }
-    else
-    {
-      bitstatus = RESET;
-    }
-  }
-#endif /* STM32F10X_XL */
-
-  /* Return the new state of FLASH_FLAG (SET or RESET) */
-  return bitstatus;
-}
-
-/**
-  * @brief  Clears the FLASH's pending flags.
-  * @note   This function can be used for all STM32F10x devices.
-  *         - For STM32F10X_XL devices, this function clears Bank1 or Bank2’s pending flags
-  *         - For other devices, it clears Bank1’s pending flags.
-  * @param  FLASH_FLAG: specifies the FLASH flags to clear.
-  *   This parameter can be any combination of the following values:         
-  *     @arg FLASH_FLAG_PGERR: FLASH Program error flag       
-  *     @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag      
-  *     @arg FLASH_FLAG_EOP: FLASH End of Operation flag           
-  * @retval None
-  */
-void FLASH_ClearFlag(uint32_t FLASH_FLAG)
-{
-#ifdef STM32F10X_XL
-  /* Check the parameters */
-  assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
-
-  if((FLASH_FLAG & 0x80000000) != 0x0)
-  {
-    /* Clear the flags */
-    FLASH->SR2 = FLASH_FLAG;
-  }
-  else
-  {
-    /* Clear the flags */
-    FLASH->SR = FLASH_FLAG;
-  }  
-
-#else
-  /* Check the parameters */
-  assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
-  
-  /* Clear the flags */
-  FLASH->SR = FLASH_FLAG;
-#endif /* STM32F10X_XL */
-}
-
-/**
-  * @brief  Returns the FLASH Status.
-  * @note   This function can be used for all STM32F10x devices, it is equivalent
-  *         to FLASH_GetBank1Status function.
-  * @param  None
-  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP or FLASH_COMPLETE
-  */
-FLASH_Status FLASH_GetStatus(void)
-{
-  FLASH_Status flashstatus = FLASH_COMPLETE;
-  
-  if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) 
-  {
-    flashstatus = FLASH_BUSY;
-  }
-  else 
-  {  
-    if((FLASH->SR & FLASH_FLAG_PGERR) != 0)
-    { 
-      flashstatus = FLASH_ERROR_PG;
-    }
-    else 
-    {
-      if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 )
-      {
-        flashstatus = FLASH_ERROR_WRP;
-      }
-      else
-      {
-        flashstatus = FLASH_COMPLETE;
-      }
-    }
-  }
-  /* Return the Flash Status */
-  return flashstatus;
-}
-
-/**
-  * @brief  Returns the FLASH Bank1 Status.
-  * @note   This function can be used for all STM32F10x devices, it is equivalent
-  *         to FLASH_GetStatus function.
-  * @param  None
-  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP or FLASH_COMPLETE
-  */
-FLASH_Status FLASH_GetBank1Status(void)
-{
-  FLASH_Status flashstatus = FLASH_COMPLETE;
-  
-  if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY) 
-  {
-    flashstatus = FLASH_BUSY;
-  }
-  else 
-  {  
-    if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0)
-    { 
-      flashstatus = FLASH_ERROR_PG;
-    }
-    else 
-    {
-      if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 )
-      {
-        flashstatus = FLASH_ERROR_WRP;
-      }
-      else
-      {
-        flashstatus = FLASH_COMPLETE;
-      }
-    }
-  }
-  /* Return the Flash Status */
-  return flashstatus;
-}
-
-#ifdef STM32F10X_XL
-/**
-  * @brief  Returns the FLASH Bank2 Status.
-  * @note   This function can be used for STM32F10x_XL density devices.
-  * @param  None
-  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
-  *        FLASH_ERROR_WRP or FLASH_COMPLETE
-  */
-FLASH_Status FLASH_GetBank2Status(void)
-{
-  FLASH_Status flashstatus = FLASH_COMPLETE;
-  
-  if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) 
-  {
-    flashstatus = FLASH_BUSY;
-  }
-  else 
-  {  
-    if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0)
-    { 
-      flashstatus = FLASH_ERROR_PG;
-    }
-    else 
-    {
-      if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 )
-      {
-        flashstatus = FLASH_ERROR_WRP;
-      }
-      else
-      {
-        flashstatus = FLASH_COMPLETE;
-      }
-    }
-  }
-  /* Return the Flash Status */
-  return flashstatus;
-}
-#endif /* STM32F10X_XL */
-/**
-  * @brief  Waits for a Flash operation to complete or a TIMEOUT to occur.
-  * @note   This function can be used for all STM32F10x devices, 
-  *         it is equivalent to FLASH_WaitForLastBank1Operation.
-  *         - For STM32F10X_XL devices this function waits for a Bank1 Flash operation
-  *           to complete or a TIMEOUT to occur.
-  *         - For all other devices it waits for a Flash operation to complete 
-  *           or a TIMEOUT to occur.
-  * @param  Timeout: FLASH programming Timeout
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
-{ 
-  FLASH_Status status = FLASH_COMPLETE;
-   
-  /* Check for the Flash Status */
-  status = FLASH_GetBank1Status();
-  /* Wait for a Flash operation to complete or a TIMEOUT to occur */
-  while((status == FLASH_BUSY) && (Timeout != 0x00))
-  {
-    status = FLASH_GetBank1Status();
-    Timeout--;
-  }
-  if(Timeout == 0x00 )
-  {
-    status = FLASH_TIMEOUT;
-  }
-  /* Return the operation status */
-  return status;
-}
-
-/**
-  * @brief  Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
-  * @note   This function can be used for all STM32F10x devices, 
-  *         it is equivalent to FLASH_WaitForLastOperation.
-  * @param  Timeout: FLASH programming Timeout
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
-{ 
-  FLASH_Status status = FLASH_COMPLETE;
-   
-  /* Check for the Flash Status */
-  status = FLASH_GetBank1Status();
-  /* Wait for a Flash operation to complete or a TIMEOUT to occur */
-  while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00))
-  {
-    status = FLASH_GetBank1Status();
-    Timeout--;
-  }
-  if(Timeout == 0x00 )
-  {
-    status = FLASH_TIMEOUT;
-  }
-  /* Return the operation status */
-  return status;
-}
-
-#ifdef STM32F10X_XL
-/**
-  * @brief  Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur.
-  * @note   This function can be used only for STM32F10x_XL density devices.
-  * @param  Timeout: FLASH programming Timeout
-  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
-  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
-  */
-FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout)
-{ 
-  FLASH_Status status = FLASH_COMPLETE;
-   
-  /* Check for the Flash Status */
-  status = FLASH_GetBank2Status();
-  /* Wait for a Flash operation to complete or a TIMEOUT to occur */
-  while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00))
-  {
-    status = FLASH_GetBank2Status();
-    Timeout--;
-  }
-  if(Timeout == 0x00 )
-  {
-    status = FLASH_TIMEOUT;
-  }
-  /* Return the operation status */
-  return status;
-}
-#endif /* STM32F10X_XL */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/