o Initial import.HEADmaster

18 files changed, 2684 insertions, 0 deletions

diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/arduino_primo.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/arduino_primo.h
new file mode 100644
index 0000000..0d56b7d
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/arduino_primo.h
@@ -0,0 +1,113 @@
+/**
+ * Copyright (c) 2016 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef ARDUINO_PRIMO_H
+#define ARDUINO_PRIMO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// LEDs definitions
+#define LEDS_NUMBER    1
+
+#define LED_1          20
+
+#define LEDS_ACTIVE_STATE 0
+
+#define LEDS_LIST { LED_1}
+
+#define BSP_LED_0      LED_1
+
+#define LEDS_INV_MASK  0
+
+#define BUTTONS_NUMBER 1
+
+#define BUTTON_START   7
+#define BUTTON_1       7
+#define BUTTON_STOP    7
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BUTTONS_LIST { BUTTON_1 }
+
+#define BSP_BUTTON_0   BUTTON_1
+
+#define RX_PIN_NUMBER  11
+#define TX_PIN_NUMBER  12
+#define CTS_PIN_NUMBER UART_PIN_DISCONNECTED
+#define RTS_PIN_NUMBER UART_PIN_DISCONNECTED
+#define HWFC           false
+
+#define BUZZER_PIN_NUMBER  8
+
+// Arduino board mappings
+#define ARDUINO_SCL_PIN             27    // SCL signal pin
+#define ARDUINO_SDA_PIN             26    // SDA signal pin
+#define ARDUINO_AREF_PIN            2     // Aref pin
+#define ARDUINO_13_PIN              25    // Digital pin 13
+#define ARDUINO_12_PIN              24    // Digital pin 12
+#define ARDUINO_11_PIN              23    // Digital pin 11
+#define ARDUINO_10_PIN              22    // Digital pin 10
+#define ARDUINO_9_PIN               20    // Digital pin 9
+#define ARDUINO_8_PIN               19    // Digital pin 8
+
+#define ARDUINO_7_PIN               18    // Digital pin 7
+#define ARDUINO_6_PIN               17    // Digital pin 6
+#define ARDUINO_5_PIN               16    // Digital pin 5
+#define ARDUINO_4_PIN               15    // Digital pin 4
+#define ARDUINO_3_PIN               14    // Digital pin 3
+#define ARDUINO_2_PIN               13    // Digital pin 2
+#define ARDUINO_1_PIN               12    // Digital pin 1
+#define ARDUINO_0_PIN               11    // Digital pin 0
+
+#define ARDUINO_A0_PIN              3     // Analog channel 0
+#define ARDUINO_A1_PIN              4     // Analog channel 1
+#define ARDUINO_A2_PIN              28    // Analog channel 2
+#define ARDUINO_A3_PIN              29    // Analog channel 3
+#define ARDUINO_A4_PIN              30    // Analog channel 4
+#define ARDUINO_A5_PIN              31    // Analog channel 5
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ARDUINO_PRIMO_H
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/boards.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/boards.c
new file mode 100644
index 0000000..3551fc9
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/boards.c
@@ -0,0 +1,228 @@
+/**
+ * Copyright (c) 2016 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#include "boards.h"
+#if defined(BOARDS_WITH_USB_DFU_TRIGGER) && defined(BOARD_PCA10059)
+#include "nrf_dfu_trigger_usb.h"
+#endif
+#include <stdint.h>
+#include <stdbool.h>
+
+#if LEDS_NUMBER > 0
+static const uint8_t m_board_led_list[LEDS_NUMBER] = LEDS_LIST;
+#endif
+
+#if BUTTONS_NUMBER > 0
+static const uint8_t m_board_btn_list[BUTTONS_NUMBER] = BUTTONS_LIST;
+#endif
+
+#if LEDS_NUMBER > 0
+bool bsp_board_led_state_get(uint32_t led_idx)
+{
+    ASSERT(led_idx < LEDS_NUMBER);
+    bool pin_set = nrf_gpio_pin_out_read(m_board_led_list[led_idx]) ? true : false;
+    return (pin_set == (LEDS_ACTIVE_STATE ? true : false));
+}
+
+void bsp_board_led_on(uint32_t led_idx)
+{
+        ASSERT(led_idx < LEDS_NUMBER);
+        nrf_gpio_pin_write(m_board_led_list[led_idx], LEDS_ACTIVE_STATE ? 1 : 0);
+}
+
+void bsp_board_led_off(uint32_t led_idx)
+{
+    ASSERT(led_idx < LEDS_NUMBER);
+    nrf_gpio_pin_write(m_board_led_list[led_idx], LEDS_ACTIVE_STATE ? 0 : 1);
+}
+
+void bsp_board_leds_off(void)
+{
+    uint32_t i;
+    for (i = 0; i < LEDS_NUMBER; ++i)
+    {
+        bsp_board_led_off(i);
+    }
+}
+
+void bsp_board_leds_on(void)
+{
+    uint32_t i;
+    for (i = 0; i < LEDS_NUMBER; ++i)
+    {
+        bsp_board_led_on(i);
+    }
+}
+
+void bsp_board_led_invert(uint32_t led_idx)
+{
+    ASSERT(led_idx < LEDS_NUMBER);
+    nrf_gpio_pin_toggle(m_board_led_list[led_idx]);
+}
+
+#if defined(BOARD_PCA10059)
+/**
+ * Function for configuring UICR_REGOUT0 register
+ * to set GPIO output voltage to 3.0V.
+ */
+static void gpio_output_voltage_setup(void)
+{
+    // Configure UICR_REGOUT0 register only if it is set to default value.
+    if ((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) ==
+        (UICR_REGOUT0_VOUT_DEFAULT << UICR_REGOUT0_VOUT_Pos))
+    {
+        NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen;
+        while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
+
+        NRF_UICR->REGOUT0 = (NRF_UICR->REGOUT0 & ~((uint32_t)UICR_REGOUT0_VOUT_Msk)) |
+                            (UICR_REGOUT0_VOUT_3V0 << UICR_REGOUT0_VOUT_Pos);
+
+        NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren;
+        while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
+
+        // System reset is needed to update UICR registers.
+        NVIC_SystemReset();
+    }
+}
+#endif
+
+static void bsp_board_leds_init(void)
+{
+    #if defined(BOARD_PCA10059)
+    // If nRF52 USB Dongle is powered from USB (high voltage mode),
+    // GPIO output voltage is set to 1.8 V by default, which is not
+    // enough to turn on green and blue LEDs. Therefore, GPIO voltage
+    // needs to be increased to 3.0 V by configuring the UICR register.
+    if (NRF_POWER->MAINREGSTATUS &
+       (POWER_MAINREGSTATUS_MAINREGSTATUS_High << POWER_MAINREGSTATUS_MAINREGSTATUS_Pos))
+    {
+        gpio_output_voltage_setup();
+    }
+    #endif
+
+    uint32_t i;
+    for (i = 0; i < LEDS_NUMBER; ++i)
+    {
+        nrf_gpio_cfg_output(m_board_led_list[i]);
+    }
+    bsp_board_leds_off();
+}
+
+uint32_t bsp_board_led_idx_to_pin(uint32_t led_idx)
+{
+    ASSERT(led_idx < LEDS_NUMBER);
+    return m_board_led_list[led_idx];
+}
+
+uint32_t bsp_board_pin_to_led_idx(uint32_t pin_number)
+{
+    uint32_t ret = 0xFFFFFFFF;
+    uint32_t i;
+    for (i = 0; i < LEDS_NUMBER; ++i)
+    {
+        if (m_board_led_list[i] == pin_number)
+        {
+            ret = i;
+            break;
+        }
+    }
+    return ret;
+}
+#endif //LEDS_NUMBER > 0
+
+#if BUTTONS_NUMBER > 0
+bool bsp_board_button_state_get(uint32_t button_idx)
+{
+    ASSERT(button_idx < BUTTONS_NUMBER);
+    bool pin_set = nrf_gpio_pin_read(m_board_btn_list[button_idx]) ? true : false;
+    return (pin_set == (BUTTONS_ACTIVE_STATE ? true : false));
+}
+
+static void bsp_board_buttons_init(void)
+{
+    uint32_t i;
+    for (i = 0; i < BUTTONS_NUMBER; ++i)
+    {
+        nrf_gpio_cfg_input(m_board_btn_list[i], BUTTON_PULL);
+    }
+}
+
+uint32_t bsp_board_pin_to_button_idx(uint32_t pin_number)
+{
+    uint32_t i;
+    uint32_t ret = 0xFFFFFFFF;
+    for (i = 0; i < BUTTONS_NUMBER; ++i)
+    {
+        if (m_board_btn_list[i] == pin_number)
+        {
+            ret = i;
+            break;
+        }
+    }
+    return ret;
+}
+
+uint32_t bsp_board_button_idx_to_pin(uint32_t button_idx)
+{
+    ASSERT(button_idx < BUTTONS_NUMBER);
+    return m_board_btn_list[button_idx];
+}
+#endif //BUTTONS_NUMBER > 0
+
+
+void bsp_board_init(uint32_t init_flags)
+{
+    #if defined(BOARDS_WITH_USB_DFU_TRIGGER) && defined(BOARD_PCA10059)
+    (void) nrf_dfu_trigger_usb_init();
+    #endif
+
+    #if LEDS_NUMBER > 0
+    if (init_flags & BSP_INIT_LEDS)
+    {
+        bsp_board_leds_init();
+    }
+    #endif //LEDS_NUMBER > 0
+
+    #if BUTTONS_NUMBER > 0
+    if (init_flags & BSP_INIT_BUTTONS)
+    {
+        bsp_board_buttons_init();
+    }
+    #endif //BUTTONS_NUMBER > 0
+}
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/boards.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/boards.h
new file mode 100644
index 0000000..4b56d56
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/boards.h
@@ -0,0 +1,355 @@
+/**
+ * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef BOARDS_H
+#define BOARDS_H
+
+#include "nrf_gpio.h"
+#include "nordic_common.h"
+
+#if defined(BOARD_NRF6310)
+  #include "nrf6310.h"
+#elif defined(BOARD_PCA10000)
+  #include "pca10000.h"
+#elif defined(BOARD_PCA10001)
+  #include "pca10001.h"
+#elif defined(BOARD_PCA10002)
+  #include "pca10000.h"
+#elif defined(BOARD_PCA10003)
+  #include "pca10003.h"
+#elif defined(BOARD_PCA20006)
+  #include "pca20006.h"
+#elif defined(BOARD_PCA10028)
+  #include "pca10028.h"
+#elif defined(BOARD_PCA10031)
+  #include "pca10031.h"
+#elif defined(BOARD_PCA10036)
+  #include "pca10036.h"
+#elif defined(BOARD_PCA10040)
+  #include "pca10040.h"
+#elif defined(BOARD_PCA10056)
+  #include "pca10056.h"
+#elif defined(BOARD_PCA20020)
+  #include "pca20020.h"
+#elif defined(BOARD_PCA10059)
+  #include "pca10059.h"
+#elif defined(BOARD_WT51822)
+  #include "wt51822.h"
+#elif defined(BOARD_N5DK1)
+  #include "n5_starterkit.h"
+#elif defined (BOARD_D52DK1)
+  #include "d52_starterkit.h"
+#elif defined (BOARD_ARDUINO_PRIMO)
+  #include "arduino_primo.h"
+#elif defined (CUSTOM_BOARD_INC)
+  #include STRINGIFY(CUSTOM_BOARD_INC.h)
+#elif defined(BOARD_CUSTOM)
+  #include "custom_board.h"
+#else
+#error "Board is not defined"
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@defgroup BSP_BOARD_INIT_FLAGS Board initialization flags.
+ * @{ */
+#define BSP_INIT_NONE    0        /**< No initialization of LEDs or buttons (@ref bsp_board_init).*/
+#define BSP_INIT_LEDS    (1 << 0) /**< Enable LEDs during initialization (@ref bsp_board_init).*/
+#define BSP_INIT_BUTTONS (1 << 1) /**< Enable buttons during initialization (@ref bsp_board_init).*/
+/**@} */
+
+/**
+ * Function for returning the state of an LED.
+ *
+ * @param led_idx LED index (starting from 0), as defined in the board-specific header.
+ *
+ * @return True if the LED is turned on.
+ */
+bool bsp_board_led_state_get(uint32_t led_idx);
+
+/**
+ * Function for turning on an LED.
+ *
+ * @param led_idx LED index (starting from 0), as defined in the board-specific header.
+ */
+void bsp_board_led_on(uint32_t led_idx);
+
+/**
+ * Function for turning off an LED.
+ *
+ * @param led_idx LED index (starting from 0), as defined in the board-specific header.
+ */
+void bsp_board_led_off(uint32_t led_idx);
+
+/**
+ * Function for inverting the state of an LED.
+ *
+ * @param led_idx LED index (starting from 0), as defined in the board-specific header.
+ */
+void bsp_board_led_invert(uint32_t led_idx);
+/**
+ * Function for turning off all LEDs.
+ */
+void bsp_board_leds_off(void);
+
+/**
+ * Function for turning on all LEDs.
+ */
+void bsp_board_leds_on(void);
+
+/**
+ * Function for initializing the BSP handling for the board.
+ *
+ * @note This also initializes the USB DFU trigger library if @ref BOARDS_WITH_USB_DFU_TRIGGER is 1.
+ *
+ * @param[in]  init_flags  Flags specifying what to initialize (LEDs/buttons).
+ *                         See @ref BSP_BOARD_INIT_FLAGS.
+ */
+void bsp_board_init(uint32_t init_flags);
+
+/**
+ * Function for converting pin number to LED index.
+ *
+ * @param pin_number Pin number.
+ *
+ * @return LED index of the given pin or 0xFFFFFFFF if invalid pin provided.
+ */
+uint32_t bsp_board_pin_to_led_idx(uint32_t pin_number);
+
+/**
+ * Function for converting LED index to pin number.
+ *
+ * @param led_idx LED index.
+ *
+ * @return Pin number.
+ */
+uint32_t bsp_board_led_idx_to_pin(uint32_t led_idx);
+
+/**
+ * Function for returning the state of a button.
+ *
+ * @param button_idx Button index (starting from 0), as defined in the board-specific header.
+ *
+ * @return True if the button is pressed.
+ */
+bool bsp_board_button_state_get(uint32_t button_idx);
+
+/**
+ * Function for converting pin number to button index.
+ *
+ * @param pin_number Pin number.
+ *
+ * @return Button index of the given pin or 0xFFFFFFFF if invalid pin provided.
+ */
+uint32_t bsp_board_pin_to_button_idx(uint32_t pin_number);
+
+
+/**
+ * Function for converting button index to pin number.
+ *
+ * @param button_idx Button index.
+ *
+ * @return Pin number.
+ */
+uint32_t bsp_board_button_idx_to_pin(uint32_t button_idx);
+
+#define BSP_BOARD_LED_0 0
+#define BSP_BOARD_LED_1 1
+#define BSP_BOARD_LED_2 2
+#define BSP_BOARD_LED_3 3
+#define BSP_BOARD_LED_4 4
+#define BSP_BOARD_LED_5 5
+#define BSP_BOARD_LED_6 6
+#define BSP_BOARD_LED_7 7
+
+#define PIN_MASK(_pin)  /*lint -save -e504 */                     \
+                        (1u << (uint32_t)((_pin) & (~P0_PIN_NUM))) \
+                        /*lint -restore    */
+
+#define PIN_PORT(_pin) (((_pin) >= P0_PIN_NUM) ? NRF_P1 : NRF_GPIO)
+
+#ifdef BSP_LED_0
+#define BSP_LED_0_MASK PIN_MASK(BSP_LED_0)
+#define BSP_LED_0_PORT PIN_PORT(BSP_LED_0)
+#else
+#define BSP_LED_0_MASK 0
+#define BSP_LED_0_PORT 0
+#endif
+#ifdef BSP_LED_1
+#define BSP_LED_1_MASK PIN_MASK(BSP_LED_1)
+#define BSP_LED_1_PORT PIN_PORT(BSP_LED_1)
+#else
+#define BSP_LED_1_MASK 0
+#define BSP_LED_1_PORT 0
+#endif
+#ifdef BSP_LED_2
+#define BSP_LED_2_MASK PIN_MASK(BSP_LED_2)
+#define BSP_LED_2_PORT PIN_PORT(BSP_LED_2)
+#else
+#define BSP_LED_2_MASK 0
+#define BSP_LED_2_PORT 0
+#endif
+#ifdef BSP_LED_3
+#define BSP_LED_3_MASK PIN_MASK(BSP_LED_3)
+#define BSP_LED_3_PORT PIN_PORT(BSP_LED_3)
+#else
+#define BSP_LED_3_MASK 0
+#define BSP_LED_3_PORT 0
+#endif
+#ifdef BSP_LED_4
+#define BSP_LED_4_MASK PIN_MASK(BSP_LED_4)
+#define BSP_LED_4_PORT PIN_PORT(BSP_LED_4)
+#else
+#define BSP_LED_4_MASK 0
+#define BSP_LED_4_PORT 0
+#endif
+#ifdef BSP_LED_5
+#define BSP_LED_5_MASK PIN_MASK(BSP_LED_5)
+#define BSP_LED_5_PORT PIN_PORT(BSP_LED_5)
+#else
+#define BSP_LED_5_MASK 0
+#define BSP_LED_5_PORT 0
+#endif
+#ifdef BSP_LED_6
+#define BSP_LED_6_MASK PIN_MASK(BSP_LED_6)
+#define BSP_LED_6_PORT PIN_PORT(BSP_LED_6)
+#else
+#define BSP_LED_6_MASK 0
+#define BSP_LED_6_PORT 0
+#endif
+#ifdef BSP_LED_7
+#define BSP_LED_7_MASK PIN_MASK(BSP_LED_7)
+#define BSP_LED_7_PORT PIN_PORT(BSP_LED_7)
+#else
+#define BSP_LED_7_MASK 0
+#define BSP_LED_7_PORT 0
+#endif
+
+
+#define LEDS_MASK      (BSP_LED_0_MASK | BSP_LED_1_MASK | \
+                        BSP_LED_2_MASK | BSP_LED_3_MASK | \
+                        BSP_LED_4_MASK | BSP_LED_5_MASK | \
+                        BSP_LED_6_MASK | BSP_LED_7_MASK)
+
+#define BSP_BOARD_BUTTON_0 0
+#define BSP_BOARD_BUTTON_1 1
+#define BSP_BOARD_BUTTON_2 2
+#define BSP_BOARD_BUTTON_3 3
+#define BSP_BOARD_BUTTON_4 4
+#define BSP_BOARD_BUTTON_5 5
+#define BSP_BOARD_BUTTON_6 6
+#define BSP_BOARD_BUTTON_7 7
+
+
+#ifdef BSP_BUTTON_0
+#define BSP_BUTTON_0_MASK (1<<BSP_BUTTON_0)
+#else
+#define BSP_BUTTON_0_MASK 0
+#endif
+#ifdef BSP_BUTTON_1
+#define BSP_BUTTON_1_MASK (1<<BSP_BUTTON_1)
+#else
+#define BSP_BUTTON_1_MASK 0
+#endif
+#ifdef BSP_BUTTON_2
+#define BSP_BUTTON_2_MASK (1<<BSP_BUTTON_2)
+#else
+#define BSP_BUTTON_2_MASK 0
+#endif
+#ifdef BSP_BUTTON_3
+#define BSP_BUTTON_3_MASK (1<<BSP_BUTTON_3)
+#else
+#define BSP_BUTTON_3_MASK 0
+#endif
+#ifdef BSP_BUTTON_4
+#define BSP_BUTTON_4_MASK (1<<BSP_BUTTON_4)
+#else
+#define BSP_BUTTON_4_MASK 0
+#endif
+#ifdef BSP_BUTTON_5
+#define BSP_BUTTON_5_MASK (1<<BSP_BUTTON_5)
+#else
+#define BSP_BUTTON_5_MASK 0
+#endif
+#ifdef BSP_BUTTON_6
+#define BSP_BUTTON_6_MASK (1<<BSP_BUTTON_6)
+#else
+#define BSP_BUTTON_6_MASK 0
+#endif
+#ifdef BSP_BUTTON_7
+#define BSP_BUTTON_7_MASK (1<<BSP_BUTTON_7)
+#else
+#define BSP_BUTTON_7_MASK 0
+#endif
+
+#define BUTTONS_MASK   (BSP_BUTTON_0_MASK | BSP_BUTTON_1_MASK | \
+                        BSP_BUTTON_2_MASK | BSP_BUTTON_3_MASK | \
+                        BSP_BUTTON_4_MASK | BSP_BUTTON_5_MASK | \
+                        BSP_BUTTON_6_MASK | BSP_BUTTON_7_MASK)
+
+
+#define LEDS_OFF(leds_mask) do {  ASSERT(sizeof(leds_mask) == 4);                     \
+                        NRF_GPIO->OUTSET = (leds_mask) & (LEDS_MASK & LEDS_INV_MASK); \
+                        NRF_GPIO->OUTCLR = (leds_mask) & (LEDS_MASK & ~LEDS_INV_MASK); } while (0)
+
+#define LEDS_ON(leds_mask) do {  ASSERT(sizeof(leds_mask) == 4);                     \
+                       NRF_GPIO->OUTCLR = (leds_mask) & (LEDS_MASK & LEDS_INV_MASK); \
+                       NRF_GPIO->OUTSET = (leds_mask) & (LEDS_MASK & ~LEDS_INV_MASK); } while (0)
+
+#define LED_IS_ON(leds_mask) ((leds_mask) & (NRF_GPIO->OUT ^ LEDS_INV_MASK) )
+
+#define LEDS_INVERT(leds_mask) do { uint32_t gpio_state = NRF_GPIO->OUT;      \
+                              ASSERT(sizeof(leds_mask) == 4);                 \
+                              NRF_GPIO->OUTSET = ((leds_mask) & ~gpio_state); \
+                              NRF_GPIO->OUTCLR = ((leds_mask) & gpio_state); } while (0)
+
+#define LEDS_CONFIGURE(leds_mask) do { uint32_t pin;                  \
+                                  ASSERT(sizeof(leds_mask) == 4);     \
+                                  for (pin = 0; pin < 32; pin++)      \
+                                      if ( (leds_mask) & (1 << pin) ) \
+                                          nrf_gpio_cfg_output(pin); } while (0)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/d52_starterkit.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/d52_starterkit.h
new file mode 100644
index 0000000..9c9d3cd
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/d52_starterkit.h
@@ -0,0 +1,148 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2016
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef D52STARTERKIT_H
+#define D52STARTERKIT_H
+
+#include "nrf_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// LEDs definitions for D52DK1
+#define LEDS_NUMBER    4
+
+// IO board active low leds
+// D52DK1 does not define LED_START or LED_STOP since the LEDS are not on sequential pins
+#define LED_A        24 //LED A on D52 Starter Kit IO Board
+#define LED_B        31 //LED B on D52 Starter Kit IO Board
+#define LED_C        17 //LED C on D52 Starter Kit IO Board
+#define LED_D        20 //LED D on D52 Starter Kit IO Board
+
+#define LEDS_ACTIVE_STATE 0
+
+#define LEDS_LIST { LED_A, LED_B, LED_C, LED_D }
+
+#define BSP_LED_0      LED_A
+#define BSP_LED_1      LED_B
+#define BSP_LED_2      LED_C
+#define BSP_LED_3      LED_D
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define BUTTONS_NUMBER 4
+
+// IO board pull-up buttons
+#define BUTTON_A     6  //BUTTON A on D52 Starter Kit IO Board
+#define BUTTON_B     7  //BUTTON B on D52 Starter Kit IO Board
+#define BUTTON_C     16 //BUTTON C on D52 Starter Kit IO Board
+#define BUTTON_D     19 //BUTTON D on D52 Starter Kit IO Board
+#define BUTTON_PULL  NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BSP_BUTTON_0   BUTTON_A
+#define BSP_BUTTON_1   BUTTON_B
+#define BSP_BUTTON_2   BUTTON_C
+#define BSP_BUTTON_3   BUTTON_D
+
+#define BUTTONS_LIST { BUTTON_A, BUTTON_B, BUTTON_C, BUTTON_D }
+
+// Battery board pull-up switches
+#define SWITCH_1     12 // Switch 1 on D52 Starter Kit Battery Board
+#define SWITCH_2     8  // Switch 2 on D52 Starter Kit Battery Board
+#define SWITCH_3     15 // Switch 3 on D52 Starter Kit Battery Board
+#define SWITCH_4     11 // Switch 4 on D52 Starter Kit Battery Board
+#define SWITCH_5     14 // Switch 5 on D52 Starter Kit Battery Board
+#define SWITCH_PULL  NRF_GPIO_PIN_PULLUP
+
+#define SWITCHES_NUMBER 5
+
+#define BSP_SWITCH_0 SWITCH_1
+#define BSP_SWITCH_1 SWITCH_2
+#define BSP_SWITCH_2 SWITCH_3
+#define BSP_SWITCH_3 SWITCH_4
+#define BSP_SWITCH_4 SWITCH_5
+
+#define BSP_SWITCH_0_MASK   (1<<BSP_SWITCH_0)
+#define BSP_SWITCH_1_MASK   (1<<BSP_SWITCH_1)
+#define BSP_SWITCH_2_MASK   (1<<BSP_SWITCH_2)
+#define BSP_SWITCH_3_MASK   (1<<BSP_SWITCH_3)
+#define BSP_SWITCH_4_MASK   (1<<BSP_SWITCH_4)
+
+#define SWITCHES_MASK (BSP_SWITCH_0_MASK | BSP_SWITCH_1_MASK | BSP_SWITCH_2_MASK | BSP_SWITCH_3_MASK | BSP_SWITCH_4_MASK)
+
+// D52DK1 does not have UART peripheral. Dummy defines for compilation.
+#define RX_PIN_NUMBER  UART_PIN_DISCONNECTED
+#define TX_PIN_NUMBER  UART_PIN_DISCONNECTED
+#define CTS_PIN_NUMBER UART_PIN_DISCONNECTED
+#define RTS_PIN_NUMBER UART_PIN_DISCONNECTED
+
+// serialization CONNECTIVITY board
+#define SER_CON_RX_PIN              22    // UART RX pin number.
+#define SER_CON_TX_PIN              23    // UART TX pin number.
+#define SER_CON_CTS_PIN             25    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN             2     // UART Request To Send pin number. Not used if HWFC is set to false.
+
+// serialization APPLICATION board - temp. setup for running serialized MEMU tests
+#define SER_APP_RX_PIN              23    // UART RX pin number.
+#define SER_APP_TX_PIN              22    // UART TX pin number.
+#define SER_APP_CTS_PIN             2     // UART Clear To Send pin number.
+#define SER_APP_RTS_PIN             25    // UART Request To Send pin number.
+
+
+#define SER_CONN_CHIP_RESET_PIN     11    // Pin used to reset connectivity chip
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/n5_starterkit.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/n5_starterkit.h
new file mode 100644
index 0000000..57d88f7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/n5_starterkit.h
@@ -0,0 +1,128 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef N5STARTERKIT_H
+#define N5STARTERKIT_H
+
+#include "nrf_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// LEDs definitions for N5DK1
+#define LEDS_NUMBER    4
+
+// IO board active low leds
+// N5DK1 does not define LED_START or LED_STOP since the LEDS are not on sequential pins
+#define LED_A        8  //LED A on N5 Starter Kit IO Board
+#define LED_B        3  //LED B on N5 Starter Kit IO Board
+#define LED_C        15 //LED C on N5 Starter Kit IO Board
+#define LED_D        30 //LED D on N5 Starter Kit IO Board
+
+#define LEDS_ACTIVE_STATE 0
+
+#define LEDS_LIST { LED_A, LED_B, LED_C, LED_D }
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define BSP_LED_0      LED_A
+#define BSP_LED_1      LED_B
+#define BSP_LED_2      LED_C
+#define BSP_LED_3      LED_D
+
+#define BUTTONS_NUMBER 4
+
+// IO board pull-up buttons
+#define BUTTON_A     23 //BUTTON A on N5 Starter Kit IO Board
+#define BUTTON_B     2  //BUTTON B on N5 Starter Kit IO Board
+#define BUTTON_C     12 //BUTTON C on N5 Starter Kit IO Board
+#define BUTTON_D     11 //BUTTON D on N5 Starter Kit IO Board
+#define BUTTON_PULL  NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BSP_BUTTON_0   BUTTON_A
+#define BSP_BUTTON_1   BUTTON_B
+#define BSP_BUTTON_2   BUTTON_C
+#define BSP_BUTTON_3   BUTTON_D
+
+#define BUTTONS_LIST { BUTTON_A, BUTTON_B, BUTTON_C, BUTTON_D }
+
+// Battery board pull-up switches
+#define SWITCH_1     5  // Switch 1 on N5 Starter Kit Battery Board
+#define SWITCH_2     0  // Switch 2 on N5 Starter Kit Battery Board
+#define SWITCH_3     6  // Switch 3 on N5 Starter Kit Battery Board
+#define SWITCH_4     24 // Switch 4 on N5 Starter Kit Battery Board
+#define SWITCH_5     9  // Switch 5 on N5 Starter Kit Battery Board
+#define SWITCH_PULL  NRF_GPIO_PIN_PULLUP
+
+#define SWITCHES_NUMBER 5
+
+#define BSP_SWITCH_0 SWITCH_1
+#define BSP_SWITCH_1 SWITCH_2
+#define BSP_SWITCH_2 SWITCH_3
+#define BSP_SWITCH_3 SWITCH_4
+#define BSP_SWITCH_4 SWITCH_5
+
+#define SWITCHES_MASK 0x01000261
+
+// N5DK1 does not have UART peripheral. Dummy defines for compilation.
+#define RX_PIN_NUMBER  UART_PIN_DISCONNECTED
+#define TX_PIN_NUMBER  UART_PIN_DISCONNECTED
+#define CTS_PIN_NUMBER UART_PIN_DISCONNECTED
+#define RTS_PIN_NUMBER UART_PIN_DISCONNECTED
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/nrf6310.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/nrf6310.h
new file mode 100644
index 0000000..b42e77e
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/nrf6310.h
@@ -0,0 +1,180 @@
+/**
+ * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef NRF6310_H__
+#define NRF6310_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED_START      8
+#define LED_0          8
+#define LED_1          9
+#define LED_2          10
+#define LED_3          11
+#define LED_4          12
+#define LED_5          13
+#define LED_6          14
+#define LED_7          15
+#define LED_STOP       15
+
+#define BSP_LED_0      LED_0
+#define BSP_LED_1      LED_1
+#define BSP_LED_2      LED_2
+#define BSP_LED_3      LED_3
+#define BSP_LED_4      LED_4
+#define BSP_LED_5      LED_5
+#define BSP_LED_6      LED_6
+#define BSP_LED_7      LED_7
+
+#define LEDS_ACTIVE_STATE 1
+
+#define BUTTON_START   0
+#define BUTTON_0       0
+#define BUTTON_1       1
+#define BUTTON_2       2
+#define BUTTON_3       3
+#define BUTTON_4       4
+#define BUTTON_5       5
+#define BUTTON_6       6
+#define BUTTON_7       7
+#define BUTTON_STOP    7
+#define BUTTON_PULL    NRF_GPIO_PIN_NOPULL
+
+#define BSP_BUTTON_0   BUTTON_0
+#define BSP_BUTTON_1   BUTTON_1
+#define BSP_BUTTON_2   BUTTON_2
+#define BSP_BUTTON_3   BUTTON_3
+#define BSP_BUTTON_4   BUTTON_4
+#define BSP_BUTTON_5   BUTTON_5
+#define BSP_BUTTON_6   BUTTON_6
+#define BSP_BUTTON_7   BUTTON_7
+
+#define BUTTONS_ACTIVE_STATE 1
+
+#define BUTTONS_LIST {BUTTON_0, BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4, BUTTON_5, BUTTON_6, BUTTON_7}
+#define LEDS_LIST {LED_0, LED_1, LED_2, LED_3, LED_4, LED_5, LED_6, LED_7}
+
+#define LEDS_INV_MASK  0x00000000
+
+#define BUTTONS_NUMBER 8
+#define LEDS_NUMBER    8
+
+#define RX_PIN_NUMBER  16    // UART RX pin number.
+#define TX_PIN_NUMBER  17    // UART TX pin number.
+#define CTS_PIN_NUMBER 18    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define RTS_PIN_NUMBER 19    // UART Request To Send pin number. Not used if HWFC is set to false.
+#define HWFC           false // UART hardware flow control.
+
+#define SPIS_MISO_PIN  20    // SPI MISO signal.
+#define SPIS_CSN_PIN   21    // SPI CSN signal.
+#define SPIS_MOSI_PIN  22    // SPI MOSI signal.
+#define SPIS_SCK_PIN   23    // SPI SCK signal.
+
+#define SPIM0_SCK_PIN       23u     /**< SPI clock GPIO pin number. */
+#define SPIM0_MOSI_PIN      20u     /**< SPI Master Out Slave In GPIO pin number. */
+#define SPIM0_MISO_PIN      22u     /**< SPI Master In Slave Out GPIO pin number. */
+#define SPIM0_SS_PIN        21u     /**< SPI Slave Select GPIO pin number. */
+
+#define SPIM1_SCK_PIN       16u     /**< SPI clock GPIO pin number. */
+#define SPIM1_MOSI_PIN      18u     /**< SPI Master Out Slave In GPIO pin number. */
+#define SPIM1_MISO_PIN      17u     /**< SPI Master In Slave Out GPIO pin number. */
+#define SPIM1_SS_PIN        19u     /**< SPI Slave Select GPIO pin number. */
+
+// serialization APPLICATION board
+#define SER_APP_RX_PIN              16    // UART RX pin number.
+#define SER_APP_TX_PIN              17    // UART TX pin number.
+#define SER_APP_CTS_PIN             18    // UART Clear To Send pin number.
+#define SER_APP_RTS_PIN             19    // UART Request To Send pin number.
+
+#if 0
+#define SER_APP_SPIM0_SCK_PIN       20     // SPI clock GPIO pin number.
+#define SER_APP_SPIM0_MOSI_PIN      17     // SPI Master Out Slave In GPIO pin number
+#define SER_APP_SPIM0_MISO_PIN      16     // SPI Master In Slave Out GPIO pin number
+#define SER_APP_SPIM0_SS_PIN        21     // SPI Slave Select GPIO pin number
+#define SER_APP_SPIM0_RDY_PIN       19     // SPI READY GPIO pin number
+#define SER_APP_SPIM0_REQ_PIN       18     // SPI REQUEST GPIO pin number
+#else
+#define SER_APP_SPIM0_SCK_PIN       23     // SPI clock GPIO pin number.
+#define SER_APP_SPIM0_MOSI_PIN      20     // SPI Master Out Slave In GPIO pin number
+#define SER_APP_SPIM0_MISO_PIN      22     // SPI Master In Slave Out GPIO pin number
+#define SER_APP_SPIM0_SS_PIN        21     // SPI Slave Select GPIO pin number
+#define SER_APP_SPIM0_RDY_PIN       29     // SPI READY GPIO pin number
+#define SER_APP_SPIM0_REQ_PIN       28     // SPI REQUEST GPIO pin number
+
+#endif
+
+// serialization CONNECTIVITY board
+#if 0
+#define SER_CON_RX_PIN              17    // UART RX pin number.
+#define SER_CON_TX_PIN              16    // UART TX pin number.
+#define SER_CON_CTS_PIN             19    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN             18    // UART Request To Send pin number. Not used if HWFC is set to false.
+#else
+#define SER_CON_RX_PIN              16    // UART RX pin number.
+#define SER_CON_TX_PIN              17    // UART TX pin number.
+#define SER_CON_CTS_PIN             18    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN             19    // UART Request To Send pin number. Not used if HWFC is set to false.
+#endif
+
+#if 0
+#define SER_CON_SPIS_SCK_PIN        20    // SPI SCK signal.
+#define SER_CON_SPIS_MISO_PIN       16    // SPI MISO signal.
+#define SER_CON_SPIS_MOSI_PIN       17    // SPI MOSI signal.
+#define SER_CON_SPIS_CSN_PIN        21    // SPI CSN signal.
+#define SER_CON_SPIS_RDY_PIN        19     // SPI READY GPIO pin number.
+#define SER_CON_SPIS_REQ_PIN        18     // SPI REQUEST GPIO pin number.
+#else
+#define SER_CON_SPIS_SCK_PIN        23    // SPI SCK signal.
+#define SER_CON_SPIS_MOSI_PIN       22    // SPI MOSI signal.
+#define SER_CON_SPIS_MISO_PIN       20    // SPI MISO signal.
+#define SER_CON_SPIS_CSN_PIN        21    // SPI CSN signal.
+#define SER_CON_SPIS_RDY_PIN        29     // SPI READY GPIO pin number.
+#define SER_CON_SPIS_REQ_PIN        28     // SPI REQUEST GPIO pin number.
+#endif
+
+#define SER_CONN_ASSERT_LED_PIN     LED_2
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  // NRF6310_H__
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10000.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10000.h
new file mode 100644
index 0000000..8423fbe
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10000.h
@@ -0,0 +1,98 @@
+/**
+ * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA10000_H
+#define PCA10000_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+// Definitions for PCA10000 v2.0.0 or higher
+#if 1
+
+#define LEDS_NUMBER    3
+
+// there is RGB LED on this board
+#define LED_RGB_RED    21
+#define LED_RGB_GREEN  22
+#define LED_RGB_BLUE   23
+
+#define LED_START  LED_RGB_RED
+#define BSP_LED_0  LED_RGB_RED
+#define BSP_LED_1  LED_RGB_GREEN
+#define BSP_LED_2  LED_RGB_BLUE
+#define LED_STOP   LED_RGB_BLUE
+
+#define LEDS_ACTIVE_STATE 0
+
+#define BUTTONS_LIST {}
+#define LEDS_LIST { LED_RGB_RED, LED_RGB_GREEN, LED_RGB_BLUE }
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+// there are no buttons on this board
+#define BUTTONS_NUMBER 0
+
+// UART pins connected to J-Link
+#define RX_PIN_NUMBER  11
+#define TX_PIN_NUMBER  9
+#define CTS_PIN_NUMBER 10
+#define RTS_PIN_NUMBER 8
+#define HWFC           true
+
+// Definitions for PCA10000 v1.0
+#else
+
+#define RX_PIN_NUMBER  3
+#define TX_PIN_NUMBER  1
+#define CTS_PIN_NUMBER 2
+#define RTS_PIN_NUMBER 0
+#define HWFC           true
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10001.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10001.h
new file mode 100644
index 0000000..5e492d9
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10001.h
@@ -0,0 +1,165 @@
+/**
+ * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA10001_H
+#define PCA10001_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+#define LED_START      18
+#define LED_0          18
+#define LED_1          19
+#define LED_STOP       19
+
+#define LEDS_ACTIVE_STATE 1
+
+#define BSP_LED_0      LED_0
+#define BSP_LED_1      LED_1
+
+#define LEDS_INV_MASK  0x00000000
+
+#define BUTTON_START   16
+#define BUTTON_0       16
+#define BUTTON_1       17
+#define BUTTON_STOP    17
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BSP_BUTTON_0   BUTTON_0
+#define BSP_BUTTON_1   BUTTON_1
+
+#define BUTTONS_NUMBER 2
+#define LEDS_NUMBER    2
+
+#define BUTTONS_LIST { BUTTON_0, BUTTON_1 }
+#define LEDS_LIST { LED_0, LED_1 }
+
+#define RX_PIN_NUMBER  11
+#define TX_PIN_NUMBER  9
+#define CTS_PIN_NUMBER 10
+#define RTS_PIN_NUMBER 8
+#define HWFC           true
+
+#define SPIS_MISO_PIN  20    // SPI MISO signal.
+#define SPIS_CSN_PIN   21    // SPI CSN signal.
+#define SPIS_MOSI_PIN  22    // SPI MOSI signal.
+#define SPIS_SCK_PIN   23    // SPI SCK signal.
+
+#define SPIM0_SCK_PIN       23u     /**< SPI clock GPIO pin number. */
+#define SPIM0_MOSI_PIN      20u     /**< SPI Master Out Slave In GPIO pin number. */
+#define SPIM0_MISO_PIN      22u     /**< SPI Master In Slave Out GPIO pin number. */
+#define SPIM0_SS_PIN        21u     /**< SPI Slave Select GPIO pin number. */
+
+#define SPIM1_SCK_PIN       29u     /**< SPI clock GPIO pin number. */
+#define SPIM1_MOSI_PIN      24u     /**< SPI Master Out Slave In GPIO pin number. */
+#define SPIM1_MISO_PIN      28u     /**< SPI Master In Slave Out GPIO pin number. */
+#define SPIM1_SS_PIN        25u     /**< SPI Slave Select GPIO pin number. */
+
+// serialization APPLICATION board
+
+// UART
+// this configuration works with the SPI wires setup
+#define SER_APP_RX_PIN              20     // UART RX pin number.
+#define SER_APP_TX_PIN              22     // UART TX pin number.
+#define SER_APP_CTS_PIN             23     // UART Clear To Send pin number.
+#define SER_APP_RTS_PIN             21     // UART Request To Send pin number.
+
+// SPI
+#if 0
+#define SER_APP_SPIM0_SCK_PIN       20     // SPI clock GPIO pin number.
+#define SER_APP_SPIM0_MOSI_PIN      17     // SPI Master Out Slave In GPIO pin number
+#define SER_APP_SPIM0_MISO_PIN      16     // SPI Master In Slave Out GPIO pin number
+#define SER_APP_SPIM0_SS_PIN        21     // SPI Slave Select GPIO pin number
+#define SER_APP_SPIM0_RDY_PIN       19     // SPI READY GPIO pin number
+#define SER_APP_SPIM0_REQ_PIN       18     // SPI REQUEST GPIO pin number
+#else
+#define SER_APP_SPIM0_SCK_PIN       23     // SPI clock GPIO pin number.
+#define SER_APP_SPIM0_MOSI_PIN      20     // SPI Master Out Slave In GPIO pin number
+#define SER_APP_SPIM0_MISO_PIN      22     // SPI Master In Slave Out GPIO pin number
+#define SER_APP_SPIM0_SS_PIN        21     // SPI Slave Select GPIO pin number
+#define SER_APP_SPIM0_RDY_PIN       25     // SPI READY GPIO pin number
+#define SER_APP_SPIM0_REQ_PIN       24     // SPI REQUEST GPIO pin number
+#endif
+
+// serialization CONNECTIVITY board
+
+// UART
+#if 0
+#define SER_CON_RX_PIN              22    // UART RX pin number.
+#define SER_CON_TX_PIN              20    // UART TX pin number.
+#define SER_CON_CTS_PIN             21    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN             23    // UART Request To Send pin number. Not used if HWFC is set to false.
+#else
+// this configuration works with the SPI wires setup
+#define SER_CON_RX_PIN              20    // UART RX pin number.
+#define SER_CON_TX_PIN              22    // UART TX pin number.
+#define SER_CON_CTS_PIN             21    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN             23    // UART Request To Send pin number. Not used if HWFC is set to false.
+#endif
+
+//SPI
+#if 0
+#define SER_CON_SPIS_SCK_PIN        20    // SPI SCK signal.
+#define SER_CON_SPIS_MISO_PIN       16    // SPI MISO signal.
+#define SER_CON_SPIS_MOSI_PIN       17    // SPI MOSI signal.
+#define SER_CON_SPIS_CSN_PIN        21    // SPI CSN signal.
+#define SER_CON_SPIS_RDY_PIN        19     // SPI READY GPIO pin number.
+#define SER_CON_SPIS_REQ_PIN        18     // SPI REQUEST GPIO pin number.
+#else
+#define SER_CON_SPIS_SCK_PIN        23    // SPI SCK signal.
+#define SER_CON_SPIS_MOSI_PIN       22    // SPI MOSI signal.
+#define SER_CON_SPIS_MISO_PIN       20    // SPI MISO signal.
+#define SER_CON_SPIS_CSN_PIN        21    // SPI CSN signal.
+#define SER_CON_SPIS_RDY_PIN        25     // SPI READY GPIO pin number.
+#define SER_CON_SPIS_REQ_PIN        24     // SPI REQUEST GPIO pin number.
+#endif
+
+#define SER_CONN_ASSERT_LED_PIN     LED_0
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10003.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10003.h
new file mode 100644
index 0000000..834d1ed
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10003.h
@@ -0,0 +1,89 @@
+/**
+ * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA10003_H
+#define PCA10003_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+#define LED_START      18
+#define LED_0          18
+#define LED_1          19
+#define LED_STOP       19
+
+#define LEDS_ACTIVE_STATE 1
+
+#define LEDS_INV_MASK  0x00000000
+
+#define BSP_LED_0      LED_0
+#define BSP_LED_1      LED_1
+
+#define BUTTON_START   16
+#define BUTTON_0       16
+#define BUTTON_1       17
+#define BUTTON_STOP    17
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BSP_BUTTON_0   BUTTON_0
+#define BSP_BUTTON_1   BUTTON_1
+
+#define BUTTONS_NUMBER 2
+#define LEDS_NUMBER    2
+#define LEDS_LIST { LED_0, LED_1 }
+
+#define BUTTONS_LIST { BUTTON_0, BUTTON_1 }
+
+#define RX_PIN_NUMBER  11
+#define TX_PIN_NUMBER  9
+#define CTS_PIN_NUMBER 10
+#define RTS_PIN_NUMBER 8
+#define HWFC           true
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10028.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10028.h
new file mode 100644
index 0000000..a20fd49
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10028.h
@@ -0,0 +1,171 @@
+/**
+ * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA10028_H
+#define PCA10028_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+// LEDs definitions for PCA10028
+#define LEDS_NUMBER    4
+
+#define LED_START      21
+#define LED_1          21
+#define LED_2          22
+#define LED_3          23
+#define LED_4          24
+#define LED_STOP       24
+
+#define LEDS_ACTIVE_STATE 0
+
+#define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define BSP_LED_0      LED_1
+#define BSP_LED_1      LED_2
+#define BSP_LED_2      LED_3
+#define BSP_LED_3      LED_4
+
+#define BUTTONS_NUMBER 4
+
+#define BUTTON_START   17
+#define BUTTON_1       17
+#define BUTTON_2       18
+#define BUTTON_3       19
+#define BUTTON_4       20
+#define BUTTON_STOP    20
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }
+
+#define BSP_BUTTON_0   BUTTON_1
+#define BSP_BUTTON_1   BUTTON_2
+#define BSP_BUTTON_2   BUTTON_3
+#define BSP_BUTTON_3   BUTTON_4
+
+#define RX_PIN_NUMBER  11
+#define TX_PIN_NUMBER  9
+#define CTS_PIN_NUMBER 10
+#define RTS_PIN_NUMBER 8
+#define HWFC           true
+
+#define SPIS_MISO_PIN  28    // SPI MISO signal.
+#define SPIS_CSN_PIN   12    // SPI CSN signal.
+#define SPIS_MOSI_PIN  25    // SPI MOSI signal.
+#define SPIS_SCK_PIN   29    // SPI SCK signal.
+
+#define SPIM0_SCK_PIN       4     /**< SPI clock GPIO pin number. */
+#define SPIM0_MOSI_PIN      1     /**< SPI Master Out Slave In GPIO pin number. */
+#define SPIM0_MISO_PIN      3     /**< SPI Master In Slave Out GPIO pin number. */
+#define SPIM0_SS_PIN        2     /**< SPI Slave Select GPIO pin number. */
+
+#define SPIM1_SCK_PIN       15     /**< SPI clock GPIO pin number. */
+#define SPIM1_MOSI_PIN      12     /**< SPI Master Out Slave In GPIO pin number. */
+#define SPIM1_MISO_PIN      14     /**< SPI Master In Slave Out GPIO pin number. */
+#define SPIM1_SS_PIN        13     /**< SPI Slave Select GPIO pin number. */
+
+// serialization APPLICATION board
+#define SER_CONN_CHIP_RESET_PIN     12    // Pin used to reset connectivity chip
+
+#define SER_APP_RX_PIN              25    // UART RX pin number.
+#define SER_APP_TX_PIN              28    // UART TX pin number.
+#define SER_APP_CTS_PIN             0     // UART Clear To Send pin number.
+#define SER_APP_RTS_PIN             29    // UART Request To Send pin number.
+
+#define SER_APP_SPIM0_SCK_PIN       7     // SPI clock GPIO pin number.
+#define SER_APP_SPIM0_MOSI_PIN      0     // SPI Master Out Slave In GPIO pin number
+#define SER_APP_SPIM0_MISO_PIN      30    // SPI Master In Slave Out GPIO pin number
+#define SER_APP_SPIM0_SS_PIN        25    // SPI Slave Select GPIO pin number
+#define SER_APP_SPIM0_RDY_PIN       29    // SPI READY GPIO pin number
+#define SER_APP_SPIM0_REQ_PIN       28    // SPI REQUEST GPIO pin number
+
+// serialization CONNECTIVITY board
+#define SER_CON_RX_PIN              28    // UART RX pin number.
+#define SER_CON_TX_PIN              25    // UART TX pin number.
+#define SER_CON_CTS_PIN             29    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN             0    // UART Request To Send pin number. Not used if HWFC is set to false.
+
+
+#define SER_CON_SPIS_SCK_PIN        7     // SPI SCK signal.
+#define SER_CON_SPIS_MOSI_PIN       0     // SPI MOSI signal.
+#define SER_CON_SPIS_MISO_PIN       30    // SPI MISO signal.
+#define SER_CON_SPIS_CSN_PIN        25    // SPI CSN signal.
+#define SER_CON_SPIS_RDY_PIN        29    // SPI READY GPIO pin number.
+#define SER_CON_SPIS_REQ_PIN        28    // SPI REQUEST GPIO pin number.
+
+// Arduino board mappings
+#define ARDUINO_SCL_PIN             7     // SCL signal pin
+#define ARDUINO_SDA_PIN             30    // SDA signal pin
+#define ARDUINO_AREF_PIN            0     // Aref pin
+#define ARDUINO_13_PIN              29    // Digital pin 13
+#define ARDUINO_12_PIN              28    // Digital pin 12
+#define ARDUINO_11_PIN              25    // Digital pin 11
+#define ARDUINO_10_PIN              24    // Digital pin 10
+#define ARDUINO_9_PIN               23    // Digital pin 9
+#define ARDUINO_8_PIN               20    // Digital pin 8
+
+#define ARDUINO_7_PIN               19    // Digital pin 7
+#define ARDUINO_6_PIN               18    // Digital pin 6
+#define ARDUINO_5_PIN               17    // Digital pin 5
+#define ARDUINO_4_PIN               16    // Digital pin 4
+#define ARDUINO_3_PIN               15    // Digital pin 3
+#define ARDUINO_2_PIN               14    // Digital pin 2
+#define ARDUINO_1_PIN               13    // Digital pin 1
+#define ARDUINO_0_PIN               12    // Digital pin 0
+
+#define ARDUINO_A0_PIN              1     // Analog channel 0
+#define ARDUINO_A1_PIN              2     // Analog channel 1
+#define ARDUINO_A2_PIN              3     // Analog channel 2
+#define ARDUINO_A3_PIN              4     // Analog channel 3
+#define ARDUINO_A4_PIN              5     // Analog channel 4
+#define ARDUINO_A5_PIN              6     // Analog channel 5
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // PCA10028_H
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10031.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10031.h
new file mode 100644
index 0000000..d335941
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10031.h
@@ -0,0 +1,88 @@
+/**
+ * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA10031_H
+#define PCA10031_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+// LEDs definitions for PCA10031
+#define LEDS_NUMBER    3
+
+#define LED_START      21
+#define LED_RGB_RED    21
+#define LED_RGB_GREEN  22
+#define LED_RGB_BLUE   23
+#define LED_STOP       23
+
+#define LEDS_ACTIVE_STATE 1
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define LED_RGB_RED_MASK    (1<<LED_RGB_RED)
+#define LED_RGB_GREEN_MASK  (1<<LED_RGB_GREEN)
+#define LED_RGB_BLUE_MASK   (1<<LED_RGB_BLUE)
+
+#define LEDS_LIST { LED_RGB_RED, LED_RGB_GREEN, LED_RGB_BLUE}
+// defining RGB led as 3 single LEDs
+#define BSP_LED_0 LED_RGB_RED
+#define BSP_LED_1 LED_RGB_GREEN
+#define BSP_LED_2 LED_RGB_BLUE
+
+// there are no user buttons
+#define BUTTONS_NUMBER 0
+#define BUTTONS_LIST {}
+
+// UART connection with J-Link
+#define RX_PIN_NUMBER  11
+#define TX_PIN_NUMBER  9
+#define CTS_PIN_NUMBER 10
+#define RTS_PIN_NUMBER 8
+#define HWFC           true
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10036.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10036.h
new file mode 100644
index 0000000..cbb12f2
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10036.h
@@ -0,0 +1,176 @@
+/**
+ * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA10036_H
+#define PCA10036_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+// LEDs definitions for PCA10036
+#define LEDS_NUMBER    4
+
+#define LED_START      17
+#define LED_1          17
+#define LED_2          18
+#define LED_3          19
+#define LED_4          20
+#define LED_STOP       20
+
+#define LEDS_ACTIVE_STATE 0
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
+
+#define BSP_LED_0      LED_1
+#define BSP_LED_1      LED_2
+#define BSP_LED_2      LED_3
+#define BSP_LED_3      LED_4
+
+#define BUTTONS_NUMBER 4
+
+#define BUTTON_START   13
+#define BUTTON_1       13
+#define BUTTON_2       14
+#define BUTTON_3       15
+#define BUTTON_4       16
+#define BUTTON_STOP    16
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }
+
+#define BSP_BUTTON_0   BUTTON_1
+#define BSP_BUTTON_1   BUTTON_2
+#define BSP_BUTTON_2   BUTTON_3
+#define BSP_BUTTON_3   BUTTON_4
+
+#define RX_PIN_NUMBER  8
+#define TX_PIN_NUMBER  6
+#define CTS_PIN_NUMBER 7
+#define RTS_PIN_NUMBER 5
+#define HWFC           true
+
+#define SPIS_MISO_PIN   28  // SPI MISO signal.
+#define SPIS_CSN_PIN    12  // SPI CSN signal.
+#define SPIS_MOSI_PIN   25  // SPI MOSI signal.
+#define SPIS_SCK_PIN    29  // SPI SCK signal.
+
+#define SPIM0_SCK_PIN   29  // SPI clock GPIO pin number.
+#define SPIM0_MOSI_PIN  25  // SPI Master Out Slave In GPIO pin number.
+#define SPIM0_MISO_PIN  28  // SPI Master In Slave Out GPIO pin number.
+#define SPIM0_SS_PIN    12  // SPI Slave Select GPIO pin number.
+
+#define SPIM1_SCK_PIN   2   // SPI clock GPIO pin number.
+#define SPIM1_MOSI_PIN  3   // SPI Master Out Slave In GPIO pin number.
+#define SPIM1_MISO_PIN  4   // SPI Master In Slave Out GPIO pin number.
+#define SPIM1_SS_PIN    5   // SPI Slave Select GPIO pin number.
+
+#define SPIM2_SCK_PIN   12  // SPI clock GPIO pin number.
+#define SPIM2_MOSI_PIN  13  // SPI Master Out Slave In GPIO pin number.
+#define SPIM2_MISO_PIN  14  // SPI Master In Slave Out GPIO pin number.
+#define SPIM2_SS_PIN    15  // SPI Slave Select GPIO pin number.
+
+// serialization APPLICATION board - temp. setup for running serialized MEMU tests
+#define SER_APP_RX_PIN              23    // UART RX pin number.
+#define SER_APP_TX_PIN              24    // UART TX pin number.
+#define SER_APP_CTS_PIN             2     // UART Clear To Send pin number.
+#define SER_APP_RTS_PIN             25    // UART Request To Send pin number.
+
+#define SER_APP_SPIM0_SCK_PIN       27     // SPI clock GPIO pin number.
+#define SER_APP_SPIM0_MOSI_PIN      2      // SPI Master Out Slave In GPIO pin number
+#define SER_APP_SPIM0_MISO_PIN      26     // SPI Master In Slave Out GPIO pin number
+#define SER_APP_SPIM0_SS_PIN        23     // SPI Slave Select GPIO pin number
+#define SER_APP_SPIM0_RDY_PIN       25     // SPI READY GPIO pin number
+#define SER_APP_SPIM0_REQ_PIN       24     // SPI REQUEST GPIO pin number
+
+// serialization CONNECTIVITY board
+#define SER_CON_RX_PIN              24    // UART RX pin number.
+#define SER_CON_TX_PIN              23    // UART TX pin number.
+#define SER_CON_CTS_PIN             25    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN             2     // UART Request To Send pin number. Not used if HWFC is set to false.
+
+
+#define SER_CON_SPIS_SCK_PIN        27    // SPI SCK signal.
+#define SER_CON_SPIS_MOSI_PIN       2     // SPI MOSI signal.
+#define SER_CON_SPIS_MISO_PIN       26    // SPI MISO signal.
+#define SER_CON_SPIS_CSN_PIN        23    // SPI CSN signal.
+#define SER_CON_SPIS_RDY_PIN        25    // SPI READY GPIO pin number.
+#define SER_CON_SPIS_REQ_PIN        24    // SPI REQUEST GPIO pin number.
+
+#define SER_CONN_CHIP_RESET_PIN     11    // Pin used to reset connectivity chip
+
+// Arduino board mappings
+#define ARDUINO_SCL_PIN             27    // SCL signal pin
+#define ARDUINO_SDA_PIN             26    // SDA signal pin
+#define ARDUINO_AREF_PIN            2     // Aref pin
+#define ARDUINO_13_PIN              25    // Digital pin 13
+#define ARDUINO_12_PIN              24    // Digital pin 12
+#define ARDUINO_11_PIN              23    // Digital pin 11
+#define ARDUINO_10_PIN              22    // Digital pin 10
+#define ARDUINO_9_PIN               20    // Digital pin 9
+#define ARDUINO_8_PIN               19    // Digital pin 8
+
+#define ARDUINO_7_PIN               18    // Digital pin 7
+#define ARDUINO_6_PIN               17    // Digital pin 6
+#define ARDUINO_5_PIN               16    // Digital pin 5
+#define ARDUINO_4_PIN               15    // Digital pin 4
+#define ARDUINO_3_PIN               14    // Digital pin 3
+#define ARDUINO_2_PIN               13    // Digital pin 2
+#define ARDUINO_1_PIN               12    // Digital pin 1
+#define ARDUINO_0_PIN               11    // Digital pin 0
+
+#define ARDUINO_A0_PIN              3     // Analog channel 0
+#define ARDUINO_A1_PIN              4     // Analog channel 1
+#define ARDUINO_A2_PIN              28    // Analog channel 2
+#define ARDUINO_A3_PIN              29    // Analog channel 3
+#define ARDUINO_A4_PIN              30    // Analog channel 4
+#define ARDUINO_A5_PIN              31    // Analog channel 5
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // PCA10036_H
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10040.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10040.h
new file mode 100644
index 0000000..9d390a3
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10040.h
@@ -0,0 +1,177 @@
+/**
+ * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA10040_H
+#define PCA10040_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+// LEDs definitions for PCA10040
+#define LEDS_NUMBER    4
+
+#define LED_START      17
+#define LED_1          17
+#define LED_2          18
+#define LED_3          19
+#define LED_4          20
+#define LED_STOP       20
+
+#define LEDS_ACTIVE_STATE 0
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
+
+#define BSP_LED_0      LED_1
+#define BSP_LED_1      LED_2
+#define BSP_LED_2      LED_3
+#define BSP_LED_3      LED_4
+
+#define BUTTONS_NUMBER 4
+
+#define BUTTON_START   13
+#define BUTTON_1       13
+#define BUTTON_2       14
+#define BUTTON_3       15
+#define BUTTON_4       16
+#define BUTTON_STOP    16
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }
+
+#define BSP_BUTTON_0   BUTTON_1
+#define BSP_BUTTON_1   BUTTON_2
+#define BSP_BUTTON_2   BUTTON_3
+#define BSP_BUTTON_3   BUTTON_4
+
+#define RX_PIN_NUMBER  8
+#define TX_PIN_NUMBER  6
+#define CTS_PIN_NUMBER 7
+#define RTS_PIN_NUMBER 5
+#define HWFC           true
+
+#define SPIS_MISO_PIN   28  // SPI MISO signal.
+#define SPIS_CSN_PIN    12  // SPI CSN signal.
+#define SPIS_MOSI_PIN   25  // SPI MOSI signal.
+#define SPIS_SCK_PIN    29  // SPI SCK signal.
+
+#define SPIM0_SCK_PIN   29  // SPI clock GPIO pin number.
+#define SPIM0_MOSI_PIN  25  // SPI Master Out Slave In GPIO pin number.
+#define SPIM0_MISO_PIN  28  // SPI Master In Slave Out GPIO pin number.
+#define SPIM0_SS_PIN    12  // SPI Slave Select GPIO pin number.
+
+#define SPIM1_SCK_PIN   2   // SPI clock GPIO pin number.
+#define SPIM1_MOSI_PIN  3   // SPI Master Out Slave In GPIO pin number.
+#define SPIM1_MISO_PIN  4   // SPI Master In Slave Out GPIO pin number.
+#define SPIM1_SS_PIN    5   // SPI Slave Select GPIO pin number.
+
+#define SPIM2_SCK_PIN   12  // SPI clock GPIO pin number.
+#define SPIM2_MOSI_PIN  13  // SPI Master Out Slave In GPIO pin number.
+#define SPIM2_MISO_PIN  14  // SPI Master In Slave Out GPIO pin number.
+#define SPIM2_SS_PIN    15  // SPI Slave Select GPIO pin number.
+
+// serialization APPLICATION board - temp. setup for running serialized MEMU tests
+#define SER_APP_RX_PIN              23    // UART RX pin number.
+#define SER_APP_TX_PIN              24    // UART TX pin number.
+#define SER_APP_CTS_PIN             2     // UART Clear To Send pin number.
+#define SER_APP_RTS_PIN             25    // UART Request To Send pin number.
+
+#define SER_APP_SPIM0_SCK_PIN       27     // SPI clock GPIO pin number.
+#define SER_APP_SPIM0_MOSI_PIN      2      // SPI Master Out Slave In GPIO pin number
+#define SER_APP_SPIM0_MISO_PIN      26     // SPI Master In Slave Out GPIO pin number
+#define SER_APP_SPIM0_SS_PIN        23     // SPI Slave Select GPIO pin number
+#define SER_APP_SPIM0_RDY_PIN       25     // SPI READY GPIO pin number
+#define SER_APP_SPIM0_REQ_PIN       24     // SPI REQUEST GPIO pin number
+
+// serialization CONNECTIVITY board
+#define SER_CON_RX_PIN              24    // UART RX pin number.
+#define SER_CON_TX_PIN              23    // UART TX pin number.
+#define SER_CON_CTS_PIN             25    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN             2     // UART Request To Send pin number. Not used if HWFC is set to false.
+
+
+#define SER_CON_SPIS_SCK_PIN        27    // SPI SCK signal.
+#define SER_CON_SPIS_MOSI_PIN       2     // SPI MOSI signal.
+#define SER_CON_SPIS_MISO_PIN       26    // SPI MISO signal.
+#define SER_CON_SPIS_CSN_PIN        23    // SPI CSN signal.
+#define SER_CON_SPIS_RDY_PIN        25    // SPI READY GPIO pin number.
+#define SER_CON_SPIS_REQ_PIN        24    // SPI REQUEST GPIO pin number.
+
+#define SER_CONN_CHIP_RESET_PIN     11    // Pin used to reset connectivity chip
+
+
+// Arduino board mappings
+#define ARDUINO_SCL_PIN             27    // SCL signal pin
+#define ARDUINO_SDA_PIN             26    // SDA signal pin
+#define ARDUINO_AREF_PIN            2     // Aref pin
+#define ARDUINO_13_PIN              25    // Digital pin 13
+#define ARDUINO_12_PIN              24    // Digital pin 12
+#define ARDUINO_11_PIN              23    // Digital pin 11
+#define ARDUINO_10_PIN              22    // Digital pin 10
+#define ARDUINO_9_PIN               20    // Digital pin 9
+#define ARDUINO_8_PIN               19    // Digital pin 8
+
+#define ARDUINO_7_PIN               18    // Digital pin 7
+#define ARDUINO_6_PIN               17    // Digital pin 6
+#define ARDUINO_5_PIN               16    // Digital pin 5
+#define ARDUINO_4_PIN               15    // Digital pin 4
+#define ARDUINO_3_PIN               14    // Digital pin 3
+#define ARDUINO_2_PIN               13    // Digital pin 2
+#define ARDUINO_1_PIN               12    // Digital pin 1
+#define ARDUINO_0_PIN               11    // Digital pin 0
+
+#define ARDUINO_A0_PIN              3     // Analog channel 0
+#define ARDUINO_A1_PIN              4     // Analog channel 1
+#define ARDUINO_A2_PIN              28    // Analog channel 2
+#define ARDUINO_A3_PIN              29    // Analog channel 3
+#define ARDUINO_A4_PIN              30    // Analog channel 4
+#define ARDUINO_A5_PIN              31    // Analog channel 5
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // PCA10040_H
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10056.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10056.h
new file mode 100644
index 0000000..de0a265
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10056.h
@@ -0,0 +1,163 @@
+/**
+ * Copyright (c) 2016 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA10056_H
+#define PCA10056_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+// LEDs definitions for PCA10056
+#define LEDS_NUMBER    4
+
+#define LED_1          NRF_GPIO_PIN_MAP(0,13)
+#define LED_2          NRF_GPIO_PIN_MAP(0,14)
+#define LED_3          NRF_GPIO_PIN_MAP(0,15)
+#define LED_4          NRF_GPIO_PIN_MAP(0,16)
+#define LED_START      LED_1
+#define LED_STOP       LED_4
+
+#define LEDS_ACTIVE_STATE 0
+
+#define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define BSP_LED_0      13
+#define BSP_LED_1      14
+#define BSP_LED_2      15
+#define BSP_LED_3      16
+
+#define BUTTONS_NUMBER 4
+
+#define BUTTON_1       11
+#define BUTTON_2       12
+#define BUTTON_3       24
+#define BUTTON_4       25
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }
+
+#define BSP_BUTTON_0   BUTTON_1
+#define BSP_BUTTON_1   BUTTON_2
+#define BSP_BUTTON_2   BUTTON_3
+#define BSP_BUTTON_3   BUTTON_4
+
+#define RX_PIN_NUMBER  8
+#define TX_PIN_NUMBER  6
+#define CTS_PIN_NUMBER 7
+#define RTS_PIN_NUMBER 5
+#define HWFC           true
+
+#define BSP_QSPI_SCK_PIN   19
+#define BSP_QSPI_CSN_PIN   17
+#define BSP_QSPI_IO0_PIN   20
+#define BSP_QSPI_IO1_PIN   21
+#define BSP_QSPI_IO2_PIN   22
+#define BSP_QSPI_IO3_PIN   23
+
+
+// serialization APPLICATION board - temp. setup for running serialized MEMU tests
+#define SER_APP_RX_PIN              NRF_GPIO_PIN_MAP(1,13)    // UART RX pin number.
+#define SER_APP_TX_PIN              NRF_GPIO_PIN_MAP(1,14)    // UART TX pin number.
+#define SER_APP_CTS_PIN             NRF_GPIO_PIN_MAP(0,2)     // UART Clear To Send pin number.
+#define SER_APP_RTS_PIN             NRF_GPIO_PIN_MAP(1,15)    // UART Request To Send pin number.
+
+#define SER_APP_SPIM0_SCK_PIN       NRF_GPIO_PIN_MAP(0,27)     // SPI clock GPIO pin number.
+#define SER_APP_SPIM0_MOSI_PIN      NRF_GPIO_PIN_MAP(0,2)      // SPI Master Out Slave In GPIO pin number
+#define SER_APP_SPIM0_MISO_PIN      NRF_GPIO_PIN_MAP(0,26)     // SPI Master In Slave Out GPIO pin number
+#define SER_APP_SPIM0_SS_PIN        NRF_GPIO_PIN_MAP(1,13)     // SPI Slave Select GPIO pin number
+#define SER_APP_SPIM0_RDY_PIN       NRF_GPIO_PIN_MAP(1,15)     // SPI READY GPIO pin number
+#define SER_APP_SPIM0_REQ_PIN       NRF_GPIO_PIN_MAP(1,14)     // SPI REQUEST GPIO pin number
+
+// serialization CONNECTIVITY board
+#define SER_CON_RX_PIN              NRF_GPIO_PIN_MAP(1,14)    // UART RX pin number.
+#define SER_CON_TX_PIN              NRF_GPIO_PIN_MAP(1,13)    // UART TX pin number.
+#define SER_CON_CTS_PIN             NRF_GPIO_PIN_MAP(1,15)    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN             NRF_GPIO_PIN_MAP(0,2)     // UART Request To Send pin number. Not used if HWFC is set to false.
+
+
+#define SER_CON_SPIS_SCK_PIN        NRF_GPIO_PIN_MAP(0,27)    // SPI SCK signal.
+#define SER_CON_SPIS_MOSI_PIN       NRF_GPIO_PIN_MAP(0,2)     // SPI MOSI signal.
+#define SER_CON_SPIS_MISO_PIN       NRF_GPIO_PIN_MAP(0,26)    // SPI MISO signal.
+#define SER_CON_SPIS_CSN_PIN        NRF_GPIO_PIN_MAP(1,13)    // SPI CSN signal.
+#define SER_CON_SPIS_RDY_PIN        NRF_GPIO_PIN_MAP(1,15)    // SPI READY GPIO pin number.
+#define SER_CON_SPIS_REQ_PIN        NRF_GPIO_PIN_MAP(1,14)    // SPI REQUEST GPIO pin number.
+
+#define SER_CONN_CHIP_RESET_PIN     NRF_GPIO_PIN_MAP(1,1)    // Pin used to reset connectivity chip
+
+// Arduino board mappings
+#define ARDUINO_SCL_PIN             27    // SCL signal pin
+#define ARDUINO_SDA_PIN             26    // SDA signal pin
+#define ARDUINO_AREF_PIN            2     // Aref pin
+
+#define ARDUINO_13_PIN              NRF_GPIO_PIN_MAP(1, 15)  // Digital pin 13
+#define ARDUINO_12_PIN              NRF_GPIO_PIN_MAP(1, 14)  // Digital pin 12
+#define ARDUINO_11_PIN              NRF_GPIO_PIN_MAP(1, 13)  // Digital pin 11
+#define ARDUINO_10_PIN              NRF_GPIO_PIN_MAP(1, 12)  // Digital pin 10
+#define ARDUINO_9_PIN               NRF_GPIO_PIN_MAP(1, 11)  // Digital pin 9
+#define ARDUINO_8_PIN               NRF_GPIO_PIN_MAP(1, 10)  // Digital pin 8
+
+#define ARDUINO_7_PIN               NRF_GPIO_PIN_MAP(1, 8) // Digital pin 7
+#define ARDUINO_6_PIN               NRF_GPIO_PIN_MAP(1, 7) // Digital pin 6
+#define ARDUINO_5_PIN               NRF_GPIO_PIN_MAP(1, 6) // Digital pin 5
+#define ARDUINO_4_PIN               NRF_GPIO_PIN_MAP(1, 5) // Digital pin 4
+#define ARDUINO_3_PIN               NRF_GPIO_PIN_MAP(1, 4) // Digital pin 3
+#define ARDUINO_2_PIN               NRF_GPIO_PIN_MAP(1, 3) // Digital pin 2
+#define ARDUINO_1_PIN               NRF_GPIO_PIN_MAP(1, 2) // Digital pin 1
+#define ARDUINO_0_PIN               NRF_GPIO_PIN_MAP(1, 1) // Digital pin 0
+
+#define ARDUINO_A0_PIN              3     // Analog channel 0
+#define ARDUINO_A1_PIN              4     // Analog channel 1
+#define ARDUINO_A2_PIN              28    // Analog channel 2
+#define ARDUINO_A3_PIN              29    // Analog channel 3
+#define ARDUINO_A4_PIN              30    // Analog channel 4
+#define ARDUINO_A5_PIN              31    // Analog channel 5
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // PCA10056_H
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10059.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10059.h
new file mode 100644
index 0000000..bb987c1
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10059.h
@@ -0,0 +1,95 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA10059_H
+#define PCA10059_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+// LED definitions for PCA10059
+// Each LED color is considered a separate LED
+#define LEDS_NUMBER    4
+
+#define LED1_G         NRF_GPIO_PIN_MAP(0,6)
+#define LED2_R         NRF_GPIO_PIN_MAP(0,8)
+#define LED2_G         NRF_GPIO_PIN_MAP(1,9)
+#define LED2_B         NRF_GPIO_PIN_MAP(0,12)
+
+#define LED_1          LED1_G
+#define LED_2          LED2_R
+#define LED_3          LED2_G
+#define LED_4          LED2_B
+
+#define LEDS_ACTIVE_STATE 0
+
+#define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define BSP_LED_0      LED_1
+#define BSP_LED_1      LED_2
+#define BSP_LED_2      LED_3
+#define BSP_LED_3      LED_4
+
+// There is only one button for the application
+// as the second button is used for a RESET.
+#define BUTTONS_NUMBER 1
+
+#define BUTTON_1       NRF_GPIO_PIN_MAP(1,6)
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BUTTONS_LIST { BUTTON_1 }
+
+#define BSP_BUTTON_0   BUTTON_1
+
+#define BSP_SELF_PINRESET_PIN NRF_GPIO_PIN_MAP(0,19)
+
+#define HWFC           true
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // PCA10059_H
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca20006.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca20006.h
new file mode 100644
index 0000000..1ad1fa4
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca20006.h
@@ -0,0 +1,90 @@
+/**
+ * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA20006_H
+#define PCA20006_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+// LEDs and buttons definition for PCA20006 board (beacon)
+#define LEDS_NUMBER    3
+
+#define LED_RGB_RED    16
+#define LED_RGB_GREEN  12
+#define LED_RGB_BLUE   15
+
+#define LEDS_ACTIVE_STATE 0
+
+#define BSP_LED_0 LED_RGB_RED
+#define BSP_LED_1 LED_RGB_GREEN
+#define BSP_LED_2 LED_RGB_BLUE
+
+#define LEDS_LIST { LED_RGB_RED, LED_RGB_GREEN, LED_RGB_BLUE}
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define BUTTON_0       8
+#define BUTTON_1       18
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BSP_BUTTON_0   BUTTON_0
+#define BSP_BUTTON_1   BUTTON_1
+
+#define BUTTONS_NUMBER 2
+
+#define BUTTONS_LIST { BUTTON_0, BUTTON_1 }
+
+#define RX_PIN_NUMBER  24
+#define TX_PIN_NUMBER  9
+#define CTS_PIN_NUMBER 21
+#define RTS_PIN_NUMBER 11
+#define HWFC           true
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca20020.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca20020.h
new file mode 100644
index 0000000..2c86b3f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca20020.h
@@ -0,0 +1,126 @@
+/**
+ * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef PCA20020_H
+#define PCA20020_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "nrf_gpio.h"
+
+#define NRF_NUM_GPIO_PINS        32
+
+#define OSC_XL1                  0
+#define OSC_XL2                  1
+#define ANA_DIG0                 2
+#define ANA_DIG1                 3
+#define ANA_DIG2                 4
+#define IOEXT_OSCIO              5
+#define MPU_INT                  6
+#define TWI_SDA                  7
+#define TWI_SCL                  8
+#define NFC1                     9
+#define NFC2                     10
+#define BUTTON                   11
+#define LIS_INT1                 12
+#define USB_DETECT               13
+#define TWI_SDA_EXT              14
+#define TWI_SCL_EXT              15
+#define SX_RESET                 16
+#define BAT_CHG_STAT             17
+#define MOS_1                    18
+#define MOS_2                    19
+#define MOS_3                    20
+#define MOS_4                    21
+#define CCS_INT                  22
+#define LPS_INT                  23
+#define HTS_INT                  24
+#define MIC_DOUT                 25
+#define MIC_CLK                  26
+#define SPEAKER                  27
+#define BATTERY                  28
+#define SPK_PWR_CTRL             29
+#define VDD_PWR_CTRL             30
+#define BH_INT                   31
+
+// Button config
+#define BUTTONS_NUMBER           1
+#define BUTTON_START             BUTTON
+#define BUTTON_STOP              BUTTON
+#define BUTTON_PULL              NRF_GPIO_PIN_PULLUP
+#define BUTTONS_ACTIVE_STATE     0
+#define BUTTONS_LIST             { BUTTON }
+
+#define LEDS_NUMBER              0
+
+// IO expander pins
+#define SX_IOEXT_NUM_PINS        16
+
+#define SX_IOEXT_0               0
+#define SX_IOEXT_1               1
+#define SX_IOEXT_2               2
+#define SX_IOEXT_3               3
+#define SX_BAT_MON_EN            4
+#define SX_LIGHTWELL_G           5
+#define SX_LIGHTWELL_B           6
+#define SX_LIGHTWELL_R           7
+#define SX_MPU_PWR_CTRL          8
+#define SX_MIC_PWR_CTRL          9
+#define SX_CCS_PWR_CTRL          10
+#define SX_CCS_RESET             11
+#define SX_CCS_WAKE              12
+#define SX_SENSE_LED_R           13
+#define SX_SENSE_LED_G           14
+#define SX_SENSE_LED_B           15
+
+// Uart configuration for testing
+#define RX_PIN_NUMBER            ANA_DIG1
+#define TX_PIN_NUMBER            ANA_DIG0
+#define CTS_PIN_NUMBER           0
+#define RTS_PIN_NUMBER           0
+#define HWFC                     false
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // PCA20020_H
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/wt51822.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/wt51822.h
new file mode 100644
index 0000000..f5c602f
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/wt51822.h
@@ -0,0 +1,94 @@
+/**
+ * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ * 
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ * 
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ * 
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+#ifndef WT51822_H
+#define WT51822_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LEDS_NUMBER    3
+
+#define LED_1          3
+#define LED_2          4
+#define LED_3          5
+
+#define LEDS_LIST { LED_1, LED_2, LED_3 }
+
+#define LEDS_ACTIVE_STATE 0
+
+#define BSP_LED_0      LED_1
+#define BSP_LED_1      LED_2
+#define BSP_LED_2      LED_3
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define BUTTONS_NUMBER 3
+
+#define SW_1           0
+#define SW_2           1
+#define SW_3           2
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_LIST { SW_1, SW_2, SW_3 }
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BSP_BUTTON_0   SW_1
+#define BSP_BUTTON_1   SW_2
+#define BSP_BUTTON_2   SW_3
+
+#define RX_PIN_NUMBER  13
+#define TX_PIN_NUMBER  12
+#define CTS_PIN_NUMBER 14
+#define RTS_PIN_NUMBER 15
+#define HWFC           true
+
+#define SER_CON_RX_PIN              13
+#define SER_CON_TX_PIN              12
+#define SER_CON_CTS_PIN             14
+#define SER_CON_RTS_PIN             15
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif