o Moving tinyprintf and stm libraries under thirdparty.

1 files changed, 0 insertions, 650 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c
deleted file mode 100644
index 457ff11..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c
+++ /dev/null
@@ -1,650 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f10x_gpio.c
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    11-March-2011
-  * @brief   This file provides all the GPIO firmware functions.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_gpio.h"
-#include "stm32f10x_rcc.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Driver
-  * @{
-  */
-
-/** @defgroup GPIO 
-  * @brief GPIO driver modules
-  * @{
-  */ 
-
-/** @defgroup GPIO_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup GPIO_Private_Defines
-  * @{
-  */
-
-/* ------------ RCC registers bit address in the alias region ----------------*/
-#define AFIO_OFFSET                 (AFIO_BASE - PERIPH_BASE)
-
-/* --- EVENTCR Register -----*/
-
-/* Alias word address of EVOE bit */
-#define EVCR_OFFSET                 (AFIO_OFFSET + 0x00)
-#define EVOE_BitNumber              ((uint8_t)0x07)
-#define EVCR_EVOE_BB                (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4))
-
-
-/* ---  MAPR Register ---*/ 
-/* Alias word address of MII_RMII_SEL bit */ 
-#define MAPR_OFFSET                 (AFIO_OFFSET + 0x04) 
-#define MII_RMII_SEL_BitNumber      ((u8)0x17) 
-#define MAPR_MII_RMII_SEL_BB        (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
-
-
-#define EVCR_PORTPINCONFIG_MASK     ((uint16_t)0xFF80)
-#define LSB_MASK                    ((uint16_t)0xFFFF)
-#define DBGAFR_POSITION_MASK        ((uint32_t)0x000F0000)
-#define DBGAFR_SWJCFG_MASK          ((uint32_t)0xF0FFFFFF)
-#define DBGAFR_LOCATION_MASK        ((uint32_t)0x00200000)
-#define DBGAFR_NUMBITS_MASK         ((uint32_t)0x00100000)
-/**
-  * @}
-  */
-
-/** @defgroup GPIO_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup GPIO_Private_Variables
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup GPIO_Private_FunctionPrototypes
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup GPIO_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Deinitializes the GPIOx peripheral registers to their default reset values.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @retval None
-  */
-void GPIO_DeInit(GPIO_TypeDef* GPIOx)
-{
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-  
-  if (GPIOx == GPIOA)
-  {
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE);
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE);
-  }
-  else if (GPIOx == GPIOB)
-  {
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE);
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE);
-  }
-  else if (GPIOx == GPIOC)
-  {
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE);
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE);
-  }
-  else if (GPIOx == GPIOD)
-  {
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE);
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE);
-  }    
-  else if (GPIOx == GPIOE)
-  {
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE);
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE);
-  } 
-  else if (GPIOx == GPIOF)
-  {
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE);
-    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE);
-  }
-  else
-  {
-    if (GPIOx == GPIOG)
-    {
-      RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE);
-      RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE);
-    }
-  }
-}
-
-/**
-  * @brief  Deinitializes the Alternate Functions (remap, event control
-  *   and EXTI configuration) registers to their default reset values.
-  * @param  None
-  * @retval None
-  */
-void GPIO_AFIODeInit(void)
-{
-  RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE);
-  RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE);
-}
-
-/**
-  * @brief  Initializes the GPIOx peripheral according to the specified
-  *         parameters in the GPIO_InitStruct.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @param  GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that
-  *         contains the configuration information for the specified GPIO peripheral.
-  * @retval None
-  */
-void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
-{
-  uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00;
-  uint32_t tmpreg = 0x00, pinmask = 0x00;
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-  assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
-  assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));  
-  
-/*---------------------------- GPIO Mode Configuration -----------------------*/
-  currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F);
-  if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00)
-  { 
-    /* Check the parameters */
-    assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
-    /* Output mode */
-    currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed;
-  }
-/*---------------------------- GPIO CRL Configuration ------------------------*/
-  /* Configure the eight low port pins */
-  if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00)
-  {
-    tmpreg = GPIOx->CRL;
-    for (pinpos = 0x00; pinpos < 0x08; pinpos++)
-    {
-      pos = ((uint32_t)0x01) << pinpos;
-      /* Get the port pins position */
-      currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
-      if (currentpin == pos)
-      {
-        pos = pinpos << 2;
-        /* Clear the corresponding low control register bits */
-        pinmask = ((uint32_t)0x0F) << pos;
-        tmpreg &= ~pinmask;
-        /* Write the mode configuration in the corresponding bits */
-        tmpreg |= (currentmode << pos);
-        /* Reset the corresponding ODR bit */
-        if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
-        {
-          GPIOx->BRR = (((uint32_t)0x01) << pinpos);
-        }
-        else
-        {
-          /* Set the corresponding ODR bit */
-          if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
-          {
-            GPIOx->BSRR = (((uint32_t)0x01) << pinpos);
-          }
-        }
-      }
-    }
-    GPIOx->CRL = tmpreg;
-  }
-/*---------------------------- GPIO CRH Configuration ------------------------*/
-  /* Configure the eight high port pins */
-  if (GPIO_InitStruct->GPIO_Pin > 0x00FF)
-  {
-    tmpreg = GPIOx->CRH;
-    for (pinpos = 0x00; pinpos < 0x08; pinpos++)
-    {
-      pos = (((uint32_t)0x01) << (pinpos + 0x08));
-      /* Get the port pins position */
-      currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos);
-      if (currentpin == pos)
-      {
-        pos = pinpos << 2;
-        /* Clear the corresponding high control register bits */
-        pinmask = ((uint32_t)0x0F) << pos;
-        tmpreg &= ~pinmask;
-        /* Write the mode configuration in the corresponding bits */
-        tmpreg |= (currentmode << pos);
-        /* Reset the corresponding ODR bit */
-        if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
-        {
-          GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08));
-        }
-        /* Set the corresponding ODR bit */
-        if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
-        {
-          GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08));
-        }
-      }
-    }
-    GPIOx->CRH = tmpreg;
-  }
-}
-
-/**
-  * @brief  Fills each GPIO_InitStruct member with its default value.
-  * @param  GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will
-  *         be initialized.
-  * @retval None
-  */
-void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
-{
-  /* Reset GPIO init structure parameters values */
-  GPIO_InitStruct->GPIO_Pin  = GPIO_Pin_All;
-  GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz;
-  GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING;
-}
-
-/**
-  * @brief  Reads the specified input port pin.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @param  GPIO_Pin:  specifies the port bit to read.
-  *   This parameter can be GPIO_Pin_x where x can be (0..15).
-  * @retval The input port pin value.
-  */
-uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
-  uint8_t bitstatus = 0x00;
-  
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-  assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); 
-  
-  if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
-  {
-    bitstatus = (uint8_t)Bit_SET;
-  }
-  else
-  {
-    bitstatus = (uint8_t)Bit_RESET;
-  }
-  return bitstatus;
-}
-
-/**
-  * @brief  Reads the specified GPIO input data port.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @retval GPIO input data port value.
-  */
-uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
-{
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-  
-  return ((uint16_t)GPIOx->IDR);
-}
-
-/**
-  * @brief  Reads the specified output data port bit.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @param  GPIO_Pin:  specifies the port bit to read.
-  *   This parameter can be GPIO_Pin_x where x can be (0..15).
-  * @retval The output port pin value.
-  */
-uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
-  uint8_t bitstatus = 0x00;
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-  assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); 
-  
-  if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET)
-  {
-    bitstatus = (uint8_t)Bit_SET;
-  }
-  else
-  {
-    bitstatus = (uint8_t)Bit_RESET;
-  }
-  return bitstatus;
-}
-
-/**
-  * @brief  Reads the specified GPIO output data port.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @retval GPIO output data port value.
-  */
-uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
-{
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-    
-  return ((uint16_t)GPIOx->ODR);
-}
-
-/**
-  * @brief  Sets the selected data port bits.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @param  GPIO_Pin: specifies the port bits to be written.
-  *   This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
-  * @retval None
-  */
-void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-  assert_param(IS_GPIO_PIN(GPIO_Pin));
-  
-  GPIOx->BSRR = GPIO_Pin;
-}
-
-/**
-  * @brief  Clears the selected data port bits.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @param  GPIO_Pin: specifies the port bits to be written.
-  *   This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
-  * @retval None
-  */
-void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-  assert_param(IS_GPIO_PIN(GPIO_Pin));
-  
-  GPIOx->BRR = GPIO_Pin;
-}
-
-/**
-  * @brief  Sets or clears the selected data port bit.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @param  GPIO_Pin: specifies the port bit to be written.
-  *   This parameter can be one of GPIO_Pin_x where x can be (0..15).
-  * @param  BitVal: specifies the value to be written to the selected bit.
-  *   This parameter can be one of the BitAction enum values:
-  *     @arg Bit_RESET: to clear the port pin
-  *     @arg Bit_SET: to set the port pin
-  * @retval None
-  */
-void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
-{
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-  assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
-  assert_param(IS_GPIO_BIT_ACTION(BitVal)); 
-  
-  if (BitVal != Bit_RESET)
-  {
-    GPIOx->BSRR = GPIO_Pin;
-  }
-  else
-  {
-    GPIOx->BRR = GPIO_Pin;
-  }
-}
-
-/**
-  * @brief  Writes data to the specified GPIO data port.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @param  PortVal: specifies the value to be written to the port output data register.
-  * @retval None
-  */
-void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
-{
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-  
-  GPIOx->ODR = PortVal;
-}
-
-/**
-  * @brief  Locks GPIO Pins configuration registers.
-  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
-  * @param  GPIO_Pin: specifies the port bit to be written.
-  *   This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
-  * @retval None
-  */
-void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
-  uint32_t tmp = 0x00010000;
-  
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
-  assert_param(IS_GPIO_PIN(GPIO_Pin));
-  
-  tmp |= GPIO_Pin;
-  /* Set LCKK bit */
-  GPIOx->LCKR = tmp;
-  /* Reset LCKK bit */
-  GPIOx->LCKR =  GPIO_Pin;
-  /* Set LCKK bit */
-  GPIOx->LCKR = tmp;
-  /* Read LCKK bit*/
-  tmp = GPIOx->LCKR;
-  /* Read LCKK bit*/
-  tmp = GPIOx->LCKR;
-}
-
-/**
-  * @brief  Selects the GPIO pin used as Event output.
-  * @param  GPIO_PortSource: selects the GPIO port to be used as source
-  *   for Event output.
-  *   This parameter can be GPIO_PortSourceGPIOx where x can be (A..E).
-  * @param  GPIO_PinSource: specifies the pin for the Event output.
-  *   This parameter can be GPIO_PinSourcex where x can be (0..15).
-  * @retval None
-  */
-void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
-{
-  uint32_t tmpreg = 0x00;
-  /* Check the parameters */
-  assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource));
-  assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
-    
-  tmpreg = AFIO->EVCR;
-  /* Clear the PORT[6:4] and PIN[3:0] bits */
-  tmpreg &= EVCR_PORTPINCONFIG_MASK;
-  tmpreg |= (uint32_t)GPIO_PortSource << 0x04;
-  tmpreg |= GPIO_PinSource;
-  AFIO->EVCR = tmpreg;
-}
-
-/**
-  * @brief  Enables or disables the Event Output.
-  * @param  NewState: new state of the Event output.
-  *   This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void GPIO_EventOutputCmd(FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-  
-  *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState;
-}
-
-/**
-  * @brief  Changes the mapping of the specified pin.
-  * @param  GPIO_Remap: selects the pin to remap.
-  *   This parameter can be one of the following values:
-  *     @arg GPIO_Remap_SPI1             : SPI1 Alternate Function mapping
-  *     @arg GPIO_Remap_I2C1             : I2C1 Alternate Function mapping
-  *     @arg GPIO_Remap_USART1           : USART1 Alternate Function mapping
-  *     @arg GPIO_Remap_USART2           : USART2 Alternate Function mapping
-  *     @arg GPIO_PartialRemap_USART3    : USART3 Partial Alternate Function mapping
-  *     @arg GPIO_FullRemap_USART3       : USART3 Full Alternate Function mapping
-  *     @arg GPIO_PartialRemap_TIM1      : TIM1 Partial Alternate Function mapping
-  *     @arg GPIO_FullRemap_TIM1         : TIM1 Full Alternate Function mapping
-  *     @arg GPIO_PartialRemap1_TIM2     : TIM2 Partial1 Alternate Function mapping
-  *     @arg GPIO_PartialRemap2_TIM2     : TIM2 Partial2 Alternate Function mapping
-  *     @arg GPIO_FullRemap_TIM2         : TIM2 Full Alternate Function mapping
-  *     @arg GPIO_PartialRemap_TIM3      : TIM3 Partial Alternate Function mapping
-  *     @arg GPIO_FullRemap_TIM3         : TIM3 Full Alternate Function mapping
-  *     @arg GPIO_Remap_TIM4             : TIM4 Alternate Function mapping
-  *     @arg GPIO_Remap1_CAN1            : CAN1 Alternate Function mapping
-  *     @arg GPIO_Remap2_CAN1            : CAN1 Alternate Function mapping
-  *     @arg GPIO_Remap_PD01             : PD01 Alternate Function mapping
-  *     @arg GPIO_Remap_TIM5CH4_LSI      : LSI connected to TIM5 Channel4 input capture for calibration
-  *     @arg GPIO_Remap_ADC1_ETRGINJ     : ADC1 External Trigger Injected Conversion remapping
-  *     @arg GPIO_Remap_ADC1_ETRGREG     : ADC1 External Trigger Regular Conversion remapping
-  *     @arg GPIO_Remap_ADC2_ETRGINJ     : ADC2 External Trigger Injected Conversion remapping
-  *     @arg GPIO_Remap_ADC2_ETRGREG     : ADC2 External Trigger Regular Conversion remapping
-  *     @arg GPIO_Remap_ETH              : Ethernet remapping (only for Connectivity line devices)
-  *     @arg GPIO_Remap_CAN2             : CAN2 remapping (only for Connectivity line devices)
-  *     @arg GPIO_Remap_SWJ_NoJTRST      : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST
-  *     @arg GPIO_Remap_SWJ_JTAGDisable  : JTAG-DP Disabled and SW-DP Enabled
-  *     @arg GPIO_Remap_SWJ_Disable      : Full SWJ Disabled (JTAG-DP + SW-DP)
-  *     @arg GPIO_Remap_SPI3             : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices)
-  *                                        When the SPI3/I2S3 is remapped using this function, the SWJ is configured
-  *                                        to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST.   
-  *     @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected
-  *                                        to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices)
-  *                                        If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to 
-  *                                        Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output.    
-  *     @arg GPIO_Remap_PTP_PPS          : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices)
-  *     @arg GPIO_Remap_TIM15            : TIM15 Alternate Function mapping (only for Value line devices)
-  *     @arg GPIO_Remap_TIM16            : TIM16 Alternate Function mapping (only for Value line devices)
-  *     @arg GPIO_Remap_TIM17            : TIM17 Alternate Function mapping (only for Value line devices)
-  *     @arg GPIO_Remap_CEC              : CEC Alternate Function mapping (only for Value line devices)
-  *     @arg GPIO_Remap_TIM1_DMA         : TIM1 DMA requests mapping (only for Value line devices)
-  *     @arg GPIO_Remap_TIM9             : TIM9 Alternate Function mapping (only for XL-density devices)
-  *     @arg GPIO_Remap_TIM10            : TIM10 Alternate Function mapping (only for XL-density devices)
-  *     @arg GPIO_Remap_TIM11            : TIM11 Alternate Function mapping (only for XL-density devices)
-  *     @arg GPIO_Remap_TIM13            : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices)
-  *     @arg GPIO_Remap_TIM14            : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices)
-  *     @arg GPIO_Remap_FSMC_NADV        : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices)
-  *     @arg GPIO_Remap_TIM67_DAC_DMA    : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices)
-  *     @arg GPIO_Remap_TIM12            : TIM12 Alternate Function mapping (only for High density Value line devices)
-  *     @arg GPIO_Remap_MISC             : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, 
-  *                                        only for High density Value line devices)     
-  * @param  NewState: new state of the port pin remapping.
-  *   This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState)
-{
-  uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00;
-
-  /* Check the parameters */
-  assert_param(IS_GPIO_REMAP(GPIO_Remap));
-  assert_param(IS_FUNCTIONAL_STATE(NewState));  
-  
-  if((GPIO_Remap & 0x80000000) == 0x80000000)
-  {
-    tmpreg = AFIO->MAPR2;
-  }
-  else
-  {
-    tmpreg = AFIO->MAPR;
-  }
-
-  tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10;
-  tmp = GPIO_Remap & LSB_MASK;
-
-  if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK))
-  {
-    tmpreg &= DBGAFR_SWJCFG_MASK;
-    AFIO->MAPR &= DBGAFR_SWJCFG_MASK;
-  }
-  else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK)
-  {
-    tmp1 = ((uint32_t)0x03) << tmpmask;
-    tmpreg &= ~tmp1;
-    tmpreg |= ~DBGAFR_SWJCFG_MASK;
-  }
-  else
-  {
-    tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10));
-    tmpreg |= ~DBGAFR_SWJCFG_MASK;
-  }
-
-  if (NewState != DISABLE)
-  {
-    tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10));
-  }
-
-  if((GPIO_Remap & 0x80000000) == 0x80000000)
-  {
-    AFIO->MAPR2 = tmpreg;
-  }
-  else
-  {
-    AFIO->MAPR = tmpreg;
-  }  
-}
-
-/**
-  * @brief  Selects the GPIO pin used as EXTI Line.
-  * @param  GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines.
-  *   This parameter can be GPIO_PortSourceGPIOx where x can be (A..G).
-  * @param  GPIO_PinSource: specifies the EXTI line to be configured.
-  *   This parameter can be GPIO_PinSourcex where x can be (0..15).
-  * @retval None
-  */
-void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
-{
-  uint32_t tmp = 0x00;
-  /* Check the parameters */
-  assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource));
-  assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
-  
-  tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03));
-  AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp;
-  AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)));
-}
-
-/**
-  * @brief  Selects the Ethernet media interface.
-  * @note   This function applies only to STM32 Connectivity line devices.  
-  * @param  GPIO_ETH_MediaInterface: specifies the Media Interface mode.
-  *   This parameter can be one of the following values:
-  *     @arg GPIO_ETH_MediaInterface_MII: MII mode
-  *     @arg GPIO_ETH_MediaInterface_RMII: RMII mode    
-  * @retval None
-  */
-void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface) 
-{ 
-  assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface)); 
-
-  /* Configure MII_RMII selection bit */ 
-  *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface; 
-}
-  
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/